Tecnomac Systems S.r.l.

Condition: ready for operation (used), Year of construction: 2015, DMG UNIVERSAL MACHINE CENTER HSC 105 Linear Year 2015 Travel : X1.050 Y800 Z 500mm Heidenhain iTnc 530 control Spindle speed 28.000rpm Ffodpfx Aajytpgfe Eow ATC 32 HSK-A63 Table Ø900mm NC B axis -10o ~ +110o NC C axis 360 x 0.001o Electronic hand-wheel Chip conveyor Direct measuring system.

Condition: good (used), Year of construction: 2004, functionality: fully functional, Gildemeister GMX 400 Year of manufacture: 2004 Control system: Siemens 840 D Powerline Max. turning diameter: 640 mm Turning length: 1,585 mm Standard turning diameter: 400 mm Control: Sinumerik 840D powerline Siemens Distance between centers: 1,930 mm Main spindle: Type: ISM 90 Max. speed: 4,000 rpm Drive power - main spindle: 36 / 45 kW Max. torque: 600 Nm Spindle diameter front bearing: 150 mm Spindle bore: 107 mm Max. bar diameter: 102 mm C-axis: 0.001° Chuck diameter: 315 (max. 400) mm Milling spindle: Max. speed: 12,000 rpm Drive power - milling spindle: 13.2 / 22 kW Max. torque: 100 Nm Tool holder: HSK-A63 Holding torque: 500 Nm y-axis: +/- 110 mm b-axis: +/- 120° c-axis: 1° x-travel: 550 mm Bearing diameter: 80 / 55 mm Tool magazine: Number of tool slots: 120 positions Ffjdpfx Asytpfzsa Eow Tool holder: HSK-A63 Max. tool length: 350 mm Chip conveyor Feeds: Rapid traverse X1/Z1: 40/60 m/min Total power requirement: 70 kVA Machine weight approx.: 20.0 t

Condition: used, Year of construction: 2004, Machine Year of Manufacture Bar Loader Additional Information Hours Twin 42 2004 Irco Breuning SIMAG Hydraulic line defective at turret 1 or 2 79593 25020 Twin 42 2004 Irco Breuning SIMAG Dina module removed, pressure clamp (indicates collet is not closed) 69573 9625 Twin 42 2004 Irco Breuning SIMAG Machine operational and in production 72402 8375 Fsdpfx Aasytnywo Eofw Twin 42 2004 Irco Breuning SIMAG Main spindle defective with bearing damage, spindle clamp defective, LT module missing, Dina module missing Twin 42 2008 Irco Breuning SIMAG Machine operational and in production 5104 83790 Twin 42 2008 Irco Breuning ECO Profi multi-channel changer Machine operational and in production 99825 76595

Condition: excellent (used), Year of construction: 2018, operating hours: 3,370 h, functionality: fully functional, HWACHEON CNC Lathe Year of manufacture: 2018 Model: HI-TECH 230B YMC Control: FANUC 0i-TF with Manual Guide Ffsdpfx Aoytnunsa Eow Max turning diameter: Ø400 mm Max turning length: L-290 mm Machine weight: 4,400 kg Max spindle speed: 3,500 rpm Machining time: 2,040 operating hours Machine operating time: 3,370 operating hours Machine dimensions: 2100 x 3100 x 2000 mm Self-centering 3-jaw chuck on main spindle Ø250 mm, thru-hole Ø80 mm Through spindle, bore Ø80 mm Measuring probe Coolant system Chip conveyor Technical documentation (DTR) Listed price is net (exchange rate as of 11.3.2026), negotiable All additional information and the machine condition can be found in the photos. The lathe is regularly serviced and used in proper working conditions. Please contact me for further details or to arrange a viewing. Used for manufacturing components and spare parts for our own machines.

Condition: excellent (used), Year of construction: 2011, • 1 CNC lathe (132), manufacturer Miyano, model ABX-64SY, year 2011, control unit Fanuc, model 31i-Model A, main/sub-spindle, 2x 12-position turrets, bar feeder FMB Turbo 5-55, chip conveyor Yoshida. Ffedoytd Rxspfx Aa Eow

Condition: excellent (used), Year of construction: 2011, • 1 CNC lathe (129), manufacturer Miyano, model BNJ-51Y3, year 2011, control Fanuc, main/opposing spindle, 12-position and 6-position turret, chip conveyor, manufacturer LNS, type Turbo MH500 Ffjdpfx Aaeytd Dxj Esw

Condition: excellent (used), Year of construction: 2008, We are offering this very well-maintained Monforts RNC 600 MultiTurn CNC turning and milling center, year of manufacture 2008. Fsdpfxeyr N Hce Aa Esfw

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Biglia B346 Y2 including accessories Biglia 436Y2 Year of manufacture: 2016 Ffodsyr Iicspfx Aa Eew Control system: - Mitsubishi M700 Main spindle: - 100 - 7000 rpm - Spindle bore 46 mm Turret: - 12 stations - 12 stations for driven tools - Driven tools speed range: 100 - 6000 rpm Axes: - Travel X1 and X2 axes: 85 mm (main spindle and upper turret / sub spindle and lower turret unit) - Travel Z1 and Z2 axes: 300 mm (main spindle and upper turret / sub spindle and lower turret unit) - Travel Y1 and Y2 axes: +25 / -25 mm (main spindle and upper turret / sub spindle and lower turret unit) - Travel Z3 axis: 340 mm (sub spindle and lower turret unit) - Travel X3 axis: +85 / -85 mm (sub spindle and lower turret unit) Measurement: - Tool measurement Discharge: - Chip conveyor - Parts catcher Bar feeder: - Short bar loader Barload BS 65 (see photo) Accessories: - Driven tools, 5 pcs. - Tool holders, 9 pcs. - Boring bar holders, 10 pcs. Availability: - Immediately

Condition: used, 1 unit CNC turning center MAZAK SUPER QUICK TURN 15M MARKII. Max. turning diameter approx. 300 mm, max. turning length approx. 528 mm, spindle speed up to 5,000 rpm, 12-station turret. Travel paths: X-axis approx. 180 mm, Z-axis approx. 575 mm. Including tool cabinet and various accessories as per photos and inspection, self-dismantling. Dimensions (L/W/H): 70x55x105 cm. Condition: used. Ffsdpfx Ajyr H Tyja Eew Location of goods: Production hall / left Payment method: Advance payment by bank transfer Shipping: Collection only – No shipping offered for this item!

Condition: used, 1 piece 5-axis multifunction turning and milling center MAZAK INTEGREX 200Y with chip conveyor, tool holders, cutting tools, clamping devices, workbench 120x75x85 cm, 2 material cabinets, and various accessories, as per photos and inspection, self-dismantling required. Dimensions (L/W/H): 70x55x105 cm. Condition: used. Storage location: production hall / left. Payment method: advance payment by bank transfer. Shipping: pickup only – no shipping offered for this item! Fjdpfoyr H Tasx Aa Esfw

Condition: used, 1 unit CNC lathe MAZAK QUICK TURN 8NSP Fedpfx Aoyr H Rxea Esfw Max. turning diameter: 160mm, max. swing over bed: 300mm, spindle speed: 4,500 rpm, with various accessories and 2x material cabinets, as per photos and inspection, self-dismantling required Dimensions (L/W/H): 120x45x77cm Condition: used Storage location: production hall / right Payment method: advance payment by bank transfer Shipping: pickup only – shipping is not available for this item!

Condition: used, Year of construction: 1996, 1 pc. CNC turning center MAZAK SUPER QUICK TURN 15M MARKII with tool cabinet and various contents, as per photos and inspection, self-dismantling Year of manufacture: 1996 Dimensions (L/W/H): 70x55x105 cm Condition: used Storage location: Production hall / left Ffjdpfx Aajyr H Dle Eow Payment method: Advance payment by bank transfer Shipping: Collection only – shipping is not offered for this item!

Condition: used, 1 unit CNC machining center MAZAK NEXUS510C Travel distances X1050mm, Y510mm, Z510mm, with chip conveyor, tool holders, trolley 90x60x100cm, 2x material cabinets 70x55x105cm/50x50x100cm, with various contents, as shown in the photos and inspection, self-disassembly Condition: used Storage location: production hall / right Payment method: advance payment by bank transfer Shipping: Collection only - No shipping offered for this item! Ffodpfx Aeyr Hwfsa Eew

Condition: like new (used), Year of construction: 2021, operating hours: 3,500 h, functionality: fully functional, spindle speed (max.): 6,000 rpm, rotational speed (max.): 6,000 rpm, chuck outer diameter: 152 mm, bar diameter (max.): 51 mm, We are offering this Doosan PUMA TT1300SYB CNC turning and milling center in like-new condition, year of manufacture 2021. Manufacturer: Doosan Model: PUMA TT1300SYB Year of manufacture: 2021 Condition: Like new Category ID: 1128 Type ID: 2239 Machine type: CNC turning and milling center If you have any questions or require further information, please do not hesitate to send us a message or call us. For sale: Doosan PUMA TT1300SYB, almost new, from 2021, equipped with an automatic LNS SPRINT 565 S2 bar feeder, with driven tool stations and only 3,600 cutting hours. This is a high-end multitasking CNC lathe with dual synchronized spindles and dual Y-axis driven turrets, each with independent Y-axis movement. A unique machine in its category, designed for complete machining in a single setup. - Dual synchronized spindles - Dual turrets with driven tool holders - Upper and lower Y-axis (SYYB configuration) - Simultaneous machining on both sides - Drastically reduced cycle times - High precision and thermal stability - Spindle speed up to 6,000 rpm - Bar capacity up to Ø51 mm - 6” chuck - Prepared for automation and available with bar feeder for unattended production. Ideal for automotive, hydraulics, railway, aerospace, and highly complex technical components. Robust, productive, and extremely versatile machine. Ffodoyryymopfx Aa Eew Premium configuration rarely found on the used machinery market. Special price: 170,000 EUR. WORKING HOURS: ONLY 3,500 CUTTING HOURS. Available for inspection and functional testing. A strategic investment for workshops looking to increase productivity, reduce lead times, and improve margins from day one.

Condition: used, Year of construction: 2018, machine/vehicle number: IntNr231502, CNC Short Turning Lathe – Citizen Miyano BNE-51MSY Year of manufacture: 2018 Condition: Very good, fully operational Availability: Available at short notice Description For sale is a Citizen Miyano BNE-51MSY CNC short-turning lathe in MSY configuration with main and sub spindle as well as Y-axis. Equipment / Highlights • Main spindle + sub spindle • Y-axis • 2 tool turrets, each with 12 stations • Powered tools • Simultaneous machining possible • High rigidity and process reliability Technical data • Max. bar capacity: Ø 51 mm • Max. turning diameter: approx. 165 mm • Max. turning length: approx. 380 mm • Main spindle speed: up to approx. 5,000 rpm • Sub spindle speed: up to approx. 5,000 rpm • CNC control: Mitsubishi MELDAS • Machine weight: approx. 8,000 kg Ffsdpeyrx Rdjfx Aa Esw The machine is fully functional both electrically and mechanically. Complete technical documentation available. The machine can be inspected under power by appointment. Subject to prior sale, technical modifications, and errors!

Condition: used, Year of construction: 2023, machine/vehicle number: IntNr231501, CNC Lathe – DN Solutions (Doosan) LEO 1600 Year of manufacture: 2023 Equipment / Highlights - Horizontal CNC lathe - High-performance main spindle - Robust machine construction for precise dimensional accuracy - Tool turret with rapid indexing - Compact design, minimal footprint - User-friendly CNC control - High reliability and low maintenance requirements Technical Data - Max. turning diameter: approx. 300 mm - Max. turning length: approx. 300 mm - Spindle bore: approx. Ø 52 mm - Main spindle speed: up to approx. 4,500 rpm - Tool turret: 12 stations - Control: FANUC CNC - Machine weight: approx. 2,200 kg The machine is fully operational, both electrically and mechanically. Comprehensive technical documentation available. Ffedpfoyrx Nmjx Aa Eew The machine can be inspected under power by appointment. Subject to prior sale. Technical specifications and details are subject to change or error.

Condition: used, Year of construction: 2023, controller manufacturer: Mazak, controller model: Mazatrol SmoothAi, _____ Description: Year of manuf. : 2023 Control : Mazak Mazatrol SmoothAi Turning diam. : 600 mm Turning length : 850 mm In General: Year of manufacture:2023 Control system:Mazak Mazatrol SmoothAi Max. machining diameter:600 mm Max. machining length:850 mm Main spindle: Technology:Motor spindle Speed:6,000 rpm Power:11 kW Max. torque:184 Nm Bar capacity:51 mm Fedpfx Asyrvzmsa Esfw C-axis:0.0001° Chuck:3-jaw chuck Clamping cylinder:Hollow clamping cylinder Sub spindle: Technology:Motor spindle Speed:6,000 rpm Power:11 kW Max. torque:184 Nm Bar capacity:51 mm C-axis:0.0001° Tailstock function:Yes Tool carrier (X/Y/ZB): Technology:Travelling column with milling spindle X-axis:535 mm Y-axis:210 mm Z-axis:900 mm B-axis:-30° / +210° Milling spindle speed:20,000 rpm Power:24 kW Tool magazin: Technology:Shelf magazine Number of stations:250 Tool changer:Double gripper Equipment: Chip disposal:Chip conveyor Coolant supply:Internal coolant system, 15 bar Workpiece measurement:Renishaw RMP 60 Tool measurement:Renishaw tool setter Bar loader:IRCO ILS-MUK 7012 Finished part removal:Parts catcher Software option I:5-axis simultaneous machining Software option II:Synchronous thread cutting Software option III:Cylinder interpolation Software option IV:Tool radius compensation Software option V:Tool length compensation Emulsion mist separator:Mechanical Setup mode:Electronical handwheel

Condition: ready for operation (used), Year of construction: 2023, spindle motor power: 55,000 W, spindle speed (max.): 1,500 rpm, travel distance X-axis: 470 mm, travel distance Z-axis: 3,235 mm, total height: 2,590 mm, total width: 2,772 mm, controller manufacturer: FANUC, controller model: 0i-F Plus, product length (max.): 7,360 mm, number of axes: 3, This 3-axis DN SOLUTIONS PUMA 700LM was manufactured in 2023. As new, showroom model. It features a maximum turning length of 3,200 mm and a swing over bed of 900 mm, making it suitable for heavy-duty operations. The machine is equipped with a robust 24" chuck and a powerful spindle motor with a maximum torque of 8,076 Nm. If you are looking to get high-quality turning capabilities, consider the DN SOLUTIONS PUMA 700LM turn-mill centre we have for sale. Contact us for further details. • As new, showroom model • Chuck size: 24" (610 mm) • Bar capacity: 164 mm • Rapid traverse (X/Z): 12 / 10 m/min • Max torque: 8,076 Nm • Swing over bed: 900 mm • Spindle motor power: 55 / 45 / 37 kW • Max turning length: 3,200 mm • Turret: 12 stations, BMT 85 interface • Guideway type: Box guideway • Tailstock: Programmable with integrated quill bearing • Application: Universal heavy-duty center for interrupted cuts and high-precision shaft production • Material/casting: Meehanite cast design for high damping • Rigidity: Box guideways for extreme stability in heavy-duty operations Additional equipment Fedpfeyrt Hajx Aa Ejfw • Steady rest: Steady rest carrier SLUSZ • Calibration: Tool setter (auto-hydraulic) • Automation: Auto door • Cooling: High-pressure turret cooling, 14.5 bar • Maintenance tools: Compressed air gun; oil skimmer Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2022, spindle motor power: 18,500 W, spindle speed (max.): 4,500 rpm, travel distance X-axis: 230 mm, travel distance Z-axis: 580 mm, total height: 1,759 mm, total width: 1,632 mm, controller manufacturer: FANUC, controller model: 0i-F Plus, product length (max.): 2,941 mm, number of axes: 3, This 3-axis DN SOLUTIONS PUMA GT2100M was manufactured in 2022. As new, showroom model. It features a maximum spindle speed of 4,500 RPM and a robust turret with 12 stations. The machine is designed for high-precision turning and milling, with an X travel of 230 mm and Z travel of 580 mm. If you are looking to get high-quality turning capabilities, consider the DN SOLUTIONS PUMA GT2100M turn-mill centre we have for sale. Contact us for further details. • As new, showroom model • Chuck size: 8" (204) Ffsdpjyrt Evjfx Aa Esw • Bar capacity: 65 mm • Rapid traverse (X/Z): 24 / 30 m/min • Turret: 12 stations, BMT 55 interface • Guideway type: Box guideway • Cooling system: Coolant pump 7 bar • Monitoring: Load monitoring • Design: Box-guided horizontal turning center with high torque • Performance: Optimized for stable and high-precision machining • Construction: High-speed turret and rigid spindle design Additional equipment • Oil skimmer (filtration) • 3-color signal light (automation) Technical Specification Counter Spindle No Driven Tools No

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, turning length: 1,000 mm, turning diameter: 350 mm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,020 mm, CNC Lathe Manufacturer: Okuma Model: LB15 II-M 1SC-1000 Year of Manufacture: 1996 Control: OSP-7000L Country of Origin: Japan Delivery: Ex-stock Machine Features - Long turning length - Tailstock - Chip conveyor - Live tooling - One touch - IGF - Touch setter Technical Specifications - Working Areas - Swing diameter: 340 mm - Max. turning diameter: 350 mm (chuck work) - Max. turning length: 1000 mm Travel Distances - X-axis: 260 mm - Z-axis: 1020 mm Spindle - Speed: 45~4500 rpm - Standard spindle bore diameter: 62 mm - Spindle front bearing bore diameter: 100 mm - Chuck passage: 52 mm Turret - Number of stations: 12 - Tool holder: VDI40 - Indexing time station to station: 0.1 sec Feed Rates - Rapid traverse X/Z: 15,000/20,000 mm/min Tailstock - Quill diameter: 90 mm - Quill stroke: 120 mm Ffsdpfx Ajyrtkrsa Esw Main Drive - Spindle motor: 15/11 kW Machine Dimensions: approx. 3315 x 1895 mm Machine Height: approx. 1905 mm Weight: approx. 5700 kg Optional - Transport organization and handling - Machine installation and setup - Commissioning of the machine

Condition: ready for operation (used), Year of construction: 2023, spindle motor power: 26,000 W, spindle speed (max.): 4,000 rpm, travel distance X-axis: 630 mm, travel distance Z-axis: 1,585 mm, total height: 3,025 mm, total width: 2,360 mm, controller manufacturer: FANUC, controller model: 0i-F with 15" display, product length (max.): 5,125 mm, number of axes: 7, This 7-axis DN SOLUTIONS PUMA MX2600ST was manufactured in 2023. As new, showroom model. It features a maximum spindle speed of 4,000 RPM and a bar capacity of 76 mm. The machine is equipped with a multi-tasking configuration, including 3 spindles and a lower turret with 12 stations. If you are looking to get high-quality milling and turning capabilities, consider the DN SOLUTIONS PUMA MX2600ST mill-turn centre we have for sale. Contact us for further details. Ffsdpoyrtc Uefx Aa Eew • As new, showroom model • Configuration: Multi-tasking with 3 spindles and lower turret • Chuck size: 10" (255 mm) • Bar capacity: 76 mm • Travels: • X1 / X2: 630 / 230 mm • Z: 1,585 mm • Axis count: 7 (fully controlled) • X1 / Z1 / Y1: Milling spindle axes • B-axis: Milling spindle swivel/tilt (approx. 240° range) • X2 / Z2: Lower turret axes • C-axis: Spindle indexing/rotation • Spindle motor power: 26 / 22 kW • Spindle architecture: 3 spindles including top-mounted milling spindle • Lower turret: 12 stations, BMT 65 interface • Tooling interface: CAPTO C6 (milling head) • Guideway type: Linear guideway • Precision: 0.001° indexing accuracy in B and C axes • Thermal control: Intelligent heat compensation and optimized cooling to minimize thermal displacement • Cooling system: Coolant flushing for right/left spindle; high-pressure coolant through lower turret and milling spindle • Filtration/monitoring: Level monitoring; flow monitor • Data/software: AICC contouring; Data Server 1 GB Additional equipment • Renishaw RMP60 probe • Tool setter • Auto door (automation) • Oil skimmer

Condition: ready for operation (used), Year of construction: 2023, spindle motor power: 22,000 W, spindle speed (max.): 5,000 rpm, travel distance X-axis: 165 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 700 mm, total height: 2,250 mm, total width: 2,360 mm, controller manufacturer: FANUC, product length (max.): 3,880 mm, number of axes: 8, This 8-axis DN SOLUTIONS PUMA TT2100SYY was manufactured in 2023. As new, showroom model. It features a twin-spindle and twin-turret configuration, with a maximum spindle speed of 5,000 RPM and a bar capacity of 65 mm. The machine is equipped with 24 turret stations and high-rigidity linear roller guides for enhanced stability. If you are looking to get high-quality turning capabilities, consider the DN SOLUTIONS PUMA TT2100SYY turn-mill centre we have for sale. Contact us for further details. • Chuck size: 8" (204 mm) • Bar capacity: 65 mm • X1/X2 travel: 165 / 100 mm • Z1/Z2 travel: 700 / 700 mm • Y1/Y2 travel: 30 / 40 mm • Spindle motor power: 22 / 18.5 / 15 kW • Turret stations: 24 (12 + 12) • Turret interface: BMT 55 • Guideway type: High-rigidity linear roller guides • Spindle type: Integral motor spindle with wide speed range • Turret capability: Upper and lower turrets with Y-axis and 12 driven stations each • Structural design: Highly stable Y-axis design for high-volume serial production Additional equipment Ffodpoyrtbqjfx Aa Ejw • Cooling and filtration: High-pressure coolant through turret; Oil skimmer • Sub-spindle features: Coolant supply through sub-spindle; Parts ejector • Parts handling: Parts catcher; Parts conveyor for both spindles • Calibration: Tool setter (auto-electric) • Automation and interfaces: Air conditioning (electrical cabinet); Bar feeder interface; 3-color tower light Additional Information As new, showroom model Technical Specification Driven Tools Yes Counter Spindle No

Condition: ready for operation (used), Year of construction: 2019, spindle motor power: 15,000 W, spindle speed (max.): 6,000 rpm, travel distance X-axis: 135 mm, travel distance Y-axis: 30 mm, travel distance Z-axis: 230 mm, total height: 2,070 mm, total width: 2,300 mm, controller manufacturer: FANUC, product length (max.): 3,510 mm, number of axes: 8, This 8-axis DN SOLUTIONS PUMA TT1300SYYB turn-mill centre was manufactured in 2019. As new, showroom model. It features a twin-spindle and twin-turret configuration, allowing for independent operation. With a maximum spindle speed of 6,000 RPM and integrated high-speed C-axis and Y-axis, it offers advanced capabilities for complex machining. If you are looking to get high-quality turning capabilities, consider the DN SOLUTIONS PUMA TT1300SYYB machine we have for sale. Contact us for further details. • Configuration: Twin-spindle / twin-turret (independent operation) • Chuck size: 6" (170) • Bar capacity: 51 mm • Travels: X1/X2 135/80 mm; Z1/Z2 530/530 mm; Y-axis 30/40 mm • Spindle motor power: 15 / 11 / 7.5 kW • Turret stations: 12 / 12 (BMT 45) • Guideways: Roller guideway • Capabilities: Integrated high-speed C-axis and Y-axis for complex machining Additional equipment • High-pressure coolant through turret • Oil skimmer • Coolant supply through right/sub-spindle • Parts ejector (sub-spindle) • Parts catcher at main spindle with collection box • Parts removal conveyor belt for sub-spindle • Tool setter (automatic electric) • Automatic shut-off Ffsdsyrr Suepfx Aa Ejw • Bar feeder interface (bar feeder not included) • 3-color status light Additional Information As new, showroom model Technical Specification Counter Spindle No Driven Tools Yes

Condition: used, Year of construction: 2019, Control: MITSUBISHI M730UM with CELOS Fsdpjyrrxhsfx Aa Ejfw Main spindle with integrated motor spindle ISM 80: 15/18.5 kW Speed range: 10–4000 rpm 10" hollow chuck 254mm KITAGAWA BB210A821 Counter spindle with integrated motor spindle ISM 65 Speed range: 10–5000 rpm 10" hollow chuck 254mm KITAGAWA BB208A621 20-position BMT star turret KNOLL high-pressure coolant system 70 bar Y-axis with 100mm travel Gantry loading system LG-10AI

Condition: used, Year of construction: 2008, functionality: fully functional, Turning / milling center with counter spindle with 10 CNC axes (X1, X2, Z1, Z2, Y1, Y2, B1, B2, C1, C2) Control: FANUC 31:iA Ffedsyrrw Rspfx Aa Ejw Main Spindle Power: 15/11 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Counter Spindle Power: 11/7,5 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Turning and milling spindle Power: 7,5/3,7 kW Turning and milling spindle speed: 12.000 min-1 max. rotation length turret bottom: 1.005 mm Slide cross X1 / X2 / Z1 / Z2 / B2: 455 / 222,5 /1.090 / 1.005 / 1.008 mm Slide cross Y1 / Y2: +/- 70 / +20, -50 mm Swivel range B1 axis: +/- 95 ° Linear rack magazine incl. support robot CNC support steady rest Coolant cyclone filter system incl. 2 pcs. coolant pumping spindle oil cooler