Generator set

Scania DC13 kVA Genset Super Silent - DPX-21036

Year of construction: 2025, condition: new, Specification: Maximum sheet size 740 x 1060 mm Minimum sheet size 330 x 400 mm Max. cutting pressure 3.0 MN Maximum number of strokes per hour 9.000 sh/h Suitable for following material Paper to a minimum weight of 80 g/m² Carton board up to a maximum thickness of 2.000 g/m² Bsdpfx Abjlyp Emo Tedk Corrugated board up to a maximum thickness of 4 mm Equipment: Non-Stop-feeder Manual Non-Stop device for the feeder Stripping station including auxiliary pile for Non-Stop delivery Centerline operator platform 1 tool set Machine delivery time: 6-8 month after order

Condition: new, functionality: fully functional, power: 18.8 kW (25.56 HP), gearing type: automatic, fuel type: diesel, color: red, overall weight: 2,740 kg, lifting height: 3,283 mm, tire size: 31x15,5x15 AS, tire condition: 100 %, drive condition: 100 %, axle configuration: 2 axles, number of seats: 1, emission class: euro5, Year of construction: 2025, fuel: diesel, Equipment: additional headlights, adjustable boom, all wheel drive, cabin, head guard, pallet forks, standard shovel, H&R Telehandler 2512T – The compact wheel loader for versatile applications with an enclosed cab for greater comfort. Advantages of the H&R Wheel Loader 2512T Powerful engine: The Yunnei DEF20CFF4 4-cylinder engine with 25 hp delivers high performance with low fuel consumption and complies with the Euro 5 emissions standard. Easy operation: The 2-stage torque converter and all-wheel drive enable easy handling, even with heavy loads and difficult ground conditions. Compact design, high maneuverability: Despite its weight and a lifting capacity of 1200 kg, the H&R wheel loader has a relatively small turning circle. Hydraulic quick coupler: With the hydraulic quick coupler, you can quickly and easily switch between different attachments, such as the standard bucket or the manually adjustable pallet fork. Expandable functions: Use the additional hydraulic control circuit to operate additional attachments such as mowers, bale grippers, snow plows, and much more. H&R loaders are technically and visually optimized in-house and thoroughly tested. Additionally, each machine receives extensive rust protection treatment. Our loaders are CE-compliant according to the EU Machinery Directive. Our machine has a TÜV Süd certificate for obtaining an individual operating permit in accordance with Section 21 of the German Road Traffic Licensing Regulations (StVZO) (road approval/operating permit as a self-propelled work machine). Key Features of the H&R 2512T Telehandler • Fully equipped • Extensively optimized in Germany • Telescopic boom for a greater reach • Includes standard shovel (160 cm) and pallet fork • Powerful and versatile - versatile • Compact design ensures high maneuverability • Comfortable cab with heating, ventilation, and radio (MP3 and USB) for extended working hours • Joystick with electric gearshift for precise control • Additional control circuit for attachments such as mowers, bale grabs, snow plows, etc. • LED work lights and windshield wipers for clear visibility in all weather conditions • MP3 radio and USB port for entertainment while working • Rearview camera with display in the interior • Trailer hitch for additional trailer use • 220V cooling water preheater for reliable cold start capability and increased engine life • Hour meter for monitoring operating times and ensuring optimal compliance with maintenance intervals • Ideal for agriculture and construction and industry • CE-compliant according to the EU Machinery Directive • 1-year spare parts warranty Price Net: €21,845.00 VAT: €4,150.00 Gross: €25,995.00 Financing available! Optional Road registration / operating permit: €595 Extended warranty (2 years): €590 Transportation in Germany and Austria: Upon request Technical details Engine: 4-cylinder Yunnei DEF20CFF4 Engine power: 25 hp (18.8 kW) Emissions class: Euro 5 Lifting capacity: 1200 kg Lifting height: 3283 mm (bottom edge of standard pallet fork) Unloading height: 2753 mm (standard bucket tipped) Lifting capacity: 1200 kg Wheelbase: 2.17 m Tires: 31×15.5-15 AS Dimensions: 3850 x 1610 x 2460 mm Weight: 2740 kg Bdodpjrhgn Sofx Ab Tsk Accessories and spare parts are available from us. Please provide your telephone number when making inquiries.

Condition: ready for operation (used), Year of construction: 2008, machine/vehicle number: 100810261, type of cooling: water, SHINOHARA 75 VP AMBIDEXTROUS (1+4 COLORS) CIP3. AUTOMATIC CHINCH PASS AUTOMATIC WASHING. UV LAMPS. WATER COOLER WITH AUTOMATIC ALCOHOL MIXING PH. AUTOMATIC METERS. WASHING ROLLER WINDER DISTRIBUTED WITH THE MACHINE. Bedpfx Aetvmq Neb Todk FLOOR FAN. 2 CALIBRATION DEVICES 20 SPARE CYLINDERS. PRINTING 4600000

Condition: excellent (used), Grinding length 1000 mm Bdjdpsk Abxxofx Ab Tsk grinding diameter fi 350 mm In very good condition.

Condition: new, Year of construction: 2025, machine/vehicle number: YBW92020, fuel type: diesel, motor manufacturer: Caterpillar 3516B HD, General information Field of application: Construction Weights Empty weight: 18.290 kg Functional Generator capacity: 2.500 kVA CE mark: yes Bodon An A Nepfx Ab Tjdk Other information Fuel consumption: 453 Liter per Hour at 90% Load (Prime) Generator: Caterpillar SR5 Frequency: 50 Voltage: 400 Drill equipment: Control Panel Transport dimensions (LxWxH): 6,38x2,29x2,37 Production country: DE Additional information Please contact Tijmen Pesselse, Kenny Bongers or Arjen van Dijk for more information

Year of construction: 2002, condition: good (used), Built in: 2002 Working hours: 10.688 thsd.h Size: max 365 x 305 mm min 105 x 115 mm Product thickness: max 15 mm min 6 mm Speed: max 9.000 c/h min 2.000 c/h Equipment: gathering chain & feeder • 10 station gathering track & chain • 10 automatic feeders • 1 cover folder feeder 1528 stitching unit • wire unwind device • stitch control Bjdpsd R Sanjfx Ab Todk • 2 stitching heads HK 75 three knife trimmer • three knife trimmer 1522 knives • 2 sets of knives

Condition: good (used), Cauhe IVA 120×160 die-cutter The machine is fully functional, like new. Made in Spain. Bodpfxjwq Dw Ij Ab Tjdk Format: 1200x1600mm Weight 10,000kg Power supply 380V Installed power 11 kW Impact force 2 Tm/dm2 Year of production 2015. Equipment: – pneumatic clutch and brake – control panel – quick assembly frame – 3 operating modes: continuous, with time delay, manual – central automatic lubrication – additional safety guards – operating tools – sheet metal for pressure

Year of construction: 1996, condition: ready for operation (used), Built in: 1996 Size max: 480 x 320 mm Size trimmed: 480 x 320 mm min 153 x 108 mm Size trimmed: max 475 x 300 mm min 148 x 105 mm Product thickness: max 13 mm Speed: max 13.000 c/h Bdedpfx Abjd N D Nto Tek Number of heads: max 6 Equipment: gathering chain & feeder three knife trimmer

Condition: excellent (used), Year of construction: 1988, functionality: limited functionality, machine/vehicle number: 25.05.004, total length: 9,500 mm, total width: 2,250 mm, total height: 2,300 mm, input voltage: 380 V, power: 50 kW (67.98 HP), overall weight: 21,000 kg, empty load weight: 18,000 kg, compressed air connection: 7 bar, Equipment: documentation/manual, Paper size: 730 x 1060 mm, printing area: 710 x 1040 mm Paper thickness: 0.05 mm – 0.5 mm Preset maximum speed (due to simulation of the throw-off time for high-speed presses) is 4,000 sheets per hour, but the machine can operate much faster for commercial jobs. Bdodpfx Aouf Sy Aeb Tok Four-fold central impression cylinder that prints all 4 colors in one gripper closure. 1988 FAG Speedproof with operator console for ink duct and cylinder adjustments, enabling extremely accurate register printing. Attached is the original factory brochure. The machine has been fully dry ice cleaned, and the cylinders are in excellent condition. Offered strictly on an 'as is, where is' basis. Maximum width is 225 cm, maximum height is 230 cm; shipping in a High Cube container is possible. Price is absolutely fixed, based on the removal of easily separated parts which we could sell separately, such as the Mabeg feeder with vacuum belt delivery, and the four-fold Baldwin stainless steel unit—with each color having its own bath, a mixer, and adjustable temperature control, so all four baths can be set to different temperatures and alcohol concentrations. The machine was dry ice cleaned, and it was intended for prominent use in printing electronic paper. However, due to too many initial losses, the project was discontinued. The machine has been with us for 3 years and, due to its size, I want to sell it as quickly as possible. Hence this very low price. It is an excellent machine. If the machine needs to be set up for testing and sampling, this is possible at an additional cost of €10,000, of which €5,000 must be paid in advance as a deposit under agreed conditions. All relevant information can be found in the original FAG folder for the machine, available via this advertisement as a PDF. Technical Data - Printing size max.: 710 × 1040 mm (27.95 × 40.94 in.) - Paper size max.: 730 × 1060 mm (28.74 × 41.73 in.) - Paper size min.: 500 × 700 mm (19.68 × 27.56 in.) - Stock thickness: 0.05 – 0.5 mm (0.002 – 0.020 in.) - Plate size max.: 800 × 1080 mm (31.50 × 42.50 in.) - Plate thickness: 0.25 – 0.5 mm (0.010 – 0.020 in.) - Speed max.: 4,000 sheets/h - Floor space requirement (incl. access to feeder, delivery, and central control desk): 950 × 525 cm (374 × 206.69 in.) - Press height: 230 cm (90.55 in.) - Weight (including paper stacked in feeder and delivery): approx. 18,000 kg (approx. 39,690 lbs) - Total power requirements: approx. 50 kW - Compressed air supply: 6 – 7 bar

Condition: new, Year of construction: 2025, An active lime production line is a set of equipment designed to produce high-quality lime from limestone, with the aim of meeting various industrial applications, such as in the production of steel, environmental desulfurization, and other processes. The process typically involves several stages, including limestone crushing, calcination, hydration, and finally, the production of active lime. Here is a general overview of the main steps involved in an active lime production line: Bdsdpfxsq Nyzbj Ab Tok 1. Limestone Quarrying: - Raw limestone is extracted from quarries and transported to the lime plant. The limestone may undergo crushing and sizing processes to achieve the desired particle size. 2. Limestone Preheating: - The raw limestone is typically preheated in a preheater or precalciner before entering the rotary kiln. This preheating step helps to reduce the energy consumption in the kiln by partially decarbonizing the limestone. 3. Loading into the Rotary Kiln: - The preheated limestone is loaded into the rotary kiln, a large, rotating cylindrical furnace. The kiln is inclined at a slight angle to facilitate the movement of materials through the kiln. 4. Calcination: - In the rotary kiln, the limestone undergoes high-temperature calcination (typically in the range of 900 to 1,450 degrees Celsius). This process causes the limestone to undergo chemical and physical changes, converting it into lime (calcium oxide). 5. Cooling: - After calcination, the lime moves through the cooling zone of the kiln, where it is cooled down. This cooling step is essential to stabilize the lime and prepare it for further processing. 6. Hydration: - The quicklime produced in the kiln is then slaked with water in a hydration process to produce slaked lime (calcium hydroxide). This is typically done in a separate hydrator. 7. Separation of Unreacted Lime: - The slaked lime is separated from any unreacted quicklime or impurities. This step ensures that the final product is of high quality. 8. Filtering and Drying: - The separated slaked lime is filtered to remove excess water, and the resulting product is dried to achieve the desired moisture content. 9. Storage and Packaging: - The final product, active lime (calcium oxide), is stored in silos or other storage facilities. It can then be packaged for sale or transported to end-users. 10. Environmental Considerations: - Dust collection systems and other environmental control measures are often implemented to minimize emissions and ensure compliance with environmental regulations. The design and configuration of an active lime production line can vary based on factors such as the type of limestone used, production capacity requirements, and specific industrial applications. Modern production lines often incorporate advanced technologies to optimize energy efficiency, minimize environmental impact, and ensure high-quality active lime production.