Dauth Kom.

Condition: used, Year of construction: 2024, x-travel 650 mm y-travel 520 mm Njdpfxe Afzxme Ag Ijwn z-travel 475 mm

Condition: like new (used), Year of construction: 2016, operating hours: 4,000 h, functionality: fully functional, spindle speed (max.): 42,000 rpm, operating hours of spindle: 4,000 h, number of slots in tool magazine: 38, Note the low operating hours. This machine is in very good condition and comes with many accessories. Nodpj Afzgwsfx Ag Iown

Condition: good (used), Year of construction: 2017, operating hours: 46,510 h, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 475 mm, overall weight: 6,650 kg, spindle speed (max.): 20,000 rpm, operating hours of spindle: 7,658 h, number of slots in tool magazine: 20, Equipment: chip conveyor, Control system: Heidenhain TNC 640 Table surface: 1,100 x 570 mm Max. table load: 1,000 kg Rapid traverse rate X / Y / Z: 42 m/min Chip conveyor Measuring probe Nedpj Afymvjfx Ag Iswn Internal cooling lubricant system (IKZ)

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 610 mm, travel distance Y-axis: 5,110 mm, travel distance Z-axis: 510 mm, controller manufacturer: FANUC, controller model: Series 18i-MB, table load: 500 kg, overall weight: 6,400 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 21,000 W, number of slots in tool magazine: 24, number of axes: 3, This 3-axis Bridgeport XP3-610 (VMC-610 XP3) was manufactured in 2005. It features an X-axis travel of 610 mm, Y-axis travel of 510 mm, and Z-axis travel of 510 mm. The machine includes a worktable with dimensions of 900 × 500 mm and a maximum table load of 500 kg. If you are looking to get high-quality machining capabilities, consider the Bridgeport XP3-610 vertical machining centre we have for sale. Contact us for further details. • Worktable size: 900 × 500 mm • Max workpiece weight: 500 kg • Rapid traverse (X): 43 m/min • Rapid traverse (Y): 43 m/min • Rapid traverse (Z): 36 m/min Nwedpfx Agj Afxtgj Ijn • Electrical: 400 V, 3-phase, 50 Hz • Full load current: 50 A • Short circuit interrupt rating: 415 V / 10 kA • Manufacturer address (nameplate): Hardinge Bridgeport, Whiteacres, Cambridge Rd, Whetstone, Leic, LE8 6BD, England Technical Specification Taper Size BT 40

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, machine/vehicle number: 15405034874, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, nominal power (apparent): 20 kVA, controller manufacturer: HEIDENHAIN, controller model: ITNC 530, total height: 2,400 mm, total length: 2,500 mm, total width: 2,100 mm, table width: 560 mm, table length: 790 mm, table load: 600 kg, overall weight: 7,000 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 11,164 h, number of slots in tool magazine: 20, mount diameter: 40 mm, tool length: 300 mm, tool diameter: 80 mm, input voltage: 400 V, input frequency: 50 Hz, input current: 35 A, feed force X-axis: 5,000 N, feed force Y-axis: 5,000 N, feed force Z-axis: 5,000 N, DECKEL MAHO DMC 635 V CNC Vertical Machining Center - Tool holder: SK 40 - Input resolution X/Y/Z: 0.01 mm - Path measuring system resolution X/Y/Z: 0.001 mm Nwedpfx Ae Afulmsg Ion - Positioning tolerance in X/Y/Z with indirect measuring system: 0.020 mm, with direct measuring system: 0.008 mm - Max. tool diameter: 80 mm without free spaces, with free spaces: 130 mm - Max. tool length from spindle nose: 300 mm - Max. tool weight with automatic tool changer: 6 kg - Distance between T-slots: 100 mm - Number of clamping slots: 4 Note: without the machine vices shown in the photos! Includes the SK 40 tool holders located in the tool changer, as well as a 3D measuring probe. Note: Spindle needs to be inspected! FCA D-71679 Asperg - loaded onto a truck.

Condition: excellent (used), Year of construction: 1998, • Yang SMV 600, year of manufacture 1998 • • • Travel distances (working area): o X-axis: approx. 600 mm o Y-axis: approx. 410 mm o Z-axis: approx. 450 mm Njdpfx Age Ad U T Ue Iewn • Work table: o Dimensions: approx. 750 x 360 mm o Max. table load: approx. 250 kg • Spindle & tools: o Spindle speed: up to 6,000 rpm o Spindle mount: MAS BT 40 o Tool changer: carousel with space for 16 tools o Drive power: approx. 3.7 kW to 5.5 kW • CNC control: o Fanuc 0-MD

Condition: ready for operation (used), Year of construction: 2018, operating hours: 18,600 h, travel distance X-axis: 650 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 475 mm, controller manufacturer: SIEMENS, controller model: 840D sl, table width: 630 mm, table length: 500 mm, table load: 300 kg, overall weight: 7,420 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 21,000 W, number of slots in tool magazine: 30, number of axes: 5, This 5-axis DMG DMU 50 was manufactured in 2018. It features a working table size of Ø 630 x 500 mm and a maximum table load of 300 kg. The machine is equipped with a high-speed spindle capable of 15,000 rpm and a tool magazine with 30 positions. If you are looking to get high-quality machining capabilities, consider the DMG DMU 50 vertical machining centre we have for sale. Contact us for further details. Control System: CELOS with Siemens 840D sl Operate (21.5-inch ERGOline Multi-Touch display)Machining Type: 5-axis simultaneous machiningWorking Table / NC Swivel Rotary Table: Ø 630 x 500 mmSwivel / Rotary Axes: B: -35° to +110°, C: 360°Rapid Traverse X / Y / Z: 42 m/minMain Spindle: speedMASTER 20 - 15,000 rpm (SK40 / CAT40 taper)Spindle Power: 21 kW (40% duty cycle) / 16 kW (100% duty cycle)Tool Magazine: 30 positions (SK40)Operating Hours (Control/On-Hours): 33,089 hSpindle Hours: 18,597 hInternal Coolant Supply (IKZ): 40 bar / 600 l with paper band filter and cabin rootChip Conveyor: Scraper belt typeOptional Equipment:Renishaw PP60 optical infrared workpiece probe (OMP60)Heidenhain TT160 tool measurement / length, diameter, and breakage detection3D quickSET (kinematics check and correction)ATC (Application Tuning Cycle)Electronic handwheelManual double switch filter (25 µm)Air blast through spindle center (selectable via M-function)Rinsing gun for chip flushingThe image was generated by AI.Images available on request Technical Specification Taper Size SK 40 Nwedpfx Ae Ad Rgwsg Ijn

Condition: excellent (used), Year of construction: 2022, operating hours: 8,703 h, functionality: fully functional, machine/vehicle number: G2713-0032, overall weight: 6,800 kg, Hello. I have a 5-axis CNC milling center, a HYUNDAI KF3500/5A, for sale. The machine is connected and operational. It is in perfect technical condition!!! Low operating hours!!! Only 8703 hours. I have owned the machine since it was new!!! I am the first owner!!! Njdpfj Adqltox Ag Iewn _ Type: 5-axis Milling Center Manufacturer: HYUNDAI Wia Model: KF3500/5A _ 5-Axis Control: HYUNDAI WIA FANUC i Series _ SMART Plus Country of origin: South Korea Year of manufacture: 2022 _ Machine parameters: – Number of axes: 5 – Work table dimensions (length x width): Fi-400 x 335 mm _ 250kg – Maximum spindle speed: 15,000 [rpm] – Tool magazine: 30 pcs. BT40 – Tool measurement probe – Workpiece measurement probe – Spindle power: 18.5/11 [kW] – Axis travel (X/Y/Z) mm: 600/655/500 – A-axis travel = 150° – C-axis travel = full 360° – Rapid traverse speed (X/Y/Z) [m/min]: 36/36/30 – Total power: 25 kVa – Total weight: 6800 kg – Chip conveyor – Oil mist separator

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 710 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 500 mm, nominal power (apparent): 21 kVA, controller manufacturer: HEIDENHAIN, controller model: 407, table load: 500 kg, rotational speed (min.): 5 rpm, rotational speed (max.): 5,000 rpm, overall weight: 3,800 kg, Equipment: documentation/manual, MIKRON MILLING MACHINE, MODEL UME 710 TRAVEL: 710 x 630 x 500 mm SPINDLE: ISO 40 SPINDLE ROTATION SPEED: 5000 RPM TABLE DIMENSIONS: 1200 x 600 mm MOTORS AND DRIVES: SIEMENS CONTROL: HEIDENHAIN 407 INCLUDES OPERATING AND MAINTENANCE MANUALS AND A SET OF TOOL HOLDERS Nsdpo Adpvwsfx Ag Ijwn

Condition: not inspected (used), Year of construction: 1999, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, overall weight: 2,700 kg, Fanuc 21IM 4th axis travel distances 600 x 400 x 400 mm tool changer BT40 spindle Nsdpfx Ae Abl Rlog Iswn weight 2700 kg

Condition: ready for operation (used), Year of construction: 1998, operating hours: 23,800 h, travel distance X-axis: 600 mm, travel distance Y-axis: 525 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 426, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 25, number of axes: 3, This 3-axis DECKEL MAHO DMU 60 E was manufactured in 1998. It features an X-axis travel of 600 mm, Y-axis travel of 525 mm, and Z-axis travel of 500 mm. The machine is equipped with a 25-fold tool changer and a manually swivelable milling head, providing versatility for various machining tasks. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO DMU 60 E vertical machining centre we have for sale. Contact us for further details. • Milling Head: Manually swivelable • Tool Changer: 25-fold • Tool Holder: SK 40 • Spindle Speed: Up to 12,000 rpm • Operating Hours: Approx. 44,600 hrs. • Spindle Hours: Approx. 23,800 hrs. Nwodpfx Ae Aazq Esg Ien • Optional Equipment: Chip tray, manual touch probe, coolant unit Technical Specification Taper Size SK 40

Condition: used, Year of construction: 1998, travel distance X-axis: 600 mm, travel distance Y-axis: 430 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 32 m/min, rapid traverse Y-axis: 32 m/min, rapid traverse Z-axis: 32 m/min, feed rate X-axis: 16 m/min, feed rate Y-axis: 16 m/min, feed rate Z-axis: 16 m/min, table width: 500 mm, table length: 900 mm, table load: 500 kg, spindle speed (max.): 12,000 rpm, spindle nose: BT 40, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 80 mm, tool weight: 8,000 g, Vertical Machining Center Manufacturer: MORI SEIKI Model: SV 400 Year of Manufacture: 1998 Control System: MSD-501 Technical Specifications: X-axis travel: 600 mm Y-axis travel: 430 mm Z-axis travel: 460 mm Table clamping surface: 900 x 500 mm T-slots (quantity x width x spacing): 5 x 18 x 100 mm Table load capacity: 500 kg Distance from spindle nose to table: 150 – 610 mm Spindle speed: 12,000 rpm Torque: 166.7 Nm Tool taper: BT 40 Number of tool stations: 30 positions Max. tool diameter: 80 mm Nwodpfx Ae Aaq Umeg Isn Max. tool diameter (with adjacent pockets empty): 125 mm Max. tool length: 300 mm Max. tool weight: 8 kg Feed rate (X / Y / Z): 16,000 mm/min Rapid traverse (X / Y / Z): 32,000 mm/min The machine comes from its first owner and has low operating hours. It has been very well maintained and can be inspected under power by appointment. Technical Features & Accessories: - Through-spindle coolant (TSC) - Tool measurement system - 30-station tool changer (BT 40) Accessories, tools, and clamping devices shown are included in the scope of delivery only if explicitly stated in the additional information. Subject to changes and errors in the technical data and specifications; prior sale reserved!

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 600 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 24 m/min, nominal power (apparent): 16 kVA, controller manufacturer: Heidenhain, total height: 2,950 mm, total length: 2,500 mm, total width: 2,610 mm, overall weight: 7,000 kg, operating hours of spindle: 10,902 h, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, Mikron HEM600 Year of manufacture: 2013 Control system: Heidenhain ITNC 620 Spindle hours: 10,902 X-axis: 650 Y-axis: 530 Z-axis: 600 Rapid traverse: X, Y 30 m/min, Z 24 m/min Maximum spindle speed: 9,000 RPM Tool holder: SK40 Njdpfx Agjz Uxiij Ijwn Tool magazine: 30 positions Chip conveyor Handwheel Coolant nozzle Connected power: 16 kVA Clamping area: 850x560 mm Dimensions: approx. W=2,500 mm / D=2,610 mm / H=2,950 mm Weight: approx. 7,000 kg In very good condition / without clamping devices! Inspection possible at any time while the machine is powered on. Available from approximately the end of November 2026. Upon request and for an additional charge, we can disassemble the machine and load it onto a customer-provided transport vehicle.

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: MVH1009, travel distance X-axis: 610 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 510 mm, overall weight: 5,000 kg, spindle speed (max.): 8,000 rpm, Doosna VM50 Machining Center, fully functional, Siemens control. Spindle taper: BT40 Spindle speed: 0 – 8000 rpm Work table: 700 × 520 mm Axis travel: X=610 mm / Y=760 mm / Z=510 mm Tool magazine: ATC 12 (with arm) Equipment: Nwsdpjz S Awlofx Ag Isn Automatic tool changer ATC 12 Chip conveyor Spindle coolant system

Condition: good (used), Year of construction: 2007, functionality: fully functional, spindle speed (max.): 10,000 rpm, DECKEL MAHO DMC 635 V – Year of manufacture 2007 Njdpfxoz Symdj Ag Ijwn Technical data Manufacturer: DECKEL MAHO / DMG Model: DMC 635 V Year of manufacture: 2007 Machine type: Vertical CNC machining center Control system: Siemens Sinumerik 840D Axes: 3 (X / Y / Z) Working area: X-axis travel: 635 mm Y-axis travel: 510 mm Z-axis travel: 460 mm Table clamping area: 790 × 560 mm Max. table load: 600 kg Main spindle: Max. spindle speed: 10,000 rpm Tool holder: SK 40 Tool changer: Automatic tool changer Tool magazine: 20 positions (typical configuration) Equipment: CNC control system Siemens 840D Automatic tool changer Coolant system with external cooling No internal cooling (without coolant through the spindle) No chip conveyor Feed rate and rapid traverse: Rapid traverse X/Y/Z: 30 m/min Max. working feed rate: 20,000 mm/min Dimensions and weight: Machine weight: approx. 3,600 kg Installation dimensions: approx. 2,000 × 2,650 × 2,350 mm Total connected load: approx. 20 kVA Operating hours: approx. 24,000 Spindle hours: approx. 7,000 Images will follow.

Condition: excellent (used), Year of construction: 2013, operating hours: 10,326 h, functionality: fully functional, machine/vehicle number: +.1035, total height: 2,720 mm, total length: 3,160 mm, total width: 2,240 mm, overall weight: 4,800 kg, spindle speed (min.): 14,000 rpm, operating hours of spindle: 10,326 h, number of slots in tool magazine: 24, Equipment: chip conveyor, documentation/manual, Mikron VCE600Pro Excellent condition!! Year of manufacture: 2013 Spindle hours: 10,326 Control system: Heidenhain iTNC530 DXF file import Handwheel Travel distances: X-axis: 600 / Y-axis: 500 / Z-axis: 540 Spindle: SK40 with 14,000 rpm 24-position tool changer Regulated spindle cooler IKZ internal cooling Band filter Air cooling through the spindle Nwsdpfxjz Saglo Ag Ijn Spray ring for spindle ISO/BT 40 Direct measuring system / linear scales Tool - laser measurement Renishaw 3D probe Renishaw OMP40 Chip conveyor Top condition / without the vises shown in the pictures.

Condition: used, Year of construction: 2012, functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, rotational speed (max.): 10,000 rpm, number of slots in tool magazine: 21, Equipment: chip conveyor, FANUC ROBODRILL Alpha D21LiA5 with 4 axes Fanuc 31i control 4-axis – 360 degrees X-700mm Y-400mm Z-330mm 21-tool magazine for BT30 Nodpsz R Sdmjfx Ag Iswn max 10,000 rpm Through-spindle coolant (IKZ) Renishaw workpiece probe Renishaw tool probe Chip conveyor with pumps Very good condition, 6400 operating hours

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 540 mm, Manufacturer: Bridgeport / Hardinge Model: GX 600 Year of construction: 2008 Control system: Siemens 810D Machine type: CNC vertical machining center Axes: 3 (X, Y, Z) Travel distances: X-axis: 600 mm Y-axis: 540 mm Z-axis: 540 mm Distance from spindle nose to table: 145–685 mm Work table: Table dimensions: 750 × 540 mm Max. table load: 700 kg T-slots: 3 × 18 mm Nwodpfxjz Rz Igs Ag Ion Main spindle: Spindle speed: 8,000 rpm Spindle power: approx. 15 kW Tool holder: SK40 Tool changer: Tool magazine: 20 positions Max. tool diameter: 94 mm Max. tool length: 250 mm Max. tool weight: 6 kg Tool change time: approx. 6 seconds Feed rates: Rapid traverse X/Y/Z: 36 m/min Max. working feed rate: 12,000 mm/min Accuracy: Positioning accuracy: 0.010 mm according to ISO 230-2 Machine data: Machine weight: approx. 5,260 kg Coolant tank: 230 liters Compressed air supply: approx. 5 bar

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: 308, travel distance X-axis: 1,300 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 660 mm, rapid traverse X-axis: 18,000 m/min, rapid traverse Y-axis: 18,000 m/min, rapid traverse Z-axis: 15,000 m/min, table width: 1,600 mm, table length: 650 mm, table load: 1,850 kg, overall weight: 13,000 kg, - Year of manufacture: 1994 - Single owner, used exclusively in-house - Fully operational, powered, ready for demonstration - Control: Fanuc 0MC - X-axis machining range: 1300 mm Nwjdpfx Agsz Rvb Uj Ien - Y-axis machining range: 650 mm - Z-axis machining range: 660 mm - Table working surface: 1600 x 650 mm - Max. permissible workpiece weight: 1850 kg - Number and width of T-slots: 5 x 18 mm - Spindle speed range: 20 - 6000 rpm - Rapid traverse speed: 18000 (X) x 18000 (Y) x 15000 (Z) mm/min - Tool holder: SK50 / MAS BT50 - Tool magazine: 30 stations - Machine weight: 13,000 kg - Serial number: 308 Net price ex location Luckenwalde (Germany), not loaded, without transport

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: 208, travel distance X-axis: 800 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 18,000 m/min, rapid traverse Y-axis: 18,000 m/min, rapid traverse Z-axis: 15,000 m/min, table width: 1,100 mm, table length: 450 mm, table load: 700 kg, overall weight: 7,000 kg, - Year of manufacture: 1994 - Single owner, used in-house - Fully operational, powered on, ready for demonstration - Control system: Fanuc 0MC - X-axis travel: 800 mm - Y-axis travel: 450 mm - Z-axis travel: 510 mm - Table working area: 1100 x 450 mm - Max. permissible workpiece weight: 700 kg - Number and width of T-slots: 5 x 18 mm Nwsdpfsz Ru Utjx Ag Isn - Spindle speed range: 20 - 6000 rpm - Rapid traverse speed: 18000 (X) x 18000 (Y) x 15000 (Z) mm/min - Tool holder: SK40 / MAS BT40 - Tool magazine: 25 stations - Machine weight: 7000 kg - Serial no.: 208 Net price ex works, unloaded, at location Luckenwalde (Germany), excluding transport

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, Vertical machining center YCM 65 A / Fanuc OM -CE marking -Fanuc OM control -Ready for operation / FUNCTIONAL VIDEO available -Travel range X/Y/Z 650x410x615mm -Table dimensions 840x420mm -Spindle speed range up to 6000 rpm -Tool holder BT 40 -Tool magazine / Side turret, 16 stations -Electric handwheel -Coolant system -Motor power 7.5 Kw -Machine feet -Documentation Nwsdpez N S Sgefx Ag Ijn Dimensions: L x W x H 3.5 x 2.4 x 2.8 meters / Weight: 4500 kg Errors and omissions excepted.

Condition: ready for operation (used), Year of construction: 2024, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 330 mm, table load: 250 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 21, tool weight: 2,000 g, number of axes: 3, This 3-axis HAAS DC-1 was manufactured in 2024. It features an X-axis travel of 600 mm, Y-axis travel of 450 mm, and Z-axis travel of 330 mm. The machine includes a robust table size of 700 x 420 mm and a maximum table load of 250 kg. If you are looking to get high-quality machining capabilities, consider the HAAS DC-1 vertical machining centre we have for sale. Contact us for further details. • Working hours: 0 (showroom machine) • Spindle nose to table: max 18.9 in / 480 mm; min 5.9 in / 150 mm • Spindle: max torque 14.0 ft-lbf @ 2500 rpm / 19.0 Nm @ 2500 rpm; inline direct-drive; taper BT30; grease-packed bearings; liquid-cooled • Table: 27.6 in / 700 mm (L) x 16.5 in / 420 mm (W); T-slot width 0.550 in / 14 mm; T-slot center distance 4.92 in / 125 mm; 3 T-slots; max load 550 lb / 250 kg (evenly distributed) • Feedrates: max cutting 1200 ipm / 30.5 m/min; rapid (X/Y/Z) 1890 ipm / 48.0 m/min • Max thrust (X/Y/Z): 2054 lbf / 9137 N • Tool changer: turret; capacity 21; max tool dia (full) 2.4 in / 60 mm; max tool dia (adjacent empty) 3.1 in / 80 mm; max tool length 7.90 in / 200 mm; tool-to-tool 1.50 s; chip-to-chip 2.50 s • Max tapping speed: 5000 rpm • Coolant capacity: 40 gal / 151 L • Air: 4 scfm @ 100 psi / 113.0 L/min @ 6.9 bar; inline air hose 3/8 in; air coupler 3/8 in; min pressure 80 psi / 5.5 bar • Power: 3-phase 220 VAC (FLA 40 A) or 440 VAC (FLA 20 A) • Shipping: 100.0 in x 79.0 in x 100.0 in / 254 cm x 201 cm x 254 cm; weight 7040 lb / 3402.0 kg Nodsz Nytfspfx Ag Iown Additional equipment • CW-5200 industrial chiller • Chip conveyor Technical Specification Taper Size BT 30

Condition: good (used), Year of construction: 2011, Machine is in good working condition. Parts shown by hand not come. Njdpfx Agoz Nx Ubs Iewn

Condition: good (used), Year of construction: 2013, Travel ranges (working area) X-axis: 660 mm Nwjdpfx Agez Nktvo Ien Y-axis: 406 mm Z-axis: 508 mm Spindle nose to table: approx. 102 to 610 mm Coolant system Feed rate / rapid traverse (X / Y / Z): 28 / 28 / 28 m/min Tool changer: Magazine for up to 24 tools (SK40) Max. tool weight: 7 kg

Condition: used, Year of construction: 2002, machine/vehicle number: 810715, travel distance X-axis: 630 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: Siemens, controller model: 810D, table width: 500 mm, table length: 800 mm, table load: 500 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 24, input voltage: 400 V, type of input current: DC, Equipment: chip conveyor, documentation/manual, Vertical machining center DECKEL MAHO DMC 63V Year of manufacture: 2002 Machine number: 810715 Condition: Used Delivery terms: Free on truck Location: 57482 Wenden Availability / Collection date: The machine is expected to be available in November 2026 and must be collected on a fixed date to be agreed upon (likely in calendar week 48-2026). Payment terms: Payment in advance - by bank transfer Internal no.: 181-1 Can be inspected while running: Yes Technical data: Control: Siemens Sinumerik 810D Tool holder: SK 40 Operating hours: 76,500 (will increase slightly, as the machine is still in production until collection) Spindle hours: 24,100 (will increase slightly, as the machine is still in production until collection) Nsdoz Nhizjpfx Ag Iewn Travel distances X / Y / Z: 630 / 500 / 500 mm Table dimensions: 800 x 500 mm Table load: 500 kg Tool changer: 24-position Feed rate in X / Y / Z: 30,000 mm/min Rapid traverse rate in X / Y / Z: 30,000 mm/min Spindle speed max.: 10,000 High-pressure coolant system Chip conveyor 400 V / 30 kVA / 50 Hz Scope of delivery: Available manuals The hydraulic vices, the associated hydraulic unit, the tool holders, and the zero-point clamping system are not included in the scope of delivery! Dimensions & Weights: Installation dimensions L x W x H approx.: 4000 x 3000 x 2650 mm Weight approx.: 5000 kg If you have any questions or would like to arrange a viewing, please do not hesitate to contact us! Additional information: ►Upon request, we can offer transport to the destination. ►The quoted price is net plus VAT. ►The goods are sold with the exclusion of any warranty. ►Technical data without guarantee. ►Subject to prior sale. ❗The sale of the goods is exclusively to business customers❗