TRUCK MOUNTED CRANES

TADANO FUAN ATF70-4

Condition: good (used), Year of construction: 1980, turning diameter over bed slide: 1,040 mm, turning diameter over top slide: 710 mm, turning length: 2,000 mm, bed width: 600 mm, Optional chuck 1200 mm 2 Axis RSF Digital read out Conical turning attachment Spindle bore 130 mm Central lubrication DBC Turning Length: 2000mm Swing over bed Ø: 1040mm Swing over cross slide Ø:710mm Swing in the gap Ø: 1780mm Gjdpfx Aex Tgr Tek Usug Gap length: 1000mm Spindle bore: 130mm Bed width: 600mm Tailstock spindle Ø: 130Ø Stroke pinole: 300mm Spindle taper: 6Mk Power: 22kW Speeds / ranges: 600Rpm Feed rate X-Axis: 4000mm/min. Feed rate Z-Axis: 4000mm/min. Length: 6000mm Width: 2100mm Height: 2100mm Weight: 8300kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, maximum load weight: 67,200 kg, overall weight: 85,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpts from the equipment. Full specifications available upon request. GOOSENECK * Gooseneck in SNT design to optimize load floor length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * For tractors: 6 x 2, 6 x 4, and short 8 x 4 * Detachable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic power unit for controlling hydraulic functions, except for hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of flat lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in aluminum side boards, approx. 400 mm high, anodized * 1 plug-in aluminum rear board, approx. 400 mm high, anodized * Approx. 40 mm thick hardwood flooring above gooseneck, checker plate flooring above kingpin * 3.5 inch kingpin * Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow regulator, including bracket for hanging supply lines (Faymonville couplers) * 2 pairs of stake pockets recessed in the gooseneck, for plug-in stakes approx. 100 x 50 mm LOAD FLOOR * Extendable load floor, approx. 11,000 mm long, with rear bevel approx. 500 mm x 10° * Pneumatic locking with conical locking bolts and reinforced locking positions; supply lines are protected inside the extendable beams and automatically adjust to the respective deck length * BPW axles and suspension, 1st axle steered, 2nd axle fixed, all other axles hydro-mechanically forced steered Guedpfx Aorgzv Nsk Uog * 1st axle with electro-magnetic reverse lock via reverse gear and manual activation * Axle load capacity: 12,000 kg each * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires * Mechanical landing gears with 2-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg * Continuous and, between axles, interrupted approx. 50 mm thick hardwood floor on load deck (increases coefficient of friction) * Slotted holes for attachable and repositionable bridging elements: – at the fixed part behind the gooseneck – on the front of the load floor * 1 sliding intermediate table, approx. 500 mm wide, for the sliding tube with large cross-section, checker plate flooring, front and rear with slotted holes for attachable and repositionable bridging elements * 1 pair of recessed flat lashing rings in the front fixed part of the load floor (LC 10,000 daN) * 9 pairs of recessed lashing rings, foldable outward, in the load floor perimeter frame (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle tracking control, no installation required in the tractor * 1st axle with automatic lift axle function and start-up assist according to EU Regulation 2021/535 * Under the gooseneck and at the rear cross member, left and right, a 7-pin socket each with holder for warning signs * Factory-applied sand coating on the perimeter frame of the load floor as well as the checker plates and the transition area between load decks

Condition: refurbished (used), Year of construction: 2021, HANDTMANN PVLH-228 2021 year The machine after capital renovation. All bearings and sealings in this machine are new. 3 months warranty for parts. Godpfsrf S U Dex Ak Uoug New funnels and brake. Delivery time: 3 weeks. natural or artificial intestine kit to be agreed

Condition: good (used), Nowicki KN1-125 Bowl cutter Godpfx Aonp Nc Iek Ujug Stainless bowl cutter, 125l bowl, six blade assembly, variable speed, safety guarded lid, discharge arm, external control panel, 51Kw, 3Ph

Condition: used, Year of construction: 2010, operating hours: 11,780 h, Equipment: ABS, all wheel drive, Volvo EXCAVATOR EW140C Guodpfx Asyltr Aek Usg air conditioning 16,850 kg 91 kW Top condition

Year of construction: 2007, condition: ready for operation (used), A CNC profile drilling machine Voortman with a movable drilling cabin is available. Working height range: 30mm-1050mm, positioning speed: 40m/min, table width: 300mm, max. working width: 1800mm, support depth: 1500mm, tool stations: 5, max. travel speed: 40m/min, tool holder: SK40, drilling diameter range: 5mm-40mm, thread cutting range: M6-M30, working length: 16200mm. Documentation available. On-site inspection possible. Gusdpfx Asxp Rb Isk Usg

Year of construction: 1978, condition: used, pressure 100 t throat 380 mm Gedpfx Aslp U Dpsk Ujug stroke 400 mm power capacity 22 kW dayligth 600 mm ram surface 600x500 mm table surface area 720x600 mm weight of the machine ca. 9 t

Condition: used, mileage: 19,950 km, first registration: 11/1989, fuel type: diesel, axle configuration: 4x4, gearing type: mechanical, Year of construction: 1989, Equipment: all wheel drive, Mercedes-Benz 1428 AF 4x4 (central and rear axle locks, low-range gearing) with 7 seats Gusdpjfarx Usfx Ak Uog Water tank: 2,500 liters Pump: Metz, with a flow rate of 2,800 l/min Additional equipment: quick attack connection on the right side with a 50-meter hose Dimensions (LxWxH): 7100 x 2300 x 3000 mm Wheelbase: 3800 mm Tires: 275/70 R22.5

Condition: ready for operation (used), Year of construction: 1995, A complete stationary concrete block production plant Adler is available. Components: stationary block machine/press unit, mixer, skip/feeding unit, material hopper, conveyor belts, height conveyor, pallet circulation system, pallet transport, palletizer, stacking and destacking units, strapping system, control system, hydraulic unit, silo, material feeding system, dosing unit, discharge. Output: 1500 cycles/day, output: 3000 pallets/h, operation: double-pallet operation, available concrete block format X/Y/Z: 500mm/200mm/250mm. The drying racks are made of wood and can no longer be used. The system has not been operated for 20 years and requires an overhaul. The system was operated from 1995 to 2005. Documentation available. An on-site inspection is possible. The system is located in Portugal. Gusdpfszh Ng Tex Ak Uog

Condition: used, Year of construction: 1982, Technical details: faceplate diameter: 2600 mm turning diameter over support: 2500 mm turning length: - mm centre distance: 1600 mm turning diameter over bed: 2900 mm spindle bore: 100 mm revolution per minute: gear steps U/min feed range: Überdrehen 0,12-31,5 Plandrehen 0,12-45 mm/min bed guideways length: 2900 mm max. workpiece weight between centres: 400.000 kgs total power requirement: 45 kW weight of the machine ca.: alle Komponenten zusammen: ca. 29,0 t machine dimensions LxWxH: 5.2 x 5,0 x 3,1 m 3-way measuring system with digital display RSF electronics Control panel Cooling unit for Rittal electric cabinet * Godpfx Aswtctyjk Ujug