Optical Sorter

Pellenc Mistral 2400

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: contino spezial 260, total length: 10,200 mm, total width: 2,532 mm, total height: 2,487 mm, water consumption per time unit: 4 l/min, input voltage: 400 V, type of input current: three-phase, input frequency: 50 Hz, pressure: 6 bar, temperature: 80 °C, heating capacity: 50 kW (67.98 HP), power: 75 kW (101.97 HP), waste water connection: 50 mm, water pressure: 2 bar, water connection: 25 mm, Equipment: documentation/manual, Machine description - the lids of the crates can be folded down to the side, total transport height approx. 1000 - 1050mm - the two track belts each have 2 guides on the side, one guide each from above and a cam spacing of 700mm - Feed zone with 1500mm straight length with drive, working height approx. 1000mm - Main washing zone with 2700mm length, tank 600l with heating 50kW, (20kW possible via hot water) washing temperature 55-60°C, 1 stainless steel centrifugal pump 7.5kW 1500l/min at 2bar, stable external box filter, brush cleaning takes place after the first spray cleaning with an external brush, then repeated spray cleaning, - 1800mm rinsing zone with approx. 150 - 250l/h via direct fresh water supply, the fresh water is supplied hot at at least 60°C; 500mm feed zone with top suction connection (stainless steel radial fan, DN 250 connection); 1800mm long blow-off with 2 5kW fan motors; 500mm long discharge table Washing, rinsing and drying system length 8800mm Hourly output (adjustable with LENZE frequency inverter) approx. 250-300 crates with hinged lids (cross flow) or 500 lids in longitudinal flow incl. label removal with lateral brushes (LENZE drive 0.37kW) Brush cleaning takes place after the first spray cleaning with an external brush, followed by a second spray cleaning, Additional hot water heat exchanger in the machine, Drum filter for automatic label discharge, with this equipment the dirty water in the main flow is fed through a drum filter, the label dissolution and mash formation is significantly reduced, the washing tank capacity can be used for several shifts without changing Gravity roller conveyor for Euro pallets, internal width 840mm, very stable design made of 4mm thick stainless steel sheet, the rollers are made of galvanized steel 5000mm The machine has the following connections: - Fresh water at approx. 60-80°C 3/4", flow pressure min. 2 max. 6bar via hose connection 3/4" - Electricity: max. approx. 50kW, 400V 50 Hz - Waste water DN 50 discharge into floor drain - Hot water 1 1/4" flow and return, flow temperature min. 80°C, flow rate approx. 3-4m3/h Key advantages of our machines: - completely double-walled, sound and heat-insulated machine housing, manufactured in one piece and completely welded, low energy consumption - reliable operation, very long service life - long washing treatment and nozzle and washing system refined over the years = excellent washing results Bodpfxerr Smlo Aknolp - Nozzle arms can be removed and cleaned without tools, stainless steel nozzles with large passage and optimized droplet size = good cleaning effect + insensitive to soiling - Washing tunnel designed for crate size 300x400x600mm - Use of first-class attachments, e.g. LENZE drive and frequency converter, EDUR stainless steel centrifugal pump, stainless steel ELEKTROR Esslingen blow-off motor with motor separation and SIEMENS switch cabinet components

Year of construction: 2013, operating hours: 25,254 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: S40302, TOMRA AUTOSORT 4 optical sorting system equipped with VIS/NIR technology for the automatic separation of materials based on polymer and/or color. • Working width: 2,000 mm • Hour counter: 25,254 hours Blsdpfx Akszbtvtjnsp • Condition: operational until December 2025 • Current status: disassembled and available for inspection The hour counter indicates 25,254 hours, although a significant portion of these corresponds to periods in standby mode, meaning the actual operating hours of the scanner are lower. Suitable for sorting plastics and other materials using VIS/NIR identification, enabling separation by polymer type and by color.

Condition: good (used), Year of construction: 2005, 1.0 units, used. Shredder including dust extraction system and soundproof housing Manufacturer: RAPID Year of manufacture: 2005 Type: 3590-KL6 Feed opening size: 350 mm x 900 mm Rotor diameter: 900 mm Bledpfj Ahd Tpex Aknep Motor power: 22 kW

Year of construction: 2020, operating hours: 1,157 h, condition: excellent (used), functionality: fully functional, For sale: Kiverco PS123 Waste Sorting Station, fully equipped, in excellent working condition. This high-performance, mobile unit is designed for efficient sorting and recycling of a wide range of materials in construction, demolition, and commercial waste. Key Features: Year of Manufacture: 2020 Operating Hours: 1,157 hours Power Supply: Integrated diesel-electric generator (can be operated autonomously or connected to mains) Condition: Excellent, ready for immediate use (video available demonstrating full operational capabilities) Location: Inspection available upon request Technical Specifications: Sorting Capacity: 10 manual sorting bays (high throughput for increased productivity) Magnetic Separation: Integrated overband magnet for automatic recovery of ferrous metals Air Separation: Windshifter system for efficient separation of light fractions (plastics, paper, etc.) Conveyor System: 1,200 mm wide adjustable picking belt Design: Modular and mobile for quick setup and easy relocation to different processing sites Operator Comfort: Fully enclosed, weatherproof and insulated cabin, equipped with low-energy lighting and optional climate control (heating/cooling) Quick Setup: Hydraulic jack leg system allows rapid, crane-free deployment and secure positioning Safety: Emergency stop switches and manual override at every station Efficiency: Significantly reduces manual labor by automating recovery of ferrous metals and light materials Ideal Applications: - Construction & Demolition Waste (C&D) - Commercial & Industrial Recycling Bledpfx Akoy E Sklsnop - Waste Processing Plants - Municipal Solid Waste (MSW) - Mobile recycling operations

Condition: used, - Documentation available: No Bjdpowh Nacjfx Aknolp - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Year of construction: 2015, condition: good (used), functionality: fully functional, Getecha cutting mill for plastic parts Type: RS 165-A1.5 The cutting mill was used only rarely. It is in used condition visually, but in very good technical condition. Bodpfx Akoz Epgrjnslp The pictures show some minor surface rust in the grinding chamber. This will wear off during the first use. Serial number: 18711 Year of manufacture: 03/15 Wiring diagram no.: ES18711 Connection: 3 × 400 V / N / PE Frequency: 50 Hz Connected load: 2.5 kVA

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: 10258-1, Technical characteristics: - Payload Capacity: Basket size 180x170 mm, Height approx. 150 mm - Tanks capacity: 1 tank 775 L - Washing chamber capacity: 790L - Conveyor velocity: approx. 0.4 m/min - Average load weight approx. 50 kg; maximum 100 kg - Mechanical weight: 4500 kg Electrical Equipment - Operating voltage: 400Vx3 - Connection power: 35 kW / rated current 65A Dimensions - Machine Dimensions (L×W×H): 4000 × 2000 × 2000 mm Equipment consists of: - Main machine LPW, manual loading/unloading (Loading height approx. 930 mm) Blodpfxsxxkk Is Aknop - Three-phase separator approx. 100 L/h for oil separation - Performance: Spray pressure max. 5.0 bar Machine status: WORKING

Condition: used, A crate washing machine with a continuous conveyor system is offered. Equipped with stainless steel housing, conveyor system, internal piping, blower unit and air ducting. Viewing possible by appointment. Bledpfx Ao Agn N Teknjp

Condition: used, functionality: fully functional, Year of construction: 2006, machine/vehicle number: 1106240, ## BRT Recycling Technologie SCHLITZ-O-MAT MSW 1-17 – Bag Opener with Feed Hopper For sale is an industrial bag opener from BRT Recycling Technologie GmbH, model SCHLITZ-O-MAT MSW 1-17, manufactured in 2006, including a feed hopper with a hydraulic push-floor discharge system. The machine comes from our existing recycling and sorting plant and is being offered for sale due to a comprehensive plant modernization. The SCHLITZ-O-MAT was designed for the continuous opening and emptying of filled bags and is particularly suitable for use in recycling and waste sorting plants. The hydraulically driven opening system with tearing fingers opens the bags, largely empties them, and feeds the material for further sorting. ### Technical Data – Bag Opener - Manufacturer: BRT Recycling Technologie GmbH - Model: SCHLITZ-O-MAT MSW 1-17 - Year of manufacture: 2006 - Machine No.: 11 06 240 - Working width: 1,700 mm Bledpfo Ahngzox Aknep - Drum diameter: 1,000 mm - Drive: Electro-hydraulic - Drive power bag opener: 15 kW - Maximum hydraulic pressure: 250 bar - Hydraulic tank: 250 liters - Electrical connection: 3 × 400 V / 50 Hz - Protection class: IP54 ### Throughput according to manufacturer Depending on the material density: - 5 t/h at 50 kg/m³ - 10 t/h at 100 kg/m³ - 20 t/h at 200 kg/m³ - 30 t/h at 300 kg/m³ The actual throughput depends on the material composition and operating conditions. ### Feed hopper with push-floor discharge The scope of supply includes the associated feed hopper with a hydraulic CARG-O-MAT push-floor conveying system. - Hopper volume: approx. 18 m³ - Hopper length: approx. 6,000 mm - Hopper width: approx. 1,714–1,830 mm - Discharge height: 2,390 mm - Conveying speed: max. 1.5 m/min, infinitely adjustable - Drive power: 4 kW - Hydraulic drive ### Dimensions and weight – complete system - Length: approx. 8,800 mm - Width: approx. 2,600 mm - Height: approx. 2,400 mm - Total weight: approx. 11,000 kg - Electrical connection power: approx. 20 kW ### Additional information The machine is characterized by its robust industrial design and the hydraulic bag opening system. The material outlet automatically adjusts to different bag fill levels and varying material quantities. The machine is being offered for sale as part of the restructuring of our existing recycling plant. An on-site inspection in Munich is possible after prior appointment. Technical documents and further information can be provided upon request. If you are interested or have any questions, please do not hesitate to contact us.

Year of construction: 2003, condition: used, functionality: fully functional, input voltage: 400 V, input current: 85 A, continuous power: 45 kW (61.18 HP), Plastic granulator ESMOS type Balkán, version M 500/800, manufacturer ESMOS, Bulgaria. For size reduction of plastic waste, particle size depending on screen. Technical data (per manufacturer's documentation): – Feed opening: 800 × 500 mm – Knives: 6 rotor knives, 4 stator knives – Drive: electric motor 45 kW, 1475 rpm, V-belts – Power supply: 3 × 400 V / 50 Hz, rated current 85 A, 63 A plug – Throughput: approx. 400–800 kg/h depending on material and screen – Extraction outlet Ø 146 mm, protection IP 54 – Weight: 2,750 kg Manufacturer's technical documentation available (see PDF). Bljdpfx Akoz I Izgsnjp Condition: in working order. Inspection and test run by appointment on site (Cheb, Czech Republic). Loading onto truck on site. Sold as is, price net plus VAT.