Electric 4-wheel forklift

Still RX 60-50

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 6,224 h, load capacity: 5,000 kg, lifting height: 5,080 mm, free lift: 1,530 mm, fuel type: electric, mast type: triplex, construction height: 2,500 mm, fork carriage width: 1,200 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Refurbished, without warranty Technical condition: Very good Front tires type: Non marking Front tires condition: 80 - 100% Rear tires type: Non marking Kdedpfsx Dn Egox Ah Njg Rear tires condition: New Battery voltage: 80V Battery capacity: 930Ah Battery manufacturer: tested with 89% remaining capacity Battery type: PzS Battery year: 2019 Battery condition: 80 - 100% Description: Overhauled, serviced and inspected according to FEM 4.004 (UVV). Completely repaired, serviced, and checked. Sideshift, fork positioner, 3rd valve, 4th valve, rear work light, front work light, cabin heater, road approval (STVZO), full cabin, safety light, joystick, windscreen wiper, LED.

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 7,792 h, load capacity: 4,000 kg, lifting height: 5,650 mm, load center: 500 mm, fuel type: gas, DGUV certified until: 11/2025, fork length: 1,600 mm, tire condition: 95 %, empty load weight: 7,183 kg, color: yellow, We are offering an absolutely top-condition forklift from Jungheinrich. In 2021, it underwent a complete 5-star refurbishment by Jungheinrich and has only run 45 hours since the overhaul. The paintwork is 100% original—there has been no respray or touch-up! The forklift has always been stored indoors and is in excellent condition. Maintenance and UVV inspection are up to date. The manual and keys are, of course, included. Last major service: October 2024 UVV valid until 10/2025 Operating hours: 7,792 (since refurbishment: 7,744) Kedpfx Ahjw N Iz Hs Nedg Model: TFG 540s SP G+E 120-565 DZ Type: LPG forklift Year of manufacture: 2012 / 5-star complete refurbishment 03/2021, equipped with Kaup fork positioner T466 Lifting capacity: 4,000 kg Lifting height: 5,650 mm Overall height: 2,640 mm Fork length: 1,600 mm Load center: 500 mm Mast: triplex with free lift Equipment: Solo-Pilot, road lighting (conforming to StVZO), LED version with 2 working lights front and rear each, front, cab roof, and rear windows Steel doors, leather seat, rear-view mirror, armrest, double auxiliary hydraulics (2 functions) Brand new Kaup fork positioner 4.8T 466B Since refurbishment, the truck has only accumulated 45 hours of operation, with all UVV and maintenance work carried out accordingly.

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 4,518 h, load capacity: 5,000 kg, lifting height: 5,980 mm, free lift: 1,830 mm, fuel type: electric, mast type: triplex, construction height: 2,800 mm, fork carriage width: 1,400 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift Kodpfx Aexv Hamjh Njdg Load center: 500 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Refurbished without warranty Technical condition: Very good Front tires type: Non-marking Front tires size: Brand new Front tires condition: New Rear tires type: Non-marking Rear tires size: Brand new Rear tires condition: New Battery voltage: 80V Battery Ah: 930Ah Battery manufacturer: tested with 96% remaining capacity Battery type: PzS Battery year: 2021 Battery condition: 80 - 100% Description: Overhauled, serviced, and inspected in accordance with FEM 4.004 (UVV). Completely repaired, serviced, and checked. Sideshift, fork positioner, 3rd valve, 4th valve, rear work lights, front work lights, heater, road approval (STVZO), full cabin, safety light, joystick.

Condition: used, Year of construction: 2018, operating hours: 11,771 h, Type of fuel: Electric Empty weight: 7.616 kg Dimensions (LxBxH): 290 x 140 x 232 cm Lifting capacity: 5.000 kg Lift height: 440 cm Clearance lift height: 153 cm Fork dimensions: 2.400 x 2.050 mm - Year: 2018 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 516329J00102 - Operating hours: 11771 - Lifting capacity: 5000kg - Lifting height: 4400mm Kodpfx Ahjxtqhpe Nsdg - Overhead clearance: 2320mm - Free lift: 1530mm - Fork length: 2400mm - Maximum fork width: 2050mm - Minimum fork width: 560mm - Number of wheels: 4 Wheels - Attachment: Fork positioner, Side-shift - Options: Heating, Full cabin, Free-lift, Work lights - Mast: Triplex - Drive: Electric - Brand/Type: Still - Battery year of construction: 2018 - Capacity: 930Ah - Battery voltage: 80V - Battery test result: 56% - Transport dimensions: 2900mm x 1400mm x 2320mm (l x w x h) - Transport weight [kg]: 7616kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Year of construction: 1992, condition: excellent (used), Used 700ton H-frame hydraulic press for sale Make: Muller Kdsdpfxshcfzke Ah Nsg Capacity (ton) : 700 Number of pistons : 2 Table dimensions ( x-y/mm) : 4000×2200 Slide dimensions ( x-y/mm) : 4000×2200 Stroke ( mm) : 1400 Light at tdc ( mm) : 1920 Cushion power ( ton ) : 400 Cushion stroke (mm) : 500

Condition: used, machine/vehicle number: 12986, Year of construction: 2014, operating hours: 11,093 h, load capacity: 4,990 kg, lifting height: 4,780 mm, free lift: 1,480 mm, load center: 600 mm, construction height: 2,500 mm, fork length: 2,400 mm, front tire size: 355/50-15NK, rear tire size: 21x8/5 NK, overall weight: 5,870 kg, enginetype: Electric, manufacturer: Still Kdsdpex Tlhgjfx Ah Nog

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2013, operating hours: 16,936 h, load capacity: 500 kg, lifting height: 2,980 mm, free lift: 150 mm, load center: 600 mm, fuel type: electric, mast type: duplex, construction height: 2,500 mm, Description STILL RX 60-50 Year of manufacture: 2013 Operating hours: 16,936 hours Load capacity: 5,000 kg Mast: Duplex mast without free lift Overall height: 2,400 mm Free lift: 150 mm Rated lift: 2,980 mm Additional hydraulics: single function (side shifter) Attachment: Side shifter Cab: Full cabin with heating Hydraulic controls: Multi-lever Seat: MSG 75 comfort seat Work lights: Front and rear Blue spots: Yes Kdodpfx Aex Tclioh Nsg Battery: Lead-acid 80V NEW Charger: included The unit is sold in technically and visually refurbished condition, complete with a valid UVV inspection and fresh maintenance. A warranty of 6 months from delivery is provided, excluding wear parts and damage caused by the customer. The equipment can be inspected and tested by appointment. Transport can also be offered optionally.

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 450x320 saw band length 4250x34x1,1 mm band speed 40 + 80 m/min table height 845 mm saw band width 34 mm total power requirement 2,2 kW weight of the machine ca. 0,985 t dimensions of the machine ca. 1,4 x 2,0 x 2,2 m Double miter band saw, hydraulic semi-automatic, DGS 350/450 HA-I · miter left + right 60° without machine conversion · 34 mm saw blade width · Large material support turntable, ball bearings · To position the saw blade guides using a very wide linear guide · Strong, robust transmission · Large chipboards · Infeed and outfeed roller Removable chip tray (disinfection) · Free-standing control panel, safe and ergonomic Kodjfgyicjpfx Ah Njdg · Storage space for tapes, consumables · Cutting pressure regulator Feed regulator · Fully hydraulic vise Preload super fast (front loading) · Material height sensor (automatic cut start detection) Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise Optimum, material-independent cutting result through fine adjustment of the saw frame by means of: *Pressure Control Valve (Cutting Pressure Force) *Feed Control Valve (Speed) *Switch with pictogram, easy and clear to use

Condition: good (used), Year of construction: 2020, operating hours: 10,713 h, load capacity: 5,000 kg, lifting height: 3,850 mm, fuel type: electric, mast type: duplex, construction height: 2,850 mm, Manufacturer + model:STILL RX 60 - 50 / 600 Mast:2W3850 ID:25011.6088 Cat.:Used Mast:2W Forks:2400 mm Lowered height:2850 mm Lifting height:3850 mm Capacity:5000 kg Year:2020 Hours:10713 hours Capacity:80 v / 930 ah Options:- LINDE steering - Duo pedal!!! - New NON marking!!! - Windshield & Rear window!!! Kdodpfex Ruaaex Ah Njg

Condition: used, Year of construction: 2015, operating hours: 15,315 h, load capacity: 4,990 kg, lifting height: 4,350 mm, free lift: 1,390 mm, fuel type: electric, mast type: triplex, construction height: 2,350 mm, fork length: 2,400 mm, total length: 3,200 mm, drive type: Elektro, construction width: 1,500 mm, Electric 4-wheel forklift Load center: 600 Fork width: 150 mm Fork thickness: 60 mm Mast type: Triplex Kdedpovdvwbofx Ah Nog Front tires type: Superelastic Front tires size: 23x10-12 Rear tires Type: Superelastic Rear tires size: 21x8-9 Battery Volt: 80V Battery Ah: 930Ah Battery year of construction: 2014 Sideshift, fork positioner, parabolic mirror, 2 additional headlights front top ZV with sideshift Meyer Rear work lights, front work lights, heating, full cab, impulse control, full free lift,

Year of construction: 2024, condition: new, Machine was installed at the customer’s site but never commissioned, NEW and with full Breton warranty. Breton GENYA Switch – 5-axis CNC bridge saw with integrated vacuum suction system and tilting table. The Breton GENYA Switch is a state-of-the-art 5-axis CNC saw system with a monolithic design for maximum precision, speed, and flexibility in stone processing. It combines automated cutting processes with an integrated vacuum suction system, enabling fully automatic handling and positioning of slabs – ideal for kitchen countertops, architectural pieces, and complex cuts. Highlights: Monoblock construction – no foundation work required, fast commissioning 5 interpolated axes – for complex geometries, angle cuts, and pockets Suction system – automatic repositioning and optimization of cutting sequence without operator intervention Exchange table, parallel set-up during main time Camera and CAD import functions – for efficient nesting and cut optimization Automatic tool changer with 10+2 tool positions -SPINDLE MOTOR ISO40 8000 RPM -Hand wheel -BLADE ALIGNMENT UNIT -VEIN MATCHING – permanent license -Linear, fixed tool magazine ISO 40 with 10+2 tool slots -Saw blade head Ø400 mm with ISO 40 tool holder -Max. saw blade Ø600 mm -AUTOMATIC LUBRICATION SYSTEM FOR GENYA -ISO 40 tool holder for milling cutters and drills -Thickness probe -Camera system -Suction system up to 500 kg Kjdswthlnspfx Ah Nodg -Automatic table changer with tilting table Including installation and training. Machine available at short notice.

Condition: used, Year of construction: 2015, operating hours: 11,610 h, Type of fuel: Electric Empty weight: 7.121 kg Dimensions (LxBxH): 290 x 140 x 280 cm Lifting capacity: 5.000 kg Lift height: 413 cm Fork dimensions: 1.150 x 2.230 mm Kdodswfn Slopfx Ah Nog - Year: 2015 - Documentation available: Yes - └ Type Documentation: User manual - CE marking present: Yes - CE certificate present: No - Serial number: 516329F00192 - Operating hours: 11610 - Lifting capacity: 5000kg - Lifting height: 4130mm - Overhead clearance: 2800mm - Free lift: 0mm - Fork length: 1150mm - Maximum fork width: 2230mm - Minimum fork width: 560mm - Number of wheels: 6 Wheels - Attachment: 4 fork spreader, Side-shift - Options: Half cabin, Work lights - Mast: Duplex - Drive: Electric - Brand/Type: Still - Battery year of construction: 2016 - Battery voltage: 80V - Transport dimensions: 2900mm x 1400mm x 2800mm (l x w x h) - Transport weight [kg]: 7121kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 516330J00044, Year of construction: 2018, operating hours: 1,265 h, load capacity: 4,990 kg, lifting height: 4,000 mm, mast type: duplex, fork length: 1,200 mm, fork width: 1,150 mm, TECHNICAL DETAILS Lifting capacity: 4,990 kg Lifting height: 4,000 mm Clearance height: 2,800 mm Fork length: 1,200 mm Maximum fork width: 1,150 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,000 mm x 1,400 mm x 2,800 mm Unladen weight: 7,726 kg Mast: Duplex Number of wheels: 4 Drive: Electric Kdodpfx Ajx Hzzioh Neg Battery Brand/Type: 80V 6PZM 930 Year of battery: 2021 Capacity: 930 Ah Battery voltage: 80 V Battery test result: 60% Operating hours: 1,265 h EQUIPMENT Side shift Non-marking tyres Work lights CE marking User manual

Condition: used, Year of construction: 1987, Heavy-duty disc sander Model making machine with electric table tilt and digital display With approximately 20 additional sanding sheets Used, excellent condition, little used Make: L.A.R. Type: LVA D800 Year of manufacture: 1987 Machine no. 87-11-2 Many accessories Right table approx. 990 mm x 400 mm Tiltable/swivel +/- 35° electric with digital display Left table approx. 990 mm x 400 mm Tiltable/swivel +/- 35° electric with digital display Double-sided Disk diameter 800 mm Ksdpfx Aswi Rn Rjh Nsdg New price approx. €20,000.00 Extraction connection D 140 mm Space required approx. 1500 mm x 1000 mm x 1600 mm Weight approx. 900 kg Storage location 97447 Gerolzhofen, free on load, unpacked Sold in as-is condition as seen No guarantee or warranty

Condition: good (used), Year of construction: 2019, operating hours: 3,276 h, load capacity: 5,000 kg, lifting height: 5,380 mm, fuel type: electric, mast type: triplex, construction height: 2,600 mm, empty load weight: 7,700 kg, mileage: 3,276 km, Electric triplex forklift Brand: Still (Germany) Year of manufacture: 2019 Capacity: 5,000 kg Lift height: 5,380 mm Overall height: 2,600 mm Option: FREELIFT Option: SIDESHIFT Only 3,276 operating hours NON MARKING tires 2019 battery with external charger Kedpsx Hyuzsfx Ah Njdg