Tipper semi-trailer

TecnoKar SUPERTOP F1 6900 28 m Nuovo di fabbrica

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one Gedpsfg E Hpsfx Ag Dskf high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: new, tire size: 315/80R22.5, Equipment: ABS, 🇮🇹SEM. MENCI SA700G TIPPER BODY - CHASSIS TYPE: SA700G - AXLE BRAND: ROR - DRUM ETO - AXLE CONFIGURATION: 1 STEERING AXLE + 2 FIXED AXLES - DISC BRAKES - BRAKING SYSTEM: KNORR, 2 SENSORS / 2 CHANNELS, LIFTING 1 AXLE - WHEELBASE: 1310 mm - STANDARD LANDING LEGS - CHASSIS COLOR: MENCI METALLIC GRAY - MANUAL UNDER-RUN BAR - PENTA HYDRAULIC CYLINDER - BODY TYPE: ROUND - BODY MATERIAL: STEEL - BODY LENGTH: 7450 mm - BODY HEIGHT: 1840 mm - REAR DOOR: TYPE B, 20-DEGREE INCLINE - BODY CAPACITY: 30m³ - FLOOR THICKNESS: 5.5 mm HB 500 - SIDE WALL THICKNESS: 3.5 mm HB 500 - FRONT WALL THICKNESS: 4 mm HB 500 - DOOR THICKNESS: 4 mm HB 500 - HYDRAULIC DOOR OPENING - HYDRAULIC DOG RELEASE - 2 SAFETY LOCKS BODY COLOR: IVECO WHITE IC194 SIDE STRIPES COLOR: BLUE RAL 5010 DOOR WITHOUT SEAL TMPS BRAND: KNORR REAR LIGHTS: EUROPOINT III - N. 10 SPEEDLINE DISCS 22.5 x 9.00, BOLT HOLE D. 26 - N. 10 TYRES: GY 315/80R22.5KMAXSG2 Gksdpsvzh T Nofx Ag Def VIBRATOR PRE-SETTING STAINLESS STEEL TOOLBOX 400x300x450 mm STANDARD MANOMETER 2 TOW HOOKS RAPID DUMP WITH BUTTON CRAMARO ELECTRIC SHEET SYSTEM, TYPE C REMOTE-CONTROLLED SHEET SYSTEM: YES COLOR: BLUE RAL5010 BOW HEIGHT: 500 mm ROLLER HOOKS POSSIBILITY OF CUSTOMIZED FINANCING OR LEASING AT SITE. FROM 24 UP TO 96 INSTALLMENTS, ALSO WITH ZERO DOWN PAYMENT. OTHER BRANCHES OF OUR GROUP: DOMENICO TRUCK SRL, NAPLES HEADQUARTERS DOMENICO ESPOSITO S.P.A., EBOLI (SA) - OFFICIAL DEALER MERCEDES-BENZ, FUSO, FOTON TRUCK, PIAGGIO COMMERCIAL, AND MAXUS CONTACTS: 0823 1686306 335 6713062 - 377 7064530 BRANCH OPENING HOURS: MONDAY-FRIDAY: 8:30/19:00 SATURDAY: 08:30/14:00 WE OFFER A WIDE SELECTION OF USED MULTI-BRAND COMMERCIAL/INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf – Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania – S-Way – S500-V8-650-580-730-S500-S 500-S500 – Stralis – Man - Nissan V8 - Intarder- 770s -Limited Edition - 660 S Semi-trailer – Refrigerated Tip-Trailer – Lamberet - Schmitz Isuzu – Flatbed – Crane – Tipper – 4 axle – Rear 4 Axle – Tway-T-Way-540- 460 HP – Xway-X-Way– Three-Way Tipper – V8 – Scania – Frost Edition Curtain Side – Box Body – Loader Sideboard – Refrigerated Cell – Insulated with Fridge – Van Domenico Truck srl accepts no responsibility for any discrepancies in technical equipment, optional features, or specifications which may, in some cases, differ from those described. Please verify the features of the specific vehicle.

Condition: good (used), functionality: fully functional, empty load weight: 7,200 kg, maximum load weight: 30,800 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 09/2017, loading space length: 9,800 mm, loading space width: 4,500 mm, loading space volume: 48 m³, suspension: air, tire size: 315.80 r 22.5, color: blue, Year of construction: 2017, Equipment: ABS, sem tecnokar, year 2017, 48m3 aluminum tipping tank with 10 tires, 3 disc axles with 1st liftable and 3rd steerable, ebs, electric sliding discover cover, stainless steel chests, alloy wheels, watertight flag overhead hatch, excellent condition, INTERDRIVE SRL-PARMA CONCESSIONARY Gsdetvplcopfx Ag Dskf

Condition: good (used), functionality: fully functional, empty load weight: 7,900 kg, maximum load weight: 30,100 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 09/2007, loading space length: 10,000 mm, loading space width: 2,450 mm, loading space height: 2,200 mm, loading space volume: 60 m³, suspension: air, tire size: 385.65 r 22.5, color: silver, Year of construction: 2007, Equipment: ABS, Smr 60m3 aluminum tecnokar tank tipper, rear with sealed overhead door, front vibro motor, 3 disc axles with 1st liftable and steerable, hydraulic couplings, uncover cover with manual handling cloth, stainless steel box, air suspension, year 2007, overhauled until 30.11.2024-CONCESSIONARY INTERDRRIVE SRL-PARMA Gksdpfx Agotpm Tms Dsf

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 1250x600 saw band length 8140x54x1,6 mm band speed 15 - 90 m/min table height 855 mm total power requirement 7,5 kW Gedpfxofgyigj Ag Djkf weight of the machine ca. 4,96 t dimensions of the machine ca. 5,7 x 4,0 x 2,75 m 2-column band saw for quick cutting, K-tech 1200H with pusher system P 30. P 60 (option), Fast, quiet and ergonomic cutting Special development for cutting profiles and beams as well as solid material. The material is fixed vertically on and section sides. The machine is from K-tech 800 H standard with an additional horizontal vice equipped. The interaction of the hydraulic Saw frame lowering, material positioning and the Pusher system is CNC controlled. The machines come standard with the environmentally friendly “B&S-Clean Cut cutting system” with minimal quantity lubrication equipped. This saves cleaning effort and is gentle Resources. CNC Control A CNC control allows programming of up to up to 90 cutting programs with different cut lengths, Quantities and mitres. The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.

Condition: excellent (used), HSS saw grinder WERKO Gkedeipid Tjpfx Ag Djf

Condition: used, Year of construction: 2022, Disc section 510 mm serrated Hydr. working depth adjustment Disc section hydr. / working depth adjustment of the leveling unit C-Mix-Ultra tines for Ceus 50 / hydr. working depth adjustment Tine section with hydr. drawbar HD SCHAR 80 mm / (14/K1) Godpfotz Tplex Ag Dskf

Condition: new, 1 brand new semi-automatic horizontal band saw machine with double mitre Make: HUVEMA / Beka-Mak, Origin Türkiye Model: HU 230 DGH-4 / BMSY 230 DGH Gkjdpfovyidmex Ag Dsf Technical data: Cutting range: Round 230 mm Rectangle 320 x 130 mm Square 230 mm -45 ° Round 180 mm -45 ° Flat 230 x 100 mm -45 ° Square 150 mm +45 ° Round 210 mm +45 ° Flat 230 x 160 mm +45 ° Square 180 mm +60 ° Round 120 mm +60 ° Flat 120 x 100 mm +60 ° Square 100 mm Working height 795 mm Main drive motor power 1.0 - 1.3 kW, 400 V, 50 Hz Motor power coolant pump 0.12 kW 2 speeds 35 / 70 m/min Saw blade dimensions 2730 x 27 x 0.9 mm Dimensions L x W x H 1350 x 700 x 1300 mm Weight 415 kg Accessories / Special features: • Semi-automatic operation • Hydraulically clamping vice via foot pedal • Mitering on both sides using a swivel frame o The material to be sawn remains straight in space! o No turning of the material during miter cuts! o High efficiency with enormous time savings! • Preset precision stops 0°, 45° and 60° left and 45° right • Replaceable work table • Hydraulic vice, can be moved sideways to the left and right • Adjustable length stop 500 mm for cuts of the same length • The lowering of the saw arm is continuously regulated by a hydraulic cycle, after sawing the arm moves back up automatically and the vice opens • Coolant system • Chip brush • Pivoting control panel • Electric safety switch for blade tension and saw blade cover • Emergency stop switch • CE-compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund-Wambel

Condition: ready for operation (used), functionality: fully functional, empty load weight: 6,500 kg, maximum load weight: 31,500 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 10/2008, loading space volume: 27 m³, suspension: air, tire size: 385.65 r 22.5, color: white, Year of construction: 2008, Equipment: ABS, Used Tecnokar tipper semi-trailer 27m3, 3 single disc-braked axles with the 1st axle liftable and steering, air suspension, ABS, round steel body with 5mm floor and 4mm side walls, electric Cramaro PVC tarpaulin cover, swinging rear tailgate with pneumatic locks, rear finisher, front cylinder with double-acting hydraulic couplings, year 2008, MOT valid until 31.03.2026 – DEALER INTERDRIVE SRL – PARMA Gkodpoxnqcpsfx Ag Djf

Condition: good (used), functionality: fully functional, empty load weight: 9,000 kg, maximum load weight: 38,000 kg, axle configuration: 3 axles, first registration: 07/2005, loading space length: 1,362 mm, loading space width: 2,480 mm, loading space height: 1,200 mm, suspension: air, tire size: 385.65 r 22.5, color: blue, Year of construction: 2005, operation weight: 29,000 kg, Equipment: ABS, sem tecnokar lateral tipper from ferrous scrap iron, 3 disc axles with 1st liftable and 3rd steerable, tare about 80 q.li, year 2005, side hydraulic-moving pillars, inverted folding tailgate with manual stops, electric tipping impulse .CONCESSIONARY INTERDRIVE SRL-PARMA Gjdpjrrg Tcefx Ag Dskf