Mobile Concrete Batching Plant

Plusmix Beton Santralleri PLUS MT 35

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 5,850 mm, total length: 12,125 mm, total width: 5,150 mm, overall weight: 8,000 kg, warranty duration: 12 months, inner dimension height: 5,000 mm, inner dimension length: 12,000 mm, inner dimension width: 5,000 mm, Equipment: cabin, lighting, PAINT BOOTH 12x5x5M EZ Series Model: - LED ceiling lighting - LED side lighting - RIELLO oil burner - Four fans, including: ‎ ㅤ- 2x supply fans ‎ ㅤ- 2x exhaust fans TECHNICAL PARAMETERS: - External dimensions: 12125x5150x5850 mm - Internal dimensions: 12000x5000x5000 mm - Entrance doors: 4000x4800 mm (2 units, four leaves, reinforced hinges) - An additional BOX 1650 mm x 8000 mm should be included in dimensions – can be placed on either the right or left side. - Structure: galvanized steel frame - Heat exchanger: high-grade stainless steel - Panels: filled with mineral wool insulation - Drive-on ramps – 2 units - Fully grated floor The reinforced frame construction prevents vibration and the air surge effect from the main supply duct. Bedpfxjxm U Exo Aa Eold Double Roof Design: - Upper outer layer - Inner truss structure with V600 ceiling filter Air Circulation System: - Supply system: Jet turbine 7.5 kW – 2 units - Exhaust system: Jet turbine 7.5 kW – 2 units Air Filtration System: - Pre-filter collects particles larger than 10 μm - Ceiling filter collects particles larger than 5 μm - Floor filter: Paint Stop - Carbon filter Lighting: - Ceiling lights: 52 LED tubes (14 angled fixtures with 4 tubes each) - Side lighting: 26 LED panels integrated into the right, left, and rear walls Burner: Riello – 2 units, oil model 40 G20, approx. 200,000 Kcal/h - Heat exchanger: high-quality stainless steel - Heating time: 8–15 min (max. 80°C) Optional Features: - Roof-mounted boxes - Insulated roof - Pass-through doors - Water curtain - Color according to RAL palette - Explosion-proof (EX) version available

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 500 x 310 band speed 15 - 100 m/min table height 844 mm Bljdefg E Hlepfx Aa Ejd dimensions of saw-band 4250 x 34 x 1,1 mm total power requirement 2,2 kW weight of the machine ca. 1,2 t dimensions of the machine ca. 1,4 x 2,4 x 1,935 m ACTION PRICE!!! 2-column double miter band saw K-tech DG 50/33 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to bevel cut, feed controller + cutting pressure controller • Massive material infeed roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to bevel cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large dimensioned wheels (520 mm) a. • Clear miter setting up to 60° Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: good (used), Year of construction: 1990, RANDEK SP700 cut saw manufacture Randek Sweden Year 1990 in good condition Randek’s SP700 series provides reliable cut saws that are a major asset to roof truss and house producers around the world. The SP700 cut saw is effective, easy-to-use and accurate. It has been on the market for a long time and is continuously improved in close contact with our many customers. The blade on this semi-automatic saw supports angled cuts, which mean it can make any cuts you may require. Bodoh Ayyqjpfx Aa Eold You can also use the large diameter blade (700mm ) to cut several sections of stacked timber simultaneously. • Angled cuts from 0° to 360° • Cut heights up to 250 mm, possible to cut three boards each cutting cycle • PLC programmable saw • Fixation of timber near the cutting area resulting in accurate cutting roller conveyor system with 5 adjusteable pneumatic stoppers . Lenght 6,25m outfeeding roller conveyor 4,10m Complete line: 11,5m technical inforamtion under subjet of correction

Condition: new, Year of construction: 2025, RETRACTABLE LIQUID SPRAY BOOTH Retractable spray booths are designed for manual painting application with side draft ventilation, for extraction of applied liquid paint overspray. The benefit of the retractable liquid spray booths is that saves space in the workshop. STRUCTURE It is manufactured from scissor system body, made of electro galvanized rectangular and circular tube structures and covered by PVC fabric material from outside. Moving system includes industrial wheels or rail & wheel system, recommended according to outdoor or indoor use and spray booth length. A curtain door is designed for closing the door during the painting application. VENTILATION SYSTEM Side draft ventilation provides high efficiency during painting application. The filter wall is manufactured modular from galvanized sheet metal, designed with shelves and emergency door at the two sides. Extraction fan is placed at the top of the filter wall, its electrical motor is placed out of the fan channel and there is no direct contact of the motor with the contaminated air in order to avoid the risk of spark. FILTRATION SYSTEM Extraction filter is used as 2 stages with 99,9% efficiency, placed at the side of the spray booth filter wall. There is a pre-filter at the door curtain that maintains natural airflow inlet during extraction fan is operating. Warning lamp at the control panel indicates service need when the filters get contaminated. Made in Türkiye CE Mark Bjdpfxevxfkaj Aa Ejld We offer the best technical solutions and competitive prices * Office in France and Germany, Contact us for more information and quotations

Condition: new, Step By Step Wet Painting Systems Elboy Industrial Solutions designs and manufactures full range of paint shops for your product. With ELBOY, you can navigate through your facility with virtual reality in the design phase, enabling you to make the desired changes in the design phase and not to encounter the surprise results. It provides designing and manufacturing services for your application by paying special attention to environmental pollution and work safety issues for the processes of Sandblasting, Putty, Washing, Undercoat and Finishing Coat for all sizes of products. Step by Step are systems with overhead conveyor or floor conveyors which can be designed for all sizes of product. Booths of Sandblasting, Chemical Washing, Pre-coat, Drying, Putty , Top Coat and Baking can be integrated into the system. Bedpfody Dw Asx Aa Esld In order to respectively carry out the processes determined by the system step by step, the automatic doors are opened at the end of the time period and the product automatically proceeds to the next process line. These fully automated systems are controlled via a 15” touch screen and provide various reporting methods such as main computer monitoring, product reporting and score reporting upon the demand and provide remote control. These are the paint shops where your product is designed and manufactured by our engineers in line with your capacity, use area and other demands. Maximum efficiency is aimed to be provided with minimum staff and the least space usage at electrostatic powder coating or wet paint, sandblasting, varnishing, coating, washing and similar system requirements.

Condition: ready for operation (used), Year of construction: 2006, Technical Specifications Cutting Width, Max 920 mm 36.22 in Feeding Depth 920 mm 36.22 in Loading Height, Max 130 mm 5.12 in Knife Speed 45 cycles/min 45 cycles/min Smallest Cut, Automatic (without false plate) 25 mm 0.98 in Bodpfx Aaoydip Ue Eeld Smallest Cut, Automatic (with false plate) 90 mm 3.54 in Clamp Pressure, Min 150 daN 331 lbs Clamp Pressure, Max 3,500 daN 7,716 lbs Backgauge Speed (return way) 200 mm/sec 7.87 in/sec Machine Weight approx. 2,000 kg approx. 4,400 lbs Dimensions (Width x Depth) 1,770 mm x 2,030 mm ~69.7 in x ~79.9 in Power Supply 380V (3 Phase, 50Hz typical) Key Features Control Interface: The 92 XT model features a 15-inch color touch-screen display for operation and programming. Programming: It is a high-performance programmable model, suitable for high-end applications, with job-specific programmable parameters, label and distortion correction. Table Features: It typically includes a chromed air table and enlarged side tables to facilitate material handling. Safety: Equipped with safety beam guards (photocells) and an electronic knife lock for operator protection. Backgauge Drive: Features a ball screw drive for the backgauge, ensuring precise positioning. OptiKnife System: Allows for knife replacement from the front desktop, enhancing safety and convenience.

Condition: good (used), Year of construction: 1994, 2 side planer top - bottom constant table ( always same infeed height ) max. planing width 600 mm max. planing height 280 mm planing shafts with strip knives immediately ready for use Bedpfx Aashuthyo Ejld

Year of construction: 2000, condition: excellent (used), Please contact us for more information Blsdjk Nn Ilopfx Aa Esd

Condition: good (used), Year of construction: 2003, load capacity: 150 kg, arm reach: 2,700 mm, Model: KR150 Condition: USED Year: 2003 Bledpfx Aajhakfae Ejd Controller Cabinet: KRC2 Included: Manipulator + KRC2 Control Cabin + All Wire Sets Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brands of KUKA, ABB, FANUC and Motoman.

Condition: new, machine/vehicle number: 3, empty load weight: 9,500 kg, maximum load weight: 29,500 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,550 mm, loading space height: 850 mm, suspension: air, tire size: 245.70 r 17.5, color: white, Year of construction: 2022, Equipment: ABS, factory new ceylan trailer semi-trailers ready for delivery, electro hydraulic double ramps, wideners, rud hooks, 10m platform, h from ground 85cm, also grated ramps, ebs, 3 axles with 1st liftable and 3rd steer-guarantee -CONCESSIONARY INTERDRIVE SRL-PARMA Bljdpfx Aaohzaq Ro Esd