SAplastic

Condition: good (used), Year of construction: 2004, Twin-screw extruder, Krauss Maffei KMD63 model, for sale. The extruder is fully functional. The screws have been removed and can be inspected on site. Dcodpfszr N Urox Aqlsk - Year of manufacture: 2004 - C4 control system - The price applies to the extruder only, excluding any follow-up services. Loading, export documents, delivery, etc. can be arranged upon request. Please feel free to contact us if you have any questions.

Condition: good (used), Year of construction: 2004, functionality: fully functional, Krauss Maffei, type KMD90, for sale. Dedpfezr N T Ujx Aqljck The extruder is fully functional and can be inspected on site. - C5 control system - Year of manufacture: 2004 Loading, delivery, export documents, and more are available upon request. Please feel free to contact us with any questions.

Condition: ready for operation (used), functionality: fully functional, screw diameter: 200 mm, No minimum price – guaranteed sale at the highest bid! Granulation of temperature- and shear-sensitive plastics Suitable for soft PVC Suitable for hard PVC Suitable for HFFR formulations Suitable for elastomer compounds for low, medium, and high-voltage cables Dodpfx Aszr H Ebsqleck TECHNICAL DETAILS Screw diameter: 200 mm MACHINE DETAILS Drive power: 72.5 kW EQUIPMENT Eccentric granulation EGR Degassing zone Can be used as a single-screw extruder for various processing purposes

Year of construction: 2024, operating hours: 10 h, condition: ready for operation (used), functionality: fully functional, screw conveyor diameter: 145 mm, TECHNICAL DETAILS Extruder type: Single-screw extruder / melt extruder Screw diameter: 145 mm Heating: Induction heating MACHINE DETAILS Drive power: 45 kW Dsdpfx Ajzr Hz Aeqljck Suitable plastics: LDPE, HDPE, PP Suitable materials: Ground material, EPS, film scraps, ground film, and light plastic waste Material feed: Suitable for materials with low bulk density Operating hours: 10 h EQUIPMENT Stuffing device Hopper for material feed Large filter / screen changer Adapted die

Condition: used, functionality: unexamined, Pair of screws for extruder Weber DS-63, parallel Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 63 Serial no.: 063.008271.r.1004 Dcsdpfx Aqjzrt Enelsk Screw diameter: 2 x 63 mm Screw length: 17 x D Condition: used

Year of construction: 2011, condition: not inspected (used), functionality: unexamined, This extrusion system, featuring a LEISTRITZ ZSE 40 MAXX (28D) twin-screw extruder and a ventilation system, will be auctioned online on our RESTLOS auction platform as part of our industrial auction: "Liquidation of a well-known toy manufacturer - industrial equipment - packaging system - sorting system." Machine details: Complete extrusion system with two Leistritz extruders, including a ventilation system and a mezzanine. The system is suitable for a wide range of applications in the plastics, compounding, and processing industries and provides a solid foundation for industrial production operations. Scope of supply: • 2 x Leistritz extruders • Ventilation and extraction system • Associated system components and peripherals Technical data of the extruder: Type ZSE40MAXX-28D Year of manufacture 2011 Drive 125 kW Speed 1,000 rpm Manufacturer's description: The system includes two high-quality Leistritz extruders known for their reliability, performance, and precise processing. The system is complemented by a ventilation/extraction system that ensures optimal air circulation and a clean production environment. The system is sold as a complete package and is suitable for both expanding existing production capacities and setting up a new extrusion line. Additional documentation is available for the system and can be requested if interested. Dsdpfx Ajzpxn Noqlsck NOTE: There are also 4 silos available as optional extras for the system. A sealed bid can optionally be submitted for these in writing. Functionality not tested, but the system was in use until recently. ATTENTION: Mobile small peripherals are not included in this lot. Please contact us if you have any uncertainties about the scope of supply before placing a bid. The injection molding molds shown at the edge of the picture are also not included in this lot. We strongly recommend inspecting the lot! Subject to reservation This lot will be auctioned subject to reservation. After the auction closes, the seller will notify within 2 weeks whether the highest bid is accepted or not. We will inform you promptly.

Condition: good (used), Extrusion tool accessories, extruder -Manufacturer: JC Times, Extrusion Tooling Accessories -Type: unfortunately without type designations -Perforated plates: 3 pieces 1940/210/H60 mm -Individual components: see photos -Price/Fee: complete -Transport dimensions: 3150/1095/H1790 mm / 2050/300/H900 mm Dcodpfxezpwcxj Aqlek -Weight: 2510 kg / 560 kg

Condition: used, Cincinnati Proton 60LD30 single-screw extruders, in good working condition, ready for operation. Dedpozpd Uuefx Aqljck

Year of construction: 1999, operating hours: 47,973 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 20472666, Complete compounding and granulation system based on a co-rotating twin-screw extruder, Krupp Werner & Pfleiderer ZSK 50, manufactured in 1999. The system is suitable for compounding, processing, and regranulating thermoplastic materials. Dsdpfx Aqezn Um Eeleck Previous process: ABS recycling The system consists of: Twin-screw extruder ZSK 50 Mc 900 with a process length of 36 L/D Drive power: 181 kW Screw speed: up to 1200 rpm including water ring vacuum pump and water cooling including Autotherm temperature control unit including strand die head Multi-component dosing and material feeding system from Colortronic - Graviblend (manufactured in 1999), gravimetric, with 5 gravimetric feeders, including vacuum material conveying with Busch vacuum pump, type RC 0160, suction via suction lances Downstream: Ettlinger melt filter, type ERF 200 with 1250 cm² filter area for up to 900 kg/h Water bath, 4.0 m, including heat exchanger Granulate air blower Scheer strand granulator SGS 200-E5, manufactured in 2011 Classification vibration screen Cooling screw conveyor Control cabinets included. The system is currently still assembled and can be inspected under power until the end of September.

Condition: used, Used Baker Perkins model MP24PH 40:1 L/D twin screw extruder. - Manufacturer: Baker Perkins - Model: MP24PH 40:1 L/D - Number of screw: Twin Screw Extruder - Rotations: co-rotating - Screw speed range: 0 - 600 rpm - Motor power: 11.2.5 kW, variable speed Barrel: - Maximum operationg temperature: 200°C - Nominal barrel lenght: 40:1 L/D Dcjdpfx Aqozn Nn Dsljk - Barrel type: one piece horizontally split clamshell barrel - Heating: electrically heated via cartrige type heaters - Cooling: water-cooled via cored barrel backing block Includes: - Touch HMI integrated in switchboard - Single screw powder feeder - Liquid feed system - liquid hopper, gear pump and flow meter

Year of construction: 2022, condition: excellent (used), functionality: fully functional, We offer this very good PMH (Plasticmaschinen handelsgesellschaft) PMH DS25-32LD twin-screw extruder, year of manufacture 2022. Manufacturer: PMH Plasticmaschinen handelsgesellschaft Model: PMH DS25-32LD twin-screw extruder Year of manufacture: 2022 Condition: very good Category ID: 452 Type: PMH twin screw extruder PMH Compounder DS25-32LD, with co-rotating, segmented twin screws ("good as new") The machine is designed with an 11 kW three-phase drive and a distribution gearbox for 95 Nm at 400 rpm. The mounted safety coupling is combined with a cut-off contact in case of overload. The maximum permissible melt pressure is 150 bar and is monitored by a pressure sensor. Individual housings allow you to configure the machine flexibly according to your requirements. The segmented screws with a diameter of 25 mm are designed in the standard version with several kneading zones and a decompression zone (atmospheric degassing). A blind cover for the decompression zone is included in the scope of delivery. Ceramic heaters with thermal sensors and cooling fans control the temperature. A stainless steel funnel is mounted on the filling opening. Djdpfxoznkx Dj Aqleck The electrical control system is integrated into the machine frame. All heating zones are switched contactlessly via solid-state relays. A swivelling touch panel is available for user-friendly operation. The head plate is equipped with a mass pressure sensor. The mass pressure monitoring system switches off the drive when the set maximum mass pressure is exceeded. tool adapter with 4-hole nozzle plate Options: Vacuum pump for the degassing zone (only atmospheric degassing offered) 3 metre water bath Air-Knife Used strand granulator If you have any questions or need more information, feel free to send us a message or give us a call.

Year of construction: 2000, operating hours: 811 h, condition: used, functionality: fully functional, machine/vehicle number: 292, IDE--o/c 182836 - DC-drive 8,5 kW / screw Speed max. 50 rpm - 1-part cylinder, smooth Dcedpfjzmnp Rex Aqlsk - 1x flange heating zone - 2x die heating zones - die connection IDE M70x2

Year of construction: 1997, condition: used, PILOT EXTRUSION SPINNING LINE POLYESTER MAIN PART WAS DESIGNED BY FOURNE IN 1997 FOR DSM TO MAKE TRIALS OF POLYESTER AND POLYAMIDES, MONO & MULTIFILAMENT. >> EXTRUDER DETAILS : MANUFACTURER : FEP POLYMER YOC : 1997 TYPE : EX 25 - 25 D MAX. THROUGHPUT : CA. 7,0 KG/H (PA6), CA. 5,6 KG/H ( PP ) : CA. 8,2 KG/H ( PET ) NOMINAL SCREW DIA : 25 MM SCREW LENGTH : 25 X D Dodpfx Aqezl Hz Nsleck SCREW GEOMETRY : SPECIAL 3-ZONE-SCREW MIXING TORPEDO : CHANGEABLE ATTACHED TO SCREW END , CA 3 X D LONG HEATING CAPACITY : CA. 3,2 KW / 4 ZONES DRIVE : CA. 4,5 KW, AS- MOTOR MIT SCHNECKENGETRIEBE ELECTRICALLY HEATED AND REGULATED TO MAX. 350 ° CELSIUS, EQUIPPED WITH 3 TEMPERATURE CONTROL SENSORS, OVER-TEMPERATURE MONITORING, WATER-COOLED FEED ZONE, REMOVABLE ISOLATION AND BASIC FRAME, INCLUDING INERT GAS IN THE INLET PIPE, EQUIPPED FOR THE SUBSEQUENT RECEPTION OF A TORQUE CLUTCH ON THE GEARBOX END >>> SPINBEAM & MELT PIPE : ELECTRICALLY HEATED SPINBEAM DESIGN : FOR 1 MONFIL OR 2 MULTIFILAMENT THREADLINES SPINPUMPS : 1 = 2 X 2.4CC , 1 = 1 X 2.4 CC , 1 = 1 X 0.6 CC SPINNERETTES : 42 / 59 / 72 >>> QUENCH CABINET : FEP Polymertechnik Gmbh YOC : 1995 TYPE : CROSSFLOW Plant Nr. : 7.1396 >>> WINDER : BARMAG TYPE : SW4S Auftragsnr : 10/0428 YOC : 1988 >>> DRAW – STAND : EDMUND ERDMANN GMBH TYPE : DRAWMOD 02/380-3/5/6 LM YOC : 1995 COM. NR : 13/2492 CONTROLS COMPUTER : EDMUND ERDMANN YOC : 1995 FABR. NR : 132492 >>> PREHEATING OVEN : HERAEAUS Gmbh Type : WU6100 , 500C , 3 Nipe, 400 V 11.4 A, 5.4 kW YOC : 1997 FABR. NR : 97/11055 >>> HOIST IN EXTRUDER AREA : HEBEZEUGFABRIK GMBH, YOC : 1998, CAPACITY : 0,7 TONS LIFTING HEIGHT : 0,8 M

Condition: refurbished (used), functionality: fully functional, screw diameter: 172 mm, rotational speed (max.): 49 rpm, In recent years, over €420,000 have been invested in new components and factory refurbishments! Further technical details can be found in the attached documentation. TECHNICAL DETAILS Screw diameter: 172 mm Screw speed: 4.9 - 49 rpm Max. torque: 17,500 Nm MACHINE DETAILS Main motor: 216 kW Gearbox manufacturer: P.I.V Coperion DSE 180 TECHNICAL DETAILS Power: 7.5 kW Output torque: 280 Nm Degassing chamber: 1 Screw housing bore: Ø 181.5 mm Screw diameter: 180 mm Pressure build-up (axial pressure on the screw shaft): max. 25 bar EQUIPMENT Double screw degassing unit Coperion DSE 180, year 2021 Main gearbox P.I.V, year 2002, factory refurbished in 2021, unused Main gearbox P.I.V, year 1986, factory refurbished in 2016, in operation 2021 - 2023 Main motors Siemens, 212 kW, year 2002, factory refurbished in 2020, unused Main motors Siemens, 212 kW, year 1986, factory refurbished in 2015, in operation 2020 - 2023 Screw housings, 16 various, new and used Screw shafts, 2 x approx. 4,600 mm Supports Screw tips Thrust discs Dcodpfozl A N Nsx Aqlok Note: The electrical and control technology as well as the screw segments are not included in the scope of delivery.

Year of construction: 1996, condition: ready for operation (used), A Sandern vacuum calibration and cooling tank is offered. Max. pipe diameter: 125mm, tank length: 6000mm, number of chambers: 2. Dimensions X/Y/Z: 6500mm/1000mm/1500mm, weight: 1500kg. Inspection by appointment possible. Dodpfx Aqszli U Soljck

Condition: excellent (used), functionality: fully functional, Year of construction: 1976, Type :TECOM MONOBLOC E 50-1050 Year of production : 1976   Material: LDPE, HDPE winder 1050 mm winder : Double Diametar of head : 150 Djdpfx Aqezktuyeljck Diametar of screw: 50 corona  i In-line štampa Rotation die Machine is in very good condition and can be seen in production!

Year of construction: 1989, condition: good (used), Werner ZSK 58/32 D twin-screw extruder Year: 1989 110 kW motor Dsdpfx Ajzktrrsqljck

Year of construction: 2012, condition: used, This Macchi 3-layer blown film co-extrusion line is designed for the production of high-quality polyethylene films with outputs of up to 800 kg/h. The line processes LDPE, LLDPE, MLDPE, and HDPE and is suitable for manufacturing collation shrink film, gusseted shrouds, stretch hood film, tubing, and sheeting. Materials to be processed: Dedpfx Ajzkru Ejqleck LLDPE/LDPE/LLD/HDPE Extruders: 65 mm + 80 mm + 65 mm Infrared heaters 3 pcs plate filters Head: 3-layer blown film die head TE5303-IBC-350/500 Die diameter: 350 and 400 mm IBC Die gap: 1.8 mm Output: Up to 800 kg/hour, depending on the material formulation Air ring: Dual-flow air ring, carbon fiber Take-off: Take-off unit, 2400 mm wide Oscillating nip rollers Motorized side gusseting Rewinder: Double winder, fully automatic back-to-back rewinder Winder, fully automatic roll change Reel diameter up to 800 mm Winding width 2350 mm Accessories: Tower Web guide, E&L Gravimetric weight control system, Piovan/Doteco Component blender, Shini Dosing units, Doteco Automatic thickness control, Kundig K-Design profile gauge control system Calibrating basket Corona treater, Martignoni Air shafts, 8 pcs

Year of construction: 1988, condition: used, functionality: fully functional, Year: 1988 Material: LDPE/HDPE Winder width: 1100 mm, double winder Die diameter: 150, 100, 80, 50 Dodszi Urwopfx Aqlock Screw diameter: 60 Additional equipment: corona treatment + gravimetric system Maximum machine capacity: 90 kg The machine is in very good condition and can be seen in operation!

Condition: used, in perfect condition, with a brand new housing (replaced just last year). Dcsdpfx Aoziz Swjqlek

Condition: used, Dr. Wiesner Type: INTEGRA DDV -1...1 bar Item Description: Dr. Wiesner Integra leak testing system The classic – for all common testing methods The leak testing system for industrial leak and flow tests with a fully graphic color display up to three independent test circuits can be operated 255 test programs can be stored automatic process optimization autoTune (option) Communication via flexibly interchangeable bus coupling modules freely programmable fixture control freely programmable special test sequences The device is suitable for tests using the relative and differential pressure methods with overpressure. Special versions: none Technical data: Electrical supply: 110 ... 230V~; 50 ... 60Hz (connection via power cable to plug XO) Pneumatic: clean and dry compressed air max. 7 bar (to connection P) Pressure range: 0 ... 1000 mbar, electronically controlled Measuring ranges Relative pressure: 0 ... 1000 mbar Dsdpfx Aqsziiv Doljck Differential pressure: +20 mbar Resolution: 0.1 Pa Internal volume: 13 cm³ test circuit 15.0 cm³ reference circuit Electrical interfaces: 3x serial RS232 (COM1; COM2; COM3) 1x digital I/O (X1) Pneumatic: Connection for test object (Test) Connection for reference circuit (Ref.) Housing Degree of protection: IP40 Dimensions: 450x185x380mm (WxHxD) Weight approx. 15.5kg Condition: used (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Year of construction: 2005, condition: ready for operation (used), Screw diameter: 114mm, max. PVC throughput: 600 kg/h, max. screw speed: 20/min, number of heating zones for molds: 12, motor power: 76 kW, rated voltage: 3x 415V AC, rated current: 353A, rated power: 218kW, weight: 7.1t, operating hours: approx. 90,000h. Screws: Geometry designed for PVC profiles, water-cooled, cylinders: nitrided, air-cooled, equipped with a new PLC control system, vacuum pump, and power inverter for the main motor. An on-site inspection is possible. Dcedpfezh Nibex Aqljk

Year of construction: 2003, operating hours: 65,470 h, condition: refurbished (used), functionality: fully functional, machine/vehicle number: Titan 68R-APC/ 2 68F-60-40-1100-UT, Titan 68R-APC/2 68F-60-40-1100-UT with tungsten carbide cylinder and screw (designed for WPC-HDPE base) Very good feeding behavior and good processing. Screw modification for optimal use, including in the recycling sector. The system has been completely overhauled and is ready for use. Feeder optionally available. Dodpfx Aqszh Ednjlsck SIHI vacuum pump. For throughputs up to 400 kg/h. For highly filled compounds, approximately 180 kg/h. 4-zone heating.

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: 053 389 601, Offered for sale is an extrusion tool for PVC, used in the manufacture of PVC pipes. Pipe diameter range, min.: Ø63 mm Pipe diameter range, max.: Ø160 mm Output: approx. 750 kg/h Design: Dodezhuqkepfx Aqljck Mandrel carrier system designed for PVC melts, completely made of 1.2316 Flow contour polished Equipped with cylinder heaters and thermocouple M14x1.5, type “J” Includes 3 m connection cable, without plug connector for the extruder Technical data: 230V, 50Hz for max. 3600W per zone, 16A Number of heating zones: 6 Two copies of the operating manual, in German or English, are included in the scope of supply.

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: 066 404 601, An extrusion tool for the production of PE or PP pipes is offered. Pipe diameter range (min.): Ø90 mm Pipe diameter range (max.): Ø250 mm Output: approx. 1100 kg/h Design: Spiral distributor system, completely made of 42CrMo4 Flow contour polished Equipped with cylinder heaters and M14x1.5 type “J” thermocouples Incl. 3 m connection cable, without plug connector for the extruder Technical data: Dcjdpfezhnd Rex Aqlsk 230V, 50Hz for max. 3600W per zone, 16A Number of heating zones: 7 2 copies of the operating manual in German or English are included in the scope of delivery. The offer includes the following items: - Basic tool PO G 250 - Sheathing package for a max. 10% outer layer - Flex nozzle insert for Ø250/180, with this nozzle insert, all dimensions from Ø250 to Ø180 can be produced in SDR17 + SDR11. - Tool mounting carriage, swiveling by 90° - Internal cooling for oil or water in the spiral distributor - Pipes for a pipe head air cooling system are installed in the tool.