Mini excavator

TAKEUCHI TB 216/Powertilt/ Verbreiterbar/TOP ZUSTAND!

Condition: used, Year of construction: 2011, Milling machine Quaser MV 184, year 2011. The machine is sold complete, as shown in the pictures. Includes hydraulic vices, power unit, chip conveyor, belt filter system and extraction unit. Isdpoyfm T Hofx Apceig

Condition: like new (used), Year of construction: 2016, functionality: fully functional, turning diameter over cross slide: 230 mm, turning length: 810 mm, Equipment: documentation/manual, A like-new machine with accessories and complete documentation. Please examine the images carefully, paying attention to the operating hours! The machine will be available in approximately 4 weeks. Control: Heidenhain MANUALPlus 640 HSCI - TFT screen 15.1" - Control panel with alphanumeric keyboard for comments and numeric keypad - Control station can be swiveled 250° Tool drive for automatic turret - with 8 tool stations - Tool drive via gears and clutch - Drive speed adjustable, max. 4000 RPM - Milling with end mill Ø 12mm x 8mm x 45mm / min, C-axis via main drive - Main spindle speed 0.001°/min - 100 RPM Horizontal bed - Prism/flat guide hardened and ground Working area - Swing diameter over bed 400 mm - Swing diameter over compound slide 230 mm - Compound slide travel 220 mm Main spindle drive - Digital AC motor – 50% duty cycle, 16 kW Spindle head - Spindle head DIN 55026 A6 - Spindle diameter in front bearing 115 mm - Spindle bore 82 mm - Speed range RPM 1-3500 Cross slide - Feed rate range, plane mm/rev / Feed rate range, longitudinal mm/rev / Thread pitches mm 0.01-999.9 - Rapid traverse, plane/longitudinal m/min 5/10 - Automatic central lubrication - Digital AC servomotors, plane and longitudinal Tailstock - Quill diameter mm 60 - Quill travel mm 140 - Taper attachment MK 4 - Clamping on the bed with clamping screws - Quill actuation and clamping manual - Tailstock roller guide Control - HEIDENHAIN MANUALplus 640 HSCI - V-constant for manual and automatic turning - Electronic stop turning and automatic turning - Simple cycle input in dialog with graphical images - Contour cycles: machining and finishing, longitudinal and planar, with tapers, radii and chamfers - Drilling cycles with / without pecking - Drilling/hole pattern cycle for axial and radial centering and drilling - Free-forming cycles DIN 76 and DIN 509 Form E+F - Special free-forming - Facing - Threads cylindrical, conical, flat threads with constant or variable pitch and with suggestion for thread depth - Thread drilling cycle with chip breaking function - Thread repair - Variation possibilities within cycles - ICP interactive contour programming - Programming according to DIN 66025 - Structured programming (UNTS) - Parallel programming - Geometry input absolute or incremental - Feed rate input mm/rev or mm/min - Input of a safety zone in front of the chuck or simple stop - Graphical program simulation (line or cutting path) Simulation in single block or complete program - Oriented spindle stop with angle indication - Automatic program run optionally single block or sequence cycles (with door locking) - Tool memory for 250 tools - Comfortable tool file - Technology database with 9 material/cutting tool combinations - Assignment of cutting speed / speed and feed rate - Part program memory 1.8 Gbyte Iiedpfxoy Tzhpe Apcsg Standard accessories - Chip tray - Machine light LED and energy-saving function - Leveling elements - Main motor fan circuit, temperature-controlled - Single-chamber filter for coolant cleaning, integrated into the coolant line (40 my) - Complete documentation

Condition: excellent (used), Year of construction: 2012, Partially overhauled Heidenhain Manual Plus 620 control system Working area: Iiedpeyffigefx Apcjg Swing diameter over bed: 475 mm Swing diameter over cross slide: 260 mm Cross slide travel: 260 mm Centre distance: 1000 mm Turning length: 880 mm Main spindle drive Drive power – AC motor – 40% duty cycle: 25 kW Headstock Spindle nose DIN 55026: A6 size Spindle diameter in front bearing: 115 mm Spindle bore: 78 mm Speed range (constant V): 1 – 3000 rpm Cross slide Feed rate, cross: 0.001 – 1000 mm/min Feed rate, longitudinal and thread cutting: 0.001 – 2000 mm/min Rapid traverse, cross/longitudinal: 5/10 m/min Tailstock Quill diameter: 70 mm Quill stroke: 120 mm Quill taper: 5 MT

Condition: good (used), Year of construction: 2006, operating hours: 9,911 h, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 310 mm, rapid traverse X-axis: 75 m/min, rapid traverse Y-axis: 75 m/min, rapid traverse Z-axis: 75 m/min, nominal power (apparent): 17 kVA, total height: 2,300 mm, total length: 1,500 mm, total width: 2,600 mm, overall weight: 3,400 kg, spindle speed (max.): 30,000 rpm, spindle nose: HSK40, number of slots in tool magazine: 40, input voltage: 400 V, Equipment: documentation/manual, CNC machining center CHIRON FZ08 KS Magnum High Speed Plus (HSP) TECHNICAL CHARACTERISTICS: Iisdpfx Aex Iiw Ispcsg Year of manufacturing: 2006 CNC control : FANUC 18i-MB5 Number of axes : 7 Stroke X axis : 450 [mm] Stroke Y axis : 270 [mm] Stroke Z axis : 310 [mm] Traversing feeds X, Y and Z axes : 75000 [mm/min] Max. bar diameter in turning spindle : 32 [mm] Main spindle max. speed : 8000 [rpm] Main spindle max. power : 12 [kW] Angular A axis stroke : 360 [°] A axis indexing precision : 0.001 [°] B axis swivelling stroke : -20° / +115 [°] B axis indexing precision : 0.001 [°] Spindle type : HSK40 Max. spindle speed : 30000 [rpm] Tool changer magazin number of stations : 40 Part turnaround by robot (6th side machining) : Yes RS232 Interface : Yes Total power required : 17 [kVA] Supply voltage : 400 [V] Number of running hours : 9911 [h] Dimensions : 1500 x 2600 x 2300 [mm] Weight : 3400 [Kg] EQUIPMENT INCLUDED: x1 RENISHAW TS27R tool probe x1 spindle cooling unit x1 parts catcher x1 coolant tank x1 unit for 6th face machining (gripping system not included) x29 tool holders type HSK40 BIG KAISER x10 collets type F37 SCHAUBLIN x1 washing gun x1 3-color status light x1 maintenance manual x1 electrical diagrams manual x1 operator's manual x1 programming manual Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed Machine similar to brands such as Okamoto, ELB, GER, Tacchella, Karstens, Jones & Shipman, Jung, Favretto, Blohm. Internal and external grinding (ID/OD) also to be considered. Surface grinder, lathe, machining center, milling machine.

Condition: ready for operation (used), Hydraulic unit, consisting of an oil tank with a drive motor mounted on top, with a flanged hydraulic pump, and two valve blocks located above it. 1. Valve block, manufacturer: WANDFLUH-Hydraulik Maximum pressure: 160 bar Delivery rate: 20 l/min 2. Valve block, manufacturer: BOSCH Operating pressure: 319 bar Drive motor: 220/380 V, 1420 rpm, 2.2 kW Space requirement: 700 x 620 x 1050 mm Weight including hydraulic oil (approx. 90 l): 193 kg Iiedpfxjdz Dlij Apcog

Condition: used, Year of construction: 2018, functionality: fully functional, Heidenhain Manual Plus 620 HSCI Touch control system Swinging diameter over bed: 400 mm Swinging diameter over cross slide: 230 mm Cross slide travel: 220 mm Distance between centers: 1500 mm Turning length: 1310 mm Drive power: 16 kW Spindle head: DIN 55027 - A6 Spindle bore: 64 mm Tailstock diameter: 60 mm Tailstock travel: 140 mm Taper: MK4 Iiodpfoza Uq Nex Apceg Tool turret: Sauter, 8 x DIN 69880, diameter 30 mm Multifix B mounted on the front of the slide.

Condition: used, Year of construction: 2014, operating hours: 2,492 h, Equipment: all wheel drive, Stock no. 5805 CAT 301.7 D Mini Excavator with Quick Coupler / Extendable Dozer Blade ---- * Manufacturer: CAT * Model: 301.7 D * Year of manufacture: 2014 * Weight: 1,977 kg * Color: Yellow * Additional hydraulic connections for grab attachment * Hydraulic telescopic undercarriage * 400 mm trenching bucket * Enclosed cab * Extendable dozer blade * 4 x work lights * Quick coupler system Iiedpfx Ajy Srbdspcsg * Yanmar engine with 13.4 kW / 18 HP * Displayed operating hours: approx. 2,492 hours * Width: approx. 0.99 m * Height: approx. 2.29 m * Transport length: approx. 3.58 m Notice regarding possible errors in the listing: Despite careful preparation of this advertisement, errors may occasionally occur in the description or specifications. We accept no liability for inaccuracies, changes, or prior sale. All information is provided without guarantee. Please contact us to verify details or if you have any further questions.

Condition: ready for operation (used), Year of construction: 2011, operating hours: 70 h, travel distance X-axis: 1,100 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 510 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC350, spindle speed (max.): 10,000 rpm, spindle motor power: 18,500 W, number of axes: 3, This 3-axis POSmill E1100 was manufactured in 2011. It features a Heidenhain iTNC350 CNC control, a robust 1,100 mm X-axis travel, and a high-capacity 40-position automatic tool changer. The spindle supports speeds up to 10,000 rpm with ISO 40 tool holder and cooling. Additional features include a full enclosure, safety windows, and a 20 bar coolant system with chip management. If you are looking to get high-quality milling capabilities consider the POSmill E1100 machine we have for sale. Contact us for more information. • Prepared for 4th axis (interface prepared; compatible with Lehmann rotary table) • Table approx. 1,300 × 600 mm • CNC control: direct linear scales X/Y/Z; electronic handwheel; tool breakage monitoring Iijdpfjycuc Dex Apcjg • Spindle cooling; air blast through spindle • Tool system: ATC 40 positions; tool magazine with loading hatch; tool length measurement; tool clamping monitoring • Enclosure & safety: full machine enclosure; polycarbonate safety windows; automatic lubrication system; safety cabinet with air conditioning • Connectivity: USB interface; network connection • News spindle in 2020. New spindle has only 80 hours Additional equipment, not included • Chip conveyor • High-pressure coolant system, 20 bar with belt filter unit • Coolant flushing system • Hydraulic unit • Workpiece measuring system (25.0 HDR) • Pallet handling interface (optional) Technical Specification Taper Size ISO 40

Condition: used, fuel type: diesel, first registration: 06/2014, Year of construction: 2014, operating hours: 2,900 h, Excavator Hitachi ZX33U-5A CLR – 2,900 operating hours – air conditioning – CW 5 – quick coupler system and auxiliary lines – total weight 3,320 kg – = Further Information = Model year: 2014 Iisdpfx Apsw A Thmoceg Drive: Track Unladen weight: 3,320 kg Please contact Miguel Cubas for more information. = Company Information = We are located between Antwerp and Brussels along the A12 motorway, near the port of Antwerp. Opening hours: Monday to Friday continuously from 8:30 am to 7:00 pm.

Condition: used, Year of construction: 2011, total height: 3,000 mm, total length: 4,200 mm, total width: 2,500 mm, overall weight: 7,800 kg, POS PosMill Type C1050 – Universal Milling MachineUniversal milling machine with travel paths X 1,050 mm / Y 530 mm / Z 630 mm and table size 1,150 x 560 mm.CNC control HEIDENHAIN iTNC 530.Hydraulic system for precise movements.Equipment: Coolant system and chip conveyor.Machine with protective devices and emergency stop system. Travel X-axis: 1050 - mm Control: Heidenhain iTNC 530 Dimensions of the clamping surface: 1150 x 560 mm Travel Y-axis: 530 - mm Table length: 1,150 mm Dimensions (LxWxH) approx.: 4200 x 2500 x 3000 mm Weight approx.: 7,800 kg Travel Z-axis: 630 - mm Year of construction: 2,011 Condition: unchecked Isdsy S Nh Iopfx Apcsig Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: No