Dosing system incl. suction lance & pump

Sera R 411 W

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, Separate control for main drive and film transport. Siemens S7 control system. Siemens touch display. Photoelectric control of film transport. Cross and longitudinal heat sealing. Film adhesive table. Side folding unit. The machine is now equipped with the latest Siemens S7 control system! See video: youtube: VP220 packaging machine, shorts Gbsdpfxevk Rv Se Agbog

Condition: used, Year of construction: 2018, Overview The ALWID-KRONE-HV is a semi-automatic filling machine working with high vacuum. This model is suitable for filling still media into dimensionally stable containers. Many bottle shapes and sizes can be used, no format parts required. The filling level is set directly on the valve, so it remains constant regardless of the bottle volume. Vacuum level adjustable. Tech Specs: Filling points: 2 Filling valve diameter: 13 mm Suitable for filling highly viscous media Fields of application: food, beverage, pharmaceutical and chemical industry Gedpfxjl Hx Dbo Agbebg

Condition: used, Year of construction: 2022, Overview  The filling machine Flowmeters 8 was built in 2022 by Polish manufacturer Perunpack. The machine was only tested, is still under power and can be viewed in person at any time.  Technical Details  Capacity: 800-1000 bottles per hour for the 5 l format Machine can fill containers from 150 ml to 6000 ml. Number of filling stations: 8  Diameter of fillers: 16 mm Machine can fill thick products and typical water  Measurement system is based on Keyence flow meters, special flow meters for dosing machines Machine is equipped with a pump with an elastic rotor that doses the medium into a pressure tank and then onto the fillers. Entire machine is made of 304 stainless steel Siemens control system. Filling from the bottom of the container. Lowering and raising the boom with fillers using a servomotor    Gbedjrziuyopfx Agbeg

Condition: good (used), Built in 1996 Gbsdpfx Asd Tnh Ijgbog

Condition: used, maximum load weight: 31,420 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 01/2023, next inspection (TÜV): 01/2026, loading space volume: 32 m³, total width: 2,550 mm, total height: 3,750 mm, Year of construction: 2023, Equipment: ABS, 3-axle KA?SSBOHRER food pressure tank 3-chamber 32,000 liters with diesel heating and UNIBLOCK pump First registered 01/ 2023, as good as new Fifth wheel height approx. 1,180 mm Empty weight approx. 7,580 kg VA tank AISI 304 3-chamber with division 12,500 / 7,500 / 12,000 liters Insulation 100 mm glass wool, jacket sheets stainless steel mirror sheet, end floor GRP Pneumatic bottom valves DN80 3 INDIVIDUAL OUTLETS insulated, ending in the rear cabinet with collector 3 = 1 UNIBLOCK food pump type 551M2 stainless steel, electric motor 7.5 kW, with frequency converter Tank diameter 2,000 mm Test foot pressure 3.0 bar Operating pressure 2.0 bar Gjdpfx Agep R Drgsbobg 3x dome cover DN 500 with overflow box Stainless steel cleaning/air line DN50 with microfilter Diesel tank heater EBERSACHER Hydronic 30 kW Stainless steel hose pipes left and right, length approx. 6 meters Chassis stainless steel BPW axles with large disc brakes, 430 mm 1st axle LIFT AXLE KNORR Trailer EBS with stability program RSS Air tank aluminum Tires 6-fold 385/65 R 22.5 BRIDGESTONE Aluminum rims RENT is the new BUYING, also available immediately with us in full-service rental-----

Condition: used, Year of construction: 2008, Capacity: 360 Bo/h Filling points: 6 pieces Voltage: 230 V Compressed air: min. 6 bar Length: 1590 mm Width: 700 mm Height: 1875 mm Formats: 0.33 L, 0.50 L, 0.7 L, 0.75 L, 1.0 L, 2.0 L, 3.0 L, 5.0 L Gedpfx Aevcqhrjgbsbg Base construction: Steel rack Features: inlcuding add-on parts, filling programm modifiable

Condition: used, LECO LM - 100 AT Small load and micro hardness tester Year of construction: 2010 Test force ranges from 0.001 - 2 kgf Manual or automatic turret with up to 4 objectives and 2 test diamonds simultaneously PC is included in the scope of delivery --> Software could not be tested as the graphics card is missing. You are welcome to come by for a viewing. We are happy to arrange a cost-effective shipping company for you. organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Godpfxsrtn D Ie Agbebg Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Year of construction: 2001, condition: used, 1 station auger fillingmachine Make: Bouwpaco Gbsdpfog Du Thjx Agbsg Type: Semi-automatic 1-head auger dosing machine Model: BPS37SA Capacity: 1.500 filling/hr, depends on volume and product Frame: Steel/ stainles steel electric: 380 Volt – 50 Hz Dimensions L x W x H = 1.000 x 1.100 x 2.000 mm Features: electric steering with timer for adjustment filling volume pneumatic valve with food safe seal on filling nozzle to avoid dripping. product funnel with mixer as-is or adjusted to customer needs

Condition: new, Year of construction: 2024, functionality: fully functional, New filling machine suitable for dispensing liquids. Suitable for: - Milk - Water - Alcohol - Disinfectant - Etc. This is a very robust machine that runs on air and 220V power—plug and play! Ideally suited for filling small batches. Only a very small compressor is required to operate the machine, and one can be supplied if desired. We recommend a minimum compressor size of 12L. Gbsdorivxcspfx Agbsg The filling machine comes with a 1000ml cylinder, allowing a maximum of 1000ml to be dispensed per cycle. By running multiple cycles, larger volumes can also be filled. For example, to fill 2500ml, you can run two cycles of 1250ml each. The smallest fill per stroke is 100ml, and any volume between 100ml and 1000ml can be achieved in a single cycle. We also offer models equipped with cylinders that can fill up to 5000ml per stroke. Equipped with a suction hose, enabling the machine to draw product directly from a drum or IBC. The machine includes both a foot pedal and an automatic mode. In automatic mode, continuous filling is possible, making it easy and efficient to process larger quantities. The foot pedal allows batch filling at your own pace. Depending on the operator and the fill volume, the machine is capable of filling between 15-25 units per minute, making it very fast and efficient. The machine weighs approximately 15/20kg and can easily be placed on a table. Constructed entirely from stainless steel, this is a very high-quality machine. For any questions, please email us. We are happy to assist you with this or other machines. We also supply a labelling machine that makes an excellent combination with the filling machine. We strive to respond to your inquiries within 24 hours. Of course, you can also reach us by phone. We are available on working days from 09:00 to 17:00.

Condition: used, Used filling line for water for PET containers 5L 800bph This used filling line for water for PET containers 5L 800bph provides a complete solution for processing 5-liter PET bottles, both round and square. Specijalka from Serbia manufactured the line in 2006. Although the owner disconnected it eight years ago, they confirm that it remains in proper condition. Furthermore, you can inspect the line in dry cycle mode. Technical specifications of the filling line Godpfxjwr T E De Agbebg The used filling line for water for PET containers 5L 800bph reaches a nominal output of 800 bottles per hour with 5.0-liter containers. Specifically, the system includes a 10-valve rinser, an 8-valve filler, and a 4-head capper, all integrated in a monoblock. Additionally, a cold-glue labeler applies paper labels. As a result, the setup handles rinsing, filling, capping, and labeling in a compact layout. PET bottle production unit In addition to the filling line, this offer includes a semi-automatic PET bottle blower built in 2004. The machine uses two-cavity molds and can produce 800 bottles per hour at 0.5 liters, 600 bottles per hour at 1.5 liters, and 400 bottles per hour at 5 liters. Notably, the system uses water cooling to maintain operational price includes molds for 0.5-liter round bottles and 5-liter square bottles. Consequently, this unit complements the filling line perfectly and allows in-house preform blowing. High-performance compressor for blowing To support the above components, a BOGE compressor from Germany (2006) is also available. It delivers 11 kilowatts of power, 35 bar of pressure, and a flow rate of 1290 liters per minute. Moreover, the system includes a 1000-liter air tank rated for 40 bar. The unit has only logged 500 operating hours. Thus, it remains in excellent mechanical condition. Importantly, this component ensures adequate air supply for blowing PET bottles reliably and efficiently. Technical conclusion In summary, this used filling line for water for PET containers 5L 800bph enables small to medium-sized producers to manage the complete bottling process autonomously. Specifically, the line handles rinsing, filling, capping, and labeling. Meanwhile, the included blower and compressor provide the necessary infrastructure to blow bottles from preforms. Therefore, producers can oversee every phase of water bottling from bottle production to final packaging.