VOSS Fluid GmbH

Condition: good (used), Year of construction: 2007, Drying oven, drying cabinet, chamber dryer oven, preheating oven, heating chamber, drying oven, drying cabinet, drying and heating cabinet, universal oven -Manufacturer: Delair, Drying cabinet universal oven type SPX ED-400-TC -Usable space: 500/4070/525 mm Iiodpfxez Tfc To Ahysh -Heating power: 2000 W -Nominal temperature: 50 - 300°C -Voltage: 230 V -Dimensions: 760/720/H915 mm -Weight: 87 kg

Condition: excellent (used), I am offering a Heraeus Kendro UT 6 P laboratory oven with a digital Function Line controller. This device is designed for drying, heating, sterilization, and thermal processing of samples in laboratories, research facilities, and industrial plants. The oven is in perfect working order. The stainless steel chamber is clean and in good condition. It is equipped with a grate and guides that allow for adjusting the shelf height. Technical data: Manufacturer: Heraeus / Kendro Laboratory Products Model: UT 6 P Maximum temperature: 250°C Power supply: 230 V / 50–60 Hz Power: 1.27 kW Rated current: 5.5 A Protection class: IP20 Control: digital Function Line panel Stainless steel chamber Forced air circulation for uniform temperature distribution Condition: used, in working order Iiodjz Snfcepfx Ahyeh

Condition: excellent (used), Year of construction: 2006, machine/vehicle number: 200.170, functionality: fully functional, operating hours: 1,000 h, power: 18.75 kW (25.49 HP), input voltage: 400 V, input current: 27 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 750 °C, inner dimension length: 750 mm, inner dimension width: 600 mm, inner dimension height: 600 mm, total length: 1,500 mm, total width: 1,400 mm, total height: 1,500 mm, overall weight: 400 kg, number of chambers: 1, number of shelf rows: 1, control type: manual, actuation type: electric, Equipment: CE marking, For sale: ThermConcept recirculating oven due to business closure. Very even temperature distribution in the combustion chamber. Manual control with timer. Iisdpfx Asz Rn Hcehysh The oven was operated in production at a maximum of 500°C and is in perfect working order. The door seal is in good condition.

Condition: used, Year of construction: 2022, Offered for sale is an electric tempering oven with a maximum operating temperature of 100°C. Approx. dimensions X/Y/Z: 1800mm/1800mm/1600mm. Operation: 2020/2021 in two-shift operation. Inspection possible by arrangement. Iiodpjz Rn Dzefx Ahyeh

Condition: used, Year of construction: 2020, Offered for sale is an electric tempering oven with a maximum operating temperature of 250°C. Approx. dimensions X/Y/Z: 3000mm/2200mm/2500mm. Operation: 2020/2021 in two-shift operation. Inspection possible by arrangement. Iisdpfx Asz Rn Duehyeh

Condition: used, Year of construction: 2010, 2010 Mahler HWE 4400/2000/4400 Tempering Bogie Hearth Furnace With Pro Therm (Siemens PLC) Control & Switchgear Usable Chamber Approx Dimensions L4,400 x W4,400 x H2,000mm. Holding Time At 600°C 3–4h. Temperature Uniformity (After 4h Hold) +/- 5K. Batch Weight 15t. Furnace Atmosphere Air. Material Of Parts Steel. Heating Electric. 8 Heating Control Zones. 7 Air Circulation Fans. Installed Heating Capacity Approx 1,680kW Bogie (Car) Approx Travel Speed 50mm/s. Bogie (Car) Approx Load Capacity 15t. Number Of Doors 2. Surface Losses Approx. 30kW. Exhaust Air Volume Flow Approx. 1,000–1,200 m³/h. Exhaust Air Temperature Approx. 250 °C. Max. Ambient Temperature 40 °C. Mains Voltage 3 x 400 V Control Voltage 230 V AC / 24 V DC. S/No. 241 09 (2010). Iisdsz Nh Drepfx Ahyeh

Condition: used, Year of construction: 2010, machine/vehicle number: 1000017741, inner dimension length: 1,000 mm, inner dimension width: 840 mm, inner dimension height: 815 mm, operating temperature: 1,700 °C, usable tank capacity: 685 l, No minimum price – guaranteed sale to the highest bidder! The machine was professionally dismantled and stored. All parts and connections are labeled for reassembly. An on-site inspection is possible at any time. TECHNICAL DETAILS Furnace chamber and usable space Usable batch space (W × H × L): 840 × 815 × 1,000 mm Total length of the graphite box: approx. 1,100 mm Usable volume: approx. 685 l Operating temperature: max. 1,700 °C Operating temperature under partial pressure: max. 1,500 °C Operating temperature under vacuum: max. 1,700 °C Temperature uniformity: ± 10 K Temperature fluctuation in the steady state: ± 5 K MACHINE DETAILS Process pressure range: 1 × 10⁻² < p < 1,040 mbar Final pressure in the empty, clean, and cold furnace: < 1 × 10⁻² mbar Leak rate: < 5 × 10⁻³ mbar·l/s Power supply: 3 × 400 V, 50 Hz Permissible voltage fluctuation: max. ± 5 % Installed heating power: max. approx. 190 kW Electrical power of the pump station: approx. 14 kW Ijdpfez I Tt Isx Ahysih Cooling water flow rate: approx. 150 l/min Cooling water temperature: 20–30 °C Cooling water pressure: 2–4 bar Cooling water quality requirements: according to specification PW 800 943 ND Compressed air for valve operation: 4–5 bar Nitrogen inlet pressure: 5–7 bar Hydrogen inlet pressure: 5–7 bar EQUIPMENT Double-walled furnace chamber made of stainless steel with water cooling Internal graphite box for precise guidance of the process gases Post-cleaned graphite components Automatic control of the entire process Pump station Labeled lines and connections for easier recommissioning Note: Two internal graphite heating elements were damaged during dismantling and must be replaced.

Condition: used, Year of construction: 1982, power: 36 kW (48.95 HP), input voltage: 380 V, temperature: 950 °C, control type: manual, actuation type: manual, SIMPLON Industrial Annealing/Hardening Furnace (36 kW, max. 950 °C) For sale is a robust industrial annealing furnace from the brand SIMPLON (Albert Baumann Aue/Sa. Industrial Furnace Construction). This furnace is ideal for the thermal treatment, annealing, or hardening of metallic workpieces and is equipped with a solid furnace door that can be manually operated via a lever mechanism. Technical Data & Equipment Details: Manufacturer: SIMPLON / Albert Baumann Aue/Sa. Industrial Furnace Construction Year of Manufacture: 1982 (according to the nameplate "82") Order Number: 12362 Maximum Temperature: 950 °C Connected Load: 36 kW Voltage: 380/220 Volts Iiodoz Iv H Rspfx Ahysh Control: Integrated analog control panel with a stepped switch and analog temperature display (scale x100 °C). Condition: Used industrial quality with visible signs of wear and superficial rust on the housing, consistent with its age.

Condition: used, Two Nabertherm melting furnaces are offered. Power 1/2: 46kW/90kW, volume 1/2: 600l. Inspection possible by arrangement. Iedpfx Ahjz Irl Asyeih

Condition: used, Promeos Industrial Gas Furnace, 850 °C For sale is a high-performance, gas-fired PROMEOS industrial chamber furnace, manufactured in 2018. The unit reaches a maximum furnace temperature of 850 °C and has a rated thermal output of 300 kW. According to the available technical data, the furnace is designed to operate on natural gas types H, E, and L, as well as propane. The furnace is equipped with a lift-up door and is suitable for industrial heat treatment and production processes. Technical Data Manufacturer: Promeos Unit Designation: BA 31010.0561.0000 Year of Manufacture: 2018 Max. Furnace Temperature: 850 °C Rated Thermal Output: 300 kW Burner Heads: 2 × (3 × 40-03 CEO) Fuel: Natural gas types H, E, and L / Propane Gas Connection Pressure: 100 mbar Propane Consumption: approx. 11 m³/h Combustion Air Requirement: approx. 335 m³/h Exhaust Gas Mass Flow: approx. 453 kg/h Air Ratio: 1.35 ± 0.05 NOₓ at Rated Load: approx. 20 ppm CO at Rated Load: approx. 10 ppm Electrical Connection: 400/230 V AC, 3L/N/PE Electrical Connection Power: 4 kW Protection Class: IP54 Weight: approx. 4,700 kg Dimensions (W × D × H): approx. 3,000 × 3,000 × 3,400 mm (Height including lift-up door) Internal/Usable Space Dimensions (W × H × D): 1,500 × 950 × 1,500 mm Usable Space Volume: approx. 1.58 m³ Last Known Maintenance: 2021 "Everything from a single source: We would be happy to offer you suitable bank financing for your project." Ijdsz Ipuuspfx Ahyoih More items – new and used – can be found in our shop! International shipping costs on request!

Condition: used, PROMEOS Gas-Fired Chamber Furnace For sale is a gas-fired industrial furnace with a maximum furnace temperature of 750°C and a stated rated thermal output of 40–80 kW. The system is designed for operation with natural gas or propane and features two burner heads of type ECO 03-40. The furnace dates from 2016. The last known maintenance was performed in 2021. Equipment and Features Gas-fired industrial furnace system Maximum furnace temperature of 750°C Two burner heads Operation with natural gas or propane according to technical specifications Electrical connection with 400/230 V Industrial design Technical Data Manufacturer: PROMEOS System designation: BA 31010.0484.0000 Year of manufacture: 2016 Maximum furnace temperature: 750°C Burner heads: 2 × ECO 03-40 Rated thermal output: 4 × 10–20 kW Fuel: Natural gas type H, E and L / Propane Gas connection pressure: 50 mbar Propane consumption: approx. 3.9 m³/h Combustion air requirement: approx. 120 m³/h Exhaust gas mass flow: approx. 165 kg/h Air ratio: 1.35 ± 0.05 NOx emissions at rated load: approx. 20 ppm CO emissions at rated load: approx. 10 ppm Electrical connection: 400/230 V AC, 3L/N/PE Electrical connection power: 4 kW Protection class: IP54 Weight: approx. 4,700 kg Sound pressure level: ≤ 70 dB(A) Dimensions of the PROMEOS chamber furnace - Width: 2,800 mm - Depth: 2,700 mm - Height including lift-up door: 3,400 mm “Everything from a single source: We will be happy to offer you a suitable bank financing option for your project.” Iodpfjz Ipcxsx Ahyeih More items – new and used – can be found in our shop! International shipping costs on request!

Condition: used, Year of construction: 2000, functionality: fully functional, overall weight: 12,000 kg, Equipment: documentation/manual, FOUR IPSEN TQ 2/7 - Completely refurbished in 2010 - Usable dimensions: 910*610 H=500 - Gas-fired heating with radiant tubes - Control (load and atmosphere) via PROTHERM 500 system PRICE (incredible!): €32,000 EXW (excluding VAT) ENDOTHERMIC GENERATOR IPSEN 2018 (new retort in 2023) - Gas-fired heating - Reaction gas = natural gas Iiodpfxjz Iayuj Ahyeh PRICE: €32,000 EXW (excluding VAT) Equipment to be dismantled by the buyer (We can provide a quote for dismantling and loading onto a truck) Equipment available immediately Inspection possible (Saint Etienne 42)

Condition: used, Year of construction: 2007, functionality: fully functional, power: 30 kW (40.79 HP), input voltage: 400 V, input current: 45 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 1,320 °C, inner dimension length: 950 mm, inner dimension width: 500 mm, inner dimension height: 400 mm, overall weight: 900 kg, number of chambers: 1, Equipment: CE marking, documentation/manual, Electrically heated chamber furnace for hardening or preheating forged parts. Maximum temperature: 1,320°C Power: 30 kW Iisdpfx Ahez H I N Ijysh Heating power: 1 control zone, zone 1 = 30 kW Thermocouple: Type S with a diameter of 0.35 mm in the ceramic support tube Temperature control: JUMO dTron 304 controller Usable dimensions: 950 x 400 x 500 mm (length x height x width)

Condition: used, Padelttherm HGU 9408/800 Hearth Furnace with Recirculating Air For sale is a professional Padelttherm heat treatment system / hearth furnace with recirculating air, type HGU 9408/800. The system was used for the heat treatment of aluminum housings and is designed as a gas-fired hearth furnace with air circulation. Two chain conveyors are also part of the documented overall system. Iodpfx Ahez Hvzrsysih Technical data: Manufacturer: Padelttherm GmbH Type: HGU 9408/800 Year of manufacture: 2019 Design: Hearth furnace with recirculating air / heat treatment system Material processed: Aluminum housings Temperature / Heating capacity - Max. permissible furnace chamber temperature: 800 °C - Operating temperature: 680 °C - Heating time from 20 °C to 680 °C: approx. 5–5.75 hours - Max. gross load weight: 4,900 kg - Heating medium: Liquefied petroleum gas (LPG) - Lower calorific value: 25.89 kWh/m³ - Gas inlet pressure / flow pressure: 100 mbar - Connected load: 523 kW - Natural gas flow rate: 20.2 m³/h - Combustion air: 560 m³/h at 80–100 mbar Burners / Recirculation - 4 burners, each 130 kW - 2 with pilot burners - Burner type: Cold air burner - Automatic ignition - Ionization flame monitoring - Individual burner control - 2 burners per recirculator - 2 hot gas recirculation fans Control technology - 2 control zones, front / rear - Electrical connection: 400 / 230 V, 50 Hz - Total electrical connected load: 21 kW - Hot gas recirculators: 2 × 4.0 kW - Combustion fan: 7.5 kW - Lift-up door drive: 1.5 kW - Hearth car drive: 1.5 kW - Controller: JUMO DiconTouch - Control behavior: PID - 10 programs - Display / Operation: DiconTouch - Temperature safety limiter: 2 × JUMO safetyM STB/STW - Thermocouples: NiCr-Ni Type K, Class 1 Usable space - Usable volume: 9.41 m³ - Usable width: 1,500 mm - Usable depth: 4,200 mm - Usable height: 1,300 mm - Internal dimensions: 1,600 × 4,300 × 1,400 mm Furnace dimensions - Width: 2,900 mm - Depth: 5,200 mm - Height: 3,330 mm - Weight: approx. 13,000 kg Overall dimensions of the system: - Width: 3,270 mm - Depth including track: 10,165 mm - Height including door portal: 4,355 mm Hearth car: - Width: 1,870 mm - Depth: 4,570 mm - Height: 780 mm Chain conveyor KF1400x120x80 - W × D × H: 1,785 × 14,680 × 1,850 mm - Weight: approx. 7,900 kg KF700x120x80 - W × D × H: 1,775 × 7,280 × 880 mm - Weight: approx. 1,650 kg "Everything from one source: We will gladly offer you a suitable bank financing for your project." More items - new and used - can be found in our shop! International shipping costs on request!

Condition: used, Year of construction: 1988, A case annealing system is offered for sale. With digital temperature control. Equipped with ammonia dissociator and control cabinet. Inspection possible by appointment. Iisdpoz Hdffefx Ahyeh

Condition: new, Year of construction: 2025, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, total length: 3,000 mm, total width: 500 mm, total height: 1,300 mm, overall weight: 500 kg, Equipment: CE marking, documentation/manual, For sale is a new and unused HASUNG HS-1139 annealing tunnel furnace / continuous furnace for the professional processing of gold, silver, and other metals or precious metals. The system was originally purchased for our own production of silver bars. It was intended primarily for the continuous annealing or soft annealing of silver bars during the production process. According to the manufacturer's specifications, the tunnel furnace can also be used for the heat treatment of other metals and precious metals, such as gold. The machine was purchased directly from the manufacturer, Shenzhen Hasung Precious Metals Equipment Technology Co., Ltd., and imported to Austria. It was part of a newly acquired production line but was never put into operation by us and has 0 operating hours. The sale is taking place because, after purchasing the system, we decided against the intended production process using a protective gas. Iisdpfx Asz Dfy Eehyeh The HS-1139 operates as a continuous tunnel furnace. The workpieces are fed through the tunnel furnace via a mesh/conveyor belt. The conveyor speed can be adjusted to the respective production process via a frequency inverter. According to the operating manual, the electric heating reaches a temperature of up to 850 °C. In addition, the system has a protective gas system with ammonia decomposition and a circulating water cooling system. Technical data: Manufacturer: HASUNG Model: HS-1139 Machine type: Annealing tunnel furnace / continuous furnace Application: Annealing / soft annealing of metals and precious metals Suitable for, among others: Silver, gold, and other metals Condition: New and unused Operating hours: 0 h Power: 12 kW Voltage: 380 V Frequency: 50/60 Hz Power supply: 3-phase / AC Max. temperature: 850 °C Dimensions: approx. 3,000 × 500 × 1,300 mm Weight: approx. 500 kg Conveyor system: continuous mesh/conveyor belt Belt speed: adjustable via frequency inverter Cooling: circulating water system Protective gas system: ammonia gas with ammonia decomposition Control: temperature control, frequency control and timer function Documentation and CE documents are available. The existing operating manual and the associated CE documents, including the Certificate of Conformity and test report for the model series, including the HS-1139, will be provided with the machine. The machine is located in Lower Austria, Austria, and is currently not connected. An inspection is possible by arrangement. Collection is preferred. Loading or shipment transport can be arranged upon request. Sale due to a change in our production process.

Condition: excellent (used), Year of construction: 1999, ROHDE KE 770 S Series Kiln Five-sided heating ensures optimal temperature distribution across the entire firing range. This reliable unit is ideal for both ceramic workshops and ambitious individual creators. Key advantages: * Maximum temperature of up to 1300°C – ideal for a wide range of firing processes * Controller with 10 programs – convenience and precision in operation * New heating coils – guarantee of reaching full temperature and efficiency * Technical condition: very good – kiln ready for immediate use Technical specifications: * Chamber capacity: 770 liters * Chamber dimensions: Ijdpfez Advlox Ahyoih * height: 130 cm * width: 70 cm * depth: 83 cm * Power supply: 400 V * Power: 40 kW This is a robust and proven piece of equipment that will last for many years and ensure excellent firing results.

Condition: like new (used), Year of construction: 2014, machine/vehicle number: 618, functionality: fully functional, operating hours: 800 h, power: 80 kW (108.77 HP), input voltage: 400 V, input current: 250 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 1,200 °C, inner dimension length: 600 mm, inner dimension width: 400 mm, inner dimension height: 400 mm, total length: 4,900 mm, total width: 2,950 mm, total height: 2,900 mm, overall weight: 10,000 kg, number of chambers: 1, number of shelf rows: 1, control type: PLC-controlled, actuation type: electric, Equipment: CE marking, documentation/manual, Condition: very good; the furnace has only been used for 100 batches. The delivery includes a loading electric cart and three charging baskets. Direct sale to end-users only. W-Technology s.r.o. Ijdpfszz A Rrox Ahyeih Polní 8 79201 Bruntál Czech Republic

Condition: excellent (used), Year of construction: 2015, input voltage: 400 V, input current: 70 A, input frequency: 50 Hz, type of input current: three-phase, For sale: an industrial induction melting and holding unit, model IH-40-HNK, manufactured by INDUCTOR Kft. Iijdpfxozy Ng Re Ahyoh The unit was manufactured in 2015 and features a water-cooled, medium-frequency induction system. Technical Specifications Manufacturer: INDUCTOR Kft. Model: IH-40-HNK Year of manufacture: 2015 Power output: 40 kW Supply voltage: 3 × 400 V / 50 Hz Rated current draw: 70 A Water-cooled inductor Stainless steel, insulated melting vessel Estimated vessel capacity: approx. 200 liters Modern medium-frequency IGBT power electronics PLC/HMI control system Control cabinet weight: 190 kg Applications Aluminum melting Aluminum holding Foundry operations Metal processing plants

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, Oven for powder coating, with internal dimensions of 8200x1600x3600. Gas burner with a power output of 125-390 kW. Iedpfxozylxco Ahyjih

Condition: ready for operation (used), Year of construction: 2004, machine/vehicle number: 04493, functionality: fully functional, temperature: 1,100 °C, inner dimension length: 2,000 mm, inner dimension width: 480 mm, inner dimension height: 300 mm, The item is offered as a "Premium Listing" – the sale is qualified and curated by Maschinensucher. Used in accordance with applicable guidelines and maintenance recommendations in a large German corporation. High-performance high-temperature furnace for industrial heat treatment and manufacturing processes. TECHNICAL DETAILS Maximum temperature: 1,100 °C Heating chamber (L × W × H): 2,000 × 480 × 300 mm MACHINE DETAILS Electrical connection: 380 V Fuse rating: 125 A Power: 35 kW Dimensions (L × W × H): 2,500 × 1,000 × 1,700 mm Connection: III EQUIPMENT Mounted on a chassis with rollers CE marking Iiodpfxszyf Tas Ahysh Note: EXW – Buyer is responsible for organizing disassembly and loading.

Condition: used, Year of construction: 1999, functionality: unexamined, input voltage: 380 V, input frequency: 50 Hz, temperature: 1,300 °C, number of chambers: 1, control type: PLC-controlled, fuel type: gas, Equipment: documentation/manual, No. 1 Industrial car furnace / USED, year 1999, for heat treatments on metals (tempering, annealing, normalizing, stress relieving, preheating, sintering), and for firing ceramics and porcelain. Type: STC2400 Maximum temperature: 1300°C No. 1 motorized car No. 1 flap door Thermal power: 240,000 kcal/h Power supply: 400 V 3-phase + neutral + ground, 50 Hz Control panel type: ATR 313 No. 1 heat exchanger made of stainless steel Iisdezxxm Rjpfx Ahyjh Machine sold as is, where is.

Condition: refurbished (used), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, temperature: 1,100 °C, overall weight: 1,700 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, Electric car-bottom furnace for heat treatments on steels (normalizing, annealing, tempering, preheating, etc.) by Pagnotta Termomeccanica srl, Deruta, Italy. Iisdszxxkvopfx Ahysh Maximum temperature: 1,100°C Usable loading dimensions: 1,250x800xh1,000 mm Capacity: 1,000 liters CE Declaration of Conformity Used and refurbished machine with new electric heating elements The listed specifications are for informational purposes only; the photos depict similar machines. The furnace can be customized according to your specific heat treatment process.

Condition: ready for operation (used), Year of construction: 1996, Useful dimensions: 700 x 650 x 1,100 mm Batch weight: 800 kg Temperature: max. 1,000 °C Heating: Natural gas heated Quench: Oil/Air Equipment: Control Siemens Simatic Iiodpfxezvfnis Ahyeh

Condition: excellent (used), Year of construction: 2002, Consisting of: - 2 pieces hardening furnaces 10 Cg gross weight 400 kg - 1 piece of nitriding oven 8 Cg gross weight 400 kg Iiedpfx Aozvflujhyeh - 1 piece spray washing machine - 2 pieces tempering furnaces - 1 piece of oil quench bath 5000 liters - 1 piece manipulator All technical data for the individual systems can be found in the attached pictures.