Heavy duty gearbox

NORD DRIVESYSTEMS GMBH SK9082.1/52

Condition: used, Year of construction: 1966, shaft length 15 - 130 mm wire diameter 6 - 12 mm Credpjv Sva Eofx Ab Tok length of wire blank max. 170 mm capacity/output with closed mould, adjustable 100 /min capacity/output with open mould, adjustable 67 /min Weight 12,5 t dimensions of the machine (WxDxH) 2,3 x 4,0 x 1,6 m combined double-pressure cold header press for jaws and closed moulds maximum wire diameter for high tensile bolts und carriage bolts 10 mm maximum wire diameter for mild steel bolts and rivets 12 mm wire diameter range 6 - 12 mm minimum and maximum shaft length 15 - 130 mm maximum length of wire blank 170 mm capacity/output with closed mould, adjustable - 100 St/min capacity/output with open mould - 67 St/min power requirement 15,0 kW mould dimensions - jaw dimensions 54 x 54 mm

Condition: like new (used), Year of construction: 2022, operating hours: 2,500 h, functionality: fully functional, Used pellet production plant, capacity 2.5 tons per hour complete with belt dryer. Crsdpfxewk Htxs Ab Tjk

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, input frequency: 50 Hz, input voltage: 400 V, power: 1.6 kW (2.18 HP), DGUV certified until: 12/2026, NEW NEW Dough Divider NEW NEW Dough divider for tension-free and oil-free dividing of dough Model: Slim 1400 Cylinder and piston made of high-grade stainless steel Teflon-coated stainless steel container with safety cover Capacity: up to 1,100 pieces per hour Weight range from 200 to 1,400 g (depending on dough type) Only from us: Inspected according to DGUV V3 Electronically variable speed and piece counter Dough divider with manual weight adjustment Discharge belt length: 50 cm Stainless steel construction Machine is mobile with brake Connection: 400V, 1.6 kW, 16A CEE plug Brand new machine & SAB-inspected Crodpfxsrk Eabs Ab Tek Comes with warranty + spare parts service Options: - Leasing & rental service - Discharge conveyor up to max height 1,650 mm - Automatic flour duster - Rounding module - 90 kg hopper - Raised frame - Maintenance contract - Service package - Delivery service - Setup & commissioning with master baker Many more TOP dough dividers in stock!

Condition: refurbished (used), Universal Parta U2001 dough divider for all types of dough, such as: wheat, wheat-mixed, rye, hard (as for pizza) and soft (baguette). Technical data: Bundle weight range: 300 - 2800 g, Csdpfxott Apas Ab Tork Constant/variable capacity: 1020 - 3260/900 - 2816 pcs/h, Max dimensions L x W x H: 1390 x 1080 x 1620 mm, Connection: 230/400 V, 3 phases 50 Hz, 2.8 kVA. Advantages: Suitable for almost all types of dough, Wide weight range: 300 - 2800 g, High weighing precision, Gentle dough processing, Optimal adjustment to the mixer size, Easy to clean, Various settings possible, The dough position on the take-off belt is optimal for transferring for further processing.

Year of construction: 2018, condition: new, machine/vehicle number: DMPMFG200x200, Magnetic filter grid in housing / cabinet construction V2A quality (for free-fall applications to investigate dry and free-flowing bulk solids) Magnetic grid 200x200mm High-quality cabinet construction completely closed Easy cleaning by pulling out the magnetic cores High quality magnetic filter rods completely closed Crodpfx Absdtdwaj Tsk Magnet NdFeB N45, Br 8500 Gauss Tmax 80 ° C 4x M10 threaded rod incl. Wing nut as clamping unit Guide rod center: Entrance level right Outlet below

Condition: good (used), Year of construction: 1981, functionality: fully functional, SINGLE-DIE TUBULAR RIVET HEADER NATIONAL M5 Rebuilt on 2024 Operational, working. Available for any test. Number of die: 1 Number of pieces per min.: 300 Crjdpfstxni Nex Ab Tsk Length Rivet: 20 mm. Depth of Pierce (max.): 5 mm. Cutoff diameter: 5 mm. Floor space (width): 1.300 mm. Floor space (length): 2.690 mm. Power of main motor: 7.5 KW Net weight: 3.100 kg. Gross weight: 3.700 kg.

Condition: used, Year of construction: 2022, operating hours: 13,500 h, functionality: fully functional, nominal power: 50 kW (67.98 HP), For sale is an HKA 49. Included are the wood gasifier, the CHP unit (BHKW), the Energy Block housing the system, and the feed screw including the complete room discharge system. Crsdpfx Aew Spiqjb Tek

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A Cjdpfx Aswp Rqfsb Tsrk • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price:20,000.00 EUR (VAT is not included)

Condition: excellent (used), Year of construction: 2018, operating hours: 8,869 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 305 mm, type of input current: AC, input voltage: 400 V, table length: 4,100 mm, table width: 2,100 mm, pressure: 6,500 bar, rapid traverse X-axis: 17 m/min, rapid traverse Y-axis: 17 m/min, table height: 900 mm, power: 73.55 kW (100.00 HP), Equipment: safety light barrier, Flow Mach 500 4020 - Material Support Area • X-axis ca. 4.100 mm • Y-axis ca.2.100 mm - Net Cutting Area (2 D) • X-axis ca. 4.000 mm • Y-axis ca. 2.000 mm -Precisions Z-axis, programmable, servo-driven, Z-axis travel 305 mm -Cutting head PASER 4 Dynamic Waterjet XD Technology • Beveling and 3D cuts up to 55˚ without taper • Produces 2D and 3D parts with tight tolerances at high speed • 5-axis kinematic system -Pump Intensifire HyperJet 94i-D • 6.500 bar, 75 kW (100 PS), 4,92 l/min • Closed loop cooler • Pump tool kit -Software FlowMaster + FlowExpert -Material Support System + Catcher tank • Stainless steel construction • Waterlevel control module • Prepared for use with an abrasive removal system • Stainless steel slats as workpiece support - Abrasiv Delivery System PASER CF 900 • Garnet capacity 425 kg - Flow UltraPierce Material Piercing Assist (for composites, glass, stone) Crodovvl Ugepfx Ab Tsk -Machine under power, is working -actualy price of new machine with same configuration: 370.000 € -It could be sold the complete still working waterjet job shop company in Poland (real estate, machine park with 3 Flow waterjet cutting systems, base of ca. 160 regular customers, complete company equipment)

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, The Spanner plant consists of the cogenerator and the reformer. The reformer, the heart of the wood chip system, produces natural wood gas from wood chips through a controlled process. This gas is used to operate the cogenerator. The generated thermal energy can be used to heat buildings, drying plants or district heating networks, while the electricity is fed into the grid. Model: HK45 Electrical performance: 45 kW Thermal performance: 120 kW Crjdpfowvhf Tsx Ab Tsk Wood chip consumption: 45 kg/h Requirements for wood chips: Grain size G30-G40 Maximum moisture 15% Fine dust (