Wilke

Year of construction: 2015, operating hours: 2,286 h, condition: ready for operation (used), travel distance X-axis: 780 mm, travel distance Y-axis: 450 mm, controller manufacturer: FANUC, controller model: Series 32i-MODEL B, overall weight: 5,000 kg, spindle motor power: 7,500 W, table length: 700 mm, table width: 400 mm, number of axes: 3, This 3-axis AMADA Techster 84 surface grinding machine was manufactured in 2015. It features an X-axis travel of approximately 780 mm and a Y-axis travel of approximately 450 mm. The machine is equipped with a powerful 7.5 kW spindle motor and a magnetic chuck size of 700 × 400 mm. If you are looking to get high-quality grinding capabilities, consider the AMADA Techster 84 machine we have for sale. Contact us for further details. • Control: FANUC Series 32i-Model B • Power Supply: 200 V • Power Supply Type: 3-Phase • Frequency: 50 Hz • Power Consumption: 23 kVA • Full Load Current: 50 A • Spindle Motor: 7.5 kW (Reinforced) • Grinding Wheel Dimensions: Ø 355 × 38–50 × 127 mm • Distance from Spindle Center to Table: Approx. 500 mm • Magnetic Chuck Size: 700 × 400 mm • Magnetic Chuck Pole Pitch: 4 mm • LED Working Area Lighting • Oil-Cooled Grinding Spindle • Compressor Air-Cooled Spindle Cooling • Temperature Control Accuracy: Approx. ±0.1 K • Automatic Touch Probe • Highskip Feed / High Speed Skip • Ethernet (LAN) Interface Fgedpfx Adozk I Afo Iod • Extended Memory Control Module • FANUC Macro B • Programmable Timer for Automatic Start/Stop and Warm-Up • CE Declaration of Conformity • Band Filter System 450 (E3.1) • Coolant Tank Capacity: Approx. 450 L • Filter Fineness: Approx. 20 µm • Emulsion Mist Extraction System 1100 • IFMC Oil Mist Separator • Machine Demonstration Possible • Grinding Spindle Hours: Approx. 2,286 h Optional Equipment, not included • WinWop Programming Software for Windows • CGS (Complete Grinding Solutions) CAM Software • Profile Dressing Unit with TPA 100 R • Pre-Dressing Unit VPA 100 R with Motorized Diamond Wheel • Table-Mounted Straight Dresser • Diamond Dressing Arbor R100-40-0.15 CVD • Regrinding Package for Diamond Wheel (Techster 84–104) • 100 mm Diamond Wheel for Pre-Dressing Unit • 700 mm Stop Bar with Prism • MPM Automatic Wheel Balancing System • Grinding Wheel Flange for Techster 64/84 (Ø 355 mm) • Modified Grinding Wheel Guard • Operating Tool Kit (Keys and Extraction Arbor)

Year of construction: 2002, condition: ready for operation (used), travel distance X-axis: 250 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 200 mm, spindle speed (max.): 60,000 rpm, number of axes: 5, This 5-axis KUGLER Micromaster MG2 was manufactured in 2002. It features an X-axis travel of 250 mm, Y-axis travel of 305 mm, and Z-axis travel of 200 mm. The machine is equipped with a high-speed Fischer Precise spindle, capable of speeds between 60,000 and 160,000 rpm, and a SERCOS real-time motion control interface. If you are looking to get high-quality grinding capabilities, consider the KUGLER Micromaster MG2 ultra-precision micro-grinder we have for sale. Contact us for further details. • Spindle speed range: 60,000-160,000 rpm • B-Axis: ±90° • C-Axis: Integrated • 5-AXIS: 5-axis kinematics (X, Y, Z, B, C) • Oil tank: Approx. 450 l • Ultra-Precision Micro-Grinder • Year of manufacture: 2002 • Condition: Used • Spindle: Fischer Precise • Spindle controller: PCF310 • Coolant system: RumA oil-cartridge system • Fischer Precise high-speed spindle • PCF310 spindle controller • RumA oil-cartridge coolant system • SERCOS real-time motion control interface • Spindle overhauled in 2019 Fgjdpszk Eipjfx Ad Iod • Vacuum table / fixtures available on request

Year of construction: 2007, condition: ready for operation (used), travel distance X-axis: 1,120 mm, number of axes: 3, This 3-axis FAVRETTO MB100 surface grinding machine was manufactured in 2007. It features a work plane of 500 x 1000 mm, providing ample space for various grinding applications. If you are looking to get high-quality grinding capabilities, consider the FAVRETTO MB100 machine we have for sale. Contact us for further details. Fgjdpfjzk D Tmjx Ad Ijd

Condition: good (used), machine/vehicle number: 64 DX, Okamoto 64 DX surface grinder. Fodpozkwudefx Ad Isgd

Year of construction: 1996, condition: ready for operation (used), travel distance X-axis: 710 mm, travel distance Y-axis: 340 mm, overall weight: 1,750 kg, total height: 1,830 mm, product length (max.): 2,500 mm, spindle speed (max.): 1,450 rpm, table width: 3,770 mm, number of axes: 3, This 3-axis Kent KGS-63 SD surface grinding machine was manufactured in 1996. It features a grinding wheel dimension of 355 × 38 × 127 mm and a grinding wheel speed of 1,450 rpm. The machine offers a longitudinal travel of 710 mm and a cross travel of 340 mm, along with a robust table size of 650 × 300 mm. If you are looking to get high-quality grinding capabilities, consider the Kent KGS-63 SD machine we have for sale. Contact us for further details. • E_(Distance_table/ram): 540 mm • Outer length: 650 mm • Outer width: 300 mm • Magnetic table: Magnetic chuck • Table load: 250 kg Fgedeziz Daspfx Ad Isd • Backlash: 0.002 mm • Grinding wheel dimensions: 355 × 38 × 127 mm • Cross and vertical feed increment: 0.002 mm • Several additional grinding wheels included in a separate storage container

Year of construction: 2005, condition: used, Degen surface grinding machine with enclosure and control panel with keypad and emergency stop. Details: Brand: Degen Machine type: surface grinding machine FS-S 4080 Design: enclosure with sliding doors and viewing windows Control panel: display, keypad, push buttons and emergency stop Work table: rectangular table with dimensions of approximately 800x400 mm X-axis travel approximately 930 mm, Y-axis travel approximately 430 mm Maximum distance spindle to table: 620 mm Grinding wheel: included Coolant system: hoses and pipes included Year of manufacture: 2005 Fgsdezggz Eepfx Ad Isd 400 Volt Condition: used

Year of construction: 2006, operating hours: 45,852 h, condition: ready for operation (used), travel distance X-axis: 380 mm, travel distance Y-axis: 280 mm, travel distance Z-axis: 280 mm, controller manufacturer: FANUC, controller model: Series 160i-MB, overall weight: 8,000 kg, total width: 1,765 mm, total height: 2,200 mm, spindle motor power: 9,000 W, product length (max.): 2,500 mm, spindle speed (max.): 6,000 rpm, number of axes: 5, This 5-axis Schneeberger Sirius HPM was manufactured in 2006. It features a powerful control unit, GE Fanuc Series 160i-MB, and operates with grinding oil. The machine is equipped with an Absolent A5 oil mist extraction system for enhanced performance. If you are looking to get high-quality grinding capabilities, consider the Schneeberger Sirius HPM surface grinding machine we have for sale. Contact us for further details. Fjdpfezdt H Nsx Ad Iegd - Control Unit: GE Fanuc Series 160i-MB / Quinto 4- Operating Medium: Grinding oil- Automation: None / Without loader- Working Voltage: 3 x 400 VAC- Kind of Current: 3L + PE- Frequency: 50 Hz- Control Voltage: 230 VAC / 24 VDC- Rating: 48 kW / 41 kW- Rated Current: 83 A- Optional Equipment: Absolent A5 oil mist extraction system (visible mounted on top of the machine)- The spindle is present but needs to be repaired and is not currently running.- The frequency converter for the spindle is also not working.

Year of construction: 1989, condition: ready for operation (used), travel distance X-axis: 1,500 mm, number of axes: 3, This 3-axis ELB Surface Grinder was manufactured in 1989. It features a working area of 1,500 mm x 500 mm, ensuring ample space for various grinding tasks. If you are looking to get high-quality surface grinding capabilities, consider the ELB Surface Grinder we have for sale. Contact us for further details. - Manufacturer: ELB- Working Area: 1,500 mm x 500 mm- Year of Manufacture: 1989- Condition: Very good / Fully functional Fgsdpfx Adjzb Et De Isd

Year of construction: 1989, condition: ready for operation (used), travel distance X-axis: 1,200 mm, number of axes: 3, This 3-axis Reform Surface Grinder was manufactured in 1989. It features a working area of 1,200 mm x 500 mm, ensuring ample space for various grinding tasks. The machine is in very good condition and fully functional. If you are looking to get high-quality surface grinding capabilities, consider the Reform Surface Grinder we have for sale. Contact us for further details. Fedpfx Aszb Eraod Isgd - Manufacturer: Reform- Working Area: 1,200mm x 500mm- Year of Manufacture: 1989- Condition: Very good / Fully functional

Year of construction: 2008, condition: used, overall weight: 5,600 kg, total length: 3,500 mm, total width: 2,500 mm, total height: 2,000 mm, Machine Number: 209311Control System: LC Control with Touch PanelTravel Paths:X: 1000 mmY: 600 mmZ: approx. 700 mm distance table–spindle centerMagnetic Clamping Plate:1000 x 500 mm - Electro-PermanentTable Load Capacity: approx. 1000 kgSpindle: Power: 7.5 kW (optional 18 kW) - Speed ControlGrinding Wheel:400 x 60 (100) x 127 mmTable Speed: 2 – 60 m/minCross Feed: 2 – 60 mm/pulse - continuous up to 5 m/minEquipment:Belt Filter System Coolant SystemPartial Enclosure Dressing UnitElectrical Connection:400 V / 50 Hz approx. 100 A Dimensions (LxWxH) approx.: 3500 x 2500 x 2000 mm Grinding length: 1,000 mm Grinding width: 700 - mm Weight approx.: 5,600 kg Fjdpfx Adjy S Nils Ijgd Grinding height: 600 - mm Year of construction: 2,008 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: Yes

Year of construction: 2014, condition: ready for operation (used), travel distance X-axis: 530 mm, travel distance Y-axis: 230 mm, number of axes: 2, Surface grinding machine manufactured in 2014. This OKAMOTO ACC 42 SA-iQ features a working surface of 450 x 200 mm and a longitudinal stroke of 530 mm. It includes a maximum weight capacity on the table of 120 kg and a standard grinding wheel diameter of 205 mm. If you are looking to get high-quality grinding capabilities, consider the OKAMOTO ACC 42 SA-iQ machine we have for sale. Contact us for further details. • Working surface: 450 x 200 mm • Magnetic chuck surface: 400 x 200 mm • Longitudinal stroke: 530 mm • Longitudinal feed: 0.1–25 m/min • Cross stroke: 230 mm • Intermittent automatic cross feed: 0.5–20 mm • Continuous automatic cross feed: 0–1000 mm/min • Manual handwheel graduation (cross): 0.0001 / 0.001 / 0.01 mm Fsdpey Rzmyjfx Ad Isgd • Vertical stroke: 357 mm • Rapid vertical feed: 0–1000 mm/min • Manual handwheel graduation (vertical): 0.0001 / 0.001 / 0.05 mm • Automatic increment range: 0.0001–0.03 mm • Distance between spindle axis and table surface: 22–303 mm • Max weight on table (including chuck): 120 kg • Standard grinding wheel diameter: 205 mm • Max peripheral speed: 1000 / 3600 m/min • Spindle motor: 2.2 kW • Hydraulic pump motor: 0.75 kW • Cross feed motor: 0.75 kW • Head elevation motor: 0.75 kW • Net machine weight: 2,090 kg • Floor dimensions: 2,270 x 2,781 mm

Year of construction: 2010, condition: ready for operation (used), travel distance X-axis: 1,500 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 700 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK, overall weight: 7,700 kg, spindle speed (max.): 2,600 rpm, table load: 1,500 kg, number of axes: 3, This 3-axis ABA ECOLINE 1507 surface grinding machine was manufactured in 2010. It features a maximum grinding length of 1500 mm and a grinding width of 800 mm, with a robust table load capacity of 1500 kg. The machine is equipped with a Siemens SINUMERIK control unit and offers impressive feed speeds of up to 60,000 mm/min for the worktable. If you are looking to get high-quality grinding capabilities, consider the ABA ECOLINE 1507 machine we have for sale. Contact us for further details. • Max. grinding length: 1500 mm • Max. grinding width: 800 mm • Distance table–spindle center: 700 mm • Tool holder: 1x grinding wheel holder • Max. feed speed grinding spindle: 2600 mm/min • Max. feed speed worktable: 60,000 mm/min • Voltage: 3 x 400 V • Total power: 90 kVA Additional equipment Fedpfx Ajy N Uprod Iogd • Magnetic table (included) • Paper band filter BF200 (not included) • Mechanical extraction LTA (not included) • Note: As stated, no accessories are included except for the magnetic table.

Year of construction: 2003, condition: ready for operation (used), travel distance X-axis: 600 mm, travel distance Y-axis: 300 mm, overall weight: 2,000 kg, table load: 300 kg, number of axes: 2, Surface grinding machine manufactured in 2003. This DEGEN FS-S3060 features an X-axis travel of 600 mm and a Y-axis travel of 300 mm. It has a table size of 600 × 300 mm and a maximum load capacity of 300 kg. If you are looking to get high-quality grinding capabilities, consider the DEGEN FS-S3060 machine we have for sale. Contact us for further details. Fjdpfx Adoy I U Hbj Isgd • Table size: 600 × 300 mm

Year of construction: 2007, condition: used, functionality: fully functional, machine/vehicle number: 2007036, Farros BSA 5185/600 Dish Head Grinding & Polishing Machine (2007) Kombi KS 1200 grinding head 1,000mm minimum grinding diameter Internal and external grinding -20º to +30º grinding head swivel Skid framed receiver mounted air compressor and dust extraction system Fgjdoy Azb Uepfx Ad Isd

Year of construction: 2013, condition: ready for operation (used), travel distance X-axis: 550 mm, overall weight: 11,000 kg, total height: 2,500 mm, table load: 1,200 kg, number of axes: 2, This AMADA MEISTER G3 surface grinding machine was manufactured in 2013 and is a robust solution for precision surface grinding applications. The machine is currently not in working condition due to an electronic/control issue. The FANUC controller was replaced; however, the machine did not return to operation after the replacement. A repair was proposed by the manufacturer’s service at an estimated cost of €15,000–€20,000, which was not carried out. As a result, the machine has been out of service and switched off for several years. Please contact us for further information. Machine Benefits Technical Machine Benefits Fjdeyz Scgspfx Ad Iegd • Suitable for heavy-duty operations. Extra Information The machine is currently not under power Dimensions Machine Depth 6400 mm

Condition: used, Year of construction: 1995, functionality: fully functional, Drum Grinding and Polishing Unit Manufacturer: UHLIG, Type UB 22 Year: 1995 Technical Data: Make: Werner Uhlig Model: UB 22 Year of manufacture: 1995 Drive: Worm gear with motor Rotational speed: 5.6 – 54 l/min Shaft diameter: 25 mm, max. torque: 34 Nm Motor power: 0.25 kW Dimensions: approx. 1.00 x 0.90 x 1.20 m Weight: approx. kg (not specified) Equipment: - Control with frequency inverter - 2 single-chamber drums, approx. 200 mm wide, diameter 260 mm - Infinitely variable drum speed - Fresh water rubber hose - Waste water drain connection All details are subject to change without notice. Fgjdpfx Adoyw Rhmo Ijd A demonstration under power is possible at any time in our exhibition hall.

Condition: good (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 2020.12.171, total width: 3,590 mm, total height: 2,910 mm, total length: 2,210 mm, grinding width: 2,600 mm, grinding belt speed: 2,400 mm/s, grinding belt length: 3,250 mm, workpiece height (max.): 80 mm, grinding belt width: 2,650 mm, air demand: 192 m³/h, Heesemann KSA 8 Wide Belt Sander 2600mm Width The sander consists of: 1. Frame Structure For mounting the transport bed, with attachment points for 1 sanding unit and 1 brushing unit. 2. Transport Bed Individual conveyor belts with feed speed adjustable from 5 to 25 m/min, controlled by frequency converter, constant working height of 920 mm. Adjustment to workpiece thickness (3 to 80 mm) by height adjustment of the entire machine top, including monitoring of the toothed belt for the lifting gear at a lifting speed of 3 mm/s, and integrated control cabinets. 3. Industrial PC 21.5" Capacitive multitouch color display, 1,920 x 1,020 pixel resolution, CF card, Windows Embedded Standard operating system, with production data acquisition (display of production and downtime). Ethernet connection available. Program memory for 1,000 programs. Motor speed values are stored and automatically set after program selection. Fsdpfx Adeywuqrj Isgd 4. Profinet interface for higher-level control 5. Longitudinal sanding unit with contact roller for calibration (steel) Balancing quality Q 1 (finely balanced) according to VDI 2060, driven by poly-V belt, maintenance-free bearings. Diameter: 350 mm Abrasive belt dimensions: 3,250 x 2,650 mm Belt speeds: 1-24 m/s Drive power: 37 kW via frequency inverter Stepless adjustment of sanding belt speeds, wear-free brake device, intermittent belt blow-off device, automatic infrared belt control, sanding belt operates against feed direction, manual grit compensation Infeed: segmented, pneumatically controlled pressure bar Outfeed: continuous, pneumatically controlled pressure bar 6. Brush roller unit Central height adjustment, includes extraction hood and pressure roller. Brush material: horsehair Diameter: 250 mm Drive power: 5.5 kW 7. Workpiece vacuum clamping system For safe transport of workpieces shorter than 750 mm in feed direction, with integrated fan. Operating voltage: 400V, 50 Hz Machine paintwork: Internal: light grey, RAL 7035 External: light grey, RAL 7035 Doors: anthracite, RAL 7016 Brush insertion side: left Terminal: front left 8. Ionizing bar, from above For dissipation of static charge, including high-voltage transformer 9. Workpiece blow-off device with rotating compressed air nozzles, at machine outfeed, including extraction hood General specifications of the sander: Sanding width: 2,600 mm Working height: 920 mm Maximum workpiece thickness: 3 to 80 mm Dust extraction: Required air speed, minimum 20 m/s Much higher extraction speeds may result in functional disadvantages. Machine underpressure approx. 1000 Pa Air requirements for: - 1 longitudinal sanding unit, roller diameter 350 (socket 1 x diameter 330) 103.0 m³/min - 1 brushing unit, diameter 250 (socket 1 x diameter 206) 38.0 m³/min - Workpiece blow-off (2 sockets x diameter 120) 28.0 m³/min - Conveyor belt blow-off (socket 1 x diameter 160) 24.5 m³/min - Exhaust air from fan for workpiece vacuum clamping system (socket 1 x diameter 180) 30.5 m³/min Total air requirement: 224.0 m³/min

Year of construction: 2001, condition: ready for operation (used), travel distance X-axis: 530 mm, travel distance Y-axis: 175 mm, overall weight: 1,250 kg, total height: 2,129 mm, spindle motor power: 1,500 W, product length (max.): 1,940 mm, table load: 120 kg, table width: 1,317 mm, number of axes: 3, This 3s OKAMOTO ACC 450 DXA was manufactured in 2001. It features a grindable surface of 450 × 150 mm and a longitudinal travel of 530 mm, making it suitable for various grinding applications. With a maximum load capacity of 120 kg on the table, this machine offers robust performance. Consider the opportunity to buy this OKAMOTO ACC 450 DXA surface grinding machine. Contact us for further details. • Grinding table • Grindable surface: 450 × 150 mm • Distance spindle–table: 60–510 mm • Max load on table: 120 kg • Wheel and spindle • Wheel diameter: 205 mm • Wheel peripheral speed: 2,400 m/min • Spindle motor power: 1.5 kW / 2P • Motors • Hydraulic pump motor: 0.75 kW / 4P • Cross feed motor: 0.75 kW / 3P • Headstock up/down motor: 0.4 kW Fodjyiffgopfx Ad Ijgd

Year of construction: 2000, condition: ready for operation (used), overall weight: 8,100 kg, number of axes: 3, This 3-axis ROSA ERMANDO STEEL 11.7 CN was manufactured in 2000. It features an ECS 2401 control system, a grindable size of 1,000 x 750 mm, and a grinding height of 600 mm. The machine can handle a table load up to 1,400 Kg and offers a longitudinal speed of 1–38 m/min. Consider the opportunity to buy this ROSA ERMANDO STEEL 11.7 CN surface grinding machine. Contact us for more information about this machine. Fsdpfx Adoygl Hzs Isgd • Grindable size: 1,000 x 750 mm • Cross travel: 750 mm • Longitudinal travel: 1,000 mm • Grinding height: 600 mm • Longitudinal speed: 1–38 m/min • Usable table surface: 1,100 x 500 mm • Permissible table load: 1,400 kg • Wheel dimensions: Ø 400 x 30 mm • Rotation speed: 1,450 rpm

Year of construction: 2018, condition: ready for operation (used), overall weight: 1,900 kg, total height: 1,900 mm, spindle motor power: 3,700 W, product length (max.): 1,950 mm, number of axes: 3, This 3-axis Proth PSGS 3060 BH / S1 surface grinding machine was manufactured in 2018. It features a table size of 300 × 600 mm and an electromagnetic chuck of the same dimensions. The grinding wheel measures 355 × 38 × 127 mm. Powered by a 3.7 kW spindle motor, this robust machine weighs approximately 1,900 kg. Consider the opportunity to buy this Proth PSGS 3060 BH / S1 surface grinding machine. Contact us for more information. • Table size (L × W): 300 × 600 mm • Electromagnetic chuck size (L × W × H): 300 × 600 × 74 mm • Grinding wheel size (Ø × width × bore): 355 × 38 × 127 mm Additional equipment • Optional: Tools Fgedpfxeydpn Rj Ad Ijd • Optional: Clamping devices

Year of construction: 2008, condition: ready for operation (used), overall weight: 8,500 kg, total height: 2,470 mm, This Kent KGS 615 WMA1 surface grinding machine was manufactured in 2008. It features a robust table clamping area of 1500 x 600 mm, supporting a maximum load of 1300 kg. The machine is equipped with a powerful grinding spindle motor of 7.5 kW and a standard grinding wheel size of 355 x 50.8 x 127 mm. Consider the opportunity to buy this Kent KGS 615 WMA1 surface grinding machine. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Table clamping area: 1500 x 600 mm / max. Table load (with magnet): 1300 kg longitudinal table travel: 1600 mm / table slots, number/width: 3/16 pcs/mm / table feed: 7-25 m/min • Vertical y distance from table to spindle center: 600 mm / vertical handwheel pitch: 0. 002 mm / feed per handwheel revolution: 0. 5 mm / automatic grinding feed ahd: 0. 005-0. 04 mm / automatic grinding feed wm1: 0. 002-0. 2 mm / vertical rapid traverse: 230 mm/min / transverse z travel: 660 mm / transverse feed per stroke: 0. 1-12 mm / transverse rapid traverse: 1250 mm/min / handwheel pitch: 0. 02 mm / feed per handwheel revolution: 5 mm • Grinding spindle motor: 7. 5 kw / grinding spindle speed: 1450 rpm • Grinding spindle motor: 7. 5 kw / grinding spindle speed: 1450 rpm Dimensions Fgsdpfx Adsx D H Rhe Ijd Machine Depth 6200 mm

Year of construction: 2020, condition: ready for operation (used), This 5-axis TGT V2 Maxima was manufactured in 2020 and is in mint condition. It features an ELBARON grinding mist extraction system and includes collets for diameters up to 20 mm. Extras include robot pallets, spare spindle, and sanding wheel packs. Consider the opportunity to buy this TGT V2 Maxima. Contact us for more information. Additional equipment • ELBARON grinding mist extraction system / Robot pallets / Collets for all common diameters up to 20 mm / Spare spindle / Sanding wheel packs and associated sanding wheels (Approx. 25 pieces) Machine Benefits Technical Machine Benefits • Operating time: 42000 minutes • Machine in mint condition / original spare spindle available, eliminating waiting times for spindle maintenance / full description and installation manual included Extra Information Spindle bearing: Front/rear: 7010 CTYN DU L P4 (NACHI)/ Lubricating grease: Kluberisoflex Super LDS 18 or NBU 25 (2.75 cc per bearing)/ Tightening torque: 58 Nm (front/rear)/ Concentricity: ≤ 0.002 mm/ Motor: LENZE 7.5 kW (10 hp), 4-pole/ Speed: 0-4500 rpm (frequency converter)/ Belt: PJ-12-1143L (GATES/FENNER)/ 2 Feed drive unit - X- and Z-axis/ Stroke: X-axis: 300 mm/ Z-axis: 680 mm/ Ball screw: Type: Fixed - Supported/ Bearing: 25TAB06DBFLP4 (NACHI, 62 Nm tightening torque)/ Ball screw spindle: BIF 3210A-5 (THK, Ø32 mm, pitch 10 mm)/ Motor: BECKHOFF AM8053-0G20 (11.4 Nm)/ Clutch: SFC 050 DA2-24B-20B (MIKI PULLEY)/ 3 Feed drive unit - Y-axis Stroke: 300 mm/ Ball screw: Bearing: 25TAB06DBFLP4 (NACHI, 62 Nm)/ Ball nut specification: BIF 3210-5 (THK)/ Motor: BECKHOFF AM8061-0GB1 (12.8 Nm)/ Coupling: SFC 060 DA2-20B-32B (MIKI PULLEY)/ / Rotatable table - axis A/ Bearing: 7014 CTYN DUL P4 (NACHI)/ Tightening torque: 255 Nm (front), 62 Nm (rear)/ Radial runout: ≤ 0.002 mm/ Grease: Kluberisoflex Super LDS 18 (3.6 cc per bearing)/ Fjdpfx Ajx D Hi Rod Iogd 5th Rotary Table Assembly - C Axis/ Bearing: YRT 100 (GOLDBULL)/ Assembly torque: 14 Nm (3-stage: 40% → 70% → 100%)/ Motor: ORION_230/140 (NIMBLE/UCAM), 238 Nm/ Encoder: RENISHAW/ main coolant system/ Flow rate: 85 L/min/ Tank volume: 400 liters/ Pump: RKM206 (Rajamane, 1.5 kW, 6-stage)/ Filtration: Paper filter Para mol N 334/150 (0.01 mm)/ lubrication layout/ Oil pump: ELU-2700 (Cenlub, 3 liters, 415V AC)/ Metering Cartridge: 320410-3 (LUBE)/ steady rest (manual)/ Vertical stroke: 3 mm/ Diameter range: Ø3-Ø22 mm/ Carriage travel: 120 mm

Year of construction: 1990, condition: excellent (used), O F F E R Subject to prior sale and errors excepted, we can offer you, without obligation, the following ex-stock: D E G E N Manual Cutting, Pointing, and Cylindrical Grinding Machine for Ejector Pins Model: T Year of manufacture: 1990 _____ Grinding carriage center height: approx. 200 mm Grinding wheel Ø x bore: 200 x 30 mm Grinding wheel speed: approx. rpm Grinding wheel drive power: approx. kW Workpiece headstock center height: 160 mm Workpiece headstock longitudinal adjustment: approx. 100 mm Workpiece headstock transverse adjustment: approx. 200 mm Workpiece headstock swiveling either side: approx. 2 x 30° Collet chuck capacity: 0.5 – 20 mm Weight: approx. 500 kg Accessories / Special equipment: • Workpiece headstock swiveling for pointing and deburring Fgedsxzuuvjpfx Ad Ijd • Collet chuck with approx. 10 different collets • Plexiglass safety guard for grinding wheel • Compact, free-standing on sturdy base • Optional cross-slide feed unit Condition: good to very good – under power, ready for demonstration Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice We look forward to receiving your order. Further tool grinding machines available from stock – please enquire!

Condition: good (used), We are selling a used robotic grinding and polishing system. The system is in good used condition. The system includes: - 1x YASKAWA MH20 industrial robot with NX100 controller - 2x belt grinding machines for grinding belts with a circumference of 3,500 mm - 2x polishing machines with oscillation and feed for polishing discs with a maximum diameter of 500 mm - 1x loading table for pallets with dimensions (LxW): 1,200 x 600 mm - 1x control cabinet Fgsdpexby Sgefx Ad Ijd If you have any questions, please do not hesitate to contact us!

Condition: good (used), Year of construction: 2019, operating hours: 3,500 h, functionality: fully functional, machine/vehicle number: RSPL 19, We are selling a robotic long grinding and polishing system. With this system, parts can be ground and polished. - 1 x tool changer on the robot side - 1 x servo-driven table for holding 9 parts, 360-degree rotation, 9 meters in length - 1 x polishing unit 450mm x 600mm, with liquid polishing compound feed - 1 x brushing unit for brushes 400mm x 600mm, with liquid polishing compound feed - 1 x grinding unit for abrasive belts, length 1,000mm and 150mm width, with oil mist device consisting of three low-pressure spray guns - 3 x racks for tools - 1 x truing device for polishing wheels - 1 x measuring plate for polishing unit Fgsdpowdnb Rsfx Ad Ied - 1 x control cabinet with PLC The robot and the linear axis have already been sold. If you have any further questions, please feel free to contact us!