DRU-FÉM Kft.

Year of construction: 2018, condition: ready for operation (used), Brazing line manufactured in 2018. This SCAME BRAZING LINE 50-20-350-GI-DR features a maximum temperature of 1150 °C and operates with an electric power source of 85 kW. The continuous longitudinal conveyor system efficiently moves parts along a passage chamber measuring 50 x 20 x 350 cm. If you are looking to get high-quality brazing capabilities, consider the SCAME BRAZING LINE 50-20-350-GI-DR machine we have for sale. Contact us for further details. Ppedpszqctxofx Amyjw • Power source: Electric • Connected thermal load: 85 kW • Supply voltage: 3 x 400 V @ 50 Hz • Maximum temperature: 1150 °C • Operating temperature: 1120 °C • Gas pressure: 30–50 mbar • Atmosphere used: Endothermic Gas (ENDO) • Production capacity: Variable (kg/h) • Passage dimensions (W x H x L): 50 × 20 × 350 cm • Drive & motion system: Continuous longitudinal conveyor system moving parts along the 350 cm passage chamber at controlled speed (no conventional CNC cartesian axes)

Year of construction: 2011, condition: ready for operation (used), A Trumpf CNC punching machine is offered. Max. punching force: 180kN, working range X/Y: 2500mm/1250mm, max. sheet thickness: 6.4mm, max. workpiece weight: 160kg, max. punching diameter: 76.2mm, axis speed: approx. 100m/s, max. punching stroke rate: approx. 1000 strokes/min, max. marking stroke rate: approx. 2500 strokes/min, tool magazine: 18, clamps: 2, max. part size X/Y: 500mm/500mm, operating hours: 22146h. Including tool cassettes, various punches and dies, a MultiTool, and Easy Type. Weight: approx. 9.8t, machine dimensions X/Y/Z: approx. 6500mm/6203mm/2252mm. Documentation available. An on-site inspection is possible. Pedpozpyygjfx Amyjpw

Year of construction: 2011, condition: ready for operation (used), A Trumpf laser cutting system with automatic Trumpf Liftmaster is offered. Laser power: 5000W, laser type: Trumpf TruFlow 5000 CO₂ laser, wavelength: 10.6µm, working area X/Y: 3000mm/1500mm, Z-axis travel: approx. 115mm, max. table load: approx. 900kg, max. simultaneous speed X/Y: approx. 300m/min, max. sheet thickness mild steel/stainless steel/aluminum: approx. 25mm/20mm/12mm, operating hours (as of 12.06.2025): approx. 74181h, max. sheet format LiftMaster: approx. 3000mm/1500mm, max. LiftMaster load capacity: approx. 917kg, max. LiftMaster sheet thickness range: 20mm-25mm. Including peripheral equipment and accessories. Machine dimensions X/Y/Z: approx. 11250mm/4600mm/2400mm, weight: approx. 12500kg. Documentation available. An on-site inspection is possible. Ppjdpfx Amezpyxijyow

Year of construction: 2016, condition: ready for operation (used), A Trumpf CNC laser cutting machine is offered for the precise cutting of mild steel, stainless steel and aluminum sheets. Working range X/Y: 4000mm/2000mm, Z-axis travel: 115mm, laser power: 5000W, max. sheet thickness mild steel/stainless steel/aluminum: 25mm/20mm/12mm. Including various peripheral equipment and accessories. Overall dimensions X/Y/Z: approx. 11500mm/5500mm/2300mm, weight: approx. 18t. Documentation available. An on-site inspection is possible. Pjdpfxjzpa Sis Amyspw

Condition: new, EMERSON Diana Blue Line Hydraulic Guillotine Shear – Brand New The Diana Blue Line hydraulic guillotine shear is a robust and versatile machine tool designed for high-precision sheet metal cutting across a wide range of sizes and thicknesses. Thanks to its quick blade clearance adjustment and heavy-duty construction, it delivers outstanding performance and reliable operation even in demanding production environments. It is the ideal solution for fabrication shops and industrial companies seeking productivity, precision, and ease of use. Technical Specifications Cutting capacity: from 4 mm to 10 mm, depending on the model. Cutting length: from 2,000 mm to 4,000 mm. Cutting angle: 1.5°. Ppedpfx Amoznlbmoysw Cutting cycles: up to 20 strokes/min, depending on material thickness and cutting length. Motor power: from 5.5 kW to 15 kW. Standard Equipment German-made hydraulic valve system for reliable, long-lasting performance. Siemens electrical system. Rear gauge with position display (up to 600 mm). Quick blade clearance adjustment. Integrated cutting line illumination. Safety protection devices for operator safety. Front support arms for sheet positioning. High-strength steel blades for clean and accurate cuts. Key Features Heavy-duty frame for maximum stability during operation. Simple and intuitive adjustments. High productivity thanks to fast cutting cycles. Premium-quality components ensuring long service life and reliability. Optional Equipment Pneumatic sheet support system. Extended rear gauge travel up to 1,000 mm. Single-axis automatic positioning system for greater cutting accuracy. Custom Configurations The Diana Blue Line is available in a variety of configurations to meet the specific production requirements of every customer. For a customized configuration, technical consultation, or a tailored quotation, please contact our team. We will be pleased to recommend the solution that best suits your production needs.

Condition: used, Sheet Metal Working Machine Set Available November 2026 • Hydraulic Press Brake – OMAG Brand: OMAG Bending length: 4,000 mm Ppodeznkl Rspfx Amysw Ideal for sheet metal bending • Hydraulic Guillotine Shear – OMAG Brand: OMAG Cutting length: 4,000 mm Ideal for cutting sheet metal

Condition: ready for operation (used), Year of construction: 1992, Immediately available due to business closure: Pedpfx Amoznh Ayeyjpw CNC press brake, Lotze Type 327 x 1500 KN Year of manufacture 1992 Cybelec DNC 70 control system Pressing force 150 tons Working length 3500 mm Controlled back gauge Reach 300 mm Stroke 300 mm Drive 15 kW Complete set of upper and lower tooling (prisms) Weight 12 tons Price: EUR 6,000.00 plus VAT, ex works.

Condition: ready for operation (used), A hydraulic AMADA NC guillotine shear is offered. Cutting length: approx. 3050mm, max. sheet thickness: approx. 6mm, min./max. cutting angle: approx. 0.4°/2.2°, backgauge travel: approx. 1000mm, backgauge traverse speed: 100mm/s, max. stroke: approx. 160mm, max. stroke rate: 45strokes/min, control: AMADA NC control. Including sheet handling system. Machine dimensions X/Y/Z: approx. 3800mm/2250mm/2100mm, weight: approx. 6500kg. Inspection by appointment possible. Ppjdpfx Amjzlt Suoyew

Condition: used, Used strip layout die set from LVD Upper blade: P10.12 W20 Lower die: T12 20 Ppedpfezk Hr Sox Amyew V12 opening (for approx. 1.5 mm) 6 x 508 mm = 3048 mm

Year of construction: 1988, condition: used, Transversal Sheet metal Stiffening machine ALMORE type DS RT 1500 Year of construction:1988 Capacity: 1550 x 1,5 mm Thickness: from 0,4 to 1,5 mm Speed: from 7 to 15 m/min. Foot control Length: unlimited Useful machine for making ventilation ducts Voltage: 380 V Dimensions (L x W x H): 2000 x 800 x 1500 mm Weight: approx 1500 kg Ppedpfozku Eajx Amyew

Year of construction: 2026, condition: new, functionality: fully functional, # Sheet Metal Beading Machine ETB 40 – Metal Technics Polska ## Professional Sheet Metal Beading Machine The ETB 40 Sheet Metal Beading Machine is a robust and efficient machine designed for producing beads, grooves, flanges, reinforcing ribs, and other forming operations in sheet metal. Thanks to its heavy-duty construction, high precision, and a wide range of interchangeable forming rolls, it is ideal for metal fabrication workshops, HVAC duct production, sheet metal processing, and general industrial manufacturing. The machine enables fast and accurate production of repeatable profiles, improving productivity while maintaining excellent quality. ## Key Features * Maximum sheet thickness: 4 mm * Powerful 2.2 kW electric motor * Heavy-duty steel construction * 300 mm throat depth * Precise material guidance * Suitable for a wide variety of beading and flanging operations * Quick and easy roll replacement Ppsdpozkubzjfx Amyew * Ideal for HVAC, tanks, enclosures, and steel fabrication * High manufacturing quality * Machine available from stock ## Technical Specifications * Model: ETB 40 * Maximum sheet thickness: 4 mm * Roller width: 165 mm * Throat depth: 300 mm * Roller speed: 15.3 rpm * Motor power: 2.2 kW * Dimensions (L × W × H): 1550 × 510 × 1180 mm * Weight: 341 kg ## Applications The ETB 40 is ideal for manufacturing: * HVAC ducts and fittings * Air-conditioning components * Cylinders and tanks * Machine enclosures * Decorative sheet metal components * Flanges, reinforcing beads and stiffening profiles * Components for the automotive and steel fabrication industries ## Heavy-Duty Construction The machine is built on a rigid welded steel frame, ensuring excellent stability, high precision, and long service life even under intensive industrial use. ## Easy Operation The ergonomic design and intuitive controls allow fast roll changes and quick machine setup for different forming operations. This makes the ETB 40 suitable for both small workshops and high-volume production. ## Transport & Technical Support We organize machine transportation throughout Europe as well as to countries outside the European Union. Every transport quotation is prepared individually based on the delivery destination. We provide professional technical advice, warranty and after-sales service, and ongoing technical support from our specialists. Customers are also welcome to collect the machine directly from our warehouse in Sokołów Podlaski, Poland. ## Why Choose Metal Technics Polska? For many years, Metal Technics Polska has been supplying high-quality metalworking machinery to customers across Europe. We provide complete support—from technical consultation and machine selection to transportation, commissioning, and long-term after-sales service. If you would like to receive a quotation or learn more about this machine, please contact our sales team. Visit the Metal Technics Polska website to explore our complete range of sheet metal working machines and discover our latest products and promotions.

Condition: good (used), functionality: fully functional, Used flatbed die set from Wila Upper die: BIU 051 5 x 515 mm 2 x 200 mm Lower die: OZU-381 4 x 515 mm Approx. 700 mm split piece V10 – for 1 to 1.5 mm Ppjdpfx Amezkt S Ejyow New price: €7,535

Year of construction: 2000, condition: ready for operation (used), Offered is a RAS guillotine shear. Cutting length: 4040mm, max. steel sheet thickness: 5mm, backgauge range: approx. 5mm-1000mm, cutting angle: approx. 1.0°, stroke rate: approx. 28-46strokes/min, control system: RAS System 2005, weight: approx. 9200kg. Inspection by appointment possible. Pjdpfxozka Igo Amyepw

Year of construction: 1978, condition: ready for operation (used), A Haeusler CNC large-format 4-roll plate bending machine is available. Number of rolls: 4, Roll width: 3050mm, Max. prebending plate width: 3000mm, Max. prebending plate thickness: 60mm, Max. rolling capacity at max. plate width and 3500mm bending diameter: 70mm, Roll diameter top/bottom/side: 620mm/600mm/500mm, Max. top roll load: 12000kN, Operating speed: 4m/min, Connected load: 132kW, Weight: approx. 85t. Including cone bending device. Documentation available. An on-site inspection is possible. Podozka H Aepfx Amyepw

Year of construction: 2000, condition: ready for operation (used), overall weight: 2,110 kg, sheet thickness (max.): 5 mm, working length: 2,040 mm, Plate rolling machine manufactured in 2000. This FASTI 136-20-4.5 features a capacity of 2040 x 4.5 mm at 400 N/mm² tensile strength and weighs 2110 kg. It is equipped with a Fasti-Matik 5 R control unit and operates at 400 V. If you are looking to get high-quality plate rolling capabilities, consider the FASTI 136-20-4.5 machine we have for sale. Contact us for further details. - Capacity: 2040 x 4.5 mm (at 400 N/mm² Tensile Strength)- Weight: 2110 kg- Control Unit Model: Fasti-Matik 5 R (FM 5 / FM 5 R)- Operating Voltage: 400 V (3/N/PE~)- Frequency: 50 Hz- Control Voltage: 230 V AC / 24 V DC / 24 V AC- Connected Load: 6.356 kW- Nominal Current: 15.7 A- Circuit Diagram No.: 10X0001 B- Included Equipment: Control unit operating manual, machine instruction handbook- Working Hours: estimated as very low- Saving programs to the 3.5-inch floppy drive does not work (no access). It may be possible to replace it, though or the values must be entered manually. Pedpfx Aezi S U Aomyjpw

Condition: ready for operation (used), A BPR ring bending machine is available. Shaft diameter: 40mm, max. roller diameter: 162mm, center distance: 300mm, shaft speed: 7.5rpm, max. flat steel bending capacity: 100mm/15mm, max. edgewise steel bending capacity: 60mm/10mm, max. bending diameter: 35mm, machine dimensions X/Y/Z: approx. 950mm/650mm/1400mm, weight: approx. 500kg. An on-site inspection is possible. Ppedpfxjzipfrs Amysw

Condition: used, functionality: fully functional, Year of construction: 2003, TRONCATRICE PER LEGHE, usata AUTOMATICA, IMET VELOX 350 AF-E.COMPLETAMENTE REVISIONATA Ppodpfx Amezh Ugfeyow

Year of construction: 1978, condition: ready for operation (used), A roll forming line by Instytut Obróbki Plastycznej (Poland) for plastic metal forming is available. Roll stations: 12, shaft diameter: 50mm, max. profile width: 300mm, max. profile thickness: 2mm, overall system dimensions X/Y: approx. 20m/4m. Including an automatic cut-off unit with an incremental length measuring system and a payoff reel. An on-site inspection is possible. Ppjdpfx Aszhw Swjmysw

Year of construction: 2000, condition: ready for operation (used), A hydraulic 4-roll plate rolling machine Promau (Prümau) is available. Working width: 3000mm, bending capacity: 13mm, pre-bending capacity: 10mm, rolls: 4. An on-site inspection is possible. Ppedezhw Tuepfx Amyjw

Year of construction: 2015, operating hours: 2,677 h, condition: ready for operation (used), controller manufacturer: SIEMENS, controller model: SIMATIC HMI, number of axes: 3, This 3-axis punch press for profiles PARS HMP SIRIUS PLUS -3000/3-L1 was manufactured in 2015. It features a maximum section dimension of 110 x 110 mm and can handle wall thicknesses up to 8 mm. The machine offers a punching speed of 1 hole/s and is capable of punching 2 sections simultaneously with its 2-row design. If you are looking to get high-quality punching capabilities, consider the PARS HMP SIRIUS PLUS -3000/3-L1 punch press for profiles we have for sale. Contact us for further details. • Punching speed: 1 hole/s (including shift to next position) • Max. section dimensions: 110 x 110 mm • Wall thickness: up to 8 mm • Shear cylinder force: 17 t / 30 t • Section length: 3 m • Number of punching axes: 1–6 (holes in X–Y–Z system) • Number of punching rows: 1–2 (2-row machine punches 2 sections simultaneously) • Main axis drive: linear motor or rotary servo motor Ppodpfxozhv Tts Amyow • Expanding adapter for internal section support (deformation-free punching) • Automatic mechanical centering of the section at the shear point • Micro-lubrication only at the shear point

Year of construction: 2021, condition: ready for operation (used), overall weight: 9,300 kg, total width: 2,200 mm, total height: 2,130 mm, cutting length (max.): 3,080 mm, product length (max.): 3,920 mm, Hydraulic shearing machine manufactured in 2021. This KNUTH KHT H 3010 NC features a working length of 3080 mm and a throat depth of 150 mm. It includes a Cybelec Touch 8 control for optimal positioning of cutting gap, angle, and length. The robust backgauge and standard blades are suitable for stainless steel. If you are looking to get high-quality shearing capabilities, consider the KNUTH KHT H 3010 NC machine we have for sale. Contact us for further details. • Control: Cybelec Touch 8 (touchscreen) • Features: • Guided cutter bar with adjustable cutting angle for minimal twisting • Automatic optimization of cutting gap, cutting angle, and cutting length • Controlled backgauge with preloaded ball screw • Controlled kerf (cutting gap) adjustment • Controlled cutting angle adjustment • Blades/knife suitable for stainless steel • Robust, precise backgauge • Working area: • Working length: 3080 mm (maximum cutting length 3080 mm) • Throat depth: 150 mm • Cutting angle: 0.3°–2° • Strokes per minute: 17 H/min • Hold-down: 16 positions, 20 t capacity Psdpfx Aezgfhwemyjpw • Table size: 3340 mm x 520 mm x 875 mm • Backgauge: • Rear stop: 1000 mm • X-axis feed speed: 6000 mm/min • Front support arms: • Quantity: 3 • Length: 900 mm each • Cutting capacities: • 10 mm at 450 N/mm² • 6 mm at 700 N/mm² • Drive: • Main motor: 22 kW • Hydraulic tank: 350 l

Year of construction: 2000, condition: ready for operation (used), overall weight: 1,400 kg, total width: 1,600 mm, total height: 1,650 mm, laser power: 8,000 W, product length (max.): 1,300 mm, number of axes: 3, This 3-axis WAFIOS Fmu1 CNC wire coiling and bending machine was manufactured in 2000. It features an integrated CNC control panel with a full physical QWERTY keyboard and a secondary overhead display monitor. The machine includes a circular multi-tooling slide configuration and an integrated wire straightener feed mechanism. If you are looking to get high-quality bending capabilities, consider the WAFIOS Fmu1 machine we have for sale. Contact us for further details. - Phase/Connection: 3 ~- Voltage: 400 V- Frequency: 50 Hz- Control Voltage: 24 V DC / 230 V AC- Fuse Protection (Amps): 35 A (Main) / 25 A- Control Interface: Integrated CNC control panel with full physical QWERTY keyboard, function keys, and secondary overhead display monitor.- Included/Attached Components: Circular multi-tooling slide configuration, integrated wire straightener feed mechanism, workpiece transfer/manipulator station, protective hood enclosure (blue), inspection magnifying lamp, status tower light (Red/Green)- Application: Production of springs and bent parts- Operation: Automatic CNC programmable command (7 to 12 axes)- Wire Diameter Range: 0.4 - 1.6 mm- Wire Feed Length: Freely programmable, unlimited- Feed Speed: Max. 100 m/min- Rotation Length: Max. 68 mm- Coiling-Bending Unit Stroke: Max. 80 mm- Programming Precision (Feed C-axis): 0.001 mm- Programming Precision (Wire Rotation A-axis): 0.005°- Programming Precision (Coiling Head Y-axis rotation): 0.01°- Programming Precision (Coiling Head Z-axis longitudinal): 0.001 mm- Programming Precision (CNC Slides): 0.005 mm- Programming Precision (Raised CNC Spinner): 0.05°- Working Height: 1200 mm (wire center)- Production Rate: Max. 150 pcs/min- Installed Power: 8 kW- Air Consumption: Approx. 1 - 8 l/min at approx. 6 bar (depending on accessories)- Noise Level: Approx. 70 dB/A- Nominal Operating Voltage Tolerance: -10% / +6%- Operating Ambient Temperature: +10°C to +50°C- Transport and Storage Temperature: -10°C to +50°C- Operating Humidity: Max. 70% relative humidity at 25°C (Spraying not allowed)- Storage/Transport Humidity: Max. 90% relative humidity- Height with Open Hood: 2500 mm Psdpozf Ipzsfx Amyepw

Year of construction: 1998, condition: good (used), functionality: fully functional, Edge milling machine, manufactured by IMAC year of construction 1998 . Model : CB 18 . Series : B20 . Pjdpfx Aezfwh Temyepw

Year of construction: 1996, condition: ready for operation (used), A CNC punching and laser machine from Trumpf requiring repair, including laser source and high-frequency generator, is available. Cutting force: 220kN, laser power: 1500W, clamping power: 11kW, weight: approx. 18000kg. Error message: NCK deleted and buffer battery empty. An on-site inspection is possible. Pjdpfxjzfaals Amyjpw

Condition: excellent (used), Year of construction: 2013, operating hours: 55,200 h, functionality: fully functional, machine/vehicle number: A0035A0294, Machine type: TruPunch 3000-1300 (S11) TruPunch 3000-1300 (S11), medium format 1250/2500 We are the first and only owner of the machine. Machine with complete history and service documentation. Machine is in fully working order and in continuous operation. Technical data: Width 6500 mm Depth 6203 mm Height 2252 mm Max. punching sequence (E = 1 mm) 1000 1/min Max. punching sequence – marking 2500 1/min Punching mode, X-axis 2500 mm Punching mode, Y-axis 1250 mm Max. sheet thickness 6.4 mm Max. workpiece weight 160 kg Max. punching force 180 kN Multitool tool change time 0.3 sec Ppsdpfxezd U D Nj Amyjw Number of tools/sheet clamps | 18 pcs / 2 pcs Max. part size, part flap when punching 500 mm x 500 mm Max. part size, rigid slide for punching (with sliding table) 80 mm x 50 mm Average power consumption with active automatic shutdown 0.3 kW Average power consumption during production 5.6 kW Additional, non-standard machine equipment: 1) Thread forming function with thread counter and thread forming tool damage control: chip-free thread forming is possible in both structural steel and stainless steel and aluminum. The threading tool is mounted like all other tools in the head. Thread size to be machined ranges from M 2.5 to M10. A thread sensor enables control of the threading tool damage. User-friendly operation, including lubricant level control. 2) Marking/surface embossing function: fast marking using appropriate tools. High-quality knurling can be performed at high speed. 3) Lowerable die: the lowerable die enables scratch-free processing because it moves downward when positioning the sheet metal. 4) Additional clamping device: recommended for processing very thin sheets and when using roller tool machining technology. An additional 2 clamping devices can be installed. In combination with the SheetMaster Compact, a third clamping device is recommended. 5) 3 x Option - vertically movable clamping device: the clamping devices move vertically (maximum stroke 12 mm); enables direct processing of the sheet metal at the clamping devices. This option reduces scratches from high forming dies. 6) Sensor in the slide for small parts: control of the slide for small parts (included in the "Nibbling-free machining" option). 7) Second locating pin: the pin is located on the outside on the right side. 8) RTC tool cassettes: 17 tool cassettes with die plates, enabling quick machine retooling. 9) Brush table with unloading and loading assistance: a brush table is recommended for processing particularly delicate materials. Vertically moving balls embedded in the table facilitate the loading and unloading process. We invite you to contact us.