Used crushing units for sale (126)

Condition: used, Year of construction: 2009, Manufacturer: H&G Model: HG/SV 11 Weight: 1800 kg Chjdex Hyfyopfx Agrsd Engine power: 11 kW

Condition: good (used), Year of construction: 2014, functionality: fully functional, Roll slitter type RGS50 - used Condition: good For slitting and shredding wound paper, cardboard, or plastic rolls onto a cardboard core - Motor power: 15 kW / double pump, 32 amps / 5-pole – 50 Hz, 3-phase - Control: PLC-supported, with two-hand safety circuit - Cutting force: 2 x 25 tons Chodoyn Aghepfx Agrsd - Blade length: 2500 mm - Max. opening: 1600 mm With roll loading stand for increased work height and single-sided roll discharge - roll discharge height approx. 1200 mm Machine has been factory-tested and partially overhauled, ready for immediate use.

Condition: used, Year of construction: 1985, functionality: fully functional, overall weight: 6,200 kg, power: 30 kW (40.79 HP), The machine has seen little use and is still in very good condition! Chodpfx Agezc Htbjrod

Condition: as good as new (ex-display), Year of construction: 2024, Special price: €29,970 net One machine is currently available for immediate delivery. This machine is ideal for shredding bulky, lightweight aluminum chips or turning chips. Not suitable for heavier aluminum parts. Included: + Optimized cutting geometry + Adapted slide control + Load-dependent controlled hydraulic slide (which presses the chips against the cutting mechanism) Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Knives: 40x40mm, multi-rotatable Rotor diameter: 260 mm Control: Omron PLC Cutting mechanism opening: 600 x 800 mm Hopper volume: approx. 0.6 m³ Hydraulically actuated slide Screen size selectable (15 - 40mm) Suction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (l x w x h) approx. 1737 x 1167 x 1650 mm The following options are available at an extra cost: - Raise the shredder by 30 cm (preparation for conveyor belt) + €2,990 net - Inclined conveyor belt (discharge height approx. 220 cm) + €9,770 net - Overband magnet + €6,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) Cjdogmh H Tspfx Agrohd We would be happy to provide a free test with your material. We invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material via a freight forwarder, and we will document the test with photos and videos.

Condition: refurbished (used), Year of construction: 1988, TECHNICAL DATA: Jaw opening 200 x 620 mm Year of manufacture 1988 Throughput capacity - 80 t/h Feed material size 4-70 mm Weight 6081 kg Chedpfx Ajzc H Raegrsd Power requirement 90 - 132 kW Special features: Adjustable grinding plates Condition: Refurbished, wear parts replaced, sandblasted, primed, and painted Optional and upon request: Infeed hopper, discharge hopper, motor, frame, V-belt, belt guard, control cabinet with soft starter or frequency inverter, special paint finishes, hydraulic opening mechanism

Condition: good (used), functionality: fully functional, total height: 980 mm, total width: 580 mm, total length: 610 mm, overall weight: 116 kg, opening width: 165 mm, power: 1.9 kW (2.58 HP), Equipment: documentation/manual, Intimus FlashEx Media Destroyer. For destroying SSD drives, smartphones, tablets, and USB sticks. Voltage: 120V (60 Hz). Comes with manual. Csdpov D Hchefx Agrehd

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, power: 132 kW (179.47 HP), Price available upon request. Cjdpfx Agozc E Hyjrjhd The machine is in operational condition.

Condition: ready for operation (used), Manufacturer: H&G Model: HG/SV 11 Weight: 1800 kg Codpszp Ilqofx Agrshd Engine power: 11 kW

Condition: used, Year of construction: 2021, functionality: fully functional, total height: 2,320 mm, total width: 1,600 mm, total length: 1,600 mm, power: 15 kW (20.39 HP), SPYRA chip crusher / shredder - For reducing the size of chips containing tramp material - Warranty available upon request! Chsdpow N Rv Tefx Agrjd - Fully operational and ready for immediate use - Tramp materials in the chips are no issue for this machine; it has been specifically engineered and patented for this application. Throughput capacity: 0.6 - 1.2 m³ / hour Actual throughput depends on chip type, characteristics, and the quantity of tramp material.

Condition: like new (used), Year of construction: 2019, functionality: unexamined, machine/vehicle number: J-45-1.5, total height: 104 mm, total width: 69 mm, total length: 79 mm, input voltage: 220 V, Unused Allegheny Shredder for “high capacity, built for heavier use” Csdpfxownbr Rs Agrehd Model: J-45-1.5 Manufacturer: Allegheny Paper Shredders Corporation Year of manufacture: 2019 Dimensions: 79cm x 69cm x 104 cm (LxWxH) Shredder motor: 1.5 hp

Condition: excellent (used), Year of construction: 2005, operating hours: 7,480 h, functionality: fully functional, overall weight: 33,500 kg, fuel type: diesel, Terex Pegson Trakpactor 428 on tracks 2005 year 7480 genuine working hours on John Deere CAT C9 33500 kg Inlet[mm]:up to 1067x711 mm Max size of inlet materiał: 400 mm CSS[mm]: 0-20 to 0-100 mm Capacity[t/h]: from 100 to 200 Feed hopper 3,68 m3 Fitted with overband magnet Side conveyor can be bought. Chsdpfx Agsyazl Hsrsd Wear plates 90% blow bars martensitic-ceramic Machine in great working condition, can go straigt to work

Condition: good (used), Year of construction: 2010, • Brand: Erdwich • Type: M700/1-900 • Year of construction: 2010 • Machinenumber: 2036 • Engine power: 22,0 kW • Single axle • Hydraulic slide Chodpfx Aovmzkxjgrod The shredder has been completely serviced at our workshop and fitted with a new sieve bedholder. We currently have 2 sizes of sieves in stock. These sieves are suitable for reducing paper to 20 or 25 mm.

Condition: new, Year of construction: 2026, functionality: fully functional, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE • Model: FABO HY-600 • Type: Double Helix Screw Washer • Capacity: 60 ton per hour • Dimension: 1400 x 6650x1800 mm • Screw Size: Ø 600x6000 mm • Speed: 22 rev/min • Motor: 2 x 5.5 kW Heavy duty Gamak • Water Consumption: 55-205 m3 • Including chassis, motor and safety guards. Cedpfx Ao Ahybmegrshd FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: ready for operation (used), machine/vehicle number: 95 202 74, This listing includes a fully operational, complete DELO DELOLUX UV curing system, consisting of: DELOLUX pilot A4T control & power supply unit 2× DELOLUX 20/400 A2 LED area lamps (400 nm) Mounting brackets, integrated cooling, and all original high-quality cabling DELO is one of the world’s leading manufacturers of industrial UV curing systems used in electronics, optics, medical device assembly, precision bonding, and automated production lines. This system provides extremely high-intensity, uniform UV illumination over a large area, perfect for high-speed adhesive curing and automated processes requiring absolute stability and repeatability.  Included Components 1) DELOLUX pilot A4T Control & Power Unit Model: A4T Input Voltage: 100–240 V AC, 50/60 Hz Power Consumption: 1.45 kW Fuse: T16 A / 250 V User Interface: Large touchscreen display (Login, Admin/User profiles) Control Ports: PLC 1–4 (digital control inputs) Function: Central control, monitoring, and power delivery for LED heads 2) Two LED Heads – DELOLUX 20/400 A2 Wavelength: 400 nm Cooling: Air-cooled Illumination Area: 112 × 112 mm Perfect uniformity for industrial curing processes Both heads include mounting brackets + 280 cm cable each Technical Specifications UV LED Heads (each): Model: DELOLUX 20/400 A2 Wavelength: 400 nm Cooling: Air-cooled Illumination area: 112 mm × 112 mm Serial Numbers: included on the labels Cable length: 280 cm Control Unit (A4T): Model: DELOLUX pilot A4T Input: 100–240 V AC Power: 1.45 kW Fuse: T16A Port outputs: Up to 4 LED heads Power cable length: 180 cm Condition Fully working, tested with both LED heads Bright output, even intensity Cosmetically excellent No damage to connectors, filters, or LED arrays Perfect for: Industrial adhesive curing, electronics production, display manufacturing, PCB assembly, medical device fabrication, optical bonding, and automated UV curing stations. Cable Lengths (included): Power cable (A4T): 180 cm LED head cables: 280 cm each Chedpfx Aex Emqgjgrod Thank you for considering our surplus machining and electrical items for purchase. These items have been in our company's stock for several years, but they are in functional condition. Due to the length of time they've been in storage, some of the items may show signs of aging or wear on the packaging, but the contents are in excellent condition. We want to be transparent about the condition of these items, so please note that the packaging may be slightly damaged, discolored, or have markings from storage. However, this does not affect the functionality of the items inside. We have inspected all of the items and can confirm that they are in functional condition. We will take great care in packaging and shipping your order to ensure that it arrives in the same condition as it was when it left our facility. If you have any questions about these items, please don't hesitate to contact us. Thank you for your interest!

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, opening width: 650 mm, power: 36.77 kW (49.99 HP), broyeur à lames . 2 lames fixes / 5 lames mobiles moteur 37kw largeur utile 700 - rotor plein grille 12 mm (possibilité de changer la maille) Cjdpfeq R Sqlsx Agrshd sortie par ventilation ou visse

Condition: used, Year of construction: 2024, operating hours: 30 h, total height: 5,380 mm, total width: 4,170 mm, total length: 5,250 mm, RECU UZ 2000 Universal Shredder in open design. Manufacturer: Recuperma Model: RECU UZ 20000 Particularly suitable for gentle and rapid composite material breakdown. Disintegration, separation of composite materials, and volume reduction. Csdpfxev U Ttbe Agrehd Operating principle: - Use of flexible impact elements - Size reduction through impact effect of the input material - Crushing to various particle sizes Throughput: Hourly capacity depends on the particle size and bulk density of the material to be processed. Technical data (+/- 5%): Drive power: 250 kW approx. 1490 rpm Drive type: belt drive Auxiliary drive: hydraulic unit approx. 1.5 kW Control: SIEMENS Frequency converter: SEW brand Drum diameter: 1900 mm Weight: 25 tons Wear plate lining HB450 Material loading via hopper Chain curtain as protection against ejection of parts Material discharge via sliding door Currently, the machine is defective. The price refers to the repaired machine. Unrepaired price: €370,000. Transport not included.

Condition: new, Year of construction: 2026, functionality: fully functional, total height: 2,000 mm, total width: 1,100 mm, total length: 1,900 mm, overall weight: 980 kg, rotor diameter: 260 mm, type of input current: three-phase, rotor length: 600 mm, sieve perforation: 10 mm, input voltage: 380 V, The PC-800,PC-600 and PC-400 Plastic Crusher is a heavy-duty rotor knife granulator designed for efficient recycling of thermoplastic waste and production scrap. Built for continuous industrial operation, it delivers high performance while producing uniform plastic regrind suitable for immediate reuse in the manufacturing process. The crusher is capable of processing a wide range of materials, including LDPE, HDPE, PVC, PP, PET, PS, PA (Nylon), engineering plastics, rubber waste, and non-abrasive thermosetting materials Technical Specifications Model: PC-600 • Rotor diameter: 260 mm • Rotor knives: 18 moving knives • Stationary knives: 4 knives • Capacity: 100–250 kg/h • Motor power: 15 kW • Power supply: 380 V, 3-phase, 50 Hz • Feed opening: 320 × 620 mm • Screen hole size: 10 mm • Rotor speed: 885 rpm Csdpfxozvmy Te Agrjhd • Maximum material wall thickness: up to 10 mm • Machine dimensions (L × W × H): 1900 × 1100 × 2000 mm

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, machine/vehicle number: WKZ45-1030, CLEARANCE SALE, STOCK MACHINE! We invite you to visit our technical center to experience the quality and functionality for yourself. Material Shredder 45KW Hopper opening: 1,030 x 1,235 mm Rotor diameter: 360 mm Star-delta start, automatic shut-off during idle - Hydraulic pusher equipped with pressure plates - Siemens PLC control - Optionally with control cabinet extension for discharge conveyor belt and overband magnetic separator Complete solution with discharge conveyor belt in any configuration. Our core competence lies in delivering exactly what the customer truly needs. Csdpfov Tdq Iex Agrehd We work together with our customers to develop customized, individual solutions and supply corresponding systems from our own production. Please feel free to contact us by phone to find the right solution for your application. Conveyor belt, conveyor system, discharge belts, belt conveyors, magnetic separators, overband magnetic separators, recycling, wood chips, plastics, metal-free, metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grids, magnetic grate, metal separator, block magnet, filter systems All prices are net prices plus 19% VAT All information provided without guarantee, while stocks last!

Condition: excellent (used), Year of construction: 2015, Granulator / Knife mill brand INAN TECH Model: IM38/100 Rotor length: 1000 mm Rotor diameter: 380 mm Automatic waste feeding Chjdpfoxgfqfjx Agrsd

Condition: new, Year of construction: 2026, total height: 3,100 mm, total width: 1,600 mm, total length: 1,700 mm, overall weight: 2,500 kg, PC800 Plastic Crusher The PC800 industrial plastic crusher is designed for size reduction of HDPE, LDPE and PP film waste. It can be used as a standalone machine or integrated into plastic washing and recycling lines. Crushing can be performed with water supplied directly into the crushing chamber, allowing the material to be crushed and pre-washed at the same time. The bearing units are located outside the crushing chamber, protecting the bearings from direct contact with water and allowing the crusher to be used for wet crushing applications. Hydraulic Hopper Opening System: The crusher is equipped with a hydraulic power unit and two hydraulic cylinders for lifting and lowering the feed hopper, providing convenient access to the crushing chamber for cleaning, maintenance and knife replacement. Material Feeding Conveyor: The crusher is equipped with a belt conveyor for feeding material directly into the feed hopper, providing continuous and convenient material loading Crushed Material Collection Hopper: The system is equipped with an 800-liter collection hopper for crushed material, mounted on a robust steel support frame Technical Specifications • Capacity: 250–500 kg/h depending on the material • Main Motor Power: 37 kW • Hydraulic System: Hydraulic power unit with 2 cylinders for lifting and lowering the feed hopper • Hydraulic Power Unit Motor: 1.5 kW • Cyclon power: 5.5 kW • Rotor Diameter: 500 mm • Rotor width: 800 mm • Crushing room dimension: 620 × 840 mm • Rotating Knives: 10 pcs • Fixed Knives: 4 pcs • Knife Material: SKD11 • Water Inlet Diameter: 25 mm • Screens Included: 28 mm • Machine Material: S235 steel • Crusher Body Thickness: 25 mm • Dimensions (L × W × H): 1700 × 1600 × 3100 mm Codoz I Tb Sepfx Agrshd • Crushing Type: Dry or wet crushing with water supply • Material Feeding: Belt conveyor • Conveyor Motor Power: 1.5 kW • Conveyor Length: 4000 mm • Belt Width: 600 mm • Conveyor Capacity: up to 800 kg/h • Speed Control: Manual • Conveyor Height: Adjustable • Belt Material: PVC • Total weight: 2500 kg • Collection Hopper Capacity: 800 L stainless steel • Application: Collection of crushed material • Support Structure: Steel frame Applications: HDPE, LDPE and PP film, packaging film and other flexible plastic waste

Condition: excellent (used), Year of construction: 1997, Single shaft shredder form Weima Model -WL6S Cjdpfx Aeivpttjgrjhd Main motor -22kw

Condition: like new (used), We offer a comprehensive spare parts package for the machine types Doppstadt DW 3060 and Doppstadt AK 430/435/560. These are new and as-new parts! Please request our list! Do you have a problem with your bevel helical or planetary gearbox? We offer qualified repair service, spare parts, and new gearboxes! We will accept your defective gearbox as part exchange after inspection! Please send us your enquiry! Chedoqx Ur Djpfx Agrjd

Condition: new, Year of construction: 2026, functionality: fully functional, TECHNICAL SPECIFICATIONS: -Production Capacity: 150-200 Tons Per Hour -Crusher Type & Size: Turbo Impact Crusher – 1200x1000mm -Maximum Feeding Size: 600mm -Total Motor Power: 220 kW MIC-100 is a combination of: • Bunker • Vibrating Grizzly Feeder(Bypass) • Turbo Impact Crusher • Folding type bypass and stock conveyor belts • Hydraulic feet • Mobile Chassis with axles and tires • Fully Automation System • Easy walking platforms for maintenance • Diesel Generator (Optional) *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE Chsdpfs Afnhzsx Agrjd FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, Year of construction: 2026, functionality: fully functional, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FABO MTK Series are mobile type & closed circuit crushing and screening plant known as also sand making machine that is used for high percentage of cubical shape sand production purpose by processing soft and medium hard materials such as limestone, gypsum etc. MTK Series includes one stage of crushing process that is made by a tertiary impact crusher which is capable to produce high percentage of sand with good cubical shape. TECHNICAL SPECIFICATIONS: -Bunker: 10 m3 -Plant Dimensions: 17000x4500x3900 mm -Production Capacity: 200-300 Tons Per Hour -Crusher Type & Rotor Size: Tertiary Impact Crusher – 1200x1300 mm -Maximum Feeding Size: 120 mm -Vibrating Screen Size and Deck: 2000x5000 mm 3 decks -Total Motor Power: 365 Kw -Generator (optional): 500 kvA MTK-130 IS A COMBINATION OF: • Hopper • Vibrating Feeder • Tertiary Impact Crusher • High Stroke Type Vibrating Screen • Folding type feeding, feedback, bypass and stock conveyor belts Chsdpfj Agvwtox Agrod • Hydraulic feet • Mobile Chassis with axles and tires • Fully Automation System • Dust Suppression System • Easy walking platforms for maintenance • Diesel Generator (Optional) FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: excellent (used), For sale: Retsch BB300 Jaw Crusher (Manganese) The machine is fully operational and in EXCELLENT technical and visual condition – only occasionally used. Application: Crushing of medium-hard, hard, and tough materials with hardness up to 10 on the Mohs scale. - Gap width (mm): 1-40 - Feed grain size (mm): < 150 - Final grain size (mm): 5-40 - Sample volume/capacity: up to 600 kg/h - Motor power (kW): 3.0 - Crushing jaws made of manganese steel Csdpfx Ajxckcrjgrehd