Conveyor belt

4.000 mm 160 mm breit

Condition: good (used), Year of construction: 2022, operating hours: 2,806 h, functionality: fully functional, Equipment: Basic Package Inventhor Type 6 Load-sensing system Fuel tank 500 liters Longitudinal conveyor: length 2,900 mm, width 800 mm Centrally arranged lubrication strips 24V electronic control – additional electric pump to operate the following functions when the engine is off: "raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper" Complete radio remote control Large side GRP maintenance doors Maintenance-friendly engine compartment LED lighting package: engine compartment and rear Hydraulically reversible fan Crodpfx Aswnfwqjmajf Three-sided loading protection Folding hopper Fire extinguisher Service ladder Toolbox Acoustic start-up warning Doppstadt telematics system Paintwork: RAL2011 deep orange Special Equipment: Powertrain 310 kW - EV 3-axle drawbar trailer chassis unit Shredding system Size L 600/4 - 30 Z Additional hydraulic connections 35 - 80 l/min Hydraulic drive Rear conveyor 4.9 m Overband magnet neodymium Frame for overband magnet

Year of construction: 2010, condition: good (used), USED CNC BIESSE BREMA EKO 902 INSERTING MACHINE TECHNICAL DETAILS: 3-AXIS (X-Y-Z) CNC MACHINING CENTER Crsdohknbrspfx Amaef - Complete protection of the machining head and the work area on the machine. - Numerical control system with BIESSE Works software on Windows. - Vertical positioning of the panels, with 2 panel clamping jaws. - Panel feed (in the direction of the X-axis, on the lower support with rubber wheels), movement (in the X-axis) of the panel/board clamping jaws. PANEL DIMENSIONS (WORKING DIMENSIONS): - Minimum length: 160 mm / Maximum length: 3200 mm - Minimum width: 35 mm / Maximum width: 900 mm - Minimum thickness: 8 mm / Maximum thickness: 80 mm WORKING GROUPS: - No. 1 Vertical spindle (electro-spindle) ER32 (4.5 kW) with inverter (up to 18000 RPM) - No. 1 Circular saw (for grooves) diameter 120 mm (X-axis fixed) - No. 13 Independent vertical spindles for drilling (6 on the X-axis + 7 on the Y-axis) - No. 8 Independent horizontal spindles for drilling (3+3 on the X-axis and 1+1 on the Y-axis) - No. 1 Head group for hinge drilling - Total installed power: 20 kW AUTOMATIC DOWEL INSERTING GROUP ON BOTH SIDES WITH A PRESSURE PUMP FOR APPLYING THE GLUE.

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 2,450 mm, total height: 1,790 mm, total length: 3,470 mm, Oy Foudila Ab is a company, in Kaskinen, Finland with over 45 years of experience in equipment for timber handling. For the past 15 years, we have also been active in pallet industry and have developed a lot of machines over the years for nailing, automatic timber feeding and stacking. We manufacture both standard machines and customized solutions for the customer's purposes. Foudila deck nailing machine, DNM-153 is a compact, flexible, and efficient machinery for production of decks for pallet industry to an excellent price-performance ratio. Thanks to the machine’s high production speed, user-friendly design and board magazines with large buffer, it is well suited for manufacturing both standard and special products in small and large production series with only one operator. The machine is capable of producing over 1000 decks per work shift. The machine is equipped with three nailers with magazines for large nail coils. Each nailing pattern can include 1–3 nails and can also be clinched if needed. The boards are fed into magazines with a large buffer – three cassettes for stringer/under boards and one cassette for deck/upper boards. The machine is controlled and programmed via a modern and user-friendly software interface on a 10” touchscreen, using a Beckhoff control system. Thanks to the machine’s compact design, it requires a very small production footprint and makes installation fast and easy because the machine can be delivered fully assembled. Credpeyl Tr Nofx Amasf The machine can of course be equipped with a conveyor for finished products, automatic stacker and automatic board feeder. These options can also be installed at a later stage, allowing for investment step-by-step. Please feel free to contact us for more information, technical specifications, and price details.

Year of construction: 2012, condition: excellent (used), WEINIG window production line consists of: Unirex 3000 machining center Univar 15 Cedpfx Amjh H Iyxjaorf Unitex 15

Condition: new, working length 2451 mm Working width 2170 mm Working height 800-1000 mm Haberkorn return conveyor approx. 2,451 mm x 2,170 mm ----- base frame - Steel tube frame 50 x 50 x 2 mm - Height-adjustable trestles (approx. 800mm - 1000mm) - Conveyor system for wood lengths from 300mm to 4200mm - Conveyor system for wood widths up to 240mm Roller conveyor - infeed - Continuously driven roller conveyor approx. 5 - 25m/min - Drive via gear motor 0.37kW, vertical shaft and PU round belt - Roll diameter 50mm, 240mm roll jacket length with PVC jacket - Transfer to cross conveyor by lifting - lowering the roller conveyor - Roller cover according to HBG cross conveyor - Cross conveyor with 6 traverses - Conveyor belts PVC coated (green) 50mm wide, guided in plastic tracks - Continuously driven cross conveyor approx. 5 - 20m/min - Drive via geared motor 0.37kW - Approximately 1750mm lock to lock Roller conveyor - outlet - Continuously driven roller conveyor approx. 5 - 25m/min - Drive via gear motor 0.37kW, vertical shaft and PU round belt - Roll diameter 50mm, 240mm roll jacket length with PVC jacket - Transfer to cross conveyor by lifting - lowering the roller conveyor - Roller cover according to HBG ----- Conveyor belt approx. 320mm x 3500mm base frame - Steel tube frame 50 x 50 x 2 mm - Height-adjustable trestles (approx. 800mm - 1000mm) - Conveyor belt for wood lengths from 300mm to 4200mm - Conveyor belt for timber widths up to 240mm - Conveyor belt on castors with brake tape - Continuously driven approx. 5 - 25m/min - Drive via geared motor 0.37kW - Tape PVC coated 260mm wide - Stop on both sides approx. 15mm ----- Steering: Codpfsi Hmpijx Amaerf - Ready to plug in with its own controller and logic - Siemens PLC, 24VDC - Siemens frequency converter - Optical limit switches and emergency stop loop - Ready installed with 16A Euro plug - Connection: 400V AC, 2kW, 50Hz ----- Pneumatic: 6-8 bar, consumption approx. 16NL/min Colour: RAL 7035 light grey Basic EC Directive 2006/42/EC in accordance with 2006/95/EG Electrical Equipment (Low Voltage Directive) and 2004/108/EC EMC Directive ----- Price of the above version ex works: on request! plus packaging and transport costs ----- (Technical information according to the manufacturer without guarantee!)

Condition: new, Year of construction: 2025, functionality: fully functional, ACTION M frame press Press for any kind of window system: windows, slatted shutters, shutters and solid wood doors. Max working dimensions L x H 3500x2500 mm Min working dimensions L x H 250x375 mm Max vertical/horizontal thrust 7,4/2 ton Working height 480/1050 mm Hydraulic pump power 2.1 kW MACHINE COMPOSITION: ACTION M ACTION M FRAME PRESS num 1 109831 Normative CE per SM 1 R00494 action m 35-25 1 930731 Volt 400 EU 1 Crsdpfx Ajwh T Dlemaef 931201 Frequency 50 Hz 1 530074 PVC-coated beams working surfaces 1 530075 Intermediate manual crossbeam complete of piston and counter-stop 1 530076 Hydraulic system for low pressure working 1 530077 Equipment for trapezoidal products with oscillating head to adapt to the different corners of the windows system 1

Condition: used, Year of construction: 2008, functionality: fully functional, Platform nailer. Crjdpfxoxt Ikbj Amasf And for 2-way entry pallets without bottom boards. Automatic loaders

Condition: good (used), Used Kölle tilting spindle milling machine Csdov N Dcpspfx Amajrf Model F 45 Table size 1070 x 1000 mm Table height 850 mm Motor 5.5 HP / 400 V Right/left rotation Speed 2800/4500/6000/10000 rpm Spindle Ø 30 + 40 mm, Spindle stroke 110 mm Electric height and tilt adjustment Swivel range -5 to +45 degrees Electric motor brake Aigner integral stop 650/650 mm Milling stop rotatable 360° Weight approx. 1050 kg

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 1,000 mm, total height: 1,900 mm, total length: 9,000 mm, Oy Foudila Ab is a company based in Kaskinen, Finland, with over 45 years of experience in wood handling. For the past 15 years, we have also been active in the pallet industry and, over the years, have developed numerous machines for nailing, automatic timber conveyance, and stacking. We manufacture both standard machines and customized solutions tailored to our customers’ needs. The LNM3500 is a flexible, compact, and efficient pneumatic nailing machine for the production of pallet legs. The user-friendly interface allows fast changeovers, and the machine can store settings for over 100 different leg types. It is equipped with three Bostitch nail guns featuring magazines for jumbo coils and indicators. Production of legs with 2 to 30 blocks per leg is possible. The machine is fitted with a large board magazine. A protective cover ensures noise reduction and operational safety. The system is operated via a 10-inch touchscreen and uses Beckhoff control technology. The machine can be outfitted with an optimized block cutter and automatic block feeder for integration with the nailing unit. The block cutter can be mounted either at the rear or on the side of the nailing machine. Cjdpfxoy Izahs Amasrf Standard machine dimensions: - Boards: Length 600–3500 mm, Width 60–125 mm, Height 16–28 mm - Blocks: Length 60–150 mm, Width 60–125 mm, Height 50–100 mm Capacity: - 21 blocks/min Machine dimensions (without block cutter): - Length 9000 mm, Width 1000 mm, Height 1900 mm The machine is CE certified. The leg nailing machine can also be equipped with an automatic stacker for finished legs. Please do not hesitate to contact us for further information, images, or videos.

Condition: good (used), Code: 0320 Brand: SAC SUERI - ITALY Model: T 4 - CE Standard Electronic tenoning machine for wooden frames, doors, cabinet doors, furniture, and various - CE Standard Technical data: End trimming saw with continuous axis positioning - Horizontal stroke 130 mm - Motor power 3,2 Kw - Blade diameter 400 mm Hole 30 Tenoning spindle - Spindle length 320 mm - Spindle diameter 50 mm - Motor power 5,5 Kw - Continuous axis positioning - Max tool diameter 350 mm Tenoning carriage table size 750 x 900 mm - Motor power 1,1 Kw - Working speed 3/10 mt/min - Positioning speed 30 mt/min - Tilting guide - Guide with stop and display Codpfxjytg R Io Amaorf Min workpiece height 30 mm Max workpiece height 90 mm Min workpiece width 30 mm Max workpiece width 600 mm Min/max workpiece length 200/3000 mm Max tenoning depth 130 mm Max squaring width 1000 mm Electronic control of all machine functions - Alphanumeric keyboard - Monitor LCD 9,5"- 800 storable programs - Free programming by the operator - Sequential work programs Suction port diameter mm 100/160 Overall dimensions mm 2250 x 1800 x 2050 h Weight kg 1800