Post-lease machine for cleaning DPF

XTON DPF Master Flash

Condition: new, Year of construction: 2025, DPF MASTER FLASH STANDARD ™ is a compact device for regenerating diesel particulate filters (DPFs) using a hydrodynamic method. It features a 150-liter tank, a pump with a capacity of up to 133 L/min, and a built-in filtration system. The cleaning process operates in an automatic cycle, restoring 99% of the filter's factory parameters. The device comes with adapters that enable the connection of all DPF filters from passenger cars. To enhance the efficiency of the regeneration process, we recommend purchasing the dedicated DPF Heater Pro+ drying system at a promotional price. TECHNICAL DATA: - Weight: 200 kg - External chamber dimensions (cm): 150 x 80 x 131 - Fluid tank: 150 liters - Operating pressure: 3 bar - Power supply: 3 x 400 V - Maximum power: 6 kW - Frequency: 50 Hz - Fluid temperature adjustable between 30°C and 100°C - Pump capacity: up to 133 L/min - Fluid filtration: 5 - 100 microns - Safety features: temperature sensor, fluid level sensor, emergency safety switch Gujdjgllxgopfx Agfsa - Declaration of conformity: CE EQUIPMENT: - Fluid level sensor - Temperature sensor - Programmable temperature regulator - Programmable controller for automatic cycle operation - 150-liter water tank - Water pump with a capacity of up to 133 L/min - Built-in pressure reducer (0-8 bar) - Built-in filtration system - Adapters for DPF filters With the purchase of our machine, you will receive a starter kit to help you start operating at full capacity. The kit includes: - A set of 3 filter cartridges + 3 replacements - XPOWER DPF Cleaner chemical package (2 x 1 L)

Condition: new, GEOMET-2000 flow bench for calibrating a variable nozzle turbocharger without shaft rotation. This flow bench can calibrate the geometry of vacuum, air and electronically controlled turbochargers. The equipment is adapted to the needs of workshops for repairing turbochargers of trucks and cars. It is also designed to work with large-sized or non-standard turbocharger designs; Flowbench GEOMET-2000 will allow a regular workshop to provide professional turbine repair services, thus gaining more customers. HIGHLIGHTS Adjusting the end stop position of the air flow control mechanism (variable geometry) will eliminate the "overblowing" effect, which is detrimental to the engine. Adjusting the length of the actuator rod to adjust the actuation timing of the air flow control mechanism. Evaluating the spring elasticity of the actuator for in-depth diagnostics of vacuum and pneumatic actuators. Checking the operation of the N75 valve for turbines with vacuum valve, which is involved in controlling the turbocharger on the vehicle. Tuning of electronically driven turbos is done by connecting to an external tester ATP-1000. Vertical position of the turbocharger and free working area - comfortable and efficient work with all types of turbochargers. KEY FEATURES • More than 6200 turbo references database • Creation of a test plan for a new turbine from the manufacturer. • All measurements are done in real time. • Calibration of the test bench before starting work • Automatic atmospheric pressure and temperature compensation • N75 valve testing function • Built-in blower pump to create a constant airflow • Self-developed Turbo Test software. • Creation and printing of reports on the tuning process. • Quick turbine installation thanks to magnetic adapters • Self-diagnostics SPECIFICATIONS Maximum productivity of the vacuum pump 180 m3 Required pressure in the pneumatic system 0,6 – 0,8 MPa Power supply 220V, 1Ph, 50Hz Gusdpfx Aon E N E Eegfea Power input 1,5 kW Dimensions 1190 х 520 х 1730 mm Weight 255 kg

Condition: new, Year of construction: 2025, total width: 2,100 mm, total length: 1,260 mm, total height: 2,150 mm, A high-quality device for the regeneration of DPF/FAP/GPF/SCR/EURO 5/EURO 6 filters and catalytic converters. Constructed entirely from stainless steel (AISI 304) and acid-resistant steel (AISI 316), suitable for all types of vehicles. The machine is equipped with a 275-liter tank, a high-pressure pump with a capacity up to 250 l/min, and an integrated filter drying system. The Master Flash technology utilizes the full benefits of the hydrodynamic method, restoring filter efficiency up to 99.9% compared to the new one. It is completely safe for the monolithic structure of DPF filters. Properly adjusted parameters ensure that PM10, PM2.5 particles, soot, carbon deposits, oil, cerium oxides, and heavy metals are thoroughly removed, maintaining the filter's factory characteristics. The pump with chemical sealing and electronics based on components from leading European manufacturers guarantee the highest quality and reliability. The machine is equipped with a filter contamination measurement system (backpressure measurement) and an integrated filter drying system with a temperature range of 70 to 130 degrees Celsius. The filtration system, expanded with a pre-cleaning filter, significantly extends the lifespan of the main filters. Master Flash technology, combined with the unique XPOWER DPF CLEANER chemistry, effectively removes PM10, PM2.5 particles, carbon deposits, oil, cerium, and heavy metals without mechanical interference with the filter structure, restoring its factory performance to 99.9%. TECHNICAL SPECIFICATIONS: Gsdpjgllkajfx Agfeua * Weight: 650 kg * External dimensions (H x W x D): 215 x 210 x 126 cm * Chamber dimensions (H x W x D): 107 x 140 x 89 cm * Tank capacity: 275 l * Operating pressure: 6 - 8 bar (90 - 100 psi) * Voltage: 3 x 400V * Max power: 12 kW * Frequency: 50 Hz * Water inlet connection: 1/2” * Water outlet connection: 6/4” * Air connection: pneumatic quick coupling DN 7.2, plug * Ambient temperature: 5 - 35°C EQUIPMENT: • High-quality components • 7” color touchscreen • Sensors: liquid level, liquid and air temperature, pressure flow, door opening, phase loss, and phase sequence • Filter contamination measurement system • Chamber made of stainless steel AISI 316 • Extended 4-stage liquid filtration system • Two heaters • Integrated drying system with a temperature range from 70 to 130°C • Drying system cooling • Integrated thermal printer for filter parameter printouts • Ethernet controller for remote diagnostics • Set of connection adapters for DPF/FAP/GPF/CAT/SCR filters • EURO5 and EURO6 adapter • Starter kit of consumables (complete set of filters + 2L XPOWER DPF Cleaner detergent) • Extended 12-month manufacturer warranty (optional 24 or 36 months) AVAILABLE IN VARIOUS CONFIGURATIONS - CONTACT US FOR MORE INFORMATION.

Condition: new, Year of construction: 2025, DPF MASTER FLASH PROFESSIONAL™ A professional device for regenerating DPF/FAP/GPF filters and catalytic converters designed for passenger and delivery vehicles. It has a 185-liter tank, a pump with a capacity of up to 133 L/min, and an integrated drying system. The machine's interior is made of stainless steel (AISI 304) and acid-resistant steel (AISI 316). The cleaning technology operates in a closed-loop system using a hydrodynamic method. The device allows for filter contamination measurement both before and after regeneration, with results displayed in mbar. It features an integrated drying system with temperatures up to 100°C. After regeneration, a final backpressure measurement is taken and provided to the client as a printed report. This comprehensive cleaning process can restore the filter’s factory settings up to 99.9%. Components from leading European manufacturers have been used in the machine’s construction, ensuring the highest quality and reliability. TECHNICAL DATA: Gjdegllwispfx Agfsua • Weight 600 kg • External dimension (L x W x H) 210 x 106 x 215 cm • Chamber dimension 140 x 69 x 107 cm • Tank capacity: 185 litres • Operating pressure 6-8bar • Maximum power 10 kW • Water inlet connection 1/2" • Water outlet connection 6/4" • Airflow: up to 390 m3 • Frequency 50 Hz • Hypertension up to 340 mbar • Safety features: temperature sensor, pressure sensor, door opening sensor, emergency safety switch EQUIPMENT: • 7″ color touch screen • sensors: liquid level, liquid and air temperature, pressure flow, door opening, disappearance and phase sequence • protections: emergency safety switch, end protections of the chamber door • filter contamination measuring system • AISI 316 stainless steel chamber • extended 3-stages liquid filtration system • integrated drying system in a smooth temperature range from 70 to 100 ° C • cooling the drying system • integrated thermal printer for printing filter parameters • Ethernet controller for remote diagnostics • set of connection adapters for DPF / FAP / GPF / KAT / SCR filters • starter kit for consumables (a set of filters + 2L XTON DPF Cleaner detergent) • liquid tank with a capacity of up to 185 liters • extended 12-month manufacturer’s warranty (optional 24 or 36 months) ADDITIONAL OPTIONS: • automatic double-sided filter cleaning • a second fluid circuit with an additional pump • thermal insulation of the liquid tank • automatic liquid top-up • automatic dosing of chemicals • quick-X filter mounting system • EURO5 and EURO6 adapter

Condition: used, Year of construction: 2004, pressure 80 t chamfer lenght 2550 mm distance between columns 2050 mm Stroke beam 350 mm max. opening beam/table 620 mm Gjdpfsxyzzaex Agfeua C-recess 420 mm traveldistance X1+X2 cnc programmable 700 mm Z1+Z2 axes controlled by cnc 0-2000 mm max. distance R-axes 200 mm Quick speed,inspeed 100 mm/sec bendingspeed 0-10 mm/sec opening speed 100 mm/sec Number of working hours 24000 h length 3380 mm width 1800 mm height 2750 mm weight 6100 kg total power requirement 9 kW dimensions of the machine ca. 3x2x2,5 m All machines can be viewed under power at all times. Demonstrations of the machines possible at any time.

Condition: used, Year of construction: 1998, Technical details: internal diameter: 63 mm swing diameter: 320 - 800 mm grinding depth: 380 mm total power requirement: ca. 1,1 kW feed:: 0,05 - 0,40 mm/U / 8 step U/min weight approx.: 1060 kg dimension machine xH: 1,1 x 1,1 x 1,4 m Brake Drum Grinding Machine - turning Ø max./min.: 800 / 320mm - brake drum holder: 63mm, quill stroke 120mm Gedpfxsu Ngcio Agfjua - turning support: longitudinal travel 380mm; transverse travel 200mm - steel holder holder: 180 x 140mm, steel holder 58mm, turning tool for insert holder 20 x 20mm - operation via control panel *

Condition: used, mileage: 332,384 km, power: 155 kW (210.74 HP), first registration: 06/2019, fuel type: diesel, axle configuration: 4x2, wheelbase: 4,820 mm, fuel: diesel, brakes: engine braking, gearing type: automatic, emission class: euro6, total length: 8,990 mm, total width: 2,400 mm, permissible axle load (axle 1): 4,400 kg, permissible axle load (axle 2): 8,100 kg, Year of construction: 2019, Equipment: ABS, central locking, cruise control, electric window regulation, power assisted steering, power mirror, tail-lift, traction control, Cab: double Max. front axle load: 4400 kg Max. rear axle load: 8100 kg Number of cylinders: 4 Engine capacity: 5.132 cc Empty weight: 6.965 kg Carrying capacity: 5.025 kg GVW: 11.990 kg Registration number: 87-BNL-5 = Additional options and accessories = - Air horn - Comfort seat with heating - Flashing lights - Strobe lights - Work lights - Heated driver's seat - Heavy duty engine brake - Immobiliser - Outside temperature display - Radio/CD player - Rear air suspension - Spotlights - Suspension seat - Tool box stainless steel - Visor = Remarks = 6 Seat 2x Winch Brille Godpfx Agoybbukofoua Plateau length 575 cm

Condition: like new (used), Year of construction: 2004, AMADA MODEL HFT 8025 80 tons capacity x 2500 bending length hydraulic downstroking press brake complete with CD 2000 4 AXIS colour graphic cnc control, ERWIN SICK machine mounted electronic guards , side and rear interlocked fencing Model Amada HFT 8025 downstoke CNC Press brake Year 2004 Tonnage 100 KN Type CD 2000 CNC Controlled Axis Y1, Y2, X, R Max. Bend Length 2500 mm Open height 470 mm Stroke Length 350 mm Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Oil Capacity Motor Power 7.5kw Weight 6100 kg Bed Length 2500 mm Bed Width 60 mm Open Height 470 mm Throat Depth 420 mm CNC Control Backguage Stoke (X axis) 700 mm/s Max gauge 1000mm R axis 250mm can be demonstrated under power Godpeu A Dgrofx Agfoua BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: new, Year of construction: 2023, arm reach: 1,400 mm, load capacity: 6 kg, New welding robot TIG OKIO AB6-C1400 -Country of origin: China -Type: AB6-C1400 -Number of axes: 6 -Reach: 1400 mm -Maximum payload: 6 kg -Control cabinet -Remote control -Wire feeder -Welding source: TIG WSM400R -Cooler Gedpfx Ageqnt N Dsfjua

Condition: new, range L-W-H 780x480x105 mm weight 79,5 kg 7 St. Tool trolley with 7 drawers. Tool trolley has two normal and two swivel castors with brakes. Tool trolley completely lockable with an integrated lock. Guodpfxou Imhcs Agfsa Drawers can be locked per compartment. All drawers equipped with quick lock and soft-closing mechanism. Tool trolley is equipped with 196 pieces of tool parts: 3 pcs socket wrench sets: 1/4" from 4 - 14mm, 3/8" from 6 - 22mm and Torx from E10 - E20, 1/2" from 8 - 32mm. Various screwdriver sets. Extension for socket wrench sets, various Allen keys from 1 - 10mm, various files. Ratchet ring spanner set from 6 - 22mm, ring spanner set from 6 - 22mm. Pliers range.