Height-adjustable double-beam gantry crane

STAHL-SCHILLING 1461550 5 m x 1,5 T

Condition: excellent (used), Year of construction: 2008, operating hours: 56,000 h, For sale: Arburg 570-2000-800 injection moulding machine, year 2008. In very good technical and visual condition, operates very quietly, no oil leaks. Selogic control system. Bimetallic injection unit, 45 mm diameter. 1 x air, 2 x hydraulic core, robot interface. The machine is sold without material or colour additive feeders. Kdedpoukirbefx Ag Aow

Condition: ready for operation (used), Load capacity: 5000kg. Kedpjt H Rfbjfx Ag Aedw

Condition: new, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Load circuits: 1 or 2 as standard Temperature range: - 45°C to +130°C Medium: water / glycol mixture Dimensions LxWxH (without connections) : 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300kg 2-circuit: approx. 1500kg *HIGHLIGHTS EQUIPMENT: -Controls: Temperature control (standard) -Control via SPS with touch screen -Analogue and digital interfaces -Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) -Heating control via solid-state relay (SSR) -Flow measurement in the internal circuit for flow monitoring (INFO: If the water/glycol mixture is incorrect, the system automatically warns and switches off in the next step) -Pressure-controlled cooling water regulator (INFO: Much more accurate than temperature controls) Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metal) (non-ferrous metal-free optional) All medium-carrying components and piping insulated for low-temperature application -Water-cooled condenser (air-cooled on request). Kdodpsg Ezarofx Ag Aew *OPTIONS: -flow rate control: up to 100l/min, >4 l/min +/- 5% of measured value -Pressure control: 0.5 to 4.5 bar (control range) -compressed air monitoring -test piece emptying by means of compressed air - Cooling water monitoring -Limitation of inlet pressure -Other special options available on request and after technical inspection Visit our website for more details or for other performance classes. *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: used, Price: On request Overhead crane Abus Lifting capacity: 6300kg Lifting height: 7500mm Span: 19000mm Total crane weight: +/- 4000kg Be disassembled and prepared for transport by us. - Documentation available: No Financial information VAT: The price shown is exclusive of VAT Kdjdpfx Aswh Niqeg Aow VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, machine/vehicle number: 11415, Rotor diameter: 260 mm Rotor width: 260 mm Kdjdpfxjghgl Is Ag Asw 3-blade rotor, 2 rows of stator blades Inlet cross-section approx. 260 x 260 mm Drive motor 5.5 kW Grinding mill with built-in feeder for bar stock. Weight approx. 500 kg

Condition: good (used), Type Luxor LS80 Kdedpfx Aowalxleg Ajw Series No. 08 020 044/07 0135 Dry air quantity 80 m³ /h Connected load Max 10.2 kW Heating power 6.5 kW

Condition: good (used), Year of construction: 2010, Arburg 570 H 2000-400 (2010) Clamping force: 200 t Screw diameter: 35 mm Shot weight: 141 g Distance between tie bars V: 570 mm Distance between tie bars H: 570 mm Shot volume: 154 cm3 Screw stroke: 160 mm Injection pressure: 2000 bar Type: Horizontal Drive: Hybrid Equipment: Thermoplastics cylinder cpl. 35 mm high-wear resistance Drive unit w. 11 kW motor and 21.4 l/min capacity Kdedpfx Aswpkfcsg Aew SELOGICA 'direct' controller Air blast system 1 with pressure reducer Interface for robot system (EUROMAP 67), 50-pin AED - electrom. dosage drive 9 electr. heating control circuits for mould heating Interface for colouring device 8 free cooling circuits manually adjustable Position-regulated screw

Year of construction: 1978, condition: used, machine/vehicle number: NBGMAN 2, Technical data: 1 Abus VS column slewing crane NL 1000 KG Payload at full radius 1000 KG / 1 ton payload Height: approx. 3.65m, UK boom: approx. 3.27m Ksdpfx Agor Igtke Aodw Projection: approx. 5m, hook height: approx. 2.75m Weight completely approx. 1000 kg including 1000KG Abus GM chain hoist (BJ2008) with floor control (2 lifting speeds) Connection to 400V 16A, swivel range 360° Test book is available Crane is dismantled and available immediately Item location is 75053 Gondelsheim Only the crane system shown in the pictures is sold Very good condition, see pictures Shipping by courier or collection by appointment

Condition: used, functionality: fully functional, Year of construction: 1997, machine/vehicle number: 2114003, overall weight: 667 kg, total height: 3,600 mm, total width: 4,170 mm, load capacity: 3,000 kg, operating hours: 500 h, stroke length: 3,000 mm, Equipment: CE marking, Mobile PFAFF Gantry Crane 3 Tons with PFEIFER 3 Ton Chain Hoist Gantry Crane Type: 2114003 Test Number: 2114003 Load Capacity: 3 tons Year of Manufacture: 1997 Overall Height: 3600 mm Clear Height: 3360 mm (without chain hoist) Kjdpfx Agexdnuzs Aedw Hook Height: approx. 2700 mm (with chain hoist) Overall Width: 4170 mm Clear Width: 3500 mm Total Weight: approx. 667 kg (Heaviest component = upper I-beam with trolley = combined 240 kg) Gantry Crane in good condition (robust steel construction). Chain Hoist in very good condition. PFEIFER chain hoist 3 tons – a high-quality manual chain hoist, year of manufacture 2008. The gantry crane is suitable for: Workshop, industrial use, maintenance, machine transport, and machine relocation. Ideal for plastic injection moulding machines, for mould changes, and for maintenance purposes. Suitable for loading and unloading trucks (with heavy loads). The gantry crane is equipped with wheels (wheels are lockable). The entire crane can be easily moved by one person. Suitable for both indoor and outdoor use. Quick and easy assembly and disassembly. Can be assembled by two people. The crane height can be lowered for transport (via 2 winches on the columns). This facilitates easier transport of the crane, even through low doors and building sections. Delivery: Price ex works. Transport can be organized upon request. Inspection is possible. The crane is immediately available. Price: ex works Payment: Cash on collection or advance payment. Delivery: Shipping by freight carrier is possible. Self-collection is possible. Terms of delivery: We deliver according to Machineseeker standard contract, standard purchase agreement for used machinery by Machineseeker. The standard contract can be downloaded from Machineseeker. Delivery time: immediately available.

Year of construction: 2009, condition: used, BANG CRANE LIFTING BOOM CAPACITY 3.2t ARM LENGHT 5000mm ARM LENGHT OF STROKE 4000mm Kodpfowar Dbsx Ag Ajdw MADE IN GERMANY