Agricultural machine

Ruthmann T220.1 S12 UNFALLSCHADEN!

Year of construction: 1999, condition: used, pressure 630 t passage width 1390 mm stroke 400 mm table surface area 1390x1250 mm total power requirement 75 kW weight of the machine ca. 36 t Dedpfx Aelp U R Seb Tscr dimensions of the machine ca. BxTxH 3200x2800x4000 mm

Condition: used, Year of construction: 1969, rotary table diameter 1000 mm grinding height 500 mm grinding head - power requirement 15/5,5 kW total power requirement 30 kW weight of the machine ca. 18 t dimensions of the machine ca. m S I E L E M A N N (Germany) Hydraulic Rotary Table Internal and Face Grinding Machine with two grinding heads and with horizontal workpiece clamping Model RFsB 100 Year 1969 / fully reconditioned by the manufacturer in 1990 _____ Max workpiece Ø 1,000 mm Max. height of workpiece, approx. 400 mm Mounting height under grinding spindles approx. 500 mm Grindable Bore Ø, approx. 50 – 900 mm Max. Workpiece weight approx.. 900 kg Distance between Table bore and column 1.150 mm Table Ø / Face plate Ø, approx. 1,000 mm Table speeds, hydraulic, infinitely variable, right/left 5 – 60 rpm Table/workpiece infeed, 5 steps 0.0025 – 0.025 mm/stroke Table stroke approx. 500 mm Distance between grinding spindle and machine body 600 mm Surface Grinding Head Ø (Segmented wheel) 450 mm Grinding slides stroke, max. 500 mm Grinding slide speeds, infinitely variable 0.2 – 1 m/m Max. Internal Grinding spindle Ø 140/100 mm Grinding cup wheel Ø, up to approx. 200 mm Dcjdpfx Aeu Su Apsb Ter Motor for Surface Grinding 15 kW / Motor for Internal Grinding Spindle 5,5 kW Total electrical load, approx. 30 kW - 380 V - 50 Hz Weight, approx. 18,000 kg Accessories / Special Features • The rotary table carries the workpiece and is also actuating the automatic grinding infeed • The relevant Grinding head can be swivelled in by turning the Column (hydraulic lift) so the workpieces can be ground in one setting with exact angles. • Built-on magnetic face plate, Ø approx. 1,000 mm, with 5 T-slots and stepless adjustment for the magnetism • Automatic workpiece infeed, with automatic depth stop. • Separate Height adjustment of internal grinding head, Grinding spindle Ø 100 mm. • Dressing devices mounted on each grinding head, Separate Switch Cabinet and hydraulic unit, • No Coolant Device available This machine is ideal for grinding bulky and heavy workpieces like housings, gears (!) bearing rings, cylindrical knives, etc. Condition: Good. Machine can be inspected soon under power Delivery : Ex stock as inspected. Payment : Net, after conclusion of contract.

Condition: excellent (used), 200m3 stainless steel tanks Number of items: 3 180m3 stainless steel tanks The diameter is 4.70m Height without legs is 14m 4,1mm wall thickness 5,1 bottom thickness Dcodpfxsfngl Ns Ab Tsr We offer transport with our specialized trailer to every region of Europe!

Condition: as good as new (ex-display), 1.000 m barely used HDPE dredge pipe with lose flanges Dedpfx Abof Tdn Ue Tecr 500 m used HDPE dredge pipe with fixed flanges

Condition: like new (used), CNC vertical jig boring machine WMW MIKROMAT Travel X: 1120 mm Travel Y: 710 mm Spindle travel Z: 315 mm Travel W: 630 mm Numerical Command: CNC NUM 1060 Spindle: Ø 125 mm Cone: SA40 Rotation: from 36 to 2240 RPM Table size: 1400 x 900 mm Distance between colums: 1080 mm Maxi distance spindle nose/table: from 0 to 900 mm max Maxi eligible load on table: 1000 kg max Separate electrical panel Dcedpfxsgy E Dps Ab Ter Machine renewed in 2000 with CN NUM1060 Voltage: 380 V Dimensions (L x W x H): 4000 x 2460 x 3030 mm Weight: approx. 9 T

Condition: new, The NEOMIG-i 500 G is a three-phase multiprocess welding machine with separate wire feeder. Its advanced digital technology and its duty cycle ensure excellent arc characteristics for industrial MIG/MAG applications. The integrated synergies facilitate setup and reduce spatter during welding. Equipped with the WF wire feeder, it offers a control precise welding parameters to ensure perfect quality. MULTI-PROCESS MIG/MAG : - steel and stainless steel wire: Ø 0.6 to 1.6 mm - aluminum wire : Ø 0.8 to 1.6 mm - CuSi and CuAl wire : Ø 0.8 to 1.6 mm - flux-cored wire (reverse polarity) : Ø 0.9 to 2.4 mm MMA DC / Pulsed : basic, rutile and cellulosic electrodes. TIG DC Lift / Pulsed. Dcedsmxkdpepfx Ab Tsr Gouging.

Condition: used, Year of construction: 1995, operating hours: 1,589 h, machine/vehicle number: 558B, Equipment: all wheel drive, - Wunderschoner Liebherr shovel loader is in a really good condition directly from the military (Swiss-Army) Well maintained and cared for, - The 508 is a really solidly built wheel loader, just right quality for the military. - Is also no source of oil, makes NO oil stains, is almost as good as new - The cab is glazed all around for a good all-round view! ! - The Liebherr L508 is equipped with: Quick change device 0,8m? Bucket, Pallet forks with log push, Additional hydraulic connections for additional equipment, All-wheel drive, Articulated steering 40 degrees very maneuverable with a small turning circle - Tire size 12.5 R 20 off-road profile, tires are foamed (you can not drive flat) Snow chains are also included, Hydro drive, Highest speed 25 Km / H, Displacement 2732 cm? 4 cylinder series Deutz BF4L1011 T with Turb,24Volt power supply, - TUV can be made NEW on request for an extra charge !!! - All my vehicles can be seen on my homepage. - You are now rushing back and forth from Flensburg to Berchtesgaden to look at the different cars, but here you will find over 150 vehicles of the following types: - Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-Model, Mowag, DB, etc., and all with TUV. - even with TUV. - There are also an unimaginable number of spare parts and accessories. - Why would you settle for anything less? - Call 0049 (0)2248 Greetings, your Philipp from the Hanfbach valley Dsdpfxjqx S Alj Ab Tjcr

Condition: good (used), WEBER tube extrusion line including: WEBER DS 8.5 Elmepla saw Dsdpfx Abovryhys Tocr Battenfeld R200/6 Battenfeld V125

Condition: used, Year of construction: 1979, turning diameter over bed:480 mm turning diameter over slide rest:200 mm turning length:650 mm swing diameter max. over bed cover:200 mm centre distance:750 mm spindle head:Gr.6 spindle bore:58 mm total power requirement:18 kW weight of the machine ca.:2,7 t Dcsdodmbrxspfx Ab Ter dimensions of the machine ca.:2,70x1,58x1,68 m

Condition: excellent (used), Year of construction: 2010, Control: Siemens Sinumerik 840D Work Area Swing diameter over bed: 820 mm Swing diameter over cross slide: 520 mm Cross slide travel: 600 mm Tool Holder: Front: Capto size C6 – Multifix D1 Rear: Boring block with clamping claw Centre Distance: 3,000 mm Main Spindle Drive Power digital AC motor – 60% duty cycle: 46 kW Number of gear stages: 2 (ZF planetary gearbox, electrically shifted, mounted outside the headstock) Headstock Spindle nose DIN 55027 / Bore (standard): 11 / Ø 132 mm Dodpfx Abjxgdfbs Tocr Spindle diameter in front bearing: 190 mm Speed range (constant V): 1 – 1800 rpm Standard chuck sizes: Ø 315, Ø 400, Ø 500 mm Spindle nose DIN 55026 / Bore (option): A 11 / Ø 164 mm Spindle diameter in front bearing: 210 mm Speed range (constant V): 1–1600 rpm Cross Slide Transverse feed range: 0.001 – 1000 mm/min Longitudinal feed range: 0.001 – 2000 mm/min Thread pitches: 0.01–999.999 mm Rapid traverse transverse/longitudinal: 5/10 m/min At centre distance: 4,000 mm Transverse feed force: 16,000 N Longitudinal feed force: 22,000 N Turning tool section: 40 x 40 mm² Tailstock Quill diameter: 125 mm Quill travel: 280 mm Taper: 6 Mk Electrical Equipment Three-phase: 400 V, 50 Hz Design in accordance with VDE and EMC guidelines EN50081-2 / EN 50082-2 Interference suppression level A according to EN 50081-2 For TN-S or TN-C networks / industrial networks without RCD protection Dimensions Machine (L × W × H) = 2.88 m + centre distance × 2.55 m × 2.32 m Machine Weight (Centre distance / weight approx. kg) 3000 mm: 10,900 kg