Round corner hardcover casemaker

Sentian WY-450J

Condition: excellent (used), Year of construction: 2006, Collating machine with a sewing, folding and trimming module manufactured by the renowned C.P. Bourg company. Year of production 2006 in the following configuration: Collating Tower BST D+ The collator is a very versatile device for collating many types of paper in a wide range of formats. The sheets are fed by suction belts rather than rollers, which eliminates the possibility of leaving marks on the paper. The suction and blowing force is adjustable without the need to interrupt the operation of the device. The machine is controlled from a touch panel. Specifications: Format range: min. 115 x 200 mm; max. 350 x 520 mm Speed range: 9,000 cycles/hour (10 x 80 g/m² A4 sheets fed per shaker) 5,500 cycles/hour - pick-up per stacker Paper weight: 50 – 250 g/m² Pile height: up to 5 cm Machine dimensions - main tower: 93 x 73 x 200 cm (length x width x height) Weight: 360 kg The SBM 4 unit has a modular design and consists of the following parts: AGR T stitching machine • two Hohner sewing heads • quick adjustment of the position of the heads • block or saddle stitching • Regular staples • Wheels for quick sliding • Work in line or as a separate unit Specifications: Format range: min. 117 x 200 mm, max. 320 x 450 mm (block sewing) max. 320 x 500 mm (saddle stitching) Paper weight: 60 - 250 g/m² Maximum thickness of the stitched fold: 6,35 mm Capacity: 3,000 trains per hour Dimensions: 55 cm x 60 cm x 110 cm Weight: 114 kg PA T Folding Machine • Automatic synchronization with collating tower and stitching machine speeds • In-line or off-line operation in combination with an AGR T stitcher Specifications: Format range: min. 117 x 200 mm, max. 320 x 500 mm Maximum quantity of folded material: 22 sheets 80 g/m² Capacity: 3,000 products per hour Dimensions: 60 cm x 60 cm x 73 cm Weight: 134 kg Lasdpfsrq Havex Affsk TR T Knife Automatic synchronization with colalting tower speeds, stitchers and folding machines, waste container. Specifications: Cropped brochure size range: min. 117 x 100 mm, max. 320 x 250 mm Paper weight: 60 - 250 g/m² Maximum trimmed quantity: 44 sheets 80 g/m² Capacity: 3,000 trains per hour Dimensions: 150 cm x 60 cm x 82 cm Weight: 170 kg SBM Equipment Counter of ready-made sets. A function that throws assemblies with an error without interrupting the operation. Two-knife cutting system with exceptional durability. Reinforced 4-roller folding system. Make adjustments to settings without interrupting your working.

Condition: used, Used C.P. Bourg BB3002 Single-Clamp Perfect Binder / EVA The C.P. Bourg BB3002 is a professional perfect binder for producing softcover books and brochures. This robust and reliable model is ideal for medium to large print runs in printing and binding shops. Key features: - Uses EVA hot melt adhesive for strong and durable binding - Cover feeder station for automatic cover feeding - Precise milling unit for optimal glue penetration - Glue application system with side gluing for increased stability - Touchscreen control panel for easy setup and operation - Memory function for up to 50 recurring jobs - Automatic format adjustment for quick changeovers - Integrated cooling section for fast curing Technical specifications: - Production speed: Up to 600 books/hour - Book block thickness: 1 - 60 mm - Book format: max. 320 x 380 mm, min. 100 x 100 mm - Cover weight: 80 - 300 g/m² - Cover magazine capacity: 80 mm - Book block paper: 60 - 160 g/m² - Milling depth adjustable between 0 and 3 mm - Glue type: EVA hot melt - Glue temperature: Adjustable from 130°C to 180°C Lasdsu Srpgepfx Affjk - Electrical connection: 400V, 3 phases, 50 Hz - Compressed air connection: 6 bar - Dimensions (L x W x H): 2950 x 1135 x 1370 mm - Weight: approx. 1100 kg All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Year of construction: 2025, condition: new, SEMI AUTOMATIC PASTING MACHINE MODEL; MAGRAFKA-100 Laedpfx Aognlv Deffek YEAR; 2025

Condition: excellent (used), Year of construction: 2016, operating hours: 27 h, SBL 1060 SE Year: 2016 Sheet feeder: Manual non-stop pile feeder Material range: Paper and board from 470 × 350 mm to 1060 × 760 mm Max cutting format: 1050 × 740 mm Min sheet size: 470 × 350 mm Max sheet size: 1060 × 760 mm Max cutting pressure: 300 tons Material thickness: 0.1 – 2 mm (corrugated/laminated max 4 mm) Min gripper margin: 9.5 mm Ledpfx Aewypp Ieffjak Max inside chase size: 1155 × 852 mm Cutting plate size: 1076 × 756 mm Max speed: 8,000 sheets/hour Power consumption: Total 32 kW (22 kW + 10 kW for lower plate heating) Machine dimensions (L×W×H): 5,900 × 5,700 × 2,615 mm Max pile height – feeder (with pallet): 1,750 mm Max pile height – delivery (with pallet): 1,450 mm Feeder Section - Pneumatic feeder table - Non-stop manual feeder system - Anti-static system - Pre-pile device - Manual suction group adjustment - Micrometric suction adjustment - Motorized side pile adjustment - Suction belt feeder table - High-pressure lubrication pump - 2 pneumatic side register guides - Electronic control of front and side register Cutting/Embossing Section - Automatic pressure adjustment up to 300 tons - Preparation and introduction table for die frames in platen - 2 quick-lock die chase frames with bottom plate - Pneumatic locking of the chase and lower supporting plate - Centerline System - Micrometric system - Heated lower support plate (24 mm) - Cutting plate: 4 mm - Compensation plate: 3 mm - Archiveable 1 mm thin cutting plate Stripping Section - Quick lock for upper and central stripper frames - 2 standard upper stripper frames - 2 standard lower stripper frames - Double accessory kit for lower stripper prep (pins, bars, clamps, etc.) Delivery Section - High-pile automatic non-stop delivery with conveyor - Guillotine for automatic removal of gripper margin waste - Sheet deceleration device - Tab insertion device

Year of construction: 1997, condition: ready for operation (used), Built in 1997 Lodpfjdxtlxex Affjak Size max 370 x 370 mm min 100 x 100 mm Speed max 100 c/min Weight 250 kg (approx.)

Condition: good (used), Year of construction 1997 Very good condition Laedjumxa Hjpfx Affek Uses wires on spools with diameters from 1/4” to 1” for a maximum binding thickness of 24 mm. Maximum binding length: 420 mm. Minimum binding length: 50 mm. Each diameter uses dedicated binding tools. Machine speed is over 1500 cycles per hour.

Condition: ready for operation (used), Baler Hsm 155 VL Bale dimensions L x W x H: 1100 x 700 x 700 - 950 mm Bale weight: 2000 - 250 kg (Cardboard) Technical data: L x W x H: 1470 x 940 x 2259 / 2439 mm Weight: 950 kg Pressure force 16 tons Power supply: 400 V (three phases) Motor power: 4 kW Bale ejector Hsm 155.1 VL baler pressure force 18 tons Ljdpfxera Nrme Affjak Price of Hsm 155.1 VL baler - 2600eur Hsm 155.2 vl baler pressure force 16 tons Price of hsm 155.2 vl baler - 2800eur

Condition: excellent (used), functionality: fully functional, stack height: 100 mm, type of input current: three-phase, input voltage: 400 V, overall weight: 140 kg, Professional Double Corner rounding machine, solid construction, weight 14kg, easy to adjust, cut two corners in one pass, Lasdpfxov T S Ubs Affsk geared brake motor, 3 phase 400V. Machine is in a very good working condition.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: F-500, working width: 530 mm, type of input current: AC, input voltage: 400 V, overall weight: 200 kg, space requirement height: 1,070 mm, space requirement length: 1,100 mm, space requirement width: 710 mm, input current: 15 A, year of last overhaul: 2024, input frequency: 50 Hz, empty load weight: 200 kg, cutting length (max.): 530 mm, product width (min.): 530 mm, Electric Punching Machine 530 mm. maximum punching width. Complete with 3:1 punching tools for books. Other punching specifications are available, such as 2:1 and spiral coils. POA. Maximum punching thickness per stroke: 2.5mm. Maximum output: up to 1,000 punching per hour, depending on materials used and skills of the operator. Power: 400v 3 phase 50/60 Hz Dimensions: H 1070 x D 710 x L 1100 mm Laoderzuf Djpfx Affjk Weight:195 Kg nett

Year of construction: 1982, condition: good (used), machine/vehicle number: 14320, Vertical Baling Press Ledpfxeiuky Ij Affoak