Beam Cutting Machine

Stanztechnik Glaser GmbH AC/DT

Condition: used, sheet width 250 mm coil outside dia. 1400 mm weight max. in kg 2500 kg plate thickness 2 ... 4 mm straightening feed 2,5 ... 15 m/min coiler: expanding range mm total power requirement 1 + 4 kW weight of the machine ca. 1,8 t dimensions of the machine ca. m Lhsdjfn Aqmopfx Amaek decoiler, MHR 250/4: max. coil diameter: 1400 mm coil diameter inside: 450 - 530 mm unbraked decoiler with pressure roller straightening machine, MR 250/4: Belt infeed height: 1250 mm The system was dismantled, checked and repainted.

Condition: ready for operation (used), Year of construction: 2014, A single-girder gantry crane newly built and converted in 2014 by Teichmann is available. Load capacity: 5000kg, track center distance: 6000mm, lifting height: 6000mm, crane travel length: 3000mm, trolley: monorail underhung trolley, hoisting speed: 5m/min, trolley travel speed: 20m/min, crane travel speed: 20m/min. Documentation available. An on-site inspection is possible. Lhsdpfx Ameyv H Igjajk

Condition: refurbished (used), Year of construction: 2013, machine/vehicle number: 101705 CE, functionality: fully functional, total length: 2,290 mm, total width: 2,450 mm, total height: 1,970 mm, overall weight: 5,100 kg, Lift table punching machine; retractable bridge - Punching force 800 kN - Table dimensions 1600 x 800 mm - Weight 5100 kg - W x H x D approx. 2450 x 2290 x 1970 mm - Hydraulic oil approx. 125 l HLP 46 - Punching pad P178 NE, 10 mm thick - Special accessories: electrically adjustable support legs - Triggering via button or single-cycle safety light curtain - Technically inspected and fully overhauled - Condition as new - Colour RAL 7035 grey Lhedpfx Aex Nvtromajk - Without hydraulic oil

Condition: good (used), Technical data of the pallet rack uprights: Shelving system: Mecalux Included in delivery: 01x pallet rack upright, used Material color: blue Frame type: M-81 Frame profile: 80 x 70 x 2,00 mm Incl. cross and diagonal braces, base plates The stands are pre-assembled ( screwed truss ) 8.000 mm high 1.100 mm deep Lhodpfx Asmmcd Nomask Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A desired transport or shipment of this or a dispatch of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: excellent (used), machine/vehicle number: 70218, Equipment / Additional information: Various tools Further MACHINERY / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST Lhodspithaopfx Amaek

Condition: used, Year of construction: 1980, sheet width 2050 mm plate thickness 8 mm electrical . weight of the machine ca. 6,3 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. Lhsdpfxekxhrho Amaok +++++

Condition: reconditioned (used), functionality: fully functional, Sandt 530 CE Bridge Cutting Machine Hydraulic press with a traveling beam (front/rear movement) designed for cutting various materials using a die (leather, foam, cork, etc.). Very fast and powerful – during operation, the machine is fully automatic and does not require supervision (only the tool and the material being cut are of concern). Technical specifications: Lhodpfx Asyryzdomajk - Pressing force: 63 tons - Working area: 1200 mm x 650 mm - Maximum stroke: 160 mm - Maximum daylight between beam and table: 190 mm The machine is equipped with a user-friendly touchscreen control panel featuring the following functions: - Tool zero-point detection - Force adjustment - Table height adjustment after cutting - Automatic / manual operation - Machine error diagnostics The machine is in excellent technical condition after a complete overhaul, which included: - Replacement of all seals - Replacement of all bearings and traveling rollers - Comprehensive servicing of the hydraulic and mechanical systems - Complete redesign and installation of the electrical system, including safety barriers, safety relays, and PLC panel - Painting and maintenance Supplied with the machine: Original manufacturer’s documentation, wiring diagram of the new electrical installation, and CE Declaration of Conformity. Price available on request. Assistance with transport arrangements available.

Year of construction: 1997, condition: excellent (used), functionality: fully functional, machine/vehicle number: 052302303, Bobst Easypress 142, for the format 102x142cm to carry out models, test punching, preparation work for the production machine. excellent condition, year of construction 1997 Lhedjuk I Nxspfx Amask

Condition: used, Year of construction: 2018, SAROPACKER T450 + WS560A Ljdeycfx Ajpfx Amaehk The SAROPACKER T450 and WS560A are semi-automatic shrink wrapping machines designed to combine the sealing and shrinking processes into a single, efficient operation. These machines are designed to increase packaging productivity by incorporating an automatic closing function and enabling efficient product removal, which can significantly boost output compared to manual wrapping methods. Both machines feature robust main bodies with ventilation slots to ensure adequate cooling during operation. They are mounted on sturdy legs with casters, allowing for easy mobility and repositioning within the workspace. The SAROPACKER T450 features a control panel with a digital display and an emergency stop switch, providing straightforward operation and safety controls. Similarly, the WS560A model is equipped with a control panel featuring emergency stop and start buttons for user convenience and safety. The WS560A model also features a conveyor belt with a blue surface to facilitate smooth product handling during the packaging process. Additionally, there is a roll holder for shrink film located beneath the machine, which supports continuous film feeding. These machines are displayed in an industrial warehouse setting and appear clean and well-maintained. They are suitable for companies looking to improve packaging efficiency with reliable semi-automatic shrink-wrapping equipment. Please note that the machines are offered “as is” at the location.

Condition: like new (used), functionality: fully functional, Year of construction: 2022, Load capacity: 800 kg Lhedexlg Tlopfx Amajk Span: 5740 mm Portal height: 4700 mm Clear width: 5500 mm Wheelbase: 3000 mm Overall height: 5100 mm with electric hoist ELEKTROLIFT, year of manufacture 2022: Lifting capacity: 800 kg Lifting speed: 6 m/min Fine lift: 1.5 m/min