Forestry machine

Rapid 430 + Lipco ME104-LZ

Condition: new, functionality: fully functional, The Brugger PX130 wood chipper is operated via the PTO shaft of a tractor and is capable of shredding logs with a diameter of up to 13 cm. The robust design and high-quality materials ensure reliable performance. With hydraulic feed, it is an efficient solution for wood processing in various agricultural and forestry applications. - Hydraulic feed Fedpjrblwdofx Afnoft - Diameter up to 13cm - Weight 420kg - PTO speed: 540 rpm - Horsepower tractor: 30-70 hp

Condition: as good as new (ex-display), Demonstrator with 7 operating hours Another machine available immediately (ex works in Neckartailfingen) MRZ 830 Shredder Custom tariff number: 84659600 Feed opening 800 x 1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3 ph Blades: multi-rotatable Hydraulically operated slide gate Screen perforation of your choice (10 - 40 mm) Weight approx. 1,600 kg Dimensions (L x W x H) approx. 2,290 x 1,420 x 1,750 mm Turbo clutch Included as standard: - Automatic star/delta start-up - Fast hydraulics - Auto. OFF when the rotor is idle - Speed 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant . The shredder is designed for shredding natural wood, particle board, and MDF, as well as other materials after testing and approval by the manufacturer. Included: - Raise the shredder by 30 cm (prepared for conveyor belt) Fedev Sqrpspfx Afnsft Additional shredder options: - Articulated conveyor belt + €8,770 net Horizontal section: 1,200 mm Rising section: 2,500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2,000 mm + - 100 mm - Overbelt magnet + €6,780 net - Conveyor belt and overbelt magnet control + €2,750 net (Start and stop synchronized with the shredder) Raw material requirements: - The moisture content (dry) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 11470, workpiece width (max.): 450 mm, Hundegger K2 in very good condition, overhauled, rebuilt, and commissioned by Hundegger. Since then, it has only run for about 20 hours and was professionally dismantled and stored in a heated hall. Ffedswhpavspfx Afnst

Condition: used, machine/vehicle number: WHLT2350100029458, Year of construction: 2021, Carrying capacity: 2.770 kg GVW: 730 kg Ffsdjtr H Nvepfx Afnot VAT/margin: VAT qualifying Front tyres / undercarriage remaining: 100 Rear tyres remaining : 100 Tyre brand: - Front tyre size: - Rear tyre size: - Please contact PFEIFER GROUP for more information

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, operating hours: 33 h, machine/vehicle number: CAT00D7GLC7G01263, USED CATERPILLAR DOZER C/W RIPPER MODEL : D7G Ffjdpfxev Dr S Uj Afnot SERIAL : CAT00D7GLC7G01263 HOUR : 33 YEAR : 2009

Condition: excellent (used), Standard steam boiler 2000 kg/h 22 Bar (2166) oil or gas burner Fsdpfx Ajxqr E Dofnsft

Condition: used, Year of construction: 1974, Please contact ATS Norway for more information Please provide reference number upon request: 17647 Specifications: Approx. 1974 Maximum load capacity: 4,000 kg Broken window Tire condition: See pictures Adjustable tower Rotor lamp Starts and runs Ffedpfjwph Uzox Afnot Description:The truck is in working condition, starts and runs as it should, but some maintenance and running costs are expected.The tower can be adjusted in addition to standard lifting and lowering.Maximum lifting capacity is 4 tons.Fast delivery can be offered. Own weight: 1 Model: motvektstruck

Condition: used, Year of construction: 2018, No. 10027 Single-shaft shredder AMIS / WEIMA WT 15 Used, year of construction 2018, approx. 250 operating hours According to our customer, the machine is fully functional and can be viewed and tested on site Single-shaft shredder for cables, plastics & recycling Feed opening 1500 x 1160 mm LW Rotor width 1500 mm Rotor diameter 368 mm Rotor speed approx. 90 rpm Motor output 90 kW System output 99 kW Power consumption 210 A Voltage 400 V / 50 Hz PLC control Siemens SIMATIC The high-performance shredder in the WT series is ideal for processing a wide variety of plastics - especially difficult, flexible materials such as films, filaments, big bags, tapes, carpets, textiles, foams and all loose and non-bulky waste materials. The WING-RAM swing arm ensures that even contaminated or moist material is fed safely. Ffsdpfxjxwdiuo Afnst Incl. angled conveyor belt / discharge belt AMIS FB 7000 x 1500 x 580 / year of construction 2018 / 1.5 kW Incl. magnetic separator AMIS Installation dimensions approx. 9000 x 3500 x 3950 mm LWH Transport dimensions single-shaft shredder approx. 3000 x 2700 x 3200 mm LWH Weight approx. 12500 kg Sale on behalf of customer, ex location near 69123 Heidelberg, without dismantling, without transport and assembly Dismantling, transport and loading by us optionally possible Errors in description and price excepted To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: used, mileage: 550,000 km, power: 368 kW (500.34 HP), first registration: 05/2010, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: red, gearing type: automatic, emission class: euro5, loading space length: 8,500 mm, Equipment: air conditioning, parking heater, * Iveco AS320S50X construction machinery transporter, 4 axles * First registration: 2010 * 550,000 km Ffedpfx Afexyca Renot * Euro 5 * Cursor C13 engine * 500 hp * Leaf-air suspension * 8x2 axle configuration * 2nd axle: lift axle * 4th axle: steering, lift axle * Air conditioning * Retarder * Auxiliary heater * PTO (power take-off) * Automatic transmission * Hydraulic ramp * Water tank * Loading platform: 8.50 m * Wheelbase: 6.10 m * Axle distance 1-2: 4.65 m * Axle distance 1-4: 7.50 m * Unladen weight: 14,150 kg * Gross vehicle weight: 32,000 kg * Payload: 17,850 kg

Condition: used, Geared electric motor, 8.5/1.4kW, angular drive, clutch, brake elevator motor Drive electric motor, 8, 5/1, 4kW, rev. 9-54 angle drive Lift motor Ziehl-Abegg Rfzu180.31-2/12 380V / 50Hz 8, 5/1, 4kW Drive torque: 1114 Nm Rev.: 9-54 rpm Ffodpfxjud H Dae Afnjt Angular drive, clutch, brake gear several pieces for sale from stock.