Safety workplace

WIBO Jekt Weiss TCRJO 180/98

Condition: used, Year of construction: 2001, Baffle width: 4000 mm. Baffle height: 1000 mm. External dimensions: 4600 x 1500 mm. 2 x 1.5 kW motors. Total nominal flow rate: 7000 m³/h. Right and left exhaust nozzles with 300 mm diameter. Storage location: Garbsen Pjdpsvvizkjfx Aahopu

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 1,628 h, load capacity: 3,000 kg, lifting height: 4,700 mm, free lift: 1,647 mm, fuel type: diesel, mast type: triplex, construction height: 2,450 mm, fork carriage width: 1,260 mm, empty load weight: 4,530 kg, drive type: Diesel, construction width: 1,320 mm, Off-road forklift Load centre of gravity: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Technical condition: good Front tyres type: pneumatic Front tyres size: 275/70 r22.5 Front tyres condition: 60 - 80% Ppedpfx Asvgh Ikoahsu Rear tyres type: pneumatic Rear tyres size: 7.00-12 Rear tyres condition: 60 - 80% Side shift, 3rd valve, front work lights, heating, soot filter, full cabin, full free lift, CE certificate,

Year of construction: 2024, condition: like new (used), functionality: fully functional, Stainless steel trolley Stainless steel cabinet Pedjil Hfqspfx Aahspu for sheets 40x60 3 sides closed front with door Cabinet mobile Used device cleaned Come to our large bakery machines sales warehouse!

Condition: ready for operation (used), Year of construction: 2023, Load capacity: 1450/1125kg, load center: 600mm, lift height: 3200/4900mm, battery weight: 300-350kg, free lift: 900mm, mast height lowered: 2100mm, mast height extended: 4900mm, reach: 590mm, ground clearance under mast: 80mm, ground clearance at axle center: 50mm, track width: 1292mm, frame cross-section: 1058mm, front overhang: 655mm, wheelbase: 1120mm, rear overhang: 175mm, side shift: 80mm left / 80mm right, lost load thickness: 880mm, fork tilt back: 3°, fork tilt forward: 3°, min. turning radius: 1350mm, support arm height: 282mm, support arm length: 530mm, maximum speed: 6km/h, gradeability: 5%, battery capacity: 24V/270Ah, fork dimensions: 35x100x1070mm, front wheels (polyurethane): OD 200mm / width 50mm, rear wheel (solid rubber): outer diameter 250mm / width 75mm, AC drive motor: 24V / 2.5kW, AC pump motor: 24V / 5kW, rated power: 2.5kW, width: 1512mm, length: 1950mm, net weight without / with battery: 2800/3150kg, operating hours: 86h. An on-site inspection is possible. Podpfx Aaow S Tyajhjpu

Condition: good (used), Hook type shotblasting machine 250 kg TURBOTECNICA DELTA GR 7-10 Type: Hook type Max. diameter of workpiece: 750 mm Max. height of workpiece: 1000 mm Max. workpiece weight: 250 kg Machine oppening width: mm Nr. Of turbines: 2 Turbine type: 260 Turbine wheel diameter: 260 mm Power of turbine: 5,5 kW Max. turbine flow: 74 kg/min Type of transport rail: Y Cleaner type: airwash Foundation: no Housing protection: Mn+ rubber Req. air flow: 2.000 m3/h Pjdpfewm Ar Nex Aahspu Total weight of machine: 0 kg Total width of machine: mm Total height of machine: mm Total length of machine: mm Machine is ready for operation

Condition: good (used), Turbo systems stainless depositor Psdpfxeffh Ade Aahjpu Model: D900 Stainless depositor, 25Kg hopper, variable speed, hand operated trigger for discharging product

Condition: new, ⭐⭐⭐⭐⭐ (5.0) 42 ratings ✈️shipping : 45-day delivery ✈️ ✅✅✅Energy class A+++✅✅✅ ⚡️ Top service ⚡️ Fast delivery ⚡️ Great support! ⭐€10,850 EXCL.VAT & SHIPPING⭐ ►►Buy It Now◄◄ ✳️Keep your liquidity! We offer a variety of financing models to ensure your investment has the best chance of success. Contact us today to learn more about our hire-purchase, warranty or lease programs. ✳️ ➖➖➖➖➖ ►►►⌛⏰ FASTEST delivery time❗ ⌛⏰►►► ✨✨Buy directly from the manufacturer and secure the price and quality advantage!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ☘️Eco-Friendly☘️⚡️Green Energy⚡️☘️ ⭐ Paint Booth – WETLINE-SP-1500 ✔️ Internal dimensions: 1390 mm L * 1500 mm W * 1400 mm H ✔️Pool height : 561 [mm] ✔️Filter system : double layer water curtain ✔️Filtering material : city water, plate filter and mechanical separator with backwash ✔️Filter material cleaning : thin and thick grid ✔️ Pump output : 1.5 [kw/h] 940 [d/d] x 1 piece ✔️Number of fans : 1 piece ✔️Fan performance : 5,400 m3/h x 1 ✔️Fan motor power : 3 kw/h Podpfjc Uthdex Aahopu ⭐The cabins can be made of galvanized sheet metal or stainless steel. They can be designed to be integrated into the automatic and manual systems. ⭐At the pool there is a platform for material and personal safety. The platform covers the entire pool. ⭐In the Filterline wet painting booth, environmental pollution is prevented by the simultaneous use of 3 different filter systems. ⭐Wet paint particles, sucked in the air by a suction fan, are caught by the water curtain at the back of the cabin and transported into the pool. ⭐Wet paint particles in the trace amount that are not caught by the water curtain are caught by the separators on the suction ducts on the back of the water curtain, and the fresh air outlet is from the flue. ⭐The backwash system is applied in the separator section to help the process of retaining the wet paint particles of the separators. The filtration efficiency, whose contact area is increased by spraying wash water through the nozzles, is maximized. ⭐While paint dirty water accumulated in the basin enters the pump suction chamber, it goes through a coarse and a fine mesh to prevent clogging of the pump spray water, thus ensuring paint particles are retained. ⭐When the dirty water in the pool becomes unusable, it can be disposed of from the waste water valve located behind the grates in the suction department. ⭐By using a paint separator system, the water in the pool is cleaned from the paint and used continuously. ⭐The separated paint residues are drained by a filter press and must be disposed of properly. ⭐Price quoted is for the smallest standard size in stainless steel. All devices/machines are new, not used. Do you want a special configuration ❗ Call us now❗ ☀️ 2 YEAR WARRANTY ☀️ ☀️We have CE certificates for all our machines and ATEX certificates for the necessary machines.☀️

Condition: new, Year of construction: 2025, functionality: fully functional, Rotating basket parts washing machine for washing engine blocks and parts - new machine Technical details: Basket diameter: 900 mm Loading Height: 450 mm Loading Capacity: 300 kg Tank capacity: 80 lt Pump pressure: 2,5 bar Pump power: 3,0 Hp Heater: 7,5 kw Electricity (V/Phase/Hz): 220-380-415/3-1/50-60 Timer: 0 - 90 min. Working temperature: 0-90 C° Packing size:1450x1080x1340 mm Podpfxjncfmve Aahspu Packing weight: 300 kg Main dimensions: W x L x H: 1100 x 1100 x 1150 mm Weight: 350 kg The parts washing machine is also available in larger sizes! Larger machines: AWM1250: With 1150 mm basket diameter and tank capacity 200 lt AWM1500: With 1350 mm basket diameter and tank capacity 300 lt If you are interested, please contact me! More machines for sale: Berco, Comec, Sunnen, Carmec, Kwik-Way, Serdi, PEG Valve grinder, head and block resurfacer, valve seat milling, pressure tester, parts washer machines

Year of construction: 2020, condition: refurbished (used), Dear customers, Our experience has shown that communication via email often unnecessarily prolongs the process. We would like to help you quickly, and for that, it is better to spend three minutes on a phone call than to exchange emails for three days. TSWi 20.20 Dry spray wall Pjdpfjfr T Eqox Aahopu Dimensions: 2000 x 2000 mm (W x H) Fan is installed in the wall Airflow: 7,200 m³ / h Motor: 1.50 kW, explosion-proof Exhaust pipe: 400 Ø mm Depth: 900 mm Double filtration: Paper filter + Paint stop filter mat Clamping bar (+ EUR 150.00 net) Options/additional cost for: Transition from square to round: EUR 150.00 net Paint stop filter mat with clamping bar: EUR 150.00 net Side guide plates with hinge: EUR 590.00 net Images may vary. We would also be happy to offer you complete spray booths with a supply air system, heat exchanger, supply air ceiling, piping, etc. Simply contact us.

Condition: excellent (used), Year of construction: 2010, ZENTEX PPH 5 baler is a device for compacting and crushing cardboard and foil. The baler makes it possible to reduce the volume of waste material and is ideal for warehouses, wholesalers and logistics companies. The cardboard baler is equipped with a swing door, maximum bale size 70x50x45 cm. Pressing time including return stroke 23 s. Advantages of the Zentex PPH 5 carton press: - Reduced volume of waste going to recycling - Saves time spent on waste management Ppedpfendcxgsx Aahju - Equipped with a module to compact paper and film - Prevention of space restriction by stored cardboard and foil in alleys and aisles. The offer concerns the Zentex PPH5 waste paper and film baler : - Manufacturer: ZENTEX - Product condition: used - Year of manufacture : 2010,2012,2013 - Model: PPH5 - Width: 84 cm - Depth: 72 cm - Height: 207 cm - Weight: 360 kg - Power: 1500 w - Voltage: 400 v Net price : 1890.00 euro each year of manufact. 2010 (Product code: MTP000234) 1990.00 euro each year of manufact. 2012 (Product code: MTP000235) 2090.00 euro each year of manufact. 2013 (Product code: MTP000236) The Zentex PPH 5 cardboard compactor is a professional device that effectively reduces waste. It bales waste into ready-to-collect bales, which are double-bound by strapping. The baler is ideal for companies with small quantities of waste, small wholesalers, food shops and clothing shops. * Large quantities available, prices can be negotiated for larger orders. * Transport throughout Europe possible. * The above offer does not include transport costs. * Location: Chmielów/Tarnobrzeg, Poland.