Alexandru GE Smart Invest

Condition: used, Year of construction: 2023, load capacity: 7,000 kg, lifting height: 24,800 mm, fork length: 1,200 mm, total length: 8,870 mm, - Max. Tragkraft 7000 kg - Max.Hubhöhe 24.80 m - Maximale seitliche Reichweite 20.50 m - Kippwinkel 12 ° - Schüttwinkel 110 ° - Drehung des Oberwagens 360 ° - Antriebsräder (vorne / hinten) 2 / 2 - Lenkart 2-rad Lenkung, 4-rad Lenkung, Krebsgang - Stützentyp Zweifach-Teleskop - Steuerung mit Stützen Stützenbefehle einzeln oder gleichzeitig - Motor Hersteller: Yanmar - Motornorm Stage V / Stufe 4 - Motor Modell 4TN107FTT-6SMU1 - Nennleistung Verbrennungsmotor / Leistung (kW) 173 Hp / 127 kW - Max. Drehmoment / Engine rotation (min) 805 Nm @ 1500 rpm - Anzahl der Zylinder - Tragfähigkeit der Zylinder 4 - 4567 cm³ - Kühlsystem des Motors Wasserkühlung - Anzahl Batterien / Batterie 2 x 12 V - 12V Battery capacity 120 Ah - Battery starting current (EN)850 A - Getriebetyp Hydrostatic with Speedshift - Getriebe / Anzahl der Gänge (vorwärts) / Anzahl der Gänge (rückwärts) Speedshift / 2 / 2 - Max. travel speed 40 km/h - Zugkraft 9200 daN - Parkbremse Automatische negative Parkbremse - Festellbremse: Ölbad Lamellenbremsen an den Vorder- und Hinterachsen - Steigfähigkeit - beladen / unbeladen 32.40 % / 41.40 % - Pumpenart Verstellpumpe - Hydraulikfördermenge 185 l/min - Hydraulikdruck 350 bar - Motoröl 13 l - Hydrauliköl 300 l - Fassungsvermögen des Kraftstofftanks 320 l - Abgasnachbehandlung für Diesel (AdBlue®) 24 l - Geräuschpegel im Fahrerstand (LpA) 67 dB - Außenschallpegel (LwA) 108 dB - Vibrationswert an Händen/Armen < 2.50 m/s² - Lenkräder (vorne / hinten) 2 / 2 - Steuerungen 2 Joysticks - Sicherheit Zulassung der Kabine Kabine ROPS - FOPS Stufe 2 Bjdpfe Ahzn Aex Aknslp - Anbaugeräte Erkennungssystem (E-Reco) Standard

Condition: used, Year of construction: 2023, load capacity: 7,000 kg, lifting height: 24,800 mm, fork length: 1,200 mm, total length: 8,870 mm, - Max. Tragkraft 7000 kg - Max.Hubhöhe 24.80 m - Maximale seitliche Reichweite 20.50 m - Kippwinkel 12 ° - Schüttwinkel 110 ° - Drehung des Oberwagens 360 ° - Antriebsräder (vorne / hinten) 2 / 2 - Lenkart 2-rad Lenkung, 4-rad Lenkung, Krebsgang - Stützentyp Zweifach-Teleskop - Steuerung mit Stützen Stützenbefehle einzeln oder gleichzeitig Bjdpfx Aks Ahznxsnolp - Motor Hersteller: Yanmar - Motornorm Stage V / Stufe 4 - Motor Modell 4TN107FTT-6SMU1 - Nennleistung Verbrennungsmotor / Leistung (kW) 173 Hp / 127 kW - Max. Drehmoment / Engine rotation (min) 805 Nm @ 1500 rpm - Anzahl der Zylinder - Tragfähigkeit der Zylinder 4 - 4567 cm³ - Kühlsystem des Motors Wasserkühlung - Anzahl Batterien / Batterie 2 x 12 V - 12V Battery capacity 120 Ah - Battery starting current (EN)850 A - Getriebetyp Hydrostatic with Speedshift - Getriebe / Anzahl der Gänge (vorwärts) / Anzahl der Gänge (rückwärts) Speedshift / 2 / 2 - Max. travel speed 40 km/h - Zugkraft 9200 daN - Parkbremse Automatische negative Parkbremse - Festellbremse: Ölbad Lamellenbremsen an den Vorder- und Hinterachsen - Steigfähigkeit - beladen / unbeladen 32.40 % / 41.40 % - Pumpenart Verstellpumpe - Hydraulikfördermenge 185 l/min - Hydraulikdruck 350 bar - Motoröl 13 l - Hydrauliköl 300 l - Fassungsvermögen des Kraftstofftanks 320 l - Abgasnachbehandlung für Diesel (AdBlue®) 24 l - Geräuschpegel im Fahrerstand (LpA) 67 dB - Außenschallpegel (LwA) 108 dB - Vibrationswert an Händen/Armen < 2.50 m/s² - Lenkräder (vorne / hinten) 2 / 2 - Steuerungen 2 Joysticks - Sicherheit Zulassung der Kabine Kabine ROPS - FOPS Stufe 2 - Anbaugeräte Erkennungssystem (E-Reco) Standard

Condition: used, Vertical multistage high-pressure centrifugal pump GRUNDFOS Type CR8-80 A-A-A-BUBE Model B4250008 P1 9535 Year of manufacture 1995 Nominal flow rate 9.5 m³/h Nominal head 67 meters = 6.7 bar Pump pressure max. 16 bar Bodpfs Ahzl Sjx Aknslp Operating temperature max. 120 °C Nominal speed 2900 rpm Motor power 3 kW Mains connection 400 volts, 50 Hz - Pump design with 8 stages - Pump components made of stainless steel 1.4301, pump base made of cast iron - Connection flanges DN 40 - Suitable for potable water supply, irrigation and drainage Space requirement pump L x W x H 250 x 200 x 870 mm Weight 50 kg Very good condition, overhauled from stock, not used after overhaul Not a submersible pump or a deep well pump.

Condition: used, Tailstock for MEUSER lathe Tailstock spindle taper: MK 4 Quill travel: 140 mm Bed width: approx. 150 mm (measured in the center) Center height: 200 mm - suitable for MEUSER lathe, type M0P Dimensions L x W x H: 550 x 300 x 400 mm Bodpfx Aj Ahzl Ioknelp Weight: 80 kg in good condition

Condition: used, Universal tool and cutter grinding machine DECKEL, Type FP 3 Serial No. 2201 - 5240, Year of manufacture 1981 Control system Type 2201, Serial No. 5594 Travel distances: X: 500 mm, Y: 300 mm, Z: 380 mm (manual adjustment and without bellows) Travel distances: X: 490 mm, Y: 290 mm, Z: 340 mm (with feed) Table size: 800 x 420 mm Spindle mount: SK 40 - S20x2 Tailstock travel: 100 mm Bledpj Ahzl Djfx Aknop Spindle speed: 25 - 2500 rpm, 18 steps Feed rate: Feed 5 to 500 mm/min. Rapid traverse speed: approx. 1200 mm/min. Motor power, spindle drive: 2/4 kW, pole-switching Power connection: 380 Volt, 50 Hz - Active digital display for 3 axes, HEIDENHAIN Type TNC 111 - Stepless feed in the X, Y and Z axes - Mechanical handwheels for all three axes - Spindle speed via 2 motor speeds and 18 gear stages - Vertical milling head, swiveling and extendable 200 mm horizontally - Fixed angular table 800 x 420 mm - Coolant system with mechanical pump in the machine base - Central lubrication - Control cabinet located beside the machine - Protective enclosure with hinged doors around the machine table - Original chip tray for attachment to the machine base Space requirement L x W x H: 1600 x 1600 x 1750 mm Weight: 1400 kg Good condition

Condition: ready for operation (used), Year of construction: 2008, operating hours: 56 h, load capacity: 2,000 kg, lifting height: 6,750 mm, fuel type: electric, construction height: 2,780 mm, empty load weight: 3,590 kg, mileage: 56 km, obtained through trade-in - electric triple-mast reach truck - year of manufacture 2008 Bjdpfx As Ahzlysknelp - capacity of 2,000 kg - lifting height of 6,750 mm - all functions are in good working order - FREELIFT and SIDESHIFT - reasonable battery from 2008 - an external charger video to follow

Condition: good (used), Year of construction: 2019, operating hours: 662 h, load capacity: 500 kg, fuel type: electric, empty load weight: 110 kg, mileage: 662 km, - Electric city pallet truck - Suitable for curbs and thresholds up to 70 cm Blods Ahzlvopfx Aknsp - Year of manufacture: 2019 - Capacity: 500 kg - Only 662 operating hours - Battery - With charger The STILL CiTi One is revolutionizing the transport of goods in the city. These electrically powered low-lift pallet trucks are very quiet. With a self-weight of only 95 kg, curbs and thresholds up to 70 mm can be easily overcome thanks to the climbing guides. It can be used on any type of floor thanks to the profiled solid rubber drive wheel. Both the operator and the environment benefit from extremely quiet operation. All of this makes the STILL CiTi One the ideal partner for the final stage of urban goods delivery: for shop owners, market traders, or in hospitals, offices, and recreational parks.

Condition: good (used), Year of construction: 2022, operating hours: 360 h, load capacity: 2,000 kg, fuel type: electric, empty load weight: 600 kg, mileage: 360 km, - Electric pallet truck - Brand: Still - Year of manufacture: 2022 - Only 360 hours on the meter - Capacity: 2,000 kg - Fork length: 1600 mm - Battery: 2023 - Maintenance-free battery - Includes charger Bjds Ahzlrspfx Aknslp - Watch the video on YouTube

Condition: excellent (used), mileage: 461,781 km, first registration: 09/1999, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, suspension: steel, total length: 8,100 mm, total width: 2,600 mm, total height: 3,500 mm, loading space length: 6,050 mm, loading space width: 2,420 mm, loading space height: 2,300 mm, Equipment: tail-lift, Despite our care in ensuring the data is entered correctly, we cannot be held responsible for any errors in this advertisement. Images may differ from the actual product. TLD Trucks & Vans BV Wolfstee 44 B-2200 Herentals Belgium Tel: Leemans Thierry Tel: Leemans Dino = More information = General information Year of manufacture: 1999 Axle configuration Suspension: Leaf spring suspension Front axle: Steerable Rear axle: Double tires Weights Unladen weight: 6,520 kg Payload: 970 kg Gross vehicle weight: 7,490 kg Functional Tail lift: Rear tailgate Condition Technical condition: very good Optical condition: very good Bedpj Ahzlksfx Aknslp More information Please contact Thierry Leemans for more information.

Condition: good (used), Year of construction: 2018, operating hours: 3,823 h, load capacity: 1,400 kg, lifting height: 2,844 mm, fuel type: electric, mast type: duplex, construction height: 1,915 mm, mileage: 3,822 km, - Electric DUO stacker - Brand: Still - Year of manufacture: 2018 Bledpfx Ao Ahzlgsknep - Capacity: 1,400 kg - Lifting height: 2,844 mm - Mast lowered height: 1,915 mm - Equipped with free lift - Initial lift, ideal for uneven floors - Battery - Includes charger - ONLY 3,822 operating hours Watch the video on YouTube.

Condition: used, empty load weight: 9,400 kg, axle configuration: 3 axles, first registration: 12/2016, tire size: 385-65 R22.5-385-65 R22.5, Year of construction: 2016, Ref: F0737898 Equipment: * Air connection: Other, * Electrical connection: 1 x 15-pin + 2 x 7-pin, * ABS, * EBS, * Refrigeration unit, * Temperature recorder, * Pallet capacity: 36 pallets, * Lift axle: 1, * Wheel chocks: 2, * Toolbox: 1, * Spare wheel holder: 1, * Access ladder, * Rear door design: Rear portal doors, * Locking bars on rear doors: 2, * Floor: Aluminum floor, * Double-deck system, * Partition, * Flower width, * Lashing rails: 1, * Double-deck beams: 22 VIN: WKESD00000737898 Tire size: 385-65 R22.5 Internal length: 13.31m Width: 2.6m Internal width: 2.5m Height: 4.02m Bledpfxs Ahzk Rs Aknjp Internal height: 2.65m

Condition: used, mileage: 270,400 km, power: 130 kW (176.75 HP), first registration: 05/2011, fuel type: diesel, empty load weight: 8,160 kg, maximum load weight: 3,740 kg, overall weight: 11,990 kg, tire size: 265/70R19.5, axle configuration: 4x2, wheelbase: 3,560 mm, next inspection (TÜV): 02/2027, brakes: engine braking, color: orange, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel, number of seats: 5, loading space length: 4,000 mm, loading space width: 2,350 mm, loading space height: 400 mm, Equipment: ABS, additional headlights, air conditioning, cabin, crane, differential lock, fog lights, low noise, onboard computer, parking heater, power assisted steering, trailer coupling, Vehicle location: en route / in transit, steel body, long cab, 1 air-suspended seat, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, auxiliary heater, ABS (anti-lock braking system), constant throttle, auxiliary drive, differential lock, fog lights, storage compartment, leaf spring suspension, trailer hitch ball head, trailer hitch with air and light connections, low-noise G1, winter service equipment, underbody protection, rotating beacon, roof hatch, crane at the rear, detachable, emergency stop, grapple control, foldable, 2-point mechanical support, radio remote control, 2 hydraulic outriggers, green environmental badge Blsdpj Ahzkqsfx Aknep Wheelbase: 3560 mm, Body: Meiller 3-sided tipping body, 5 seats, steel sideboards that can be folded down, spring-relieving, detachable Hiab rear-mounted crane 055 B-2, 7.20m - 660 kg, radio control, windows at the front and rear, load diagram: 2.7m-1,900kg, 7.2m-660kg, swivel chains, 2 shell grapples and a wood grapple available at an extra cost, Beilharz municipal hydraulics, height-adjustable winter service plate, also available without crane for €26,900.00, data subject to change as the vehicle is en route! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors!

Condition: used, empty load weight: 5,248 kg, maximum load weight: 30,752 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 08/2019, loading space length: 7,300 mm, loading space width: 2,440 mm, loading space height: 1,350 mm, loading space volume: 24 m³, suspension: air, tire size: 385/65R22.5, color: white, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, aluminum body, 3 axles, SAF axles, air suspension, 1st axle can be lifted, raise/lower function, ABS (anti-lock braking system), roll-over cover, catwalk, tailgate, U-shaped guard, tipper body. Bods Ahzkuspfx Aknjlp Body: 3-axle aluminum box tipper with roll-over cover, approximately 24 m³, 3 x 9-ton SAF axles, drum brakes, 1st axle can be lifted! ACCESSORY INFORMATION IS WITHOUT GUARANTEE; subject to changes, prior sale and errors.

Condition: used, mileage: 1,001 km, first registration: 01/2010, axle configuration: 4x2, brakes: engine braking, color: black, driver cabin: other, gearing type: other, suspension: steel, Year of construction: 2010, Equipment: low noise, Vehicle location: en route / in transit, emergency stop, gripper control, foldable, 2-point mechanical support, wireless remote control, 2x hydraulic outriggers. Superstructure: Hiab rear-mounted crane 055 B-2, 7.20m - 660 kg, wireless control, load chart: 2.7m-1,900kg, 7.2m-660kg, kingpin hitch available, data subject to change as the crane is en route! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors! Bledpfx Ako Ahzkxonop

Condition: used, mileage: 270,400 km, power: 130 kW (176.75 HP), first registration: 05/2011, fuel type: diesel, empty load weight: 6,500 kg, maximum load weight: 5,490 kg, overall weight: 11,990 kg, tire size: 265/70R19.5, axle configuration: 4x2, wheelbase: 3,560 mm, next inspection (TÜV): 02/2027, brakes: engine braking, color: orange, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel, number of seats: 5, loading space length: 4,000 mm, loading space width: 2,350 mm, loading space height: 400 mm, Equipment: ABS, additional headlights, air conditioning, cabin, differential lock, fog lights, low noise, parking heater, power assisted steering, trailer coupling, Vehicle location: en route / in transit, steel body, long cab, 1 air suspension seat, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, auxiliary heater, ABS (anti-lock braking system), constant throttle, auxiliary drive, differential lock, fog lights, storage compartment, leaf spring suspension, trailer hitch ball head, trailer hitch air + light, low-noise G1, winter service equipment, underrun protection, rotating beacon, green environmental badge Bsdpfo Ahzk Asx Aknelp Wheelbase: 3560 mm, body: Meiller 3-way tipper body, 5 seats, steel side panels that can be folded down, relieving spring load, windows at the front and rear, load chart: 2.7m - 1900kg, 7.2m - 660kg, spreading chains, side wall extension 50 cm, Beilharz municipal hydraulics, height-adjustable winter service plate, also available with detachable rear crane for € 32,900.00, (90289) Data subject to change, as the vehicle is en route! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors excepted!

Condition: used, mileage: 137,280 km, power: 175 kW (237.93 HP), first registration: 12/2018, fuel type: diesel, empty load weight: 6,750 kg, maximum load weight: 8,250 kg, overall weight: 15,000 kg, axle configuration: 4x2, wheelbase: 4,760 mm, next inspection (TÜV): 08/2027, brakes: engine braking, color: grey, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, loading space length: 7,250 mm, loading space width: 2,450 mm, loading space height: 2,490 mm, Equipment: ABS, air conditioning, cabin, cruise control, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, power assisted steering, seat heater, spoiler, tail-lift, traction control, trailer coupling, Vehicle location: Bovenden, ClassicSpace, Active Brake Assist, Mercedes PowerShift 3, Sleeper cab, 1 comfort seat, seat heating, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, cruise control, ABS (anti-lock braking system), traction control (ASR), constant throttle, frame cladding, leaf-air suspension, tarpaulin and bows, lashing points, underbody protection, pendulum flaps, roof hatch, aluminum loading platform, fixed, green environmental badge Wheelbase: 4760 mm, Body: Young flatbed body with sliding tarpaulin, Edscha cover and BÄR BC 1500 loading platform. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! Bjdpfx Ako Ahzk Hsnelp

Condition: used, Year of construction: 2016, color: green, overall weight: 12,000 kg, maximum load weight: 9,846 kg, empty load weight: 2,154 kg, loading space volume: 7 m³, loading space width: 2,420 mm, loading space length: 5,200 mm, loading space height: 500 mm, mileage: 1,001 km, first registration: 01/2016, gearing type: other, driver cabin: other, Equipment: central locking, crane, Vehicle location: Bovenden. Equipped with: tailgate, lashing points, crane located behind the building, emergency stop, grapple control, foldable, 2-point hydraulic support, wireless remote control, 3x hydraulic outriggers. Bljdpfe Ahzkmjx Aknop Superstructure: roll-off tipper with loading crane, Atlas 105.1, wireless control, grapple control, foldable, drop-down side walls, swing-out tailgate, approx. 6.8 m³, in excellent condition, hardly used. Roll-off container with crane Atlas 105.1, swing-out tailgate, drop-down side walls, wireless control, grapple control. Stone grapple -3692- and 2-clam grapple -3693- available at an additional cost of €2,200.00 each (net). Load diagram: 1.9 m - 4,970 kg, 3.8 m - 2,790 kg, 5.5 m - 1,860 kg, 8.9 m - 1,110 kg. In excellent condition, as it has hardly been used and has always been stored indoors. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: used, empty load weight: 5,960 kg, maximum load weight: 30,040 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 10/2021, next inspection (TÜV): 12/2025, loading space length: 7,350 mm, loading space width: 2,330 mm, loading space height: 1,470 mm, loading space volume: 25 m³, suspension: air, tire size: 385/65R22,5, color: red, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, steel body, 3 axles, SAF axles, air suspension, 1st axle liftable, ABS (anti-lock braking system), catwalk, flap, foldable underride guard, supports. Body: Hardox tipper approx. 24/26 m³, 10 units AVAILABLE! 3x 9t SAF axles, drum brakes, 5 mm Hardox floor, 4 mm sides, tyres 50-80%. ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE, subject to change, prior sale and errors excepted! Bledpfx As Ahzkisknop

Condition: excellent (used), mileage: 689,237 km, first registration: 03/1987, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: blue, driver cabin: sleeper cab, gearing type: mechanical, suspension: steel, total length: 8,450 mm, total width: 2,600 mm, total height: 3,870 mm, loading space length: 6,050 mm, loading space width: 2,430 mm, loading space height: 2,600 mm, Despite the care taken in entering the data correctly, we cannot be held responsible for any errors in this advertisement. Images may differ from the actual vehicle. TLD Trucks & Vans BV Wolfstee 44 B-2200 Herentals Belgium Tel: Leemans Thierry Tel: Leemans Dino = Further Information = Bedpfx As Ahzkfjknelp General Information Year of manufacture: 1987 Technical Information Number of cylinders: 8 Axle Configuration Suspension: Leaf spring Front axle: Steerable Rear axle: Dual tires Weights Unladen weight: 8,490 kg Payload: 10,960 kg GVW: 19,450 kg Condition Technical condition: very good Optical condition: very good Further Information Please contact Thierry Leemans for more information.

Condition: good (used), Year of construction: 2020, operating hours: 615 h, load capacity: 1,600 kg, fuel type: electric, empty load weight: 460 kg, mileage: 615 km, - Electric pallet truck Bljdpfx Ae Ahzkboknop - Brand: Still - Year of manufacture: 2020 - Only 615 operating hours - Capacity: 1,600 kg - Fork length: 1150 mm - Battery - Equipped with an INTERNAL charger

Condition: used, Year of construction: 1989, clamping plate 595 x 445 mm drawing length 400 mm stroke 400 mm serial number 890402 weight of the machine ca. 1.600 t dimensions of the machine ca. 1.400 x 1.200 x 1.500 mm Minimum/maximum cutting speed: 0 - 20 m/min Minimum/maximum return speed: 40 m/min Maximum workpiece diameter according to DIN6885 (bore): 230 mm Blsdpfx Aks Ahzi Tenjp

Condition: good (used), Year of construction: 2020, x-travel 1.300 mm y-travel 290 mm z-travel 450 mm table-size 1.600x 320 mm table load 0,5 t spindle turning speed range 80-5.000 U/min spindle turning speeds of horiz. head: 60-1.800 U/min spindle taper vertical SK40 spindle taper: hori. SK50 quill stroke 127 mm feeds x/y/z -stepless 0-1.000 mm/min rapid traverse X-axis 5 m/min total power requirement 10 kW weight of the machine ca. 2,7 t dimensions of the machine ca. LBH 1,9 x 2,1 x 2,5 m -Swiveling milling head with quill feed; -Horizontal spindle with independent drive; -Pneumatic tool clamping system; -3-axis position display; -Electronic handwheels; -Pneumatic tool clamping; -Coolant system; -Work light; Blsdps Ahzi Nsfx Aknsp -Chip tray; -Manual central lubrication; -Hydraulic machine vise; -Various tool holders; -Various horizontal tool holders; -Collet set in a case; -Outboard support (counter-bearing) for horizontal milling

Condition: used, Year of construction: 2015, travel -x axis 620 mm Bodps Ahzi Ejfx Aknjlp travel -y axis 520 mm travel -z axis 420 mm control HEIDENHAIN - TNC 620 number of spindle speeds 12.000 NC rotary indexing table Ø 650 mm table: swivelling -90 / +110 Grad table load 300 kg numbers of positions in the tool changer 32 tool taper SK40 5-axis simultaneous machining center | SPINNER - U5 - 620 equipped with ITC, NC swivel rotary table, tool changer & chip conveyor. The machine is in a well-maintained condition and can be inspected at any time under power. Please refer to the offer for further technical details. Documentation is available! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: U5 620 | U5-620

Condition: good (used), Year of construction: 2009, pressure 120 t chamfer lenght 3110 mm distance between columns 2600 mm column arm 410 mm ajustment speed 160 mm/sec working feed 10.0 mm/sec return speed 130 mm/sec back stop - adjustable max. 750 mm stroke 260 mm dayligth 460 mm table height 880 mm oil volume ca. 140 ltr. operating pressure max. 240 bar control STEP PX 13+ total power requirement 11.0 kW weight of the machine ca. 8400 kg. range L-W-H 4250 x 2000 x 2800 mm Equipped with a brand-new CNC control system Retrofitted in November 2026 Retrofit costs approx. 10.000 Euros (!) Features: - CNC electro-hydraulic press brake - Includes a brand-new "STEP PX 13+" control unit * Touchscreen operator panel * Direct on-screen drawing via 2D editor * Precise control of all axes * Bending sequence simulation * Automatic angle calculation * Material/tool ??library * Swiveling control panel (positioned at the front left) - CNC-controlled axes: Y1 + Y2 + X + R + CNC crowning - CNC-motorized backgauge (X-axis) * Includes 2x manually adjustable backgauge fingers - CNC-motorized height adjustment for the backgauge (R-axis) - CNC-motorized table crowning system - AMADA-style upper tool adapter (quick-change clamping) * Includes a crowning mechanism integrated into the tool holder * 1x set of segmented upper tools - AMADA-style lower tool holder * Includes a segmented 4-V die set - 2x front-mounted, adjustable support arms ("sliding" system) - Lateral safety guards (hinged doors) - Rear safety guard (sliding door) - 1x mobile 2-hand/foot control unit Blodps Ahzitsfx Aknjp - Operating manual (PDF)

Condition: excellent (used), Year of construction: 2016, sheet width 2520 mm plate thickness 4.0 mm ST thickness at "Niro-steel" 2.0 mm upper clamping bar adjustment 350 mm adjustment speed 65.0 mm/sec Adjustment folding beam 80.0 mm Bending speed 66.0 Grad/sec control NANO Touch compressed air 6.0 bar total power requirement 7.4 kW voltage 400 V weight 4870 kg range L-W-H 4314 x 2400 x 2200 mm Current new price ~ 90.000 euros from a maintenance workshop very well-equipped (!!) Features: - CNC-controlled, electromechanical universal folding machine * ??High-precision mechanics combined with modern control technology * Suitable for both single-part and series production * Robust, high-speed machine with fast axis movement * Torsion-resistant welded construction * Specifically designed for precise processing of thin . and medium-gauge sheet metal - SCHRÖDER "NANO Touch" CNC control system * User-friendly operation * Storage capacity for up to 9,999 bending programs Bjdpo Ahzipofx Aknolp * Bending angles and positioning dimensions can be entered line by line * ??Swiveling control panel (mounted at the front right) - CNC-controlled, electromechanical backgauge * Positioning speed: 300 mm/sec * Includes rear sheet support surface (stainless steel) * Equipped with ball transfer units - Manual adjustment of the bottom beam - 1x mobile dual footswitch - Operating manual (PDF) * Special accessories included: - 1x set of segmented upper tools (height: 130 mm) - 1x bending rail (width: 25.0 mm)