Heavy-duty trailers

WMT D30/9,0 x 2,5

Condition: new, Year of construction: 2020, 30000 kg length 9000 mm width 2500 mm height 810 mm lenkbar lenkbar Hodpfszafkmox Agtsnt size of tyres 410 x 250 / 8-fach weight of the machine ca. 4,3 t dimensions 11,5 x 2,5 x 0,81 m Heavy duty trailer with - Double turntable steering - small turning circle - Tilt-proof due to steering lock limitation - Reversible drawbar, Length 1320mm - good condition

Condition: new, Year of construction: 2025, load capacity: 20,000 kg, 20-ton container rotating device, roller stand, complete set 380 V, speed continuously adjustable from 200 to 1000 mm/min. for diameters from 500 mm to 4000 mm roller diameter 300 mm x 140 mm temperature resistance of the support rollers: 100°C Hedpsifgu Uofx Agtent synchronous dual drive AC motor, 380 V, 750 W with hand and foot remote control, complete set

Condition: new, 30000 kg length 9000 mm width 2500 mm height 790 mm lenkbar lenkbar size of tyres 425 x 260 / 2-fach weight of the machine ca. 4,2 t dimensions of the machine ca. 10,9 x 2,5 x 0,8 mm Heavy duty trailer with - Double turntable steering Hodpfx Aofrzv Njgtjnt - small turning circle - Tilt-proof due to steering lock limitation - very robust, therefore low maintenance - Reversible drawbar, Length 1320mm - impregnated wooden support. Would you like other loads and dimensions? Please contact us.

Condition: new, Year of construction: 2025, Protec Welding Turntable, 5000 kg load capacity Hnedsid Szcepfx Agtet Variable speed control, 0.05 - 0.5 RPM Handheld remote control Height: 600 mm Diameter: 1500 mm Foot pedal remote control available at an additional cost.

Year of construction: 2020, condition: as good as new (ex-display), 1x Drive unit with chassis 1x Follow-up unit with chassis and height adjustment - Centric roller support adjustment with hand crank - Manual height adjustment, locking with locking pin - Adjustable height difference: 0-350 mm - Load capacity: 2,500 kg / unit - Component diameter: 200mm – 2,000mm - Running rollers: PUR wheels - Dimensions Length/Width: approx. 1,900mm x 460mm - Chassis track width: 1435mm - Rotation speed: 0 - 2,000 mm/min Hnodpfefxgrdex Agtjt - Operation: Handheld remote control and foot switch

Condition: new, Year of construction: 2024, Protec KT 10000 welding positioner Complete set with hand-held remote control 10,000 kg load capacity Diameter of the clamping plate: 2000 mm Height when tilted: up to 1600 mm to the center Height in horizontal position: 1920 mm Speed: continuously adjustable from 0.01 to approximately 0.35 RPM (higher speeds possible) Tilting angle: up to 120° Hnodpfeid Szvox Agtst Length: 2800 mm Width: 1920 mm Foot pedal remote control available at an additional cost of €390.

Condition: good (used), machine/vehicle number: 5336, carrying power: 6000 kg Hodpsgbt Sqefx Agtent surface plate measures: 1500 x 1500 mm dumping area: horizontal bis - 145 ° turning speed: 0 - ca. 1 Upm electrical connection: 400 V, ca. 5 kW space needed: 2800 x 2350 x 3250 mm weight: 5000 kg

Condition: like new (used), total length: 6,000 mm, total width: 2,500 mm, total height: 1,012 mm, color: blue, Operating conditions: The heavy-duty trailer is designed for use on level, paved roads in internal traffic. Combined journeys: The trailer components are not designed (without trailer coupling) for combined journeys with several trailers. Payload: 60 t at 6 km/h and uniform loading (surface load) of the loading area between the axles. Point or strip loads are only permitted after notification. Base frame: Sturdy welded construction made of sectional steel Loading area: Size approx. 6000 x 2500 mm, loading height approx. 1012 mm, loading area cover with softwood planks, all-round recessed edge protection Steering: Hedpfxouf Rw To Agtont All-wheel steering on 4 pendulum axles, drawbar can be raised, removed and repositioned from front to rear, suspension height on towing vehicle approx. 650 mm (other suspension heights are only permitted after notification), drawbar eye to DIN 74054 dm 40 mm, tie rods with adjustable ball joint heads, diagonal or drawbars adjustable and fitted with low-maintenance spherical bearings, drawbar drop safety device to UVV (accident prevention regulations) Chassis: 4 steered swing axles, 2 steered axle lines to achieve an even load on the wheels, wheels with elastic solid rubber tires approx. 559 x 406 mm, wheel hubs with tapered roller bearings and permanent grease lubrication. Paint finish: Top coat RAL 5002 ultramarine blue Additional equipment: - Optional: dual-circuit air brake system acting on 4 wheels, gradient < 4%. Separate parking brake via spring-loaded brake cylinder, also acting on 4 wheels. - 2 lashing eyes or crane eyes made of round steel welded horizontally into the outer beams on both long sides, only use the crane eyes when the trailer is not loaded - Turning radius inside approx. 2100 mm - Outside turning radius approx. 5500 mm - Drawbar approx. 1500 mm long Rental or sale EU-wide.

Condition: new, Year of construction: 2024, functionality: fully functional, fuel type: diesel, color: white, power: 550 kW (747.79 HP), output voltage: 690 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 550 kW (747.79 HP), motor manufacturer: Caterpillar, type of cooling: water, 3x Lloyds Approved marine generator sets, brand new. All required Lloyds documentation available for class registration. Cat C32 generatorset / 550eKW / 690 Volt / IMO II Hsdpfx Aex Ec D Tjgtent

Condition: new, empty load weight: 8,000 kg, maximum load weight: 80,000 kg, overall weight: 88,000 kg, axle configuration: 4x2, first registration: 11/2024, next inspection (TÜV): 11/2025, loading space length: 6,000 mm, loading space width: 2,400 mm, loading space height: 1,100 mm, suspension: hydraulics, color: light blue, Year of construction: 2025, operation weight: 88,000 kg, Heavy-duty industrial transport trailer with hydraulic lift eight axles that hydraulically raise and lower the trailer via a control valve Hnodeva E Tkopfx Agtot all-wheel steering can be coupled on both sides, at front and rear transport floor made of 50 mm Douglas fir or without floor according to customer requirements optional with hand brake or air brake system optional lighting system on both sides further information available upon request.