Alexander Rauch GmbH & Co.KG

Condition: used, Year of construction: 1977, centre height 200 mm centre distance 1.000 mm spindle turning speed range 1600 U/min spindle bore 42 mm turning length 1600 mm Kjdpeyv N Rkefx Ahvodi turning diameter over bed 410 mm 230 mm machine weight ab. 1.700 kg dimensions 2000 × 1000 × 1500 mm

Condition: used, turning diameter over bed 330 mm centre distance 650 mm spindle bore 36 mm Kdodpeyv N Nyefx Ahvoi weight of the machine ca. 600 kg

Condition: used, Year of construction: 2008, turning diameter over bed 280 mm Turning diameter over slide 170 mm Kdedeyv Nrhopfx Ahvji centre height 220 mm centre distance 1600 mm Spindle Speed 25-1320 UpM spindle bore 75 mm tailstock quill taper MT 4 weight of the machine ca. 2025 kg

Condition: excellent (used), Year of construction: 2009, spindle bore: 80 mm, turning diameter over bed slide: 620 mm, turning length: 1,625 mm, total length: 2,500 mm, total width: 1,200 mm, total height: 1,400 mm, bed width: 350 mm, rotational speed (max.): 1,500 rpm, overall weight: 1,900 kg, Heidenhain 2 Axis dro Multi fix tool holder system Kdsdpfsyv Adwex Ahvji Hardned guideways CE-Mark with limit switch Fully closed back side DBC Turning Length: 1625mm Swing over bed Ø: 620mm Swing over cross slide Ø:425mm Swing in the gap Ø: 880mm Gap length: 200mm Spindle bore: 80mm Spindle power: 5.5kW Bed width: 350mm Spindle taper: 5Mk Speeds / ranges: 1500Rpm Length: 2500mm Width: 1200mm Height: 1400mm Weight: 1900kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2000, control Siemens Sinumerik 805 turning length 1000-8000 mm Kdedpfx Aoyu U Aujhvei Turning diameter above the facing slide 570 - 365 mm --> Technical data Precision universal lathe with programmable cycles --> Siemens Sinumerik 805 control system --> Turning length 1000-8000 mm --> Swing diameter of bed cross slide 570-365 mm --> Cross slide travel 345 mm --> Turning tool cross section DIN 770h x b 32 x 25 mm

Condition: used, total length: 3,700 mm, total width: 1,200 mm, total height: 1,600 mm, Empty weight: 4.000 kg Price: On request - Documentation available: No - CE certificate present: No - Drive system: Conventional Kdedpfx Ahsyuxa Rovji - Power [kW]: 12.0 - Centre height [mm]: 420 - Swing over bed [mm]: 800 - Carriage turning diameter [mm]: 500 - Distance between centres [mm]: 2000 - Bed width [mm]: 480 - Spindle bore [mm]: 105 - Min. spindle speed [rpm]: 10 - Max. spindle speed [rpm]: 1000 - Options: Quick-change tool post, Fixed steady, Digital readout, Four-jaw chuck - Type of digital readout: Fagor 3-A - Transport dimensions: 3700mm x 1200mm x 1600mm (l x w x h) - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 1980, turning diameter 300 mm Kjdpfx Aoytg Uyohvsdi turning length 1700 mm swing diameter over bed slide 600 mm total power requirement 12,5 kW

Condition: new, Year of construction: 2026, turning diameter over cross slide: 280 mm, spindle bore: 105 mm, turning diameter: 840 mm, total length: 1,520 mm, total width: 4,500 mm, total height: 1,650 mm, rotational speed (max.): 1,600 rpm, rotational speed (min.): 36 rpm, type of input current: three-phase, overall weight: 4,050 kg, The Bernardo Goliath 800 x 3000 professional metal lathe is a powerful industrial tool engineered for precise machining of large-scale components in both single-unit and series production. Equipped with a 3-axis digital readout and rapid longitudinal and cross feeds, this machine significantly reduces downtime while ensuring maximum working accuracy. Its impressive distance between centres of 3000 mm and large spindle bore (105 mm) enable it to handle even the most demanding mechanical engineering tasks with ease. The robust, induction-hardened bed made of cast iron guarantees exceptional stability and minimised vibrations, even during heavy-duty operation. This is the ideal solution for workshops seeking reliability, versatility, and high-performance cutting in the heavy-duty class. Key Features: - Solid bed constructed from precision-ground and induction-hardened cast iron for outstanding accuracy - State-of-the-art main spindle assembly with high-quality angular contact ball bearings - Centrally positioned, user-friendly feed and threading control elements - Standard with rapid longitudinal and cross feed to reduce downtime - Large, additionally hardened and polished gears ensure quiet and smooth operation - Removable gap bridge allows machining of larger workpieces - Tailstock can be offset for taper turning, handwheel features adjustable scale (0.02 mm) - Electromechanical foot brake minimises downtime - High performance even in face turning operations - 3-axis digital display and MULTIFIX size D toolpost system included in delivery - Capable of cutting trapezoidal and module threads! Technical Specifications: Distance between centres: 3000 mm Centre height: 420 mm Swing over bed: 840 mm Swing with gap bridge removed: 1060 mm Swing over cross slide: 280 mm Bed width: 400 mm Spindle bore: 105 mm Spindle mount: DIN 55029, D1-8 Spindle speed range: 36–1600 rpm Number of spindle speeds: 16 Longitudinal feed range: 0.063 – 2.52 mm/rev Cross feed range: 0.027 – 1.07 mm/rev Metric threads: (18) 0.5 – 7 mm Inch threads: (26) 2–28 TPI Quill diameter: 75 mm Quill stroke: 150 mm Tailstock taper: MK 5 Motor power: 9.0 kW Voltage: 400 V Dimensions (W x D x H): 4500 x 1520 x 1650 mm Weight approx.: 4050 kg Scope of Delivery: - 3-jaw chuck PS3-315mm /D8 - 630 mm face plate - 260 mm fixed steady rest - 110 mm travelling steady rest - Reducing sleeve - Centres (1x fixed / 1x revolving) - Electromagnetic spindle brake - Foot-operated safety brake - Coolant system - LED work light - Change gears set - Service tools - 40-position tool post & toolholder set with 4 inserts (Multifix) - 3-axis digital display - Legally required safety guards - Complete DTR technical documentation in Polish - CE certificate - 24-month warranty for all customers at no extra cost Ksdpfx Ahoyr Naisvedi

Condition: new, neu Bulgarien 460 € 2276.69 € 890 mm 3000 mm 400 mm 155 mm 490 mm 700 mm 15 160 M 4 3,7 - 15,6; 14,7 - 62; 58 U/Min 160 0.032 - 38.9 mm/U 0.016 - 19.45 mm/U 0.5 - 480 mm 60 - 1/16 Gänge/" 525 mm 270 mm 125 mm 6 MK 260 mm 30 kW 7500 kg driven by variable speed control (4 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates Kdjdpfx Aoyq Sq Ushvsi tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.500 mm € 105 510,00 turning length2.000 mm € 109 230,00 turning length4.000 mm € 128 740,00 turning length5.000 mm € 139 980,00 turning length6.000 mm € 156 880,00

Condition: new, neu Bulgarien 91920 € 1737.29 € 860 mm 3000 mm 430 mm 135 mm 620 mm 560 mm 11 140 M 7 - 42; 28 - 170; 165 - 1 U/Min 150 0.039 - mm/U 0.02 - 9 mm/U 0.5 - 0 mm 60 - 1/6 Gänge/" 240 435 mm 150 mm 105 mm 6 MK 225 mm 15 kW 4650 kg driven by variable speed control (3 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm Kdodpfxeyq Sm Aj Ahvoi spindle dead center main motor with frequency invertor four way rapid traverse device foot pedal brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.500 mm € 77 680,00 turning length2.000 mm € 80 590,00 turning length4.000 mm € 98 080,00 turning length5.000 mm € 110 890,00 turning length6.000 mm € 124 730,00

Condition: excellent (used), L & Z Lathe NARDINI Type MS 175 E Center height: 175 mm Swing over bed: 350 mm Distance between centers: 800 mm Kodpfeyq Nvnex Ahvodi Spindle bore: 46 mm Spindle speeds: 25 - 2000 rpm Weight: 1250 kg

Condition: used, turning diameter over cross slide: 690 mm, spindle bore: 180 mm, turning diameter: 1,300 mm, turning diameter over bed slide: 1,040 mm, center height: 500 mm, quill diameter: 130 mm, quill travel distance: 2,000 mm, spindle speed (max.): 800 rpm, spindle speed (min.): 4 rpm, overall weight: 8,700 kg, tailstock quill stroke: 420 mm, Lathe in excellent condition, ready for use. Viewed. Kedpfsypbfxex Ahvedi

Condition: good (used), functionality: fully functional, turning diameter over cross slide: 520 mm, spindle bore: 71 mm, turning diameter: 800 mm, turning length: 3,000 mm, Lathe TOS SUI 80 for sale as per photos. The machine is in good condition and operates perfectly. Includes digital readout, steady rest, quick-change toolholder, and additional accessories. - MK6 tailstock - 520 mm swing over cross slide - 800 mm swing over bed - 3000 mm distance between centers - 71 mm spindle bore - Speed range: 11–1800 rpm Ksdpfx Ahoypa T Uevodi - Main drive: 15 kW - Including rapid traverse - Weight approx. 6500 kg Loading by forklift or crane. Please contact at any time if you have questions.

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, spindle bore: 95 mm, turning diameter: 930 mm, turning diameter over bed slide: 930 mm, turning diameter over top slide: 650 mm, turning length: 4,000 mm, total length: 6,500 mm, total width: 1,800 mm, total height: 1,800 mm, spindle speed (max.): 800 rpm, spindle speed (min.): 8 rpm, overall weight: 6,400 kg, The PORĘBA TPK-90A1/4M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Kdsdjykzvyepfx Ahvji Availability: on stock available, under power, inspection possible anytime Technical data: - distance between centers/turning length: 4000 mm - turning diameter over bed: 930 mm - turning diameter over support: 650 mm - turning diameter in bridge recess: 1200 mm - power on compound slide - spindle bore diameter: 95 mm - maximum workpiece weight between centers: 6,000 kg - maximum workpiece weight between centers + 1 steady: 7,500 kg - maximum workpiece weight between centers + 2 steadies: 9,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 8 - 800 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.1 – 12,8 transverse: 0.05 – 6,4 - engine power: 16/22 kW (1st gear / 2nd gear) - overall dimensions: total length: 6500 mm width: 1800 mm height: 1865 mm total weight: 6400 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover, (no steady rests) Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-700 mm, with rollers - MULTIFIX quick change tool post

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, spindle bore: 95 mm, turning diameter: 930 mm, turning diameter over bed slide: 930 mm, turning diameter over top slide: 650 mm, turning length: 8,000 mm, total length: 10,500 mm, total width: 1,800 mm, total height: 1,800 mm, spindle speed (max.): 800 rpm, spindle speed (min.): 8 rpm, overall weight: 9,200 kg, The PORĘBA TPK-90A1/8M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: on stock available, under power, inspection possible anytime Technical data: - distance between centers/turning length: 8000 mm - turning diameter over bed: 930 mm - turning diameter over support: 650 mm - turning diameter in bridge recess: 1200 mm - power on compound slide Kdedpfeyi U Rbjx Ahvsi - spindle bore diameter: 95 mm - maximum workpiece weight between centers: 6,000 kg - maximum workpiece weight between centers + 1 steady: 7,500 kg - maximum workpiece weight between centers + 2 steadies: 9,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 8 - 800 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.1 – 12,8 transverse: 0.05 – 6,4 - engine power: 16/22 kW (1st gear / 2nd gear) - installed inverter for slow-start - overall dimensions: total length: 10000 mm width: 1800 mm height: 1865 mm total weight: 9200 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover, (no steady rests) Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-700 mm, with rollers - MULTIFIX quick change tool post

Condition: good (used), turning diameter over cross slide: 530 mm, spindle bore: 90 mm, turning diameter over bed slide: 800 mm, center height: 400 mm, Poreba TPK 80 x 4000mm Heavy Duty Lathe Model: TPK 80/4m Swing over Bed: 800mm Swing over Cross Slide: 530mm Swing in GAP: 1080mm Kdjdpfx Ahjyimzajvsi Distance Between Centres: 4000mm Spindle Bore: 95mm dia. Spindle Speeds: 800 RPM Machine with: Fixed Steady

Condition: reconditioned (used), functionality: fully functional, turning diameter over cross slide: 1,000 mm, turning diameter: 1,350 mm, turning length: 3,000 mm, Status: during general overhaul. The PORĘBA TR series lathe is a universal machine tool intended for both roughing and finishing operations. It is particularly suitable for machining shafts as well as heavy, large-size workpieces. The offered machine is currently undergoing a general overhaul – the last photo presents its current stage of refurbishment. The remaining photographs show TR series lathes after general overhauls performed by our company and delivered to end users. They serve as a reference for the final quality standard and workmanship. Scope of the general overhaul: - Complete dismantling of the lathe - Regeneration and replacement of worn components - Calibration of trapezoidal lead screws and manufacturing of new bronze nuts - Replacement of bearings and sliding bushings, including new spindle bearings - Grinding of bed, carriage and top slide guideways, followed by scraping of mating surfaces (with application of anti-friction materials) - Regeneration of the tailstock quill - Regeneration of the tool post - Overhaul and modernization of lubrication and coolant systems - Electrical scope: manufacturing of a new electrical cabinet, complete new machine wiring, and replacement of all electrical components with new ones - Inspection of electric motors together with replacement of bearings - New painting - After completion of the overhaul: trial assembly, preliminary acceptance at our workshop, positioning on the foundation, levelling and final acceptance Kedeyh H Iyjpfx Ahvsdi - Adaptation of the lathe to minimum safety requirements in accordance with applicable EU Directives

Condition: used, Year of construction: 1972, spindle bore: 65 mm, center height: 175 mm, This offer concerns the Heylingensteadt Model 315 EV with digital display. The machine comes from tool manufacturing and has had only a few operating hours, thus it is in good condition. Kodpfsyhwyysx Ahvjdi Due to company closure, I am selling various lathes, milling machines with extensive accessories, as well as a welding machine. If interested, please get in touch.

Condition: excellent (used), Year of construction: 1972, turning diameter 175 mm turning length 750 mm swing diameter over bed slide 350 mm Kodpfsyfh Nijx Ahvodi total power requirement 4 kW weight of the machine ca. 1,2 t

Condition: good (used), NARDINI MS 125 E / Lead and Feed Screw Lathe - Center height over bed: 150 mm - Swing over cross slide: 140 mm - Distance between centers: 500 mm - Bar capacity: 34 mm - Spindle speeds: 50 - 2500 rpm - Automatic longitudinal/cross feeds - Thread cutting / metric / imperial, etc. - Tailstock: MT 3 - Quick-action collet chuck type 173E incl. 16 collets - Multifix toolpost with inserts - Change gears - Tool cabinet incl. various tools - Machine feet - Chip guard Kedpfjyam Slsx Ahvsdi - Drill chuck & live center - Work lamp - Documentation Dimensions: LxWxH: 1.6 x 0.7 x 1.6 meters / Weight: 1250 kg Errors and omissions excepted.

Condition: repair required (used), Year of construction: 1999, functionality: unexamined, turning diameter: 930 mm, center height: 465 mm, turning length: 2,000 mm, TRP 93 MN x 2000 with Heidenhain Manual Plus Year of manufacture: 1999, machine is in very good mechanical condition The 24 volt circuit needs to be checked Large steady rest 2 pieces 4-jaw face plates Weight approx. 8 tons Kodpfjyak Hgsx Ahvedi

Condition: used, functionality: fully functional, spindle bore: 102 mm, center height: 400 mm, turning length: 2,000 mm, 26 spindle speeds from 4.5 to 1400 rpm - powered top slide - rapid traverse - 400 mm Forkardt chuck Kjdjx U Dxyspfx Ahvodi

Condition: used, Year of construction: 1953, WEIPERT Lead and Feed Screw Lathe WEZ * Due to changes in our business division within the manufacturing sector and a production reorganization, we are offering for quick sale a WEIPERT WEZ lead and feed screw lathe. * The machine underwent a partial overhaul in 1982. * Year of manufacture: 1953 Serial number: 13867 Three-jaw chuck: Ø 400 mm Swing over bed: 800 mm Distance between centers: 2,500 mm Spindle bore: 90 mm Tailstock: Yes Machine weight: approx. 5,500 kg * A wide range of accessories is optionally available. * IMPORTANT: For logistical reasons, sales are limited to the European area only. The buyer is responsible for removal, loading, and transport. * "The seller excludes any warranty for the purchased goods. The goods are sold as is, without any guarantee of their fitness for a particular purpose or freedom from defects. The buyer confirms that they have inspected the goods before purchase and are satisfied with their condition. The seller accepts no liability for damages arising from the use of the goods. Any claims by the buyer against the seller are excluded." * Ksdpfxex R Tnve Ahvodi Status: 02.02.2026 * Price: €8,500 negotiable / plus VAT Prices quoted are net, VAT not included. * If you have any questions or require further information, please do not hesitate to contact me. *

Condition: excellent (used), Year of construction: 1983, Heavy-duty lathe POREBA TPK 80 / 10 m for sale. Year of manufacture: 1983. Turning length: 10 m! Machine in very good condition. Extensive accessories. Video available. Kdedex Il R Djpfx Ahvji

Condition: reconditioned (used), CAZENEUVE HB 575 x 1500 Lathe Kdjdex Ebwfepfx Ahvsi Distance between centers: 1,500 mm Center height: 250 mm Swing over bed: 575 mm Swing over cross slide: 525 mm Swing over carriage: 300 mm Spindle bore: 51 mm Tailstock taper: MT5 Max cross slide travel: 305 mm Number of spindle speeds: 18 Power: 10 Hp Spindle speed: from 32 to 1,600 rpm Electrical cabinet Dimensions (L x W x H): 2,905 x 1,175 x 1,345 mm Weight: 2,050 kg New Heidenhain DRO Multifix tool post – Fixed steady rest New 2-axis Heidenhain DRO