Tipper semitrailer

SCHWARZMÜLLER Alu-Mulde_ Stahl-Boden_ 24m³_ BPW_TÜV 01/27

Condition: used, Year of construction: 2020, functionality: unexamined, total height: 6,400 mm, total width: 4,500 mm, total length: 3,800 mm, operating speed: 110 mm/s, reverse speed: 180 mm/s, distance table to ram: 1,500 mm, We are offering here a new build of the machine shown. The machine was put into operation in 2020 and can be inspected by the customer. Technical data: Press force T 800 Opening force T 80 Motor power KW 55/75 + 55/75 Piston stroke 1000mm Rapid pre-fill speed mm/s 110 Working speed mm/s 6 Return speed mm/s 180 Guide diameter mm 250 Max pressure Bar 250 Useful table area mm 3,500 x 2,000 Lower table displacement mm 2000 Between columns mm 2,000 Open height mm 1500 Total front mm 3800 Total side mm 4500 Total height mm 6400 Weight kg 134,600 The MV-800E/NC-SINCRO press was specially developed for the adjustment and testing of molds, dies, and stamps. The 4 columns with 250 mm diameter made of C45E steel were specially manufactured for high stress. It features an optimized hydraulic system with a pressure of up to 250 bar, ensuring long service life and reliability. It meets all essential safety and health requirements according to CE regulations. STRUCTURE AND TABLE • A structure that withstands 600 T concentrated force on 1/3 of its surface. • Lower table with T-slots. • Upper table with T-slots. • Usable table surface: 3,000 x 2,000 mm. CYLINDER AND HYDRAULIC UNIT • Two double-acting hydraulic cylinders with 400 T each. • Single-stage hydraulic unit with automatic shutoff of pre-fill speed and independent operation, equipped with a decompression system and proportional pressure pre-fill valves. Equipped with digital potentiometers on the upper table for displacement control and an electronic synchronization system to compensate for off-center or unbalanced forces. • The press is equipped with a side pressure switch to regulate the most suitable pressure setting for each specific task. • Glycerin manometer with tonnage display. ELECTRICAL INSTALLATION AND SAFETY • Electrical installation for operation with 1 or 2 speeds of the main cylinder feed. • The press has a manual cycle and an automatic cycle (activated via a test button selector): • The manual cycle allows the execution of all movements (step by step) of the press at slow speed. • The automatic cycle allows the press to perform a complete production cycle. • Electrical safety system for the upper table fall protection system. • Lower table with hydraulic removal and physical stops. • The machine features a control panel with a touchscreen display for entering operating and calibration data. • 2 optical barriers of 1,000 mm with safety level IV installed at the front and rear. • Electrical components from Siemens are manufactured according to applicable CE regulations and laws in protection class IP55. Iodpfswlrv Ujx Ah Nsal • Electrical and hydraulic functions are redundant and self-controlled. Includes an additional safety block and self-monitoring devices for operation and safety. Includes inspection and certification of correct operation and safety distance for light barriers. • Safety is ensured by a laser and area protection with light barriers of level IV.

Condition: good (used), Year of construction: 2000, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: 2089, total height: 5,000 mm, table height: 1,000 mm, total width: 3,000 mm, pressing force: 250 t, overall weight: 25,000 kg, MIB BRAND HYDRAULIC PRESS YEAR 01/2000 CAPACITY 250T MACHINE TO BE RESTORED, COMPLETE Ijdpfx Ahsv Hbh Rj Nsal

Condition: like new (used), functionality: fully functional, pressing force: 400 t, table width: 2,000 mm, table length: 1,000 mm, operating speed: 106 mm/s, reverse speed: 125 mm/s, stroke length: 750 mm, pressing speed: 12 mm/s, Equipment: safety light barrier, HYDRAULIC C-FRAME PRESS FOR RAILWAY RAIL STRAIGHTENING We are offering a new/replica version of this press. The press will be placed on sale by the customer in the second or third quarter of 2026 due to the project's extension. The CF-400E/NC hydraulic press belongs to the CF/NC series and was specifically designed for railway rail straightening. Equipped with an upper and lower table made of machined C45E steel with DIN 650 grooves. It uses an optimized hydraulic system with a pressure of less than 255 bar, ensuring long service life and reliable performance. It meets all essential health and safety requirements according to CE regulations. TECHNICAL DATA Press force T 400 Motor power kW 22 Variable working speed mm/s 4-12 Approach speed mm/s 106 Return speed mm/s 125 Maximum pressure bar 255 Stroke mm 750 Lower table mm 2,000 x 1,000 Push plate mm 2,000 x 1,000 Maximum vertical clearance mm 1,000 Working height mm 960 Total height mm 3,560 + 600 Weight kg 39,500 STRUCTURE AND TABLE: • The gooseneck structure is electro-welded and made entirely of S355JR steel. • Stabilized and machined at the end of the welding process to ensure perfect parallelism and precision. • Calculated and designed using finite element software. • The upper table ensures perfect alignment with four 80 mm diameter lateral cylindrical guides equipped with maintenance-free bimetallic bushings. Iajdpewkv A Nefx Ah Njl CYLINDERS AND HYDRAULIC GROUP • Single-acting main cylinder with jacketed barrel, chrome-plated piston, and maintenance-free, wear-resistant guides. • Two lateral double-acting cylinders with chrome-plated pistons and wear-resistant guides, enabling fast start-up and return speeds. • Includes two independent hydraulic safety blocks. • Motorized hydraulic group with pre-fill valve for forward and reverse flow. Constant power, variable flow pump. • Equipped with a directional control valve, a pressure relief valve, a decompression valve, and an air-oil cooling system. • Glycerin pressure gauge with tonnage indicator. ELECTRICAL INSTALLATION AND SAFETY • Includes a SIEMENS safety PLC, model SIMATIC S7 1200, and a 7-inch touchscreen, model KTP-700 CONFORT, located in the control cabinet. It allows programming of semi-automatic and automatic operating modes, power, stroke, and dwell time. It has a memory capacity of 300 recipes, with each recipe capable of programming all previous values. • Electrical and hydraulic maneuvers are redundant and self-controlled. It includes an additional safety block and self-checking devices for maneuvers and safety. It includes verification and certification of correct operation and the safety distance for photocells. • Operation is via a low-voltage electric pedal. • For safety, lasers and work area protection with Category IV photoelectric barriers are integrated.

Condition: used, maximum load weight: 29,200 kg, overall weight: 35,000 kg, axle configuration: 2 axles, first registration: 07/2010, next inspection (TÜV): 04/2022, loading space length: 7,300 mm, loading space width: 2,300 mm, loading space height: 1,400 mm, loading space volume: 24 m³, Equipment: ABS, * ABS * Foldable underrun protection Iaodjxyn Dbopfx Ah Njl * Disc brakes * 5-chamber rear lights * Front landing gear * SAF axles ----Body: Half-pipe rear tipping body, capacity approx. 24 m³, raised front wall, rear chute, tailgate. Sale to businesses only. FOR EXPORT, ONLY THE NET PRICE IS PAYABLE!!!!! ALL INFORMATION PROVIDED WITHOUT GUARANTEE, INC. EQUIPMENT & ACCESSORIES. The basis of all purchase contracts, invoices, proforma invoices, orders, and sales discussions are our Terms and Conditions (see imprint/legal notice).

Condition: new, power: 294 kW (399.73 HP), fuel type: diesel, overall weight: 41,000 kg, axle configuration: > 3 axles, color: white, gearing type: mechanical, emission class: euro2, loading space volume: 20 m³, Year of construction: 2024, Equipment: ABS, air conditioning, X TO GO?EUROMIX TO GO? OFFERS YOU IMMEDIATELY AVAILABLE NEW STOCK VEHICLES, FROM OUR LOCATION IN PORTA WESTFALICA/GERMANY. FOR ALL CUSTOMERS WHO ARE IN AN ACUTE DEMAND SITUATION. (SHORT-TERM CAPACITY EXTENSION OR REPLACEMENT INVESTMENT)Your advantages: Iaodpfexn Hqcjx Ah Nsl Complete vehicles ready for immediate use (concrete mixer/tipper)Immediate availability directly from the manufacturer * body, assembly, commercial vehicle * Best price/performance ratio * Financing options * Trade-in of your old vehicles MAN TGS 41.400 BB 8x4 EURO 2 EuromixMTP 20m³ tipper ( HARDOX ) - NEW NEW - withaut registration - without registration - Vehicle equipment * Engine D2066LF41 - 400 PS / 294 KW * Transmission ZF 16 S 223 OD ( manual gearbox ) * Tires front axle 315/80 R22,5 rear axle 315/80 R 22,5 * Front axle 8000kg - rear axle 13000 kg * Wheelbase 1795+2505+1400 mm * Cab M medium length * Air deflector to prevent dust swirling upwards * Cruise control * Air conditioning * Noise measure 80 dB (92/97EWG) * AP axle ratio rear axle AP HPD 1382/HP- * Air intake raised with dry air filter / pre-separator * Differential lock * Fuel tank 300l left * Three-piece steel bumper * MAN BrakeMatic ( electronic brake system ) * Disc brakes rear axle and front axle * Central locking * Sun visor Tipper equipment: * Euromix MTP TMK 20m³ tipper body ( HARDOX ) * Semicircular shape * CE standard * Floor Hardox 450 - 8mm * Sides Hradox 450 - 6mm * Swinging rear wall * Spare wheel holder with lifting winch * Aluminum mudguards * Versatile lighting options * Access steps to the tipper body (access steps: inside the tipper body) * EuromixMTP scissor-type tipping stabilizer Accessories: * Hydraulically opening rear wall * Manual or electric tarpaulin * Chute for asphalt * Tool box * Shovel and broom holder * Fire extinguisher * Work lights * Manual or electric sliding tarpaulin * electric, with or without * tarpaulin canopy * Folding underride guard systems * Partial unloading for very small areas EUROMIX REAR TIPPER ? DURABLE AND ROBUST FOR YOU IN USE! If you have any further questions, our team is at your disposal in the following languages. * We speak German * We speak English * Nous parlons français * Mówimy po polsku * ?? ????? ?? ????? * Govorimo Srpskohrvatski

Condition: new, power: 294 kW (399.73 HP), fuel type: diesel, overall weight: 41,000 kg, axle configuration: > 3 axles, color: white, gearing type: mechanical, emission class: euro2, loading space volume: 20 m³, Year of construction: 2024, Equipment: ABS, air conditioning, X TO GO?EUROMIX TO GO? OFFERS YOU IMMEDIATELY AVAILABLE NEW STOCK VEHICLES, FROM OUR LOCATION IN PORTA WESTFALICA/GERMANY. FOR ALL CUSTOMERS WHO ARE IN AN ACUTE DEMAND SITUATION. (SHORT-TERM CAPACITY EXTENSION OR REPLACEMENT INVESTMENT)Your advantages: Complete vehicles ready for immediate use (concrete mixer/tipper)Immediate availability directly from the manufacturer * body, assembly, commercial vehicle * Best price/performance ratio * Financing options * Trade-in of your old vehicles MAN TGS 41.400 BB 8x4 EURO 2 EuromixMTP 20m³ tipper ( HARDOX ) - NEW NEW - withaut registration - without registration - Vehicle equipment * Engine D2066LF41 - 400 PS / 294 KW * Transmission ZF 16 S 223 OD ( manual gearbox ) * Tires front axle 315/80 R22,5 rear axle 315/80 R 22,5 * Front axle 8000kg - rear axle 13000 kg * Wheelbase 1795+2505+1400 mm * Cab M medium length * Air deflector to prevent dust swirling upwards * Cruise control * Air conditioning * Noise measure 80 dB (92/97EWG) * AP axle ratio rear axle AP HPD 1382/HP- * Air intake raised with dry air filter / pre-separator * Differential lock * Fuel tank 300l left * Three-piece steel bumper * MAN BrakeMatic ( electronic brake system ) * Disc brakes rear axle and front axle * Central locking * Sun visor Tipper equipment: * Euromix MTP TMK 20m³ tipper body ( HARDOX ) * Semicircular shape * CE standard * Floor Hardox 450 - 8mm * Sides Hradox 450 - 6mm * Swinging rear wall * Spare wheel holder with lifting winch * Aluminum mudguards * Versatile lighting options * Access steps to the tipper body (access steps: inside the tipper body) * EuromixMTP scissor-type tipping stabilizer Accessories: * Hydraulically opening rear wall * Manual or electric tarpaulin * Chute for asphalt * Tool box * Shovel and broom holder * Fire extinguisher * Work lights * Manual or electric sliding tarpaulin * electric, with or without * tarpaulin canopy * Folding underride guard systems * Partial unloading for very small areas EUROMIX REAR TIPPER ? DURABLE AND ROBUST FOR YOU IN USE! If you have any further questions, our team is at your disposal in the following languages. Iajdpfx Ahjxdg T As Nsl * We speak German * We speak English * Nous parlons français * Mówimy po polsku * ?? ????? ?? ????? * Govorimo Srpskohrvatski

Condition: used, machine/vehicle number: WDB9642301039xxxx, mileage: 140,000 km, Year of construction: 2020, Please contact ATS Norway for more information Please provide reference number upon request: 20586 Specifications: Model year: 2020 Mileage: approx. 140,000 km Transmission: Automatic Suspension: Full steel Tires (see photos) Emission standard: Euro 6 Length: 872 cm Width: 255 cm Wheelbase: 175 cm Curb weight: 16,100 kg Driveline: 8x4 Engine output: 578 hp Additional driving lights Air horn Tow hitch Rear-view camera Refrigerator Sleeper cab Radio/CD Air conditioning (A/C) Description:2020 Mercedes Arocs 3258 8x4 tipper truck with low mileage and full steel suspension.The truck is EU-approved until July 2025 and ready for immediate operation.Some minor cosmetic damage to the front, clearly shown in the photos. Iedpfswph U Iox Ah Noal Km: 140000 HK: 577 Technical approved: no EU-approved until: 08.07.2025 Own weight: 16100 Total Weight: 36000 Payload: 19825 Width: 255 Length: 872,5 Euro: 6 Model: 2020 Mercedes Arocs 3258 8x4 Tippbil – Lav kilometer! Gearbox: Automatic

Condition: used, machine/vehicle number: WDB9642301035xxxx, mileage: 135,000 km, Year of construction: 2019, Please contact ATS Norway for more information Please provide reference number upon request: 20584 Specifications: Model year: 2019 Mileage: approx. 125,000 km Transmission: Automatic Suspension: Full steel Tires (see photos) Length: 865 cm Iaodpfxjwph Ibe Ah Njl Width: 255 cm Wheelbase: 175 / 280 cm Curb weight: 15,450 kg Emission standard: Euro 6 Engine output: 578 hp Heated tipping body Driveline: 8x4 Additional spotlights Air horn Toolbox Tow hitch Rear-view camera Sleeper cab Radio/CD Air conditioning (A/C) Service history: Maintained by Bertel O. Steen and partially by private workshop Description:Mercedes Arocs 3258 8x4 tipper truck from 2019 with low mileage.The truck will be delivered with a new front mudguard and minor issues fixed prior to sale.Service has been carried out at an authorized Mercedes-Benz dealer (Bertel O. Steen) and partially by owners workshop.Available for prompt delivery. Km: 135000 HK: 577 Technical approved: no EU-approved until: 25.05.2025 Own weight: 15450 Total Weight: 36000 Payload: 20475 Width: 255 Length: 865,7 Euro: 6 Model: Mercedes Arocs 3258 8x4 Tippbil – Lav kilometer! Gearbox: Automatic

Condition: used, empty load weight: 5,800 kg, maximum load weight: 30,200 kg, first registration: 08/2012, next inspection (TÜV): 09/2025, total length: 7,950 mm, total width: 25,500 mm, total height: 30,000 mm, suspension: air, tire size: 385 / 55 R 22.5 / 5mm, front tire size: 385 / 55 R 22.5 / 5mm, operation weight: 36,000 kg,