Chauvin-Mecagraphic

Condition: excellent (used), Year of construction: 2008, Machine Overview Makino V22, manufactured in 2008, with a 40,000 rpm spindle, HSK-E32, and 60 tool positions. This compact 3-axis machining center offers travels of 320 × 280 × 300 mm and a Makino Pro-5 control system based on Fanuc. Technical Data Manufacturer / Model: Makino V22 Year of Manufacture: 2008 Axes: 3 Travel (X / Y / Z): 320 / 280 / 300 mm Control System: Makino Pro 5 (Fanuc System) Spindle Speed: 40,000 rpm Tool Interface: HSK-E32 Cooling: External air and external cooling Redpfx Apsz Tc Srodoch Table: Makino T-slot table Maximum Table Load: 100 kg Rapid Traverse: 20 m/min Tool Magazine: 60 positions Operating Hours: 20,712 hours Spindle Counter: 2,266 hours Fuse Rating: 63 A Footprint (L × W × H): 1,500 × 2,000 × 2,250 mm Connection, Weight, and Dimensions Electrical Connection: 400 V / 50 Hz Machine Weight: 4,200 kg Equipment and Scope of Delivery Length measuring device (hybrid) Measuring probe: Marposs and handwheel REVEN X-CYCLONE CE17-3 Kraft-& Bauer CO₂ fire extinguishing system Hot-shot shrinking device Tool holders and other related photo accessories All accessories belonging to the machine, as shown in the offer photos, are included. Technical data subject to change without notice. Errors and prior sale are reserved. The characteristics and scope of delivery agreed upon in the purchase contract shall be binding.

Condition: good (used), Year of construction: 2017, Traverses X Y Z: 355 x 305 x 455mm, Table 457 x 381mm, Spindle speed 50 – 6000 rpm, Spindle taper BT30, Spindle Motor 3Hp, Rsdpoz St Hwjfx Apdsch Prototrak TMX Control, 8 Station ATC, coolant, Low Volt light.

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 300 mm, travel distance Y-axis: 260 mm, travel distance Z-axis: 300 mm, controller manufacturer: Siemens, controller model: Sinumerik 828d, total height: 2,300 mm, total length: 1,800 mm, total width: 1,000 mm, overall weight: 2,300 kg, spindle speed (min.): 100 rpm, spindle speed (max.): 20,000 rpm, operating hours of spindle: 2 h, number of slots in tool magazine: 16, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, Demonstration model, manufactured in 2025. The machine has not yet cut any chips and has never been filled with coolant. Includes a tool length gauge (wired). Rodez Rz S Eepfx Apdech

Condition: ready for operation (used), Year of construction: 2018, operating hours: 14,396 h, travel distance X-axis: 350 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL, controller model: SmoothX, workpiece height (max.): 350 mm, total height: 2,840 mm, total width: 1,900 mm, table load: 200 kg, overall weight: 7,100 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, tool weight: 8,000 g, product length (max.): 3,060 mm, number of axes: 5, This 5-axis Mazak VARIAXIS J-500/5X was manufactured in 2018. It features a maximum workpiece diameter of 500 mm and a maximum table load of 200 kg. The machine is equipped with a 19-inch colour touchscreen and a maximum spindle speed of 12,000 rpm. If you are looking to get high-quality simultaneous 5-axis machining capabilities, consider the Mazak VARIAXIS J-500/5X vertical machining centre we have for sale. Contact us for further details. • Cutting time (“cutting only”): 14,396 h 54 min • Working capacity and travels • Max workpiece diameter: 500 mm; height: 350 mm • A-axis tilt: -120° to +30°; C-axis rotation: ±360° • A/C indexing increment: 0.0001° • Rapid traverse X/Y/Z: 30,000 mm/min • Max cutting feed X/Y/Z: 30,000 mm/min • A-axis indexing time: 0.6 s per 90° • C-axis indexing time: 0.55 s per 90° / 1.05 s per 180° • Guideways: Roller linear guideways • Table and clearances • Tilting/rotary table with A and C axes • Table size: 500 × 400 mm • T-slot table (as specified in final configuration) • Spindle nose to table surface, table horizontal: 50–560 mm • Spindle nose to table, table vertical: 40–550 mm • Spindle • Spindle chiller; spindle cooling oil tank: 16 L • Programmable spindle orientation in 1° increments • Tool changer and magazine • ATC with recovery function; digital magazine display; external magazine operating panel Rodpfx Aez Ipzujpdoch • Tool selection: fixed magazine addresses with automatic shortest-path selection • Max tool length: 300 mm • Max tool diameter with adjacent tools: 90 mm; with adjacent pockets empty: 130 mm • Chip-to-chip time: 6.20 s • Measuring and probing • Automatic tool length measurement and tool breakage detection • G37 automatic tool length measurement function • Absolute positioning system • MAZA-CHECK system • Preparation for RMP600 workpiece probe • Coolant and thermal management • Through-tool high-pressure coolant (~15 kgf/cm² ≈ 14.7 bar), flow ~35 L/min • Coolant tank: 300 L • Coolant washdown system • Cooling for X/Y/Z-axis ball screws • Control and software • MAZATROL conversational and EIA/ISO programming; simultaneous 5-axis control in EIA/ISO • G00 Slope Constant; Smooth restart; Tilted machining plane; Inverse Time Feed • Extended work offsets: 300 pairs; Variable macros: 600 variables • Polar coordinate programming; Tornado machining cycle • High-speed machining and smoothing; Geometric compensation for rotary axes • Seamless Corner Control; Variable Acceleration Control • Interfaces: USB, LAN, SD memory card • Safety, enclosure, compliance • Full working-area enclosure with top cover • Interlocked operator door; working-area lighting • Intelligent Safety Shield (ISS) • CE marking • Automation/operation aids • Automatic machine power on/off and warm-up Additional equipment • Right-side hinged-belt chip conveyor for steel machining • European-market power transformer • Machine installation kit • Polish manuals and safety labels Technical Specification Taper Size SK 40 Through-spindle Coolant Yes

Condition: ready for operation (used), Year of construction: 1998, Chiron FZ08 S - 5 axis vertical machining center Year: 1998 Technical details: CNC control: FANUC 21i-M Travel ranges: X-axis: 350 mm Y-axis: 250 mm Rcedpfxsz Iniko Apdeh Z-axis: 250 mm A-axis: 360° for corresponding 5-axis/rotary axis models. B-axis / swivel axis: -20° / +110°. Table size / clamping surface: 550 x 300 mm, Tool magazine: 12 tools Spindle mount: HSK-A32 Spindle speed: up to 1500 rpm Spindle motor power: 3.7 kW Machine weight: 1,820 kg Dimensions: 2050 x 2250 x 1900 mm Accessories/options: - 10 pieces tool holders, HSK-A32 - Hoffmann 4/5 axis rotary table - Documentations - Coolant tank - Precision vice Under power in our warehouse, possible to see it anytime!

Condition: used, Year of construction: 2004, turning diameter 320 mm Rjdpfxez Icz Ue Apdsch turning length 305 mm control Fanuc weight of the machine ca. 3500 kg

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 300 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, controller manufacturer: MITSUBISHI, spindle speed (max.): 15,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 300 mm Travel range, Y-axis: 250 mm Travel range, Z-axis: 250 mm Spindle speed range: 60–15,000 rpm Spindle speed control: stepless Tool changer: vertical Magazine capacity: 12 Tool interface: SK 30 Workpiece clamping area: 400 × 250 mm MACHINE DETAILS Control system: MITSUBISHI Jaw width: 100 mm EQUIPMENT Fixed angular table Dual-pallet changer 4 × Allmatic vices Various tool holders SK 30 Electronic handwheel Full-protection enclosure with sliding doors and interior lighting Coolant system with paper band filter Coolant system Two-color signal light Rcjdpfxsz Hxb Uo Apdjh Chip conveyor 6 × Machine feet Operating manuals

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2650207, travel distance X-axis: 300 mm, travel distance Y-axis: 260 mm, travel distance Z-axis: 300 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, controller manufacturer: Siemens, controller model: 828d, total height: 2,360 mm, total length: 2,020 mm, total width: 1,000 mm, table width: 260 mm, table length: 560 mm, table load: 150 kg, rotational speed (max.): 20,000 rpm, overall weight: 2,180 kg, spindle speed (max.): 20,000 rpm, spindle motor power: 5,500 W, spindle nose: BT30, number of spindles: 1, number of slots in tool magazine: 16, tool length: 200 mm, tool diameter: 63 mm, tool weight: 3,000 g, input voltage: 380 V, type of input current: three-phase, Equipment: documentation/manual, SYIL X5 CNC Vertical Machining Center – New Machine Compact CNC vertical machining center, designed for precision machining of single parts as well as for small and medium-sized production runs. Equipment: Schneeberger mineral cast chassis Siemens SINUMERIK 828D CNC control THK linear guides and ball screws BT30 spindle, 20,000 rpm 16-tool automatic tool changer Coolant system Automatic centralized lubrication Fully enclosed work enclosure Work area lighting New machine, available in stock, selling price CHF 43,900 (excluding VAT) The machine can be viewed and tested in our showroom in Le Locle, Switzerland. Rjdpjz Eh E Tsfx Apdoch Commissioning, training, and after-sales service are provided directly by Swiss Machines Tools, the SYIL distributor in Switzerland. Please contact us for detailed technical specifications, available equipment, and options.

Condition: not inspected (used), Year of construction: 2011, operating hours: 12,000 h, functionality: unexamined, machine/vehicle number: 1200 000043 7, TECHNICAL SPECIFICATIONS CNC control: Siemens Sinumerik 840D Number of axes: 5 axes Travels X-axis travel: 120 mm Y-axis travel: 120 mm Z-axis travel: 200 mm A-axis: -10° to +120° C-axis: 360° continuous Rotary table Diameter: 190 mm Maximum load: 10 kg A-axis speed: up to 100 rpm C-axis speed: up to 150 rpm Spindle Maximum speed: 40,000 rpm Power: approx. 6 kW Maximum power: approx. 7.7 kW Torque: approx. 1.6 Nm High-frequency spindle with ULTRASONIC technology Feed rates Rcedoz Efpcjpfx Apdsh Rapid traverse X/Y/Z: up to 10 m/min Tools Tool holder interface: depending on machine configuration Maximum tool length: approx. 130 mm Maximum tool diameter: approx. 49 mm Tool magazine: depending on configuration General data Power supply: 400 V Connected power: approx. 25 kVA Compressed air: approx. 6 bar Machine weight: approx. 1,800 kg TECHNOLOGY The DMG SAUER ULTRASONIC 10 combines high-precision 5-axis CNC machining with ultrasonic-assisted machining technology. This technology is particularly well-suited for machining difficult materials such as: Ceramics Carbide / hard metal Glass Corundum Technical materials and hard and brittle materials Machine particularly suitable for the micromachining, watchmaking, medical/dental, optics, and high-precision application sectors. Subject to errors and changes in technical data.

Condition: excellent (used), Year of construction: 2000, number of slots in tool magazine: 12, Equipment: chip conveyor, documentation/manual, Chiron FZ08W Magnum vertical machining center Sinumerik 840D control Max spindle speed: 15,000 rpm X = 300 mm Y = 250 mm Z = 250 mm 2 x 4th axis Peiseler RT 100 Tool holder: HSK 32 ATC: 12 positions Rcjdpfx Aozznm Eopdoh The machine is currently in production and can be inspected at any time. The machine is in very good technical condition. I am offering a 3-month start-up warranty.

Condition: ready for operation (used), Year of construction: 2010, travel distance X-axis: 220 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 280 mm, table load: 10 kg, overall weight: 1,800 kg, spindle speed (max.): 40,000 rpm, number of axes: 5, This 5-axis DMG Ultrasonic 10 was manufactured in 2010. It features a maximum spindle speed of 40,000 rpm and a travel of 220 x 200 x 280 mm. The machine is equipped with a Siemens 840D solutionline control and has a maximum table load of 10 kg. If you are looking to get high-quality machining capabilities, consider the DMG Ultrasonic 10 vertical machining centre we have for sale. Contact us for further details. Rsdpfx Apoy H Ea Nedsch • Working hours: 19,000 h • T-slots: 60 • Spindle interface: HSK-A32 • Power: 25 kVA

Condition: ready for operation (used), Year of construction: 2009, operating hours: 16,616 h, travel distance X-axis: 120 mm, spindle speed (max.): 36,000 rpm, number of axes: 5, This 5-axis DMG Sauer Ultrasonic 10 + PH 2 | 120 was manufactured in 2009. It features a main drive speed of 40,000 rpm and an output performance of 6 kW. The machine operates efficiently with a cooling system and has a protection type of IP 54. If you are looking to get high-quality ultrasonic machining capabilities, consider the DMG Sauer Ultrasonic 10 + PH 2 | 120 vertical machining centre we have for sale. Contact us for further details. • Manufacturer: SAUER GmbH Ultrasonic • Component: Main Drive, 40,000 rpm • Operational mode: S1 • Speed 1: 36,000 rpm • Speed 2: 42,000 rpm • Output performance 1: 6 kW • Output performance 2: 6 kW • Torque 1: 1.7 Nm • Torque 2: 1.3 Nm • Voltage 1: 400 V • Voltage 2: 420 V • Current 1: 10 A • Current 2: 9 A • Frequency 1: 1,200 Hz • Frequency 2: 1,400 Hz • Connection: Star • Protection type: IP54 • Vibration quality: < 1 mm/s • Cooling: Water Rcjdpjy Hhwkofx Apdsh • Rotor moment of inertia: 0.000252 kg·m² • Insulation class: F • Connection diagram: 635 • Max. ambient temperature: 40 °C • Thermal protection: KTY 84-130 and PTC

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 185 mm, travel distance Y-axis: 125 mm, travel distance Z-axis: 200 mm, total height: 1,892 mm, total width: 875 mm, overall weight: 570 kg, spindle speed (max.): 5,000 rpm, spindle motor power: 750 W, product length (max.): 1,730 mm, number of axes: 3, This 3-axis EMCO PC MILL 125 was manufactured in 2000. It features an X-axis travel of 185 mm, Y-axis travel of 125 mm, and Z-axis travel of 200 mm. The machine includes an automatic tool changer with 10 stations and a clamping area of 420 x 125 mm. If you are looking to get high-quality machining capabilities, consider the EMCO PC MILL 125 vertical machining centre we have for sale. Contact us for further details. • Tool changer: Automatic, 10 stations • Tool holder: SK 30 (DIN 2080 / DIN 69871) • Feed rate (X/Y/Z): 5–4000 mm/min • Rapid traverse: 4500 mm/min Rcodpfx Apjy E S Uqodoh • Clamping area: 420 x 125 mm • Max. workpiece weight: 10 kg • Power supply: 230 V / 50 Hz Technical Specification Taper Size SK 30

Condition: used, control Siemens Sinumerik 840D table load 0,7 t work piece spindle speed 200 - 2300 U/min total power requirement 12 kW ATC, 10 positions Chip conveyor Rcedpfx Apeyqt E Tedeh The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 164, travel distance X-axis: 250 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 300 mm, controller model: GE FANUC Series 16i-M, spindle speed (max.): 14,000 rpm, TECHNICAL DETAILS X-axis travel: 250 mm Y-axis travel: 200 mm Z-axis travel: 300 mm Number of axes: 3 Max. spindle speed: 14,000 rpm Table length: 400 mm Table width: 250 mm Number of T-slots: 3 Distance between T-slots: 80 mm T-slot width: 14 mm Tool magazine capacity: 48 Tool holder: HSK E40 Working feed rate: 20 m/min Rapid traverse: 30 m/min Max. feed force: 3,700 N MACHINE DETAILS Control: GE FANUC Series 16i-M Resolution: 1 µm Compressed air supply: 6 bar Electrical connection: 50 Hz 3x 400 Volt Spindle drive power: 10.4 kW Total power requirement: 18 kVA Dimensions & Weight Dimensions (L x W x H): 2,100 x 1,630 x 2,265 mm Machine weight: approx. 1,700 kg Required floor space: approx. 2 m² Rcjdpfoyhnzkjx Apdsh EQUIPMENT Vice: Jaw width 100 mm Set of tool holders Coolant system Lighting

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 200 mm, travel distance Y-axis: 150 mm, travel distance Z-axis: 250 mm, controller manufacturer: EMCO, total height: 1,100 mm, table load: 10 kg, overall weight: 400 kg, spindle speed (max.): 5,000 rpm, spindle motor power: 1,100 W, tool weight: 700 g, product length (max.): 1,135 mm, number of axes: 3, This 3s EMCO Concept Mill 105 was manufactured in 2016. It features a maximum spindle speed of 5000 rpm and a spindle motor power of 1.1 kW, providing efficient machining capabilities. The machine has a table size of 420 × 125 mm and a maximum table load of 10 kg. If you are looking to get high-quality milling capabilities, consider the EMCO Concept Mill 105 vertical machining centre we have for sale. Contact us for further details. • Distance spindle nose to table: 95–245 mm Rcedpoyhcfkofx Apdsh • Table size: 420 × 125 mm • T-slots: 2 × 11 × 90 mm • Max spindle torque: 4.2 Nm • Rapid traverse (X/Y/Z): 5 m/min • Feed rate: 0–5 m/min • Max feed force X/Y: 2000 N • Max feed force Z: 2400 N • Positioning accuracy (X/Y/Z): 0.005 mm • Repeatability: 0.005 mm • Tool stations: 10 • Max tool diameter: 55 mm • Max tool length: 50 mm • Tool change time (T1–T2–T3): 9.7 / 5 / 7.5 s • Connected load: 1.4 kW • Required air pressure: 6 bar

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 300 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, controller manufacturer: FANUC, controller model: 21i-M series, spindle speed (max.): 10,000 rpm, spindle motor power: 3,700 W, number of axes: 3, This 3-axis CHIRON FZ08W was manufactured in 2006. A vertical CNC machining center featuring a Fanuc 21i-M series control, it offers X, Y, Z travels of 300 mm, 250 mm, and 250 mm respectively. It includes a table size of 550 x 300 mm, a spindle speed of 10,000 rpm, and a 12-position tool magazine. Consider the opportunity to buy this CHIRON FZ08W vertical machining center. Contact us for more information. Rodpfxjygl D He Apdsch • Condition: Used • Status: Good • Table size: 550 x 300 mm • Permissible load: 200 kg • Tool magazine: 12 positions Additional equipment • Chip evacuator

Condition: good (used), Year of construction: 2010, Machining Centre Sugino Xion-II-5AX-CE Manufacturer: Sugino Machine Limited Japan Model: Xion II 5AX CE Year of manufacture: 2010 Number of axes: 5 Travel distance X axis: 300 mm Travel distance Y axis: 300 mm Travel distance Z axis: 200 mm A axis swiveling range: -90° to +90° C axis rotation: 360° Maximum tool diameter: 40 mm Rsdsx Hqwgjpfx Apdsch Maximum tool weight: 15 kg Spindle speed: 40,000 rpm Tool holder: HSK-E32 Positioning accuracy X, Y, and Z axes: 0.002 mm Repeatability X, Y, and Z axes: ±0.001 mm Machine weight: 2,800 kg No guarantee is given for the correctness, completeness, or currentness of the information provided.

Condition: good (used), Year of construction: 2013, Machining Center Fanuc Robodrill α-D21SiA5 Manufacturer: Fanuc Model: Robodrill α-D21SiA5 Year of manufacture: 2013 Axes: 5 Travel X axis: 300 mm Travel Y axis: 300 + 100 mm Travel Z axis: 330 mm Swivel range A axis: -90° – +90° Rotary axis C: 360° Rcjdpsx Hqwasfx Apdjh Table load capacity: 200 kg Maximum tool diameter: 40 mm Maximum tool weight: 3 kg Maximum total tool mass: 33 kg Number of tools: 21 Spindle speed: 24,000 rpm No liability is assumed for the accuracy, completeness or timeliness of the information provided.

Condition: good (used), Year of construction: 2012, Hasegawa PM150 Machining Center Manufacturer: Hasegawa Model: PM 150 Year of manufacture: 2012 Number of axes: 4 Travel X axis: 150 mm Travel Y axis: 225 mm Travel Z axis: 200 mm Swivel axis: YES Rapid traverse X, Y, Z: 30 m/min Table load capacity: 80 kg Rsdpfx Aox Hqv Nepdjch Table working surface: 300 × 260 mm T-slot table: 12H7 × 5 Spindle taper: HSK E32 Spindle speed: 100 to 30000 rpm Tool magazine: 10 tools Max. tool size: Ø50 mm Memory capacity: 5120 m 2048 kB Minimum input increment: 0.1 µm Interface: RS232C Number of programs: 63 No guarantee is given for the accuracy, completeness, or timeliness of the information provided.

Condition: ready for operation (used), Year of construction: 2011, operating hours: 9,339 h, travel distance X-axis: 120 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 200 mm, controller manufacturer: SIEMENS, controller model: Sinumeric 840D, total height: 2,253 mm, table load: 10 kg, overall weight: 1,800 kg, spindle speed (max.): 40,000 rpm, number of axes: 5, This 5-axis DMG ULTRASONIC 10 was manufactured in 2011. It features a Siemens Sinumeric 840D control, a spindle with 40,000 rpm max speed, and a tool magazine with 60 slots. The machine offers a compact footprint and includes options like a DMG PP-400 Infrared probe and RS NC-4 tool measurement. If you are looking to get high-quality milling capabilities consider the DMG ULTRASONIC 10 machine we have for sale. Contact us for more information about this machine. Additional equipment • Workpiece Measurement: DMG PP-400 Infrared probe • Tool Measurement: RS NC-4 • Coolant Conditioning Equipment: KM 10 Machine Benefits Rodpfx Apjx D Naxedjch Technical Machine Benefits • Surface area: less than 2 m² • Required space (lxwxh): 4100x3700x2300 mm • Machine on time: 2773 hours • A axis: -10° to 120° • C axis: 360° • Feedrate – feed speed range: up to 10000 mm/min • Repeatability in x / y / z: p8 μm Extra Information Workpiece NC Table with Clamping Surface: ø 190 mm ed of Rotary Axes (A / C): 100 rpm / 150 rpm Positioning Accuracy (A / C Axis): ± 5 Tools Tool Magazine: 60 items, chain magazine Chip-to-Chip Replacement Time: 15 seconds Media Compressed Air Required: 6 bar Average Air Consumption: 20 m³/hour Working Voltage: 400V (N / PE) / 50A Dimensions Machine Depth 775 mm

Condition: good (used), Alzmetall BAZ 15 CNC – Vertical Machining Center • 3 axes • Heidenhain control For sale is an Alzmetall BAZ 15 CNC, a compact and robust vertical machining center equipped with a Heidenhain control system. The machine is still operational and can be inspected under power. It is in well-maintained, technically flawless condition. Technical Data Manufacturer: Alzmetall Model: BAZ 15 CNC Application: Milling Machine type: Vertical machining center Control system: Heidenhain Weight: 3,200 kg Table load: 500 kg Axes: 3 X travel: 600 mm Y travel: 400 mm Z travel: 600 mm Spindle speed: 9,000 rpm Tool magazine: 24 positions If interested, simply write or call. Rcodpfexxxu Usx Apdsh

Condition: ready for operation (used), Year of construction: 1999, travel distance X-axis: 300 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, Vertical milling center Chiron FZ08W Rodpfoxd T Rzsx Apdoch Fanuc 21i-M Max RPM: 15,000 rpm High-pressure spindle through-cooling X = 300 mm Y = 250 mm Z = 250 mm The machine was originally supplied with 2 x 4th axis Peiseler RT 100, but the 4th axes have now been removed. Tool interface: HSK 32 ATC: 24 positions Serial: Yrzzng Machine is currently in production and can be inspected at any time. The machine is in very good technical condition. I offer a 3-month startup warranty.

Condition: used, Year of construction: 2002, travel distance X-axis: 305 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 100 mm, controller manufacturer: Fanuc, controller model: 21-M, spindle speed (max.): 12,000 rpm, spindle nose: SK 40, number of slots in tool magazine: 12, Vertical Machining Center Manufacturer: CHIRON Model: FZ15S Year of manufacture: 2002 Control system: Fanuc 21-M Technical specifications: - X-axis: 305 mm - Y-axis: 610 mm - Z-axis: 100 mm - Spindle speed: 12,000 rpm - Tool holder: SK 40 - Number of tool stations: 12 positions In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale. Rcsdpfx Aswth Snepdeh

Condition: used, Year of construction: 2012, Hasegawa PM 150 CNC machining center TECHNICAL DATA Spindle Spindle nose: HSK-E32 Speed: 100 - 30`000 rpm Spindle motor: 3.0 / 4.5 kW Tool changer Capacity: 10 Tool - tool change time: 1.8 sec Travel distances X-axis: 150 mm Y-axis: 225 mm Z-axis: 200 mm 4th axis: Lehmann EA-507, 360° Rcsdpfxeu E El Ie Apdjh OFFER SCOPE U.A: (non-exhaustive list): Hasegawa PM 150 CNC machining center 10-position tool changer Lehmann EA-507 rotary axis transformer Fire extinguishing system Complete operating documentation Exact scope of supply according to photo gallery We assume no liability for the accuracy, completeness and timeliness of the information provided