Glass washing machine

Zafferani Junior SV130

Condition: new, Year of construction: 2025, functionality: fully functional, number of drawers: 16, warranty duration: 12 months, SLIDING RACK FOR GLASS M80-16 MANUFACTURED IN 2025/ BRAND NEW We manufacture sliding racks for glass pane storage (boxes with glass) or other panel materials (metal sheets, quartz sinters, polycarbonates, furniture boards). We design and manufacture our racks from scratch in Poland. The materials which we use for manufacturing hold the proper certificates of durability and they are subject to quality control on a continuous basis. Storage racks consist of sliding and slightly inclined drawers. They save up to 75% of space because all the partitions are parallel and they are separated every 10 millimetres. We also offer various sizes and load-bearing capacities. However, after consultations, we are able to manufacture a storage rack of different parameters, considering your individual conditions and requirements. The inclination of spans depends on assembly – it may be right hand sided or left hand sided. We recommend this storage rack especially to glass production facilities, stoneworks facilities, furniture production facilities and advertising companies, which want to use their space effectively. The racks are delivered for self-assembly in a package. The assembly is very simple and easy owing to our long-term experience which allowed us to create a well-thought product which is attached with the assembly instructions, making the assembly trouble-free. In case of any problems, do not hesitate to contact our technical department. We also provide charged assembly services by our technicians in your location. M80-16 RACK TECHNICAL DATA Intended use – single glass panes 255 cm x 160 cm Maximum pane size - 275 cm x 170 cm Number of partitions -16 The width of the storage strip for glass – 8 cm The length of the storage strip for glass - 308 cm The material on which glass is placed – wooden board 308 cm x 8 cm x 2.5 cm Structure height (A) – 218 cm Structure width (B)- 254 cm Structure depth (C)-318 cm Space needed for the correct use of the rack – 15 m2 Requirements for the ground – smooth/straight The number of the partition guide bearings – 8 pcs. Front wheel – Ø 160 / reinforced polyamide Rear wheel – steel wheel with a bearing / rolled along the profile Colour - RAL 7040 (grey) Anti-corrosion protection – phosphating and powder-coating of steel elements Permissible load-bearing capacity of a single partition – 900 kg Permissible load-bearing capacity of the whole rack – 14 400 kg Partitions inclination – left or right – depending on assembly Assembly time - 10 hours The number of people required for assembly – 2 people DOCUMENTS ATTACHED TO M80-16 RACK - User’s Manual - Assembly Instructions - Rating plate Lajdohbduzjpfx Agrji - 12 months’ warranty We also deliver our racks for glass to the EU countries and other countries.

Condition: new, Year of construction: 2025, functionality: fully functional, number of drawers: 30, SLIDING RACK FOR GLASS M80-30 MANUFACTURED IN 2025/ BRAND NEW We manufacture sliding racks for glass pane storage (boxes with glass) or other panel materials (metal sheets, quartz sinters, polycarbonates, furniture boards). We design and manufacture our racks from scratch in Poland. The materials which we use for manufacturing hold the proper certificates of durability and they are subject to quality control on a continuous basis. Storage racks consist of sliding and slightly inclined drawers. They save up to 75% of space because all the partitions are parallel and they are separated every 10 millimetres. We also offer various sizes and load-bearing capacities. However, after consultations, we are able to manufacture a storage rack of different parameters, considering your individual conditions and requirements. The inclination of spans depends on assembly – it may be right hand sided or left hand sided. We recommend this storage rack especially to glass production facilities, stoneworks facilities, furniture production facilities and advertising companies, which want to use their space effectively. The racks are delivered for self-assembly in a package. The assembly is very simple and easy owing to our long-term experience which allowed us to create a well-thought product which is attached with the assembly instructions, making the assembly trouble-free. In case of any problems, do not hesitate to contact our technical department. We also provide charged assembly services by our technicians in your location. M80-30 RACK TECHNICAL DATA Intended use – single glass panes 255 cm x 160 cm Maximum pane size - 275 cm x 170 cm Ljdsha E S Topfx Agroai Number of partitions -30 The width of the storage strip for glass – 8 cm The length of the storage strip for glass - 308 cm The material on which glass is placed – wooden board 308 cm x 8 cm x 2.5 cm Structure height (A) – 218 cm Structure width (B)- 436 cm Structure depth (C)-318 cm Space needed for the correct use of the rack – 27 m2 Requirements for the ground – smooth/straight The number of the partition guide bearings – 8 pcs. Front wheel – Ø 160 / reinforced polyamide Rear wheel – steel wheel with a bearing / rolled along the profile Colour - RAL 7040 (grey) Anti-corrosion protection – phosphating and powder-coating of steel elements Permissible load-bearing capacity of a single partition – 900 kg Permissible load-bearing capacity of the whole rack – 27000 kg Partitions inclination – left or right – depending on assembly Assembly time - 14 hours The number of people required for assembly – 2 people DOCUMENTS ATTACHED TO M80-30 RACK - User’s Manual - Assembly Instructions - Rating plate - 12 months’ warranty The product is delivered as a whole ready for use. We also deliver our racks for glass to the EU countries and other countries.

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 200300381, total length: 5,220 mm, workpiece weight (max.): 3,000 kg, Glass Washing Machine Bavelloni LV1604-20 Operating direction: right to left Illuminated discharge area for quality control. 3 washing zones, each with its own water tank: - First tank for brush pair No. 1 is electrically heated and filled with detergent/water mixture. - Second tank for brush pair No. 2 contains cold water for rinsing. - Third tank is for washing zone 3, equipped with spray nozzles for rinsing with pure water. A drying zone follows, utilizing air nozzles powered by a fan. The machine is designed for glass heights up to 1600mm but is open at the top, allowing the transport of taller glass panes. Glass thickness: up to max. 20mm Infeed section length: 1400mm; main machine length: 1820mm; outfeed section length: 2000mm. Automatic stop of the feed rollers when the glass reaches the end of the outfeed section. Operating manual, spare parts list, and wiring diagram are available. The machine has been regularly maintained and is operational; it will be dismantled in calendar week 31/32 of 2025. For further details and dimensions, please refer to the photos or feel free to inquire. Demonstration and inspection can be arranged by appointment. Dismantling, loading, and transportation should preferably be organized by the buyer, but can be handled by us upon agreement. A forklift and various assisting tools can be provided. All information and dimensions have been provided to the best of our knowledge and belief, but no guarantee is given for completeness or accuracy! Ljdpovkxzpsfx Agrsai Subject to prior sale. Sold without any warranty or guarantee, as viewed.

Condition: used, mileage: 27,743 km, power: 470 kW (639.02 HP), first registration: 04/1980, overall weight: 32,800 kg, fuel type: diesel, color: green, axle configuration: > 3 axles, gearing type: semi-automatic, total width: 2,750 mm, total height: 3,450 mm, Subject to errors and prior sale! Internal number: 1247. 4300801---- EQUIPMENT * Chassis: Faun LF 40.30 x2/48V 8x8 * Engine type: B/F 8L 413F/W KHD (Deutz) V8 * Engine power: 2x 235 kW at 2,650 rpm * Torque: max. 1,000 Nm at 1,750 rpm * Engine layout: 2 rear engines * Gearbox: 3-speed ZF powershift transmission, electrically switched with brake freewheel, pump drive can be switched on and off under load * Displacement: 12,763 cm³ * Top speed: 95 km/h * Permissible total weight: 32,000 kg * Length: 11,060 mm * Width: 2,750 mm * Height: 3,340 mm Lodpfx Aoh Tvntjgroai * Structure: - Manufacturer: Saval-Kronenburg - Type: KD88F - Structure material: steel lattice tube structure clad with sheet steel - Water tank capacity / material: 8,100 l, polyester - Foam agent tank capacity / material: 900 l, polyester * Pump type: 2-stage centrifugal pump 54/8, via auxiliary drive * Pump output: 5,400 l/min at 8 bar * Foam mixing system: SZM type. Injector type 450, mixing rate: 3 - 8% (infinitely variable) * Roof turret: Type: water-foam swivel pipe type 4000L, electro-hydraulic with synchronous control - Output: up to 4,000 l/min at 10 bar - Throwing distance: approx. 70 m - Turret equipment: partial quantity adjustment 2,000 / 4,000 l, full/spray jet adjustment, infinitely variable * Quick-attack devices: - Type: 2x HD water/foam reels, swivels out 90° - Hose length / DN: 30 m / 32 mm - Jet pipe type: HOENIG 200/480 * Piste foaming system: Type: 3-stage telescopic pipes, extendable - Output: 1,000 l/min at 7 bar - Foaming width: 10 m - Foaming length: approx. 600 m per tank filling * Self-protection system: 1x flat radiator 400 l/min - 2x floor spray nozzle 60 l/min * Power generator 5 KVA * Differential locks * Pump room heating * Equipment room heating * Extension ladder mounted under the structure, removable from the floor * Airfield spotlight 2,000 W * External power supply with breakaway plug for 230 V and much more ----The vehicle is unprocessed! Nationwide delivery possible for an additional charge. Subject to errors and prior sale. We are happy to accept your vehicle as part payment. Financing / leasing also possible without a deposit! Do you have any questions? We are happy to advise you!

Condition: good (used), Completely overhauled by us Glass grinding machine with 9 spindles for grinding and polishing Laodpou Sm H Hsfx Agrei • Year of manufacture: 2014 • Very good condition • Glass thickness: 3 – 25 mm • Minimum glass size: 80 x 80 mm • Machine length: 6470 mm • Machine height: 2610 mm • Machine depth: 1110 mm • Weight: approx. 2800 kg • Price on request

Condition: good (used), Year of construction: 2007, Washing height: 1600 mm. Glass thickness: 1 - 4 mm. 4 washing brushes. Open at the top. Connected loads: 3 x 400 V / 50 Hz, 9.2 kW. Total length: 7880 mm. Depth: 1100 mm. Max. Height: 2300 mm. Fan: Length: 1000 mm, Width: 1000 mm, Laedpfxevi Nfve Agrsi Height: 1600 mm.

Condition: good (used), Year of construction: 2000, Connection value: 430kW Dimension: Lsdpfxoip T T Hs Agroai Total length: 10750mm Width: 3400mm Height: 3900mm

Condition: ready for operation (used), Year of construction: 2022, operating hours: 8,574 h, General Data Machine weight 9200 kg Control Unit Brand SIEMENS Main Drive Laodjxu Rufjpfx Agrji Spindle speed range 5000 Number of axis 5 Movement X-Axis Movement 750 mm Y-Axis Movement 200 mm Z-Axis Movement 1100 mm Workpiece Workpiece drm 400 mm This 5-axis DMG MORI CLX 450 TC was manufactured in 2022, featuring a max. X-axis stroke of 750 mm, Y-axis stroke of 200 mm, and Z-axis stroke of 1,100 mm. It handles a max. workpiece diameter of 400 mm and length of 1,100 mm, with a bar capacity of 65 mm. Spindle speeds reach up to 5000 rpm. Weighs 9200 kg. If you are looking to get high quality turning capabilities consider the DMG MORI CLX 450 TC machine we have for tact us for more information. Application Types Turning

Year of construction: 2016, operating hours: 700 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 88-16-4043, Sigmet 2000V high vacuum coating machine The system overdamps even the most complex 3D molded metal, glass or plastic parts with aluminum while producing an accurate, precise and homogeneous surface with a captivating appearance. Total operating time of the machine: 700h Features: -Double door for high productivity -Precise drive system -Planetary drive for uniform coating -Vertical arrangement of the substrate holders Lsdeuz Rcwopfx Agreai -Modular and flexible design -Glow pre-treatment by AC or DC -Glow pre-treatment by MF (40kHz) Typical applications -automotive industry interior/exterior -Cosmetics -Household and furniture -Glass and bottles -General decoration -lighting

Condition: new, Year of construction: 2025, functionality: fully functional, laser power: 30 W, type of cooling: air, total width: 60 mm, total height: 1,660 mm, total length: 80 mm, overall weight: 80 kg, The universal laser marking system LAS 28 from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes a laptop incl. holder with Windows operating system. Optionally, the laser model LAS 28 can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extensions for marking long parts, can be realized. Made in Germany - Fiber laser 20W (Optional: 30W, 50W) - Wavelength 1064nm - marking field size 150x150mm (optional: 200x200) - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - signal light for indication of operating status - marking software EZCAD (optional additional laser software) - Pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - max. part height approx. 270mm - electrically adjustable Z-axis (adjustment of working plane) - frame made of aluminum profile - connection 230V - air cooled - Laptop with Windows operating system - dimensions: 800x 600 x 1660mm (LxWxH) Lodpounh Hrefx Agroai - weight: approx. 80 Kg