WEIMA FineCut 2500-800 shredder

WEIMA FineCut 2500-800

Condition: used, Year of construction: 2003, Technical details: pressure: 40 t box opening: 1200 x 730 mm material: Pappe,Plaste - cardboard bottles voltage: 400 / 50 V / Hz Nkodpfx Aou Nw Ezjd Njt total power requirement: 16,4 kW transport measurements machine: 6,5 x 6,2 x 2,7 m Fully automatic hydraulic CHANNEL BALL PRESS for recycling with conveyor unit/conveyor belt LxW: 4500x1000mm motor driven with automatic binding unit 3-fold bale count display/counter bale chamber LxWxH: 1800x800x800mm with 1,2m³ volume bale size LxWxH: 800x800x300-1600mm Filling opening LxW: 1200x730mm: Filling height 1200mm Hopper size LxWxH: 1200x1200x1400mm; filling height 2500mm *

Year of construction: 2024, condition: new, ZIGZAG air separators Application description: ZIGZAG type air separator is a device designed to purify materials in the waste recycling process. The separator separates light fractions from heavy fractions by pneumatic method. It works well with a wide range of waste materials of 0-150mm size. Air separators of this type are used for pre-ground, jagged or very fine materials. Thanks to our unique design, the separator has the ability to adjust at many points that are important for the purity of the received fractions. ZIGZAG type separators are used in many areas: Nodpfx Ajua D Aled Nskt weight classification of metal granules purification of shredded scrap from the light fraction (films, plastics, paper) removal of volatile fraction during recycling of WEEE purification of plastics, rubber purification of municipal waste, glass removal of dust Construction description: The ZIGZAG separator consists of individual components mounted on a common support structure. In the first part, the ZIGZAG module is installed. The module has an inspection hole and regulation of the material stream passage gap. In the second part there is a cyclone discharging the light fraction. Underneath the cyclone there is a variable speed sluice for ejection of separated materials. A fan with electronic speed control is located on top of the structure. The structure is designed in part for loading and unloading by conveyor belts. The separator has a control cabinet equipped with a safety system.

Year of construction: 2023, condition: new, ‼️BLACK FRIDAY OFFER‼️ RECEIVE A €500 DISCOUNT WHEN YOU COMPLETE YOUR PURCHASE‼️ OFFER VALID UNTIL SATURDAY, 29.11.2025‼️ We have shredders and other recycling machinery in stock in Heilbronn for all types of recycling. From copper recycling to plastic recycling, you can purchase all machines from us. Feel free to inquire. ‼️CAN BE INSPECTED ON SITE‼️ We would be happy to demonstrate the machine to you live in Leingarten! By appointment only! We are based in Heilbronn—a German company, operating under German laws, with warranty and service! We also speak English! Nodpfx Aep E Einod Nskt Professional copper recovery from cables ranging from 1.5mm to 120mm made easy! ➡️Supplied with accident prevention certification (UVV) from a German company Our cable stripping machine Josan S120! ▶️Weight approx. 236 kg This allows you to recycle cables quickly and cost-effectively and obtain pure copper. Very high processing speed. Powerful 3 kW motor. Built for durability. View detailed images of the machine or inspect it live at our site in Leingarten (by appointment only). Net price: €3,999.00 +19% VAT: €759.81 Gross price: €4,758.81 Since we also do recycling ourselves, we can demonstrate our machines to you by appointment. CE-certified machines from us. ‼️For further questions, please contact us! We can only respond if you provide your name, address, email, and telephone number. Otherwise, your inquiry may be filtered as spam. We will get in touch and provide you with preliminary advice!‼️ Specifications/features/prices subject to change. Errors excepted.

Year of construction: 2024, condition: new, Overview - of the different variants *Not every position is required: Optional: Nsdpfsff Sbisx Ad Nskt -Bale shredder MHB from 24.990 € net -MHZ straw mill from € 7,980 net -Special hopper 970 € net -Cyclone from € 3,750 net -Sheet metal silo demonstrator with discharge (only sketched in the picture) *optional, if you want to load with the wheel loader Unit price net from € 14,750 - Demonstrator -Dedusting auger - length approx. 4 m 4 sieves are mounted on the underside, which are extracted. Unit price net from: 9.750 € - Extraction parts / hoses flat rate 945 € net - Complete control system Net unit price: € 2,750 -Demonstrator extraction unit MMJET 160 Demonstrator, with cleaning Connection 160, fan 2,2kw air capacity 1850m³ /400 V Automatic compressed air cleaning Unit price net from: 6.950 € -Baler B 400 Bales approx. 400x400x800 (height adjustable) Up to 30 bales per hour with + - 20 kg from 59.995 € net *A reference system (baler) is located in zip code: 64579 Gernsheim Technical data: Bale size (WxDxH): 400 x 400 x 800 (height can be adjusted on request) Bale weight +/- 20 KG (depending on material) Capacity: approx. 30 bales per hour Storage container approx. 0.7m³ capacity Filling level sensors for min./max. filling level in the container Hydraulic pre-compressor Hydraulic compression ram Hydraulic unit, valve block with oil tank Pump 18.5 KW / 50 liters Rollers in the bale chamber for easy bale push-off Dimensions (l x w x h) 3105x2830x2455 mm Weight approx. 1500 KG mütek baling presses / wrapping machines are designed for the production of bales from a wide variety of materials such as shredded micanthus or elephant grass, wood chips, sawdust and shredded straw. straw. The machine is characterized by a robust design that guarantees consistent quality in continuous operation. quality in continuous operation. The baler compacts the material filled into the storage container without the addition of binding agents and packs the material into plastic bags. The volume of the material can be considerably with the baling press. The volume reduction rate depends on the material. The maximum material moisture content must not exceed 18 % Atro. The container of the mütek baler can be fed automatically or manually and has a volume of approx. 0.7 m³. volume of approx. 0.7 m³. Containers with a larger volume or with an attached suction and filter system as a complete disposal unit are also available. In addition to automatic filling via deduster, mütek also offers filling by means of screw conveyors. With both variants, automatic automatic dedusting is possible. mütek baling presses are equipped with a control cabinet for the control system. In the standard version, the dimensions of the bales (width x depth x height) are 400 x 400 x 800 mm. However, the height can be adapted to your requirements on request. The following advantages arise in the production of bales: - simple and safe storage - No loose dust - Minimization of the storage volume - Low transport volume *Requirements for source material: - dry (max. 30 % ATRO) - Maximum length 35 mm

Condition: ready for operation (used), Feature Specification Rotor Size φ ≈ 370 mm × 1500 mm Rotor Speed 80–125 rpm Knife Count Up to 123 (V‑rotor) Power 75–90 kW (electromech); up to 110 kW Infeed Opening 1500 × 1890 mm Weight ~6400 kg Output Particle Size 15–100 mm (exchangeable screen) Drive & Bearings WAP gearbox, sealed bearings Control Siemens PLC Discharge Belt / screw / suction available Nkjdpfsw A I Tdex Ad Nst Applications Plastics, packaging, wood, fibre, etc.

Condition: reconditioned (used), Year of construction: 2006, power: 320 kW (435.08 HP), Stationary shredder LINDNER JUPITER 3200 Electric drive: 2x 160 kW Powerbelts new. Njdpfswg Ev Dex Ad Nskt Incl. hydraulic aggregate, electric control cabinet.

Condition: used, Year of construction: 2006, Technical details: bending angle max.: 75 ° working height: 850 mm operating voltage: 380 V Weight approx.: 1,0 t dimension machine xH: 1,9 x 2,6 x 1,0 m transport measurements machine: 2,6 x 1,8 x 1,0 m Single bending and double bending of reinforcing steel possible. Number of bending forms = 2 pieces Bending angle 40°; 60°; 75°. bar size: angle form=Ø 12 - 50mm and double angle=Ø 12 - 35mm Operation via control panel with touch screen bending plate: -Ø 480mm -speed= 7,5 / 15 rpm. -bending pin bore= Ø 48mm (16 pieces) -center pin=Ø 50 x 94mm Counterholder bars: -2piece length=840mm -Displacement per handrail 100mm -13 holes of size Ø 48mm Nkedpfx Adeu Ibu Rj Not Accessories: bending attachments 2x Ø 60mm; 2x Ø 78mm; 1x 96mm; 1x Ø 122mm; 1x Ø 160mm; 1x Ø 200mm 1x pin for plate 8x counterholder div. shapes 1x bending trough *

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 208 h, functionality: fully functional, RS-F-8 flexo press designed to produce high quality labels and lML labels (optional) in high speed. 1000mm large size servo motor controls the unwind device, which can make the paper run smoothly and the end stop automatically Compact machine and extremely short paper paths reduce material waste .The whole machine adopts servo system, including unwind unit, two traction rollers, 8 printing units, 1 set of die-cutting unit, wasteremoval unit, 1 set of crush knife, 1 set of shear knife. Nkjdpfx Adowb Shcs Nst The full servo driven design makes the tension of the material stable and smooth Large roller of diameter water-cooled roller, paper path has a larger wrap angle, the printing roller and water-cooled roller are integrated, the operation is more stable, the cooling is faster, and the running speed is relatively faster.

Condition: good (used), Year of construction: 1992, functionality: unexamined, overall weight: 18,000 kg, power: 250 kW (339.91 HP), For bulky waste, pallets, residual wood, etc. Single-shaft shredder with electrohydraulic drive Rotor width: 2500 mm Rotor diameter: approx. 500 mm Nedpfxsq I Rkds Ad Nskt Electric motor: 250 kW

Condition: reconditioned (used), Year of construction: 2007, - Primary impact crusher, Brand Laron Model IM 16 - Complete assembly, available as mobile or static unit. - New rotor bearings - New rotor blow bars - Front jaw (impact plate) in near-new condition Nksdpfjimwg Hox Ad Net - Production capacity: 800 t/h - Feed opening: 2320 x 1700 mm. Motor: 600 HP - New bearings and supports - New rotor blow bars - Apron feeder: width 2000 mm, length 10,000 mm. Gearbox and 40 HP motor. Feeder condition: semi-new - Disc pre-screen: width 2000 mm, diameter 1000 mm. Gearbox and electric motor - Hopper with 40 m³ capacity. Bolted and sectional for easy transportation - The entire assembly is mounted on a chassis with tractor head coupling and can be transported on dolly axles. We also have secondary hammer mills, screens, and conveyor belts available to complete a plant.