ELSA cnc service GmbH

Condition: used, Year of construction: 2019, x-travel 406 mm y-travel 305 mm z-travel 254 mm control Haas table-size 730 x 305 mm table load 227 kg Distance spindle nose and table SK 40 no. of tools in the magazine 10 Stück turning speeds 6000 U/min Ledpey T R Rgsfx Ac Isab power capacity 5,6 kW rapid travel x/y/z 15,2 m/min feed 16,5 m/min weight 1,55 t dimensions 1,95 x 1,8 x 1,8 m 3 axis Vertical Machining Center in very good condition. Only 800 h Machine power on. - vakuum plate

Condition: excellent (used), functionality: fully functional, Equipment: documentation/manual, For sale is a vertical 3-axis CNC machining center, Hurco BMC20, with Hurco Ultimax control. The machine is ideally suited for toolmaking, single-part production, and small batch sizes. Technical data: Lasdpfxsy T Hkpj Ac Isb Control: Hurco Ultimax Travel in X: approx. 560 mm Travel in Y: approx. 355 mm Travel in Z: approx. 355 mm Table size: approx. 760 × 355 mm Tool holder: SK40 / CAT40 Spindle speed up to 6000 rpm 16-tool automatic tool changer Main motor: approx. 7.5–10 HP Rapid traverse: approx. 10 m/min Machine weight: approx. 2800–3200 kg Equipment: - various accessories Condition: used Machine is complete Inspection possible while powered on

Condition: used, Year of construction: 1998, x-travel 1120 mm y-travel 510 mm z-travel 510 mm control Mazatrol M Plus spindle turning speed range 0-7000 U/min tool taper Cat 40 Ledpfxoy Ty Eas Ac Isab tool piece magazine with 24 Plätzen max. table load 500 kg table dimensions (lengthxwidth) 1460 x 510 mm Overall size 3600x2700x2590 mm machine weight ab. 5850 kg Equipment/Accessories: - 4 vices - 1 chuck - 18 tool holders with tools - Transport locks - USB flash drive with data backup - Technical documentation

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: AB1052, travel distance X-axis: 560 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 410 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 560 mm, feed length Y-axis: 410 mm, feed length Z-axis: 410 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, controller manufacturer: Siemens, controller model: Sinumerik 840D, workpiece length (max.): 650 mm, workpiece width (max.): 450 mm, workpiece height (max.): 450 mm, workpiece weight (max.): 250 kg, total height: 2,500 mm, total length: 2,000 mm, total width: 3,000 mm, table width: 450 mm, table length: 650 mm, table load: 250 kg, rotational speed (min.): 12,000 rpm, rotational speed (max.): 12,000 rpm, overall weight: 4,000 kg, tool length: 200 mm, tool diameter: 77 mm, tool weight: 5,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, This machine was not manufactured for mass production. Accuracy: +-0.015 mm. It has been regularly maintained, both electronically and mechanically; for example, it received new ball screws and linear guides two years ago. Equipped with an oil mist separator. It is in daily use until the end of June 2026 (and can be inspected while in operation until then). Laedpfx Aey Tv Nnsc Isb

Condition: excellent (used), Year of construction: 2015, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, controller manufacturer: FANUC, controller model: 31iB5, table width: 550 mm, table length: 380 mm, Equipment: documentation/manual, FANUC ALPHA T14iFb VERTICAL MACHINING CENTER, MANUFACTURED IN 2015 EQUIPPED WITH FANUC 31iB5 CONTROL ELECTRONIC HANDWHEEL TRAVEL: X 500, Y 400, Z 330 MM Laedpfxoy Tvnwe Ac Ijb TABLE SURFACE: 550 x 380 MM DIRECT DRIVE SPINDLE, 24,000 RPM SPINDLE COOLANT SYSTEM

Condition: not inspected (used), Year of construction: 2005, machine/vehicle number: 107.32.99.158, Work area Longitudinal x: 530 mm Transverse y: 450 mm Vertical z: 450 mm Lodpfxey Tnhpe Ac Isab Rotary table Table diameter: 400 Table load capacity: 200 kg Swivel range: +122/-100 Swivel speed: 20 rpm Rotational speed: 30 rpm High-performance machining spindle Exchangeable spindle, replacement date 7/2025, manufacturer Step-Tec AG, Switzerland, SK40 Max. spindle speed: 12,000 rpm Feed drives Recommended max. working feed rate: 15 m/min Rapid traverse speed: 22 m/min Feed force x and y/z: 5,000 N Tool magazine Magazine capacity: 30 Max. tool diameter: 90 mm Max. tool length: 250 mm (Manual 350 mm) Max. tool weight: 6 kg Quality data Positional tolerance according to DIN/ISO230-2/97: 0.008 mm Control system: with digital control: iTNC 530 Weight Machine weight: 6,500 kg Year of manufacture: 2005

Condition: ready for operation (used), Year of construction: 2023, travel distance X-axis: 550 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 460 mm, table load: 300 kg, overall weight: 2,800 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 11,000 W, tool weight: 6,000 g, number of axes: 3, This 3-axis Optimum Optimill F 105 was manufactured in 2023. It features an X-axis travel of 550 mm, Y-axis travel of 305 mm, and Z-axis travel of 460 mm. The machine includes a robust table size of 800 x 320 mm and a maximum table load of 300 kg. If you are looking to get high-quality machining capabilities, consider the Optimum Optimill F 105 vertical machining centre we have for sale. Contact us for further details. Ljdpfoy Tl Ndsx Ac Isab • Electrical connection: 3 x 400 V ~ 50 Hz, 15 kVA • Spindle: • Power S1: 7.5 kW • Power S6-30%: 11 kW • Torque S1: 48 Nm • Torque S6-30%: 70 Nm • Lubrication / coolant system: • Coolant pump power: 650 W • Tank capacity: 120 L • Compressed air: • Min. connection: 0.6 MPa (6 bar) • Air consumption: 0.1 – 0.15 m³/h at 0.6 MPa • Recommended air quality: ISO 8573.1 class 2 • Air consumers: tool changer forward/backward; tool clamp/unclamp; optional rotary table clamping • Compressed air service unit: • Drainage filters: 40 μm • Housing: Polycarbonate • Max. pressure: 1.5 MPa • Recommended oil: ISO VG32 • Lubricator quantity: 90 ml • Dewatering: manual • Air connection thread: 3/8” • Axis travels: • Z distance spindle–table: 100 – 600 mm • Accuracy: • Repeat accuracy: ±0.008 mm • Positioning accuracy: ±0.01 mm • Servo motor torques: • X: 8 Nm • Y: 8 Nm • Z: 11 Nm • Table: • Size: 800 x 320 mm • T-slots (size/number/pitch): 14 / 3 / 100 mm • Max. feedrate: 10,000 mm/min • Tool changer: • Positions: 12 • Max. tool diameter: 70 mm • Max. tool length: 300 mm • Tool change time: 7 s • Environmental conditions: • Operating temperature: 19 – 21 °C • Relative humidity: 5 – 80% non-condensing • Pressure: 700 – 1060 hPa • Storage temperature: 5 – 45 °C Technical Specification Taper Size ISO 40

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 450 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 400 mm, controller manufacturer: FANUC, controller model: 21i-MB, total height: 2,515 mm, total width: 2,800 mm, table load: 100 kg, overall weight: 3,100 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 5,000 W, number of slots in tool magazine: 16, tool weight: 4,000 g, product length (max.): 3,130 mm, number of axes: 3, This 3-axis FAMUP MCP 45 E vertical machining centre was manufactured in 2004. It features an X-axis travel of 450 mm, Y-axis travel of 300 mm, and Z-axis travel of 400 mm. The machine is equipped with a spindle speed range of 50 – 10,000 rpm and a maximum table load of 100 kg. If you are looking to get high-quality machining capabilities, consider the FAMUP MCP 45 E machine we have for sale. Contact us for further details. Pallet / table Laedpfxey Tl A Do Ac Ieb • Table size: 400 x 300 mm • T-slots: 2 x 14 x 80 mm • Central bore: Ø50 H6 • Pallet change time: 8 sSpindle • Motor power S6 40%: 5 kW • Continuous power S1: 3.7 kWAxis performance • Working feedrate X/Y/Z: 10,000 mm/min • Rapid feedrate X/Y/Z: 30,000 mm/min • Working thrust S1 X/Y: 2,000 N • Working thrust S1 Z: 3,300 NMeasurement system • Indirect measuring systemAccuracy • Positioning accuracy X/Y/Z: ±5 µm • Repeatability X/Y/Z: ±1.5 µm • Reversal accuracy: 3 µmTool changer • Tool selection: Random • Max. tool diameter: Ø63 mm • Max. tool length: 150 mm • Tool change time: 1.7 s • Chip-to-chip time: 2.5 sGeneral data • Total installed power: 10 kW Technical Specification Taper Size ISO 30

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 5351126, controller model: Siemens 840D, number of slots in tool magazine: 42, An optional tool package worth €10,000 can be purchased for €3,500! TECHNICAL DETAILS Tool holder: SK-40 Tool magazine: 42 positions MACHINE DETAILS Lodpfey S S N Isx Ac Ieab Control system: Siemens 840D EQUIPMENT Tool breakage monitoring Filter unit: Knoll, type VRF 300/800 Chip conveyor: Knoll, type 340 K-1/100

Condition: excellent (used), Hartford 1020S machining center Heidenhain CNC control Year 2005 Lodjy S Avxspfx Ac Isab In good working order, currently in operation.

Condition: used, Year of construction: 2007, 2007 Haas Super Minimill Vertical Machining Centre with Haas CNC Control Table Dimensions 914mm x 305mm with (3) T Slots. Max Table Load 227kg. 'X' Axis Approx 405mm, 'Y' Axis Approx 305mm, 'Z' Axis Approx 250mm. BT40 Spindle Taper. Spindle Speeds 0-10,000 RPM. Spindle Motor 11.25kW. Spindle Nose to Table Min/Max Approx 102mm/350mm. 10 Station ATC. S/No. 1060226. Ledpfx Acoy Sx Uqo Isab With 150mm Width of Jaw Machine Vice. Programmable Backstop. Coolant System. Machine Light. Dimensions of Machine Approx 1,700mm x 1,550mm x 2,200mm High. Weight Approx 1,560kg. Power Supply 415 Volt, 3 Phase. Includes (7) Assorted BT 40 Arbors with Cutters & Assorted Machine Fixtures.

Condition: excellent (used), Year of construction: 2013, operating hours: 11,000 h, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 435 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, nominal power (apparent): 54 kVA, torque: 117 Nm, controller manufacturer: Fanuc, controller model: i Series, workpiece height (max.): 200 mm, workpiece diameter (max.): 300 mm, total height: 300 mm, total length: 2,465 mm, total width: 2,835 mm, table width: 200 mm, table load: 60 kg, rotary table diameter: 200 mm, overall weight: 5,500 kg, spindle speed (min.): 120 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 11,000 h, coolant supply: 20 bar, spindle nose: DIN40, number of spindles: 1, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 125 mm, tool weight: 8 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 2013 Doosan DNM 200/5AX 5 Axis CNC Machining Centre Used 2013 Doosan DNM 200/5AX (4+1) 5-axis CNC machining centre with Fanuc i Series control, probe, tool holders, spindle chiller, transformer, swarf conveyor and only 11,000 run time hours. Manufacturer: Doosan Model: DNM200/5AX Machine Type: 5 Axis (4+1) Machining Centre Year: 2013 Control: Fanuc Series i Control Hours: 11,000 Run Time Hours Machine Description 2013 Doosan DNM 200/5AX CNC Machining Centre, a compact, high-performance 4+1 - 5-axis vertical machining centre ideal for precision engineering, toolmaking, aerospace, medical, motorsport, mould and die, and complex component machining. This machine is fitted with a Fanuc i Series CNC control and has only 11,000 run time hours, making it an excellent opportunity for manufacturers looking for a reliable used 5-axis machining centre with strong capability, premium features and valuable accessories included. The Doosan DNM 200/5AX is well known for combining compact footprint, rigid construction and 5-axis positioning. It is ideal for reducing setups, machining complex parts and increasing productivity compared with conventional 3-axis machining. Key Features 2013 Doosan DNM 200/5AX 4+1 5 Axis CNC Machining Centre Fanuc i Series Control Only 11,000 Run Time Hours Includes Renishaw OMP60 probe Includes tool holders Includes spindle chiller Includes transformer Includes swarf conveyor Compact 5-axis machining solution Ideal for complex component machining Lajdpey St Sdofx Ac Iob Technical Specifications X Axis Travel: 400 mm Y Axis Travel: 435 mm Z Axis Travel: 500 mm A Axis Travel: 150 Deg (+30 to -120Deg) C Axis Travel: 360 Deg Table Diameter: 200 mm Max Load on Table: 60 kg Max Workpiece: 300mm Dia x 200mm High Spindle Speed: 12,000 rpm Spindle Taper: DIN40 Pullstud: Nikken PS-806 Tool Capacity: 30 Station ATC Rapid traverse (X, Y): 36000mm/min Rapid traverse (Z): 30000mm/min Rapid traverse: (A - tilt axis) 20 rpm Rapid traverse: (C – rotary axis) 30 rpm Maximum feedrate: (X, Y, Z) 15000mm/min Maximum feedrate: (A, C) 7200 deg/min Feedback system: Absolute encoder Max Tool Diameter: 125mm Max Tool Length: 300mm Max Tool Weight: 8kg Spindle motor AC: 11/18.5kW Axis motor (XYZ): AC 4.0kW Axis motor (A axis): AC 3.0kW Axis motor (C axis): AC 1.6kW Power Requirements: 54.0 kVA Air Pressure: 6kgf/cm2 Machine Dimensions: 2465 x 2835 x 3091mm Approx. Machine Weight: 5,500 kg Run Time Hours: Approx. 11,000 hours Included With This Machine Renishaw OMP60 Probe Tool holders Spindle chiller Transformer Swarf conveyor Fanuc i Series CNC control Why Buy This Doosan DNM 200/5AX? This machine is a strong choice for companies searching for a used 5 axis CNC machining centre, used Doosan machining centre, Doosan DNM 200/5AX for sale, or compact 5-axis vertical machining centre. The 4+1 machining capability allows users to machine multiple faces of a component in fewer setups, helping to reduce handling time and increase production efficiency. With a compact table, high spindle speed and Fanuc control, this machine is particularly suited to small to medium batch production and complex prismatic parts. Applications This Doosan DNM 200/5AX is suitable for: Aerospace components Medical components Motorsport parts Toolroom machining Mould and die work General subcontract machining Complex 4+1 machining Notes: *Specifications are given in good faith but not guaranteed*

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 183-89, CNC Vertical Machining Center Make: CHIRON Group Model: CHIRON FZ 12 W Year of manufacture: 1999 Machine No.: 183-89 Lajdpfxey Sr Ikj Ac Ijb Typical technical specifications of the CHIRON FZ 12 W: Machine type: Control system: usually Siemens 840D or Heidenhain X-axis travel: approx. 550 mm Y-axis travel: approx. 300 mm Z-axis travel: approx. 425 mm Table size: approx. 660 × 350 mm Table load capacity: approx. 500 kg Spindle speed: depending on version, 10,000 – 20,000 rpm Tool holder: SK40 or HSK-A63 Tool changer: 12–24 positions Rapid traverse: up to 60 m/min Main spindle power: approx. 10–15 kW Coolant system Central lubrication Fully enclosed safety cabin Machine weight: approx. 4,500–5,500 kg The machine is part of CHIRON's well-known FZ series and is especially suited for high-speed aluminum and steel machining.

Condition: excellent (used), Year of construction: 2014, operating hours: 4,300 h, functionality: fully functional, Control: MAZATROL SMART Table dimensions: 900 x 430 mm T-slots in the table 3x18x125 mm Max. table load: 500 kg X-travel: 560 mm Y-travel: 430 mm Z-travel: 510 mm Max. spindle speed: 12000 rpm (Direct drive) Taper: SK40 Rapid traverses X/Y/Z: 42 / 42 / 42 m/min Feed rates: 1 - 8000 mm/min Drive power: 18.5 / 11 kW Power requirement: 400V / 50-60 Hz / 32A Weight: 4600 kg Dimensions LxWxH: 2080 x 2616 x 2780 mm Accessories, Equipments - MAYFRAN chip conveyor - Coolant system - Spindle through air - ITS (Intelligent thermal shield) heat compensation system Lsdpfxoy Snnms Ac Ieab - Tool presetter - Signal tower - Transformer The machine can be found in almost new condition. Unter power in Hungary.

Condition: excellent (used), Year of construction: 2012, Haas Minimill Laodpjy Smyuofx Ac Ieb Year of manufacture: 2012 Taper: BT 40 Spindle speed: 10,000 rpm Video available!

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 1764, controller manufacturer: Fanuc, No minimum price – guaranteed sale to the highest bidder! MACHINE DETAILS Control: Fanuc Lsdpfxoy Sluqe Ac Ieab EQUIPMENT Accessories as shown in the pictures

Condition: used, Year of construction: 2005, Mazak Variaxis 730-5X CNC Vertical Machining Centre. S/No. 567181684 (2005). Country of Origin: Japan Laodjy Sha Aspfx Ac Ijb Location: These lots are located in Dundee, Scotland, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: ready for operation (used), Year of construction: 2009, travel distance X-axis: 480 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 430 mm, controller manufacturer: FANUC, controller model: 0i-MC, total height: 2,323 mm, total width: 1,767 mm, table load: 300 kg, overall weight: 2,820 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 7,500 W, number of slots in tool magazine: 20, tool weight: 6,000 g, product length (max.): 2,168 mm, number of axes: 3, This 3-axis Bridgeport GX 480 was manufactured in 2009. It features an X-axis travel of 480 mm, Y-axis travel of 400 mm, and Z-axis travel of 430 mm. The machine includes a robust table size of 600 x 400 mm and a maximum table load of 300 kg. If you are looking to get high-quality machining capabilities, consider the Bridgeport GX 480 vertical machining centre we have for sale. Contact us for further details. • Table size: 600 x 400 mm • Spindle nose to table: 150–580 mm • T-slots: 3 x 125 mm • Rapid traverse (X/Y/Z): 36 m/min • Working feed: 12 m/min • Tool magazine: 20 positions (carousel), random bi-directional (shortest path) • Max tool diameter (adjacent/free): 94 / 130 mm • Max tool length: 250 mm • Chip-to-chip time: 5.5 s Lsdey Sg Eqopfx Ac Isab Additional equipment • Cooling system: 20 bar high pressure • Tank wash: included • Chip conveyor: screw type Technical Specification Taper Size BT 40

Condition: good (used), FOR SALE High-Speed Machining Center FANUC ROBODRILL Model: FANUC ROBODRILL AT14IA Year: October 1999 Serial Number: 99XTH612 Weight: 1,800 kg Power Supply: 3-phase, 200-220V, 9 KVA Laodsy Sghrepfx Ac Isb Origin: Made in Japan Capabilities & Equipment Tool magazine: 14 stations (ultra-fast tool changer). Machining travels: X axis: 500 mm, Y axis: 380 mm, Z axis: 300 mm. Spindle speed: Max 8,000 rpm. Rapid traverse (X, Y, Z): up to 48 m/min. Table: Max load capacity 200 kg. WITH ROTARY TABLE BT MACHINES BUY SELL

Condition: good (used), Year of construction: 2007, In good technical condition and fully operational. 4-axis machining center Year of manufacture: 2007 X-axis: 800 mm Y-axis: 520 mm Z-axis: 505 mm Spindle speed: 10,000 rpm Spindle taper: 7/24 taper No. 40 Spindle power: 15/18.5 kW (7.5/11) Rapid traverse X-axis: 48 m/min Rapid traverse Y-axis: 48 m/min Rapid traverse Z-axis: 30 m/min Number of magazine stations: 24 Max. tool length: 300 mm Lajdpfx Ajy R R N Roc Iob Max. tool diameter: 80 mm Max. tool weight: 8 kg Machine footprint: 3,300 mm x 3,175 mm Machine weight: 7,500 kg Max. machine height: 2,950 mm

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 560 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 510 mm, total height: 2,778 mm, table load: 500 kg, overall weight: 4,920 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Mazak VCN410 was manufactured in 2006. It features an X-axis travel of 560 mm, Y-axis travel of 410 mm, and Z-axis travel of 510 mm. The machine includes a table size of 900 x 410 mm and a maximum table load of 500 kg. If you are looking to get high-quality machining capabilities, consider the Mazak VCN410 vertical machining centre we have for sale. Contact us for further details. • Table dimensions: 900 x 410 mm • Spindle taper: No. 40 (CAT 40) • Rapid traverse (X/Y/Z): 36 m/min • Spindle motor: AC 18.5/15/11/7.5 kW Lajdpey R D N Refx Ac Ijb • Power supply: 3-phase, 200 V, 50 Hz • Rated capacity: 28.3/23.32 kVA • Compressed air: 5 bar / 200 l/min • Floor space: 2,000 x 2,600 mm • Standard equipment: flood cooling, tool life monitoring, worklight Additional equipment • Chip conveyor (hinge type) • Coolant tank • Chip bucket

Condition: ready for operation (used), Year of construction: 1997, operating hours: 40,000 h, functionality: fully functional, machine/vehicle number: 179-49, travel distance X-axis: 2,000 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 630 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Fanuc OMC, total height: 3,040 mm, total length: 3,920 mm, total width: 2,400 mm, table width: 550 mm, table length: 2,700 mm, overall weight: 7,200 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 10,500 rpm, coolant supply: 30 bar, number of slots in tool magazine: 40, tool length: 250 mm, tool diameter: 75 mm, input voltage: 400 V, FZ 22 long-bed, fully functional and still in daily operation. The machine is being replaced and can be inspected at any time during regular opening hours. Ljdpfx Asy R D Dujc Ioab

Condition: repair required (used), Year of construction: 1991, operating hours: 40,000 h, functionality: limited functionality, machine/vehicle number: 109-43, travel distance X-axis: 550 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 425 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, feed rate X-axis: 4,000 m/min, feed rate Y-axis: 4,000 m/min, feed rate Z-axis: 4,000 m/min, nominal power (apparent): 13 kVA, torque: 35 Nm, controller manufacturer: Fanuc OMB, controller model: 9030556, workpiece length (max.): 220 mm, workpiece diameter (max.): 65 mm, total height: 2,600 mm, total length: 2,800 mm, total width: 1,800 mm, table width: 370 mm, table height: 900 mm, table length: 950 mm, table load: 500 kg, overall weight: 2,500 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 6,000 rpm, distance table center to spindle nose: 615 mm, number of slots in tool magazine: 12, input voltage: 380 V, Equipment: chip conveyor, rotational speed infinitely variable, Chiron Fz 12 S, year of manufacture 1991. Additional indexing device. Currently with a measurement system error on the B-axis. The machine can be inspected at any time during regular opening hours. Lodpfxjy R Dqhe Ac Ieab

Condition: ready for operation (used), Year of construction: 2001, travel distance X-axis: 560 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 460 mm, spindle speed (max.): 10,000 rpm, spindle motor power: 7,500 W, number of slots in tool magazine: 20, number of axes: 3, This 3-axis Enshu EV450 was manufactured in 2001. It features an X-axis travel of 560 mm, Y-axis travel of 450 mm, and Z-axis travel of 460 mm. The machine is equipped with tooling for keyway machining and has a spindle speed of 10,000 rpm. If you are looking to get high-quality machining capabilities, consider the Enshu EV450 vertical machining center we have for sale. Contact us for further details. Laodpfxsy Rr Aro Ac Ijb • CNC control: Yasnac J100M • Special configuration: Equipped with tooling for keyway machining • Rapid traverse (X/Y/Z): 40,000 / 40,000 / 40,000 mm/min • Spindle motor power: AC 7.5 kW (10 min), AC 5.5 kW continuous • Pallet changer: Yes • Pallet size: 400 × 500 mm • Tool magazine capacity: 20 positions • Measuring system: Renishaw probe (2018) • Important maintenance: • Tool magazine gearbox serviced/repaired (2021) • Z-axis replaced (2019) • Y-axis replaced (2019) • Ballscrews overhauled (2019) • Telescopic covers replaced (2019) • Spindle line repaired (2019) • Spindle taper overhauled (2019) Additional equipment • RRRobotica Atom 20 S automation cell (2015), fully functional and certified • Pallet storage system available with the robot cell • Note: Robot/work cell is included in the machine sale price Technical Specification Taper Size BT 40

Condition: good (used), Year of construction: 2003, x-travel 500 mm y-travel 500 mm z-travel 420 mm Control Heidenhain / Millplus total power requirement 35 kW weight of the machine ca. 5,7 t Lasdpfxjy Raluo Ac Ieb