Beutlhauser GmbH & Co. KG

Condition: used, Year of construction: 2018, functionality: fully functional, Plasma cutting machine for pipes and profiles Plasma cutting machine for cutting pipes and profiles. The cutting contour is defined and create by the software. The created CNC code can send to the machine via USB or network. The program can be easily choose via the 12"touch display. The automatic cutting process is started after manual insertion of the workpiece. - Tube length: max. 6000mm - for round tube up to OD = 150mm max - for square tube up to 101.6x101.6mm (4 "x4") max - maximum pipe weight 150KG per load - 4-jaw chuck - 1x automatic raw support - fully automatic cutting process - PC control with 12 "touch display - Data import via USB and network - Power consumption: 400V 3P 2KW Dcodpfxsx Ebzqe Ab Tor - weight: 800KG Made in Germany The pictures show you an older bigger machine

Year of construction: 2021, condition: excellent (used), Zdaz CS 730 Dedpfxjx Ebmao Ab Tscr

Condition: ready for operation (used), Year of construction: 2000, Immediately available from site: Pipe bending machine Tracto Technik Type: Tubomat 642 Dcodpfox D T Imox Ab Tsr Year of manufacture: 2000 Pipe diameter: max. 42 mm, min. 6 mm Wall thickness: 3 mm Bending radius: min. 180 mm, max. 5 mm Drive power: 1.5 kW Weight: 1,000 kg Pipe bending machine with electronic control, 4-position bending angle preselection with digital display Hydraulic bending drive, operation via manual lever valve Travelling pressure die (sliding guide) Hydraulic mandrel retraction Tube circular saw with coolant lubrication and automatic feed Tube deburrer for inner and outer deburring Machine is mobile and flexibly usable Priced at EUR 7,000.— plus VAT, ex location

Year of construction: 2018, condition: ready for operation (used), This AMT AHDR 500/1600 was manufactured in 2018. It features a coil diameter of 1600 mm and a spreading range of 250–650 mm, powered by dual 0.75 kW reel drives. With a total weight of 1200 kg and a through height of 1200 mm, it's in excellent, like-new condition with zero operating hours. Contact us for more information about this machine. Application Types Other Machine Tools Djdpfx Ajx D Nb Aeb Tscr

Year of construction: 2023, condition: ready for operation (used), Additional Equipment Material: Stainless steel / Mains voltage connection: 230VAC / 50/60Hz/ 1Ph I - approximately 2.4 kVA I - approximately 10 A via separate fused supply line / Temperature range: +5 to +35°C, standard; optional 40°C / General protection class: IP 65 (except switch cabinet door due to cooling) X-ray Technology This WIPOTEC SC 30 was manufactured in 2023. It features a high-speed operation with a capacity of up to 240 pieces per minute and a scan width of 320 mm. The system includes stainless steel construction, intuitive touchscreen controls, and an industrial high-performance X-ray unit for precise foreign object detection. Ideal for efficient and accurate sorting operations. Contact us for more information about this machine. Application Types Other Machine Tools Dodpfx Abex D I T De Tscr

Year of construction: 2014, condition: ready for operation (used), This Bystronic TB LK 2.70 2.50 VL 1AS was manufactured in 2014. It includes an edge removal machine, washing machine, inspection and frame placement station, assembly, gas filling, and pressing machine, spacer applicator, and sealing machine. Consider the opportunity to buy this Bystronic TB LK 2.70 2.50 VL 1AS. Contact us for more information. Dodpfjx D Ixtox Ab Tocr Application Types Other Machine Tools

Year of construction: 2020, condition: ready for operation (used), Main Drive Spindle Speed 2900 RPM Spindle motor power 4 kW Dcodpfx Abex D Ih Us Tsr This CAMFIL Quantum Series 2 was manufactured in 2020. It features a robust steel construction, designed for continuous industrial use with a motor power of 4 kW and airflow of approximately 2,000 m³/h. Ideal for metalworking processes, it includes an energy-saving fan and a maintenance-friendly design with easily accessible filter elements. Consider the opportunity to buy this CAMFIL Quantum Series 2. Contact us for more information about this machine. Application Types Other Machine Tools

Year of construction: 2006, condition: ready for operation (used), This EUBAMA S6 rotary transfer was manufactured in 2006. It features a robust base frame, hydraulic fittings, a Stöber servo motor with planetary gearbox, and a milling unit with NC feed. Ideal for precision, it also includes a face turning head and a length control system with a pneumatic cylinder and laser. Contact us for more information about this machine. Application Types Dsdpex D If Tjfx Ab Tecr Other Machine Tools

Year of construction: 2010, condition: ready for operation (used), Movement X-Axis Movement 1500 mm Y-Axis Movement 1600 mm Z-Axis Movement 800 mm Dedpfx Abox D H T Ne Tscr This 3-axis Sodick Picka PF-32A was manufactured in 2010. It's an electron-beam processing machine designed for high-precision surface treatments. Features include a vacuum chamber, a max workpiece size of 300 × 200 × 100 mm, and a beam diameter of up to 60 mm. Ideal for applications requiring fine finishing. Contact us for more information. Application Types Other Machine Tools

Year of construction: 2010, condition: ready for operation (used), This MH 4ZHP was manufactured in 2010. It features a continuous furnace, cooling system, and a conveyor system with an accumulation section. Key specifications include a passage width of 650 mm, passage height of 1100 mm, and a total system length of 11.53 m. Ideal for operations requiring extensive heating and cooling processes. Contact us for more information about this machine. Application Types Other Machine Tools Dcedpfx Abjx D H H No Tjr

Year of construction: 2011, condition: ready for operation (used), Additional Equipment Tool magazine capacity: 12 placesMax. tool diameter: 125 mm Max. tool diameter: 125 mm Max. tool length: 270 mm / Max. tool weight: 7 kg This 5-axis ICON 6-250 was manufactured in 2011, featuring a robust design with a total weight of 52,200 kg and a power capacity of 120 kVA. It includes 6 stations with both horizontal and vertical processing capabilities, a tool magazine with a 12-place capacity, and a CNC plate table with precise positioning. Ideal for complex machining tasks, the machine offers a maximum spindle speed of 12,000 rpm and a torque of 29 Nm. Contact us for more information about this machine. Dsdex D Hmcopfx Ab Tjcr Application Types Other Machine Tools

Year of construction: 2014, condition: ready for operation (used), General Data Measurements width 2260 mm Measurements depth 8950 mm Measurements height 4050 mm Machine weight 3900 kg Dcsdpfx Aox D Dxiob Tor This FOREL VW2800AO was manufactured in 2014. It features a comprehensive setup for glass processing, including edge deletion, inspection, frame placement, assembly, gas filling, pressing, spacer application, and sealing capabilities. Dimensions are substantial with a length of 8950 mm and height of 4050 mm. It operates under continuous conditions, adhering to CEI EN 60204-1 standards, with a total installed power of 35 kW. Contact us for more information about this machine. Application Types Other Machine Tools

Year of construction: 2012, condition: ready for operation (used), General Data Machine weight 15000 kg Main Drive Spindle motor power 45 kW This INGRAMATIC RP72 L was manufactured in 2012. It features a double starter unit with TR7 dies, capable of threading diameters from M14 to M20. The machine operates at speeds up to 120 rpm, powered by a robust 45 kW motor. Weighing 15,000 kg, it is in very good condition and ready for immediate shipment. CE compliant and includes Brankamp control process. Contact us for more information about this machine. Dcedpsx D Dtgjfx Ab Ter Application Types Other Machine Tools

Year of construction: 2016, condition: ready for operation (used), General Data Measurements width 1750 mm Measurements depth 1370 mm Measurements height 2450 mm Machine weight 850 kg Additional Equipment Process container stainless steel Jog mode possible during workpiece change Additional storage space for workpieces and workpiece holders Holder for 10 workpiece holders Cooling compressor holder to mix the media for L2 ringholder DF tools for L2 / total length 424mm (20 pieces) Dcedpfx Aox D Hkujb Tsr This OTEC DF10 was manufactured in 2016. It features a stainless steel process container and jog mode for easy workpiece changes. Includes additional storage for workpieces and holders, accommodating up to 10 holders. Equipped with water cooling DF-7 and a cooling compressor, it's suitable for ambient temperatures between 10-40°C. Ideal for efficient media mixing and tool handling. Reach out for more information. Application Types Other Machine Tools

Year of construction: 2022, operating hours: 1,264 h, condition: ready for operation (used), Additional Equipment Magnifier MB4320-1 Abrasive hose MB1233-25 Replacement HEPA filter assembly CTR280-1 Replacement desiccant charge ST6104-4 100 Micron Wheat Starch 25 lbs Conductive nozzle yellow MB1520-46C Conductive nozzle green MB1520-30C This COMCO CTR201-2 was manufactured in 2022. It features 1,264 machine hours and comes with a variety of options including a magnifier MB4320-1, abrasive hose MB1233-25, and replacement HEPA filter assembly CTR280-1. Additional parts include conductive nozzles and a 100 Micron Wheat Starch supply. Contact us for more information. Dodpfx Abjx D Hfrs Tecr Application Types Other Machine Tools

Year of construction: 2007, condition: ready for operation (used), Control Unit Dedpjx D E Skjfx Ab Tjcr Brand SIEMENS Model SIEMENS 840D Additional Equipment Siemens Path Control SINUMERIK 840 D, featuring 5 axes, 1 spindle, electronic gear, and integrated safety functions Motorized Milling Heads for internal and external gears with a swivel range of degrees External Gears: Min. Diameter: 950 mm / Max. Diameter: 2800 mm Cutter Arbor Cone: HSK-B160 (Hollow Shank Taper According to DIN 69063) This 5-axis CNC milling machine manufactured in 2007 features a Siemens SINUMERIK 840 D controller with electronic gear and integrated safety functions. It can handle workpieces up to 2800 mm in diameter and offers motorized milling heads with a swivel range of / degrees. Ideal for both internal and external gears, consider the opportunity to buy this Gleason Pfauter P 2800 CNC milling machine. Contact us for more information about this machine. Application Types Other Machine Tools

Year of construction: 2019, condition: ready for operation (used), General Data Machine weight 5000 kg This HOFMANN CVK11-BH4 was manufactured in 2019. It is an balancing machine designed for precise and reliable operations. Ideal for applications requiring precise balancing of rotating components. Contact us for more information about this machine. Application Types Other Machine Tools Dsdpfx Abex D Et Uo Tjcr

Year of construction: 2018, condition: ready for operation (used), This JENOPTIK HOMMEL ETAMIC T8000 Wavemove was manufactured in 2018. A reliable machine tool, it offers precise measurement capabilities for various applications. Consider the opportunity to buy this JENOPTIK HOMMEL ETAMIC T8000 Wavemove machine tool. Contact us for more information. Application Types Measuring Dsdpfxox D Et Ij Ab Tscr

Year of construction: 2008, condition: ready for operation (used), General Data Machine weight 900 kg Main Drive Spindle motor power 85 kW Dedpsx D D E Nsfx Ab Tecr This Emmegi VEGAMATIC was manufactured in 2008. It is an automatic cutting centre for aluminium profiles, featuring a feeder travel of 7395 mm and feed speed up to 60 m/min. The blade rotation angle ranges from -45° to +45°, with a standard blade diameter of 500 mm. Ideal for precise large-scale cutting tasks. Contact us for more information about this machine. Application Types Other Machine Tools

Year of construction: 2006, condition: ready for operation (used), General Data Machine weight 2235 kg Main Drive Number of spindles 1 Spindle speed range 5500 rpm Dcjdpox D Dytofx Ab Ter This Rotox EPA 572 was manufactured in 2006. A robust machine with a saw blade diameter of 220 mm, it maintains a high n/min of 5500. Weighing 2235 kg, the Rotox EPA 572 machine we have for sale is ideal for specialized tasks. Contact us for further details. Application Types Other Machine Tools

Year of construction: 2024, condition: ready for operation (used), This EXPERT cut Expert ecocam 2 was manufactured in 2024. It features a high positioning speed of 90 m/min and can handle cutting heights up to 100 mm. The machine operates on a PC-based NC software and supports various tool options including electric oscillating knives and driven circular knives. Ideal for cutting leather, textiles, and foams. For more information about this machine, please reach out to us. Application Types Dcedpfx Absx D Nnpe Tor Other Machine Tools

Year of construction: 2023, condition: ready for operation (used), This Other FSW head was manufactured in 2023. Designed to integrate seamlessly with milling machines, it features friction welding technology. Ideal for enhancing your milling setup with advanced welding capabilities. Contact us for more information. Dcedpfx Aex D N Dqeb Ter Application Types Other Machine Tools

Year of construction: 1983, condition: ready for operation (used), This ZPS AN6-40 A was manufactured in 1983. It features a pick-off spindle, internal grooving slide, and marking device. The machine includes six spindles with a 40 mm spindle bore and operates on a cam-controlled system. Consider the opportunity to buy this ZPS AN6-40 A. Contact us for more information. Application Types Djdex D Rb Djpfx Ab Tocr Other Machine Tools

Year of construction: 2012, condition: ready for operation (used), Main Drive Number of axis 7 This DEPO HF milling machine was made in the year 2012 and has 7 axis. The Stable 7-axis machine is specially developed for the manufacture of tools, molds and matrices. Dsdpfx Ajx D E Sqeb Tjcr Application Types Other Machine Tools

Year of construction: 2004, condition: ready for operation (used), Main Drive Spindle speed range 34000 Spindle motor power 15 kW Number of axis 5 Movement X-Axis Movement 9500 mm X-Axis Rapid Traverse 70 m/min Y-Axis Movement 1000 mm Y-Axis Rapid Traverse 40 m/min Z-Axis Movement 630 mm Z-Axis Rapid Traverse 40 m/min Tools Type of tool holder HSK-63F Media Chip conveyor Yes Additional Equipment 2-zone pendulum operation Angle milling head for bottom-side machining (optional) Automatic length measurement Barcode scanner Label printer Cycle time monitoring Tool holders, collets, saw blades, tools included eluCad (office software package for production optimization) This 5-axis Elumatec SBZ 150 was manufactured in 2004. It features a CNC profile machining center with a maximum machining length of 9,220 mm and a spindle speed of 34,000 rpm. The machine includes a tool magazine with standard and special tools, and supports 6-sided machining with optional angle head. It's dismantled and ready for delivery. If you are looking to get high-quality milling capabilities consider the Elumatec SBZ 150 machine we have for sale. Contact us for more information. Application Types Dcedpfx Abox D S N Nj Tjr Other Machine Tools