Cutting mills

ZERMA GS 500/800

Condition: ready for operation (used), Number of blades: 6, rotor diameter: 350mm, engine power: 50kW, with construction as steel/welded construction in reinforced design and documentation, an inspection is possible, year of construction unknown, was overhauled in 2022. Rodpfx Adjn Tpmuoajn

Condition: excellent (used), Year of construction: 2016, operating hours: 23,170 h, clamping force: 2,500 kN, screw diameter: 60 mm, injection pressure: 2,005 bar, injection weight: 618 g, mold height (min.): 330 mm, Injection molding machine Krauss Maffei 250-1400CX with robot and gas boost (225) Rodpfxovtzkfs Adaon Product Code: 225 Availability: In Stock Year of production: 2016 Brand: KRAUSS MAFFEI Technical data Shot Weight: 618 g Injection speed: 848 ccm/s Clamping Force: 2,500 kN Screw dia: 60 mm Injection pressure: 2005 bar Tie bar distance: 630x630 mm Platen size: 1135x1180 mm Mould height min.: 330 mm Total day-light max: 1150 mm Type of controls: MC6 Language: German Power: 70 kW Workinghours: 23170 h Weight: 15000 kg Dimensions: 6,5x2,3x2,3 m Hopper: No Core pull: Yes Euromap: Yes Air valve: Yes Heating channels: Yes Gas bottle: Yes Picker or robot: Yes

Condition: used, machine/vehicle number: 12677, Rotor diameter: 400 mm Rotor width: 600 mm 3-knife rotor 2 rows stator knives Inlet cross section approx. 600 x 660 mm Rsdpfek Tuxdox Adaen Drive motor: 30 kW

Year of construction: 2006, condition: excellent (used), Battenfeld HM 100/525 injection molding machine Year: 2006 Controls: Unilog B4 Technical details Short-circuit force: 1000 kN Size of mold plates (hxv): 680mm x 594mm Distance between columns : 470mm x 420mm Mold opening stroke: 500mm Mold height min: 250mm Maximum clearance : 750 mm Hydraulic ejector - stroke: 150 mm Forward/reverse ejector force: 41.2 kN Injection unit Screw diameter: 40 mm Ls/D ratio: 22 Injection pressure: 2100 bar Injection volume: 251 cm³ Redpfxjk Rnvme Adaon Injection weight , PS: 228.4 g Injection stroke: 200 mm Screw speed: 0 - 318 1/min Max plasticization rate: 30.4 g/sec. Nozzle pressure: 86 kN Electrical and hydraulic equipment Installed heating power: 12.1 kW Adjustable barrel heating zones: 1+3 Pump power 18.5 kW Oil capacity 275 liters Dimensions and weights Total weight of the machine: 4,600 kg Dimensions (L x W x H) 4.3 x 1.5 x 2.0 m

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036946, clamping force: 800 kN, screw diameter: 40 mm, displacement volume: 201 cm³, injection pressure: 1,860 bar, injection weight: 183 g, mold height (min.): 150 mm, ejector force: 22,000 N, ejector stroke: 100 mm, opening stroke: 750 mm, installation height: 400 mm, total length: 4,750 mm, total width: 1,670 mm, total height: 1,850 mm, overall weight: 5,600 kg, heating capacity: 11.5 kW (15.64 HP), drive type: Vollelektrisch, clear span: 735 mm, tool weight: 600,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The basic injection molding machine, precisionMolding, offers the perfect entry-level solution for all-electric injection molding, enabling you to react quickly and innovatively to market requirements. It combines high performance, simple operation and short delivery times. It can be used in a wide range of applications, e.g. in the packaging industry, the electrical and electronics industry, medical technology and the automotive industry. Your benefits: - Optimized price-performance ratio for a wide range of applications - High energy efficiency thanks to all-electric machine concept - Realization of demanding delivery times thanks to basic machine concept with a wide range of options TECHNICAL DATA: KM 80 / 380 PA G01 (order 38670023) CONTROL  MC P1 with 15" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 120  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 610 x 560  Tool installation height min. - max. mm 150 - 400 Redpfx Adjud H Dmjasn  Opening width mm 750  Mold opening stroke max. mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force forwards/backwards kN 22 / 22  Ejector speed forwards/backwards mm/s 300 / 300  Max. Mold weight kg 600 SPRING UNIT  Screw diameter / type mm 40 / standard  Effective Ls/D ratio 20.0  Injection pressure bar 1860  Stroke volume cm³ 201  Shot weight at max. stroke for PS g 183  Injection speed mm/s 200  Injection flow rate cm³/s 251  Screw drive/speed 1/min 334  Plasticizing flow (standard) g/s 24.7  Nozzle contact force kN 34 ELECTRICAL PARAMETERS  Connected load kW 20.6  Installed heat output kW 11.5  Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 5.6  Length x width x height m 4.75 x 1.67 x 1.85 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  Air valve 1 - fold (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Electrical interface cascade 4-fold  Euromap interface handling E18, E63  Euromap interface (central computer) E67, E77  Water battery 4 - compartment  Automatic central lubrication  Adaptive Process Control (APC)  Spray embossing circuit  Graphic analysis package The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: excellent (used), Year of construction: 2015, clamping force: 1,300 kN, Arburg 520S 1300-400 (2015) Clamping force: 130 t Rjdpfxewv Hrxs Adajn Screw diameter: 40 mm (higly wear resistant) Shot weight: 184 g Distance between tie bars V: 520 mm Distance between tie bars H: 520 mm Min/Max mould height: 350mm Opening stroke: 925mm Shot volume: 201 cm3 Type: Horizontal Drive: Hydraulic (Arburg servohydraulics) Hours: 28.000 hours only! \+ Apex Sprue picker robot 4 free cooling circuits Core puller: 1

Condition: used, Year of construction: 2017, clamping force: 250 kN, displacement volume: 570 cm³, injection pressure: 2,470 bar, overall weight: 14,500 kg, load hours: 22,900 h, screw conveyor diameter: 55 mm, terms of delivery: FCA Pegnitz Redoxv D Tkopfx Adaon delivery time: on request terms of payment: 100% prior to delivery

Condition: new, Year of construction: 2025, Injection Moulding Machine – Krauss Maffei KM 300-1400 CX Year of manufacture: 2025 Fully hydraulic clamping system. MC 6 control system based on an industrial computer utilizing real-time Ethernet technology, equipped with a built-in 21.5" operator panel with a full-colour touchscreen. Plasticising unit Complete plasticising unit for thermoplastics, screw diameter 60 mm, with non-return valve and open nozzle Nozzle radius: 15 mm Nozzle orifice: 6 mm Technical data (standard version) Clamping unit Clamping force: 3000 kN Opening force: 169 kN Platen dimensions (H x V): 995 x 1050 mm Tie bar spacing (H x V): 630 x 630 mm Opening stroke: 820 mm Minimum mould height: 330 mm Maximum daylight: 1150 mm Ejector stroke: 200 mm Rodpfx Adjxdd Speaen Ejector force front/back: 58 / 28 kN Injection unit Screw diameter: 60 mm L/D ratio: 20.8 Injection pressure: 2006 bar Injection volume: 679 cm³ Shot weight (PS): 618 g Injection speed: 110 mm/s Injection rate (standard): 311 cm³/s Screw speed (standard): 260 rpm Electro-hydraulic system Pump motor power: 45 kW Installed heating capacity: 22.4 kW Dry cycle time according to Euromap 6: 2.7 s Hydraulic oil tank capacity: 720 l Linear robot – Krauss-Maffei LRX 150 Payload < 15 kg (gripper + drives + parts) Part removal to the operator’s opposite side Axes: X-axis (from mould): 900 mm, servomotor Y-axis (vertical, with motor brake): 750/750 mm, servomotor, telescopic Z-axis (transverse): — Dimensions and weight Net weight (with control cabinet): 13.2 t Machine dimensions (L x W x H): 6.16 x 2.17 x 2.26 m

Year of construction: 2007, condition: ready for operation (used), Clamping force: 1000kN, tie bar spacing: 470mm/420mm, platen dimensions X/Y/Z: 680mm/590mm, opening stroke: 500mm, daylight: 750mm, ejector stroke: 150mm, ejector force: 41.2kN. Screw diameter: 40mm, L/D ratio: 22, injection volume: 251cm³, injection weight: approx. 228g, injection pressure: 2100bar, injection stroke: 200mm. Machine dimensions X/Y/Z: approx. 4300mm/1500mm/2000mm, weight: approx. 4600kg. Documentation available. An on-site inspection is possible. Rodpfxsw Duvbe Adaen

Condition: excellent (used), Year of construction: 2016, operating hours: 28,600 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 55 mm, displacement volume: 570 cm³, Clamping force 2000 kN Mould opening force, max. 101 kN Travel force movable platen opening 50 kN Travel force movable platen closing 42 kN Size of mould platens (h x v) 915 x 915 mm Distance between tie bars (h x v) 560 x 560 mm Mould opening stroke 700 mm Mould height min 550 mm Max. daylight 1250 mm Hydraulic ejector - stroke 200 mm Ejector force 58/28 kN Injection unit: Screw diameter 55 mm Ls/D ratio 23 Injection pressure 2387 bar Stroke volume 570 ccm Shot weight (PS) 519 gr. Injection rate 261 ccm/s Screw speed 260 1/min Plasticising rate max. 49 g/s Nozzle pressure 87 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 45 kW Installed heating capacity 23 kW Adjustable barrel heating zones 6 Reservoir capacity 525 ltr. Dimensions and weights: Dimensions of the machine ca. 6,00 x 2,10 x 2,10 m Total machine weight 11500 kg Max. mould weight 2535 kg Rodpfx Adoxz Tq Neaen Accessories: - Anti vibration pads Additional Options: - Electrical plasticizing motor - Accumulator - 2 x Air valves - 2 x core pulls on movable plate - 1 x core pull on fix plate - 8 x hotrunner controller - Robot interface according to Euromap 67