Ernwein Sarl

Condition: used, Year of construction: 2017, For processing aluminum and PVC profiles: Bledpfxjzrk Rbe Amyok * Miter cuts possible in 3 planes, also usable as a crosscut saw. * Manual adjustment of the horizontal saw blade, allowing it to be positioned up to 20 mm in front of the vertical blade. * Notching options: right-angled, single-sided bevel, double-sided bevel, triple-sided bevel. * Processing of profiles up to 300 mm wide at 90°, sharp miter cuts up to 30°, profile height 280 mm. * Notching depth: horizontal up to 185 mm, vertical up to 210 mm at 90°. * Notching width at 90°: 300 mm. * Max. profile height 280 mm. * Swivel range of the saw blade vertically from 30° - 90° - 30° (front/center/rear) manually, positioning via a mechanical digital display. * Swivel range of the saw blade horizontally with the vertical saw blade 30° - 90° - 30°, manually, positioning via a mechanical digital display. * Material stop (tabletop) can be swivelled manually to the left and right from 30° - 90° - 30°, positioning via a scale. * Material depth stop is manually adjustable with a sliding carriage and hand clamp, positioning via a mechanical digital display.

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 124169101-03-EN-EP124, It was used for pressing corners. Bodszrhudjpfx Amyelk

Condition: ready for operation (used), functionality: fully functional, It was used for pressing corners. Bjdpezrht Hjfx Amyslk

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 124169101-03-EN-EP124, Equipment: 3rd hydraulic function, It was used for pressing corners. Bedpfx Amozrhr Neyelk

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 242724, Automatic miter cutting Overlength cutting Saw blades 500mm etc. Bjdjzqu Egepfx Amyolk

Year of construction: 2013, condition: used, Max. sawing length: 6,000 mm Max. saw blade diameter: 550 mm Windows-based control E 555 with touch display Swivel inside and outside 22.5° - 90° - 140° Tilt angles between 45 and 90 degrees Digital angle displays Bodpfx Ajzqbp Eemyjlk Moving roller conveyor Chip suction on both units Minimum quantity spray device label printers Machine is loaded free

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 9346, Machine in good condition Vertical saw blade diameter: 600mm Horizontal saw blade diameter: 500mm Notching width: at 90 degrees, processing of profiles up to 300mm Miter cuts up to 30 degrees Maximum profile height: 280mm Notching depth: at 90 degrees, horizontally up to 185mm Material stop can be swiveled to 30 degrees, 90 degrees, 45 degrees Motorized adjustment of the angle with digital display Bodszp Rnnopfx Amyolk

Year of construction: 2003, condition: reconditioned (used), functionality: fully functional, IDRACAM Software Blsdjzpv A Rjpfx Amyjk X-axis, travel: 3550 mm Y-axis, travel: 1100 mm Z-axis, travel: 425 mm Electro-spindle rotation: 0°/90°/180° Working capacity: X-axis = 3500 mm Y-axis = 540 mm with electro-spindle in the vertical position at 90° Y-axis = 460 mm with electro-spindle in the horizontal position at 0° or 180° Z-axis = 300 mm with electro-spindle in the vertical position at 90° Z-axis = 250 mm with electro-spindle in the horizontal position at 0° or 180° Spindle: ISO 30 - power: 4 kW Rotation speed: 12000 rpm Tool magazine Used machine, CE compliant

Year of construction: 1994, condition: used, We offer this used Graule AS 450 machine, model AS 450, manufactured in 1994. Type: AS 450 Rated voltage: 380 V Frequency: 50 Hz Bledpfeznk S Rox Amyek Rated current: 16 A Number of phases: 3 phases Year of manufacture: 1994 If you have any questions or require additional information, please send us a message or call.

Condition: used, Year of construction: 2017, functionality: fully functional, Graule ZS 170 - digital length stop - digital angle display - roller conveyor Bedpfxozm R U No Amyjlk - dust extraction

Condition: used, Year of construction: 2023, Graule ZS 135 - Digital length stop - Digital angle display - Roller conveyor Bsdpfx Amozm Rr Isyolk

Year of construction: 2011, condition: reconditioned (used), functionality: fully functional, HSS discs, Ø 350 mm – thickness 2.5 mm – number of teeth 280 – tooth pitch 4 mm. Bledjzl Ub Dspfx Amysk Three-phase motors with 2 speeds, 2.2/1.4 kW – 1440/720 rpm – 230/400V – 50 Hz Direct motor-to-disc drive Disc arbor, Ø 32 mm Blade rotation at 4 different speeds (15 – 30 – 45 – 90 rpm) Pneumatically rotating worktable from 90° to 45° inwards Head with vertical sliding movement on a linear guide First head, fixed Second head, mobile: automatic positioning with manual override option Positioning speed (automatic) of the mobile head: 20 m/min Positioning accuracy of the mobile head: +/- 0.1 mm Roller conveyor for the mobile head (3 m) Minimum cutting length between the two heads: 480 mm Maximum cutting length between the two heads: 5000 mm Manual kit for undercutting Oleopneumatic disc feed (adjustable feed speed – rapid approach and retraction)

Year of construction: 2007, condition: used, Vertical CNC Machining Centre designed for the machining of aluminium, PVC, steel, and light alloy profiles, ideal for the production of windows, doors, curtain walls, and light metal structures. Technical Specifications: 4 controlled axes Working table: 4,000 mm X-axis travel: 4,270 mm Y-axis travel: 1,040 mm Z-axis travel: 430 mm A-axis rotation: from -15° to +195° FOM electrospindle: 4 kW Spindle speed: 12,000 rpm Tool holder: ISO 30 Tool magazine: 4-position ISO 30 4 pneumatic clamps with automatic positioning Retractable left pneumatic stop Right pneumatic profile positioning stop Minimum quantity lubrication (MQL) system with pure oil Machine weight: 2,500 kg Applications Ideal for the machining and production of: Aluminium windows and doors Doors and windows Curtain walls Industrial aluminium profiles Blsdpfx Amozlpnleysk Aluminium and light alloy fabrication

Year of construction: 2017, condition: excellent (used), functionality: fully functional, machine/vehicle number: 9588, Reconditioned Production Ready！ Bedpozlaucjfx Amyjlk Ref Code:1027 Prisma 600 Saw blade diameter vertical: 600 mm Saw blade diameter horizontal: 500 mm Notching width: at 90° processing of profiles up to 300 mm, pointed mitres up to 30° Profile height max. 280 mm Notching depth: at 90° horizontally up to 185 mm / at 90° vertically up to 230 mm Material stop: swivel 30° - 90° - 45° Swivelling material stop with detent points and digital display Latch height motorized adjustable with digital display Motorized adjustment of angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material tensioners Coolant lubrication

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, cutting length (max.): 4,500 mm, saw blade diameter: 550 mm, Double mitre saw Elumatec DG 142/01 Cutting length min 300, max 4500 mm Max. saw blade diameter 500 mm Bodpfezi Uxdjx Amyjlk Pneumatic angle adjustment 45-90 degrees Digital angle display Automatic length positioning Moving roller conveyor Pneumatically foldable support arms Label printer

Condition: used, Max. cutting length: 4,500 mm Max. saw blade diameter: 380 mm Manual positioning of the saw assembly with digital length display Blsdpjzi A Uasfx Amyok Cutting area at 90°: 195 x 120 mm Cutting area at 45°: 135 x 120 mm Minimum quantity spray device Pneumatic material clamps Miter cuts possible on both sides 2-Hand-Bedienung

Year of construction: 2001, condition: used, Automatic feed via Elgo control 255 Bljdpfxezh Itfj Amyok For attachment to any Elumatec single-head saw (right) Max. push length: 3000 mm

Condition: new, Year of construction: 2026, functionality: fully functional, saw blade diameter: 520 mm, CNC-controlled double-head mitre circular saw with electronic saw head tilting Bjdpfx Aozhkazemyslk A high-performance circular saw designed for precise and efficient cutting of profiles made from aluminium, non-ferrous metals, and various plastics. The machine can be used for individual cuts—sawing the profile simultaneously with two saw heads—or in automatic mode, where the double-head saw operates as a single-head saw automation system. Electronic mitre adjustment of the saw heads. Mitre angles are infinitely programmable between 20° and 135°. Saw blade drive power: 2 x 2.2 kW Saw blade diameter: Ø 520 mm Maximum cut length with both saw heads operating simultaneously: 4,000 mm or 5,000 mm Maximum / minimum cut length in automatic mode: unlimited (the profile is pushed and pulled) Roller conveyor travel length: 2,300 mm Maximum space requirement: approx. 7.2/8.2 m (saw unit fully to the right) x 1.25 m x H 1.6 m Weight: approx. 1,500 kg / 1,700 kg - CNC control with a touchscreen and color graphics on a mobile operator’s panel - Import and export of CSV / LTE files (for loading cutting lists from external design software) - Graphical profile display Optionally equipped with a label printer.

Condition: reconditioned (used), functionality: fully functional, Effective cutting length: 4000 mm Blade diameter: 450 mm Pneumatic tilting of the cutting heads Bedpfszgh Umex Amyjlk Tilting angle: 90-45°

Year of construction: 2005, condition: used, Max. saw blade diameter: 550 mm Swivel inside and outside 22.5° - 90° - 140° Bjdpfx Aszf Agzjmyslk Pneumatic tilting of the angles between 45 and 90 degrees Digital Angle Indicators Feed with 2-hand operation Roller beds and length stops on request Weight: approx. 1,000 kg

Year of construction: 2000, condition: used, Saw blade diameter vertical: 600 mm Saw blade diameter (horizontal): 500 mm Ejecting width: processing of profiles up to 300 mm at 90°, mitre tips up to 30° Profile height max. 280 mm Engagement depth: at 90° horizontal up to 185 mm / at 90° vertical up to 230 mm Material stop: swiveling 30° - 90° - 45° Pivoting material stop with locking points and digital display Bedpfx Amszfkwbsyolk Motorized latch height adjustable with digital display Motorized adjustment of the angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material clamps coolant lubrication

Year of construction: 2006, condition: excellent (used), automatic bar loading system for bars up to 6800 mm in length 9-spindle milling unit cutoff saw with 550 mm diameter blade Bedpezd Nv Tsfx Amyslk automatic unloading system

Year of construction: 2013, condition: excellent (used), machine/vehicle number: 1425131305, Lightly used, in very good condition. Blsdpfx Ajzdpz Nsmyjk

Year of construction: 2022, operating hours: 1,700 h, condition: excellent (used), functionality: fully functional, cutting length (max.): 6,500 mm, machine/vehicle number: C127713, Twin head cutting-off machine, for cutting aluminium and PVC bars in various thickness and angles. Bedpfx Aozb I N Iemyolk

Condition: used, machine/vehicle number: 4038, functionality: fully functional, power: 2 kW (2.72 HP), input voltage: 380 V, input current: 9 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 80 mm, saw blade diameter: 330 mm, saw blade bore: 32 mm, actuation type: pneumatic, rotational speed (max.): 3,800 rpm, ELU Miter saw, model MGS 73 Blsdszbr Uzopfx Amyek for aluminum and plastic profiles Saw blade 330 x 3.2 x 32 mm, Z = 96 (negative tooth angle) Cutting height approx. 80 mm, Miter setting left/right +/- 45°, 2 pneumatic clamps, horizontal, 2 pneumatic clamps, vertical, Motor 2 kW (2.7 HP), 380 volts, 50 Hz, pneumatic feed system with hydraulic feed brake, 2-hand operation: left: clamping and releasing, right: saw feed, cast iron table extension on the right with stop slider and measuring scale 0 - 3,000 mm without emergency stop switch!, without motor brake! as inspected, ex works Seevetal, excluding transport, subject to prior sale.