Diesel Forklift

SveTruck 32120-50

Condition: good (used), machine/vehicle number: 3513, Year of construction: 2009, load capacity: 32,000 kg, lifting height: 5,500 mm, mast type: duplex, fork carriage width: 300 mm, fork length: 2,400 mm, total length: 6,900 mm, total width: 3,700 mm, operation weight: 46,000 kg, additional equipment features: Engine heater, Centralized greasing system, SveTruck 32120-50 from Uniktruck Wheel type – Drive wheel: Pneumatic Wheel type – Steering wheel: Pneumatic Wheel size – Drive wheel: 16.00x25 Kedpfx Absyuil Ronodr Wheel size – Steering wheel: 16.00x25

Condition: new, The unit is new, complete including controls, diesel tank, exhaust and batteries. Description Model: NWR35 Ricardo Motor Newpower generator generator set Continuous power: 24 kW / 30 kVA Maximum power: 26kW / 33kVA Engine : Kofo RIcardo N4100DS-30, 4 cylinder water-cooled Connection: circuit breaker Frequency : 50 Hz. Voltage: 400/230 V including mechanical speed control, AVR, battery charger, galvanized soundproofing, cooling water heater, Control unit: Comap AMF8, mains feed Dimensions: 2180x960x1260 mm Weight: approx. 900kg Diesel tank: 102 L. Kdjdpfjkh Hbpex Abner At 100% load: 7.15 L/h At 75% load : 5.8 L/h At 50% load : 3.7 L/h Mains monitoring, mains feed, soundproofed Ready for immediate use. Net price: €5,208, gross price: €6,197 additional costs 63A automatic switch: € 500 100A automatic switch: € 620 Shipment: - Worldwide transport including unloading is possible for an extra charge - In order to be able to quote an exact freight price, please send us a request with your data and your complete address -Available from April

Condition: good (used), machine/vehicle number: 1756, Year of construction: 2008, load capacity: 32,000 kg, lifting height: 4,520 mm, mast type: duplex, fork carriage width: 300 mm, fork length: 2,400 mm, total length: 7,100 mm, total width: 3,700 mm, operation weight: 39,900 kg, additional equipment features: Centralized greasing system, Equipment: lighting, SveTruck 32120-50 from Uniktruck Wheel type – Drive wheel: Pneumatic Wheel type – Steering wheel: Pneumatic Wheel size – Drive wheel: 16.00x25 Kdodpfx Aoyuhhqebnjr Wheel size – Steering wheel: 16.00x25

Condition: used, material width 300 mm coil weight 3 t material thickness 2 - 4 mm Straightener, 7 rolls, Make. Schleicher, Type RM 6-95/160 - band width 300 mm - band thickness 2 – 4 mm - cross cut 1200 mm² - voltage 220/380 V 50 Hz - total power requirement 3,1 kW coiler with press roll, Make Schleicher, Type H-3 - Coil weight 3 t Kdodpfscdrmmsx Abner - Band width 400 mm - voltage 220/380 V 50 Hz - total power requirement 3,92 kW without control

Year of construction: 2016, condition: ready for operation (used), The Coiltech Decoiler Straightener Feeder System is a compact press feeding system. Belt width: 600mm, material thickness: up to 6.5mm, straightening rollers: 7x115mm, decoiler tonnage: 6000kg, diameter (inner), min-max: 470-520mm. Connected load: 7.5kW, with documentation. Kodpfxji El Uco Abnodr

Condition: used, 72″ x .187″ x 50,000Lb Paxson Loop Slitting Line Make: Paxson Material Width: 12″ – 72″ (Uncoiler 60″) Material Width: .010″ – .187″ Coil Weight: 50,000Lb Coil ID: 20″ – 24″ Coil OD: 72″ Speed: 500 /1000 fpm Direction: Right to Left Material Strength: 40,000 yield / 50,000 psi shear Material: CR, HR, Galvanized Entry Transfer Cart Entry Coil Car Mandrel Uncoiler Powered Hold-Down Roll Powered Expansion Sliding Base Kdedpjihf Ufefx Abner Hydraulic Peeling Table Driven Pinch Rolls

Year of construction: 1989, condition: good (used), strip width: max. 1.840 mm strip thickness: 0,3 – 3 mm Kedpfog Iih Nex Abnsdr blade shaft Ø: 224 mm blade Ø: 350 mm

Condition: used, Technical details: plate width: 800 mm coil weight: 12 t sheet width - max.: 800 mm sheet width - min.: 300 mm thickness of strip/band: max. 5,0 mm band speed: 4,5 / 25 m/min work height max.: 1700 mm Payload: 12,0 to (Coil) Weight approx.: 7,3 + 6,62 t dimensions of coil: 3,2 x 1,9 x 2,7 m dimension machine xH: 2,5 x 2,6 x 2,45 m Decoiler with loading device Can optionally be sold together with stock no. 0100571. straightening unit: Infeed rollers: 2 x Ø 144 x 850mm Straightening rolls: 3 x bottom rolls, rigid, Ø 100 x 850mm, 30mm adjustable 3 x top rollers, Ø 110 x 850mm; 30 mm adjustable Coil unwinding machine: Outer Ø 1.500mm Strip width max. 800mm Load capacity max. 12 to Clamping Ø 470 - 630 / 570 - 730mm Kdsdpfxou Ic Ave Abner Transport unit LxWxH: 1700 x 1500 x 1000mm; crosswise running, with prism support 1000 x1000mm Machine will be offered and sold with Stock no. 0100521 as a decoiling and streightening line. *

Condition: new, Year of construction: 2012, strip width: max. 600 mm strip thickness: max. 3 mm coil weight: max. 4 t coil OD: max. 1.500 mm mandrel Ø: 508 mm year: 2012 (never used) Kdedpswzu E Defx Abnsr

Year of construction: 1980, condition: good (used), strip width: 1.650/1.750 mm Kdsdpfx Asdn I Hrobnsr strip thickness: 0,4 - 3 mm coil weight: 10 t interchangeable mandrels, Ø: 304/406/610 mm