Pick-up van

UNIMOG U 1300 L Pritsche mehrmals verfügbar

Condition: excellent (used), Year of construction: 2009, Private sale: Hymermobil with numerous extras. Features include 2 air conditioning units, 2 auxiliary heaters (diesel, gas, and electric), ceramic toilet with 2 cassettes, rear garage, first registration 24.08.2009. Isdspl Sngspfx Ag Ijat Other highlights: drop-down bed, leather upholstery, shower, 2000-watt generator with dedicated built-in petrol tank (operable from inside above the oven), 4 solar panels, 1 vehicle battery and 3 habitation batteries (1 year old), 3,300 kg towing capacity. Iveco chassis with automatic transmission, cruise control, 5,400 kg permissible gross weight, 100 km/h speed approval, 2 heated external drawers, underfloor heating and hot water operated via gas or electricity. Includes 2 gas bottles with automatic switchover, twin rear tires, only 78,000 km driven. External shower with hot water, Goldschmitt rear air suspension, rear single beds with option for a full-width sleeping surface (2 additional sections, both long and short available). Automatic satellite system, 2 TVs. Vehicle inspection valid until May 2026 without defects. Approved for transport of up to 8 persons. First registration 24.08.09, 130 kW diesel, very economical—current consumption at 100 km/h is 12.1 l/100 km, at 80 km/h only 10 l/100 km. Vehicle length: 8.19 meters. Additional locks on entry door, separate driver’s cab door, and both garage doors. Reversing camera with multiple viewing angles. Large air awning, kitchen cabinets, carpet, etc., for outdoor use available and can be included if interested.

Condition: used, mileage: 11,111 km, power: 100 kW (135.96 HP), first registration: 06/1987, fuel type: diesel, overall weight: 7,490 kg, color: green, Equipment: all wheel drive, Used Vehicle * Vehicle No.: * Turbo engine OM 366, 100 kW Iedpfxolxlqxe Ag Ioat * High-speed axles * Flatbed 3.15 m x 2.3 m * Good condition ---- -> Please note that viewings are only possible by prior appointment. Thank you for your understanding. -> Sale exclusively to businesses or for export. The above data, photos, and equipment list are provided solely for general identification of the vehicle and do not constitute a guaranteed specification in the legal sense of a purchase contract! All information and accessory details are provided WITHOUT WARRANTY. Subject to change, prior sale, and errors! The equipment list does not form part of the contract and must be checked in detail by each interested party on site before purchase. Subsequent complaints will not be accepted.

Condition: new, Year of construction: 2026, ♻ Universal use (diverse wood, pallets with nails and pins, particle boards, waste and scraps, veneer, MDF plates, cardboard boxes, Iaodsiq U Ayspfx Ag Ist plastics, textile etc.) ✔ Power: 30 kW ✔ Shaft length: 870 mm ✔ Shaft diameter: 270 mm ✔ Shaft RPM: 80-120 rpm ✔ Number of cutting knives: 38 ✔ Granulation: 10-50 mm ✔ Capacity: up to 8 m3/h* ✔ Filling opening: 2031 x 1565 mm ✔ Dimensions L/W/H: 3,21/1,97/2,04 m ✔ Weight: 2450 kg 2 years warranty or 2000 working hours

Condition: used, functionality: unexamined, Year of construction: 2017, Ponsse Fox 8W Timber Harvester (2017) with H6 harvesting head Iaedpexw U I Ujfx Ag Ijt

Year of construction: 2025, condition: new, functionality: fully functional, overall weight: 700 kg, total length: 2,860 mm, total width: 1,230 mm, construction height: 1,700 mm, Fully operational exhibition dryer, Ø 1090 mm Iodoxbz Hropfx Ag Ioat We are offering our fully operational exhibition dryer with a diameter of 1090 mm. The unit is very compact and practical in terms of required space and easy relocation. Technical Details: Connection: only a water connection for spraying and a 16A power plug are required Heating system: 4 kW electric heater Wood moisture measurement at 3 measuring points Plug-and-play design – ready for immediate use Advantages: Ideal for small carpentry workshops Easy to transport and flexible positioning

Condition: good (used), functionality: fully functional, Year of construction: 2012, operating hours: 20,200 h, load capacity: 5,500 kg, fuel type: gas, Equipment: clamp, gripper hydraulics, For sale is a Hyster S 5.5FT gas-powered forklift. The forklift is fully functional and in good condition. Not offered with forks as shown, but with a Mayer paper roll clamp with rotary hydraulics from 2005 (last photo). Technical specifications: Year of manufacture: 2012 Rated load: 5500 kg (5.5 tonnes) Load center: 600 mm Turning radius: approx. 2375 mm - 2534 mm Lift height: up to 5300 mm Free lift: available Iasdpfewalyiox Ag Ijt Transmission: DuraMatch™ 1-speed or DuraMatch™ 2-speed Travel speed (loaded/unloaded): approx. 16.7 - 17.2 km/h Dimensions: approx. 3,500 mm * 1,420 mm * 2,500 mm mm Weight: approx. 7,800 kg Transport and loading can be arranged throughout Europe upon request for an additional charge. Prices exclude VAT. Viewings are available by appointment. Contact us; our team will be happy to assist you. Trade-ins or exchanges are possible! Machine Purchase/Sale PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or to contact us, visit our website

Condition: used, Year of construction: 2018, operating hours: 6,000 h, power: 158 kW (214.82 HP), front tire size: 600/60R30, rear tire size: 650/75R38, Equipment: compressed air brake, Equipment: / compressed air system (2-circuit), top link / hydraulic (rear), preparation automatic / steering system, control unit - double-acting (4x), / working lights 6x front, working lights / 8 or more rear, all-wheel drive, drawbar - / autom Iasdpfx Aju Ezhlsg Ijt

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm rack length (distance 1,300 mm) Iedpfx Agemhhf Se Ieat Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 4,200 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright center distance (4,000 mm shelf length) Fastening material (screws, nuts and washers) - (*Delivery or collection in approx. 1 - 2 weeks) - (*No damage to paintwork!) - (*No damaged components!) - (*Replacement parts can be reordered and extended at any time) Ijdjmhhypepfx Ag Ioat - (*Offer available in larger quantities: approx. 50 stands in stock) Net price: € 1,990.00 plus VAT. Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 4,200 mm - Load capacity per upright 2,200 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. Delivery can be made in approx. 1 - 2 weeks after receipt of order. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The surface must be concrete, level and suitable for dowels and must be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any necessary official approvals are in place. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: used, mileage: 66,944 km, power: 225 kW (305.91 HP), first registration: 09/1989, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: red, gearing type: mechanical, * Anfragen gerne per WhatsApp * Abrollkipper Marrel * Typ MA 19.50 * hydr. Unterfahrschutz * Radstand 4,80 m * 8 Gang Schaltgetriebe + Splitt * Federung: Blatt/Blatt * V8 Motor * Arbeitsbeleuchtung * AHK + DL- Anschlüsse * Staubox * 4558 Betriebsstunden * Differenzialsperre * 3- Sitzer * Dachluke * Blaulicht Iasdpoi Had Ssfx Ag Iet * Reifen 315/80R22,5 ca. 80-70% * Feuerwehrfahrzeug * Fahrzeug aus 1. Hand * deutsches Fahrzeug * gegen Aufpreis mit Abrollcontainer * · Netto-Verkauf innerhalb der EU wird nur noch mit MWST Kaution und dem Nachweis der Zulassung im Bestimmungsland (Gelangensbestätigung) durchgeführt, · Verkauf nur an Gewerbe, Transport zum Hafen möglich, Dieses Angebot ist unverbindlich und freibleibend. Irrtum und Zwischenverkauf vorbehalten. · Keine Gewähr auf Eingabefehler. Besichtigungen nur nach Vereinbarung, WhatsApp