Forklift

Toyota 8 FD F 30

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 13,412 h, load capacity: 3,000 kg, lifting height: 3,300 mm, fuel type: diesel, mast type: simplex, construction height: 2,160 mm, drive type: Diesel, Diesel forklift truck Njdeyw U Iwjpfx Ahvjwd ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Standard Condition: Ready for use and fully functional Technical condition: Good 3rd valve, 4th valve, heating, full cabin,

Condition: new, Year of construction: 2024, machine/vehicle number: CAT0DE50LN7B00452, fuel type: diesel, power: 40 kW (54.38 HP), motor manufacturer: Caterpillar C3.3, General information Field of application: Construction Weights Empty weight: 889 kg Functional Generator capacity: 50 kVA CE mark: yes Other information Fuel consumption: 8.7 Liter per Hour at 75% Load Generator: Caterpillar SR500 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 103 l Transport dimensions (LxWxH): 2,3x0,96x1,4 Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or Ronald van der Laar for more information = Additional options and accessories = Nwodpfx Ahjtqlf Dsvsd - Battery - Control Panel - Steel canopy - Tank

Condition: used, machine/vehicle number: 52-8FDF30-84089, Year of construction: 2022, operating hours: 29 h, lifting height: 5,000 mm, free lift: 1,270 mm, fuel type: diesel, fork length: 1,200 mm, Empty weight: 5.080 kg Lifting capacity: 3.000 kg Maximum passing height: 242 cm Remanufactured: Yes Front tyre size: SE Rear tyre size: SE Transport dimensions (LxWxH): 2,87x1,33x2,42 Please contact Karl Leitner for more information = Additional options and accessories = - 4th valve Nwsdou Dwgnopfx Ahvod - Heater

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 10,454 h, load capacity: 3,000 kg, lifting height: 3,700 mm, fuel type: diesel, mast type: simplex, construction height: 2,420 mm, drive type: Diesel, Diesel forklift ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Standard Condition: Ready for use and fully functional Technical condition: good Sideshift, 3rd valve, heating, full cabin, Njdpfx Asyt Txrshvjwd

Condition: used, Year of construction: 2023, functionality: fully functional, fuel type: diesel, total length: 1,925 mm, construction height: 1,361 mm, drive type: Diesel, construction width: 1,110 mm, Other Technical Condition: New Njdpjumvb Isfx Ahvjwd

Condition: like new (used), functionality: fully functional, Year of construction: 2015, fuel type: diesel, Equipment: cabin, Forklift with sideshift, left-right fork positioning, and triplex mast. Nsdpfsx Sxvzox Ahvewd

Condition: used, Year of construction: 2012, operating hours: 4,500 h, CAT POWER GENERATOR/FLOODLIGHT SYSTEM Type: GEP 18 LT Generator 16.5 kVA Diesel 4-cylinder Mast with 6 floodlights 4-point outriggers Nsdpfxswb Nhts Ahvewd 80 km/h high-speed Hot-dip galvanized chassis Height-adjustable drawbar Ball head and jaw coupling etc...

Condition: used, Year of construction: 1998, pressure 3500 t stroke 900 mm Distance table / ram, stroke down 1000 mm distance table / ram, stroke up 1900 mm table surface area 3150 x 2150 mm ram surface 3150 x 2150 mm Total Weight of Tool max. 30,0 t Weight of Tool Top Part max. 20,0 t speed down 400 mm/s working speed 0,9 - 9,2 mm/s Hydraulic Operating Pressure 280 bar oil volume 5500 l rated current 760 A voltage 400 V frequency 50 Hz power requirement 425 kW weight 231,0 t SPECIAL DEAL as is where is, stored in dismantled condition WITHOUT putting into operation / WITHOUT additional work free loaded to truck Hydroformpress / IHU-Press maximum preforming force approx. 1000 t Total tool weight approx. 30 t upper tool weight approx. 20 t · Die function interface: 4 controlled axis, 3 b/w functions slide, 4 b/w functions bed · Parallelism control: over the length side of the press · Light curtain: front and back side · Light barrier: left and right side Nwsdpfxevuukhs Ahvjd · Slide locking: TDC-Position · Two-hand control panel: 1 · Independent high pressure circles water hydraulic system: 2 · Max. working pressure: 3.000 bar · Displaced volume of each Intensifier: 3,74l · 2 Filling pumps: volume and pressure depending the power grid · Location of pressure intensifier: to be determined · Main pumps: located on the press crown/oil tank · One die change table: 6,7 x 2,15 m · Max. die size: 3,15 x 2,15 m · Clamps on slide: Hydraulic · Clamps on the bed: Mechanical · Electrical control: Schuler Multiview HF Attention: This machine is a EU re-import! If the machine is to be installed and operated in the EU, it must be adapted to the currently valid EU directives of the country of installation before it is put into operation This work is not part of the offered price

Year of construction: 2009, condition: excellent (used), I sell the throughfeed CNC drilling machine HIRZT Livra/B, Year 2009. Working width up to 820mm Configuration: 14 + 6 + 2 pcs. drilling units Backfeeding system to return the elements to the operator or move forwards as a throughfeed machine. Total area covered: 2000 x 2000 (+800 +800mm) Total weight: 1350 kg. Njdpfxsnxqdwe Ahvswd With full documentation and CE. Very good condition. Available immediately.

Year of construction: 2009, condition: used, Used machine Year of manufacture: 2009 Condition: overhauled Description: The machine concept is extremely straightforward. The workpiece is placed into the machine. A quickly adjustable stop with pneumatic locking mechanism centers the workpiece within the machine. Upon foot pedal activation, the workpiece is pneumatically clamped and automatically conveyed to the drilling unit (30 m/min). Vertical spindles drill from below, ensuring that chips do not remain on the workpiece as they would on conventional machining centers. The horizontal spindles work on two sides of the workpiece. The workpiece length can be unlimited, as it is moved toward the drilling unit (X-axis). The drilling spindles, either individually or in a group, are freely programmable and move along the Y-axis. Drill depth and horizontal drilling operations are managed by the Z-axis. After all drilling operations are completed, the workpiece is conveyed back to the insertion side or, if desired, to the discharge side. Unlike conventional machining centers, where the workpiece is clamped using vacuum pods that need to be adjusted to the workpiece size, this step is completely eliminated with the 3-axis controlled point-to-point drilling machine. Advantages: - High processing speed - Excellent price-performance ratio - Minimal space requirements All drilling operations can be performed in the smallest space: - Line boring - Structural drilling - Fitting drilling - Case connector drilling Equipment: - Welded machine frame - Drilling head with 7 vertical spindles and 1 horizontal twin spindle - 3-axis CNC control: - X: NC-controlled panel feed via traversing pneumatic clamp - Y: NC-controlled drilling head movement - Z: NC-controlled spindle depth adjustment - TRK precision guides - Pneumatic split pressure beam above the drilling unit - Pneumatic roller hold-downs at the infeed - Pneumatic transport clamp - Pneumatically lockable side stop with rollers - PC-based control with Windows XP (1 GB flash memory) - 8" color screen - Alphanumeric multifunction keyboard including mouse - Network card - USB interface Technical data: - Number of controlled axes: 3 - Maximum panel width: 1,000 mm - Maximum drilling width: 800 mm - Maximum feed speed (X-axis): 30 m/min - Spindle speed: 3,400 rpm - Maximum drill bit diameter: 35 mm - Maximum overall drill bit length: 70 mm - Drill bit holder: 10 mm shank with clamping surface Nwedpfxswmhmfj Ahvjd - Connection power: 2.5 kW - Extraction nozzle diameter: 100 mm - Required pressure: 6 bar - Working height: 900 mm - Fold-out roller support at infeed side, 500 x 750 mm Dimensions: 1,650 x 1,920 mm Availability: short-term Location: North Rhine-Westphalia