40-foot Container Cargo worthy

Supreme Turkey 40-DV

Year of construction: 2022, condition: new, This system operates in automatic mode. The transfer of pallets between production line and curing area is carried out by Finger Car. 1 operator supervises the production process via control panel equipped with 4 different monitor, pc system. Automation system software has user-friendly interface and can be translated into customer’s preferred language. Production line requires the construction of curing chambers with racks. Steam curing is recommended for working in one shift and is mandatory for working in two shifts. Transfer of production pallets with green products to the curing chambers as well as the transfer of pallets with cured products to the cubing station is carried out by automatic pallet transport system known as Finger Car. Finger car consists of lower and upper electric trolleys, which move along a set of rails built perpendicularly to the concrete block production line. The upper trolley has steel forks for grabbing and holding pallets. It transfers concrete products to the curing chambers, going inside each chamber to place pallets with wet products on racks to cure. On its way back it takes a stack of pallets with cured products and loads it into the lowerator. The price given as 1.200.000 USD includes all the machine equipments, concrete batching plant and 3000 pallet rack system. It is very special offer for August 2022! Csdpfx Asibcycob Tjhf

Condition: new, Year of construction: 2025, NEW CONTAINER / ONE WAY / Year of manufacture 2025 Cjdpfx Abowu Uuxs Tohf +Lock box +Forklift pockets Color: RAL 5010 , RAL 7016, RAL 7035, RAL 6007, RAL 9010, RAL 7042, RAL 7015

Condition: new, Year of construction: 2025, PROFESSIONAL WIRE FEEDER WITH AC SERVO MOTOR FOR LASER AND TIG WELDING Citronix professional wire feeder with servo technology - means that it uses ac servo motor for motor drive, which enables it not only to feed wire very precisely even when the speed is low, but also the ability to set the length in „mm“ for wire withdrawal, and also, after the material is cooled down, we can push it again (the smallest step 0,1 mm) Chsdpfx Ajmk S Sljb Tof This is a very important feat with laser welding, and this working method is an advantage compared to wire feeders made in the Far East, since with those machines the function of withdrawal and pushing the wire is set on time, and the consequence of this method is that the tip of the welding wire never comes back to the place where the withdrawal started. We made the Citronix wire feeder in a way that it can control not only the wire feeding process, but it can also manage (turn on and off) both the laser source and the gas magnetic valve. This is another significant difference and advantage compared to other manufacturers, because usually there is no spot welding technology in laser welding machines, so if someone wants to weld sheets in the spot welding technology, he can set the spot time and the wire feeder will control the laser source. Wire feeder has 4 operation technologies: 1. continuous welding with wire feeding; 2. continuous welding without wire feeding; 3. spot welding without wire feeding; Wire feeder has 200 memory cells – locations, if the parameters are set, they can be saved on the memory location and we can name them in any number or text combination, in order to make use easier. We also developed a foot pedal, which can be attached to the wire feeder and regulate the feeding speed. It works like a gas pedal in motor vehicles. If, for example, we set the maximal speed 10 meter per minute on the display, and press the pedal all the way, the speed will be 10 meter per minute (or the speed we set), if pressed only half way, the speed will be half of the set speed. This feat can be used if the operator remains in one place, for example if he is sitting. If this pedal isn't necessary, the wire feeder can be attached to the system in a manner to turn on-off the welding process from the button on the torch. This pedal is optional, and in case you want to order it, it is additionally charged 400 EUR. Take a look at the monitor images and see the functions – parameters that can be adjusted. Citronix wire feeder can be used not only for laser welding, but also for the TIG welding, we made a filter to prevent HF-spark. Wire thickness it can push is from 0,8-2,4 mm. At this moment, we have a menu in English, German, Hungarian, and Serbian language.

Condition: used, maximum load weight: 28,560 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 02/2023, next inspection (TÜV): 03/2026, loading space length: 12,032 mm, loading space width: 2,352 mm, loading space height: 2,698 mm, loading space volume: 68 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2023, Equipment: ABS, FLIEGL 3-axle container chassis rigid with 40 FT Highcube container First registered in 2023 Total weight (technical) 38,000 kg Empty weight of chassis 3,640 kg Empty weight of HighCube container 5,800 kg SAF axles with large disc brakes, 430 mm 1st axle LIFT AXLE, with starting aid with vehicle driving stability system Chodpjvzk Naefx Ab Tof Axle load detection Tires 6-fold 385/55 R 22.5 40 FT Highcube container right side wall can be opened as doors (multiple wings), door dimensions L 2,340 x W 2,585 mm Portal doors at the rear Dimensions i.L. (LxWxH) 12,032 x 2,352 x 2,698 mm Volume 68 cbm 25 Euro pallets Accessible with pallet truck and forklift 1-A condition RENT is the new BUYING, also available from us as a full-service rental-----

Condition: new, Year of construction: 2025, container length: 20 ft, NEW CONTAINER / ONE WAY / Year of manufacture 2025 +Lock box Chsdpfowut Nbox Ab Tjf +Forklift pockets Color: RAL 5010 , RAL 7016, RAL 7035, RAL 6007, RAL 9010, RAL 7042, RAL 7015

Condition: like new (used), Year of construction: 2024, CONTAINER TYPE: 40 ft HC DV NEW Storage Container / Shipping Container / Material Container, ONE WAY, RAL 5010, Year of Manufacture 2024 DIMENSIONS LxWxH: Chodpfx Ajxbzcmob Tsf External dimensions: 12,192 x 2,438 x 2,896 mm Internal dimensions: 12,032 x 2,348 x 2,699 mm Volume: 76.3 m³ RENTAL also available: from €3.30 net per day The main advantage of storage containers is their versatility regarding placement. Storage containers can be used stationary for extended periods or provided as short-term interim solutions for onward transport. Their construction also allows for quick repositioning when required. This makes storage containers an excellent option for flexible storage solutions. DELIVERY CONDITION: Fully operational and ready for use, wind- and waterproof Wind- and waterproof, cleaned CSC certificate (certified safety standard) New paint and modification options available on request OPTIONAL MODIFICATIONS: Paintwork in your desired color Lighting installation including wiring and socket outlets White plastic window with single sash Ventilation grilles Personnel door TRANSPORT: Shipping of containers to any region Delivery on standard truck chassis or crane vehicles We look forward to hearing from you! BIMICON Container Service Your specialist in Hamburg

Condition: ready for operation (used), functionality: fully functional, container length: 40 ft, 40-foot HighCube / sea container / XXX ✅ You always get dealer prices from us! ✅ We offer used 40-foot HighCube storage containers / sea containers. Details: - Model: 40ft-HC, storage container / sea container made of steel (used) - Condition: ◦ Wind and watertight ◦ Cargo worthy (suitable for international transport) ◦ Repaired and ready for immediate use Cjdpfx Aowu Tk Eeb Tjhf ◦ With valid CSC sticker (comparable to a TÜV sticker) - Equipment: ◦ Wooden floor Additional services: - Individual adaptations as required (e.g. conversions or specific adaptations) - Fast delivery directly to your location - Delivery & unloading possible nationwide and internationally (for an additional charge) Simply send us the zip code of the delivery address. Prices on request! We will be happy to provide you with a customized offer. For further questions or advice, please call us.

Condition: like new (used), SOUNDRAFT BROADWAY digitally controlled analogue mixing system Please check out our other listings as well. Codpfjidaauex Ab Tjhf

Condition: good (used), Year of construction: 2014, Verbruggen / Schomaker ASU 400 Saté Unit - Skewer Machine The Traditional Saté Unit is specifically designed as a standalone unit for skewering pieces of meat, fish, tofu, vegetables, or fruit onto a stick. With the ability to quickly switch between shaping plates and stick lengths, the machine can be easily adjusted for the desired product. Key specifications Up to 3800 products per hour Suitable for stick length from 70 to 200 mm Benefits Artisan-looking product Various shapes and products possible Different stick lengths possible Different types of sticks possible High capacity Short changeover time between different products Easy to clean Simple operation Manufacturer: Verbruggen / Schomaker Model: ASU 400 Year: 2014 Capacity: Up to 3.800 products per hour Voltage: 220V Electrical Power: 0,18kW Air Connection: 6 bar Chjdpov D Hf Ajfx Ab Tof Width discharge belt: 400 mm Machine Dimensions LxWxH: 2.300x1.300x1.500 mm Machine Weight: 200 kg.

Condition: used, Year of construction: 2017, 20ft sea container, converted into an office/lounge, walls and ceiling covered and insulated, front area: windows and doors with light cutouts, inside: refrigerator, sink, cupboards, table, chairs, various lashing eyes in the wall, coat hooks, etc. Electrical equipment: fuses, heating, lighting, various sockets, the special thing about it is the room-in-room concept, which makes it look like an inconspicuous container from the outside and like a thermally insulated living space from the inside, new price approx. 18,000 ¤, good condition Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we would be happy to make you an offer from our partner workshops! The vehicle can be covered with advertising and/or labeled. Our general delivery and payment terms apply. Chjdpfx Asvnnfleb Tef We would be happy to make you a financing or leasing offer for this property. Please contact us!