Nooteboom OVB-102-06

Nooteboom OVB-102-06

Condition: excellent (used), axle configuration: > 3 axles, loading space length: 15,570 mm, loading space width: 2,520 mm, loading space height: 1,670 mm, total length: 15,570 mm, total width: 2,520 mm, total height: 1,670 mm, suspension: hydraulics, tire size: 295/80 R22.5, wheelbase: 1,650 mm, color: red, Year of construction: 2009, = Further Information = Blsdpsuu Hgwsfx Ab Tsr General Information Year of manufacture: 2009 Axle Configuration Tyre size: 295/80 R22.5 Axle make: SAF Suspension: hydraulic suspension Rear axle 1: Twin tyres; lift axle; Max. axle load: 12,000 kg; steered Rear axle 2: Twin tyres; lift axle; Max. axle load: 12,000 kg Rear axle 3: Twin tyres; Max. axle load: 12,000 kg; steered Rear axle 4: Twin tyres; Max. axle load: 12,000 kg; steered Rear axle 5: Twin tyres; Max. axle load: 12,000 kg; steered Rear axle 6: Twin tyres; Max. axle load: 12,000 kg; steered Weights Unladen weight: 16,960 kg Payload: 85,040 kg Gross vehicle weight (GVW): 102,000 kg Functional Loading platform height: 167 cm Condition Technical condition: very good Optical condition: very good Damages: none Financial Information Price: On request Further information Please contact Stefan Schaapveld for further details.

Year of construction: 1992, condition: good (used), Indoor crane, crane, electric wire rope hoist, hoist, motor winch, motor winch, tackle, traction winch, block and tackle -Manufacturer: steel, crane chassis with electric cable pull -Crane chassis: Type GO 24 20 16 Blsdpfx Abol Tuvds Tor -Traveling speed: 20 m/min -Roller pitch: 800mm -Cable: Type AS 2010 -Traction: 1000 kg / load capacity 4000 kg -Drum speed: 16 m/min / stroke 4 m/min -Lifting height: mm -Transport dimension: 1250/1180/H400 mm -Own weight: 356 kg

Condition: good (used), Year of construction: 1999, Indoor crane, crane, electric wire rope hoist, hand trolley, push trolley, crane trolley, trolley undercarriage, crane undercarriage, trolley, girder undercarriage, overhead track undercarriage -Manufacturer: Steel, crane chassis with electric rope hoist -Cable pull: Type AS 3016-16 2/1 -Load capacity: 3200 kg -Main stroke: 8 m/min -Fine stroke: 1.35 m/min -Traction drive: FA-C 3728 133-1 Bedpfotlzdqox Ab Telr -Travel speed: 5/20 m/min -Roller spacing: 1400 mm, dimensions see photos -Drum speed: 16.0 / 4.0 m/min -Number: 2 crane trolleys available -Price: per piece -Transport dimensions: 1670/1200/H470 mm -Weight: 462 kg/piece

Condition: used, Year of construction: 2018, DEMAG Overhead Crane – 16 Tons Capacity – Year 2018 Manufacturer DEMAG Cranes & Components GmbH – Germany Type Industrial motorized overhead travelling crane – single or double girder Industrial Applications Heavy-duty lifting in steel plants, fabrication workshops, boiler-making, general machining, and logistics warehouses Main Technical Specifications: - Rated capacity: 16 tons (16,000 kg) - Year of manufacture: 2018 - Manufacturer: DEMAG – global leader in industrial lifting - Motorized travel on rails - Electric wire rope hoist (DEMAG standard, high capacity) - Power supply: industrial three-phase - Control: pendant or radio remote (depending on configuration) - Condition: used – recent, robust design 🧩 Machine Usage The DEMAG 16T overhead crane is engineered for heavy-duty lifting in demanding environments. Its high capacity and modern design ensure efficiency, safety, and long-term performance. ⚙️ Features / Differentiators - Medium-high capacity (16T) for heavy industrial operations - Recent build (2018) compliant with modern safety standards Blodjxb D Nvspfx Ab Ter - Integrated DEMAG hoisting and electrical systems - Compatible with automation and remote-control options

Condition: excellent (used), mileage: 117,563 km, fuel type: diesel, color: red, lifting height: 36,500 mm, first registration: 05/2015, mast type: telescopic, Year of construction: 2015, = Additional options and accessories = - PTO (Power Take-Off) = Additional information = Technical Information Number of cylinders: 6 Engine displacement: 6,374 cc Drive: Wheel Dimensions (L x W): 1,103 x 255 cm Functionality Mast length: 35.2 m Lifting capacity: 40,000 kg Superstructure brand: TADANO ATF 40G-2 CE marking: yes Condition Technical condition: very good Visual condition: very good TADANO ATF 40G-2 CRANE CHASSIS: Bodpfxeuxu Dyo Ab Tjlr 279 HP 4x4 drive 117,563 km Automatic transmission Air conditioning, refrigerator Tire size: 445/95/R25 Mercedes-Benz OM 906 LA engine UPPER STRUCTURE: Heating 3 wooden blocks 20t each 1 wooden block 10t Min/max boom length: 10.5 m / 35.2 m Max. lifting capacity: 40,000 kg Maximum hook height: 36.5 m Full counterweight All documents and papers available CE certificate Follow us on Instagram: geurtstrucks We speak German We speak English Hablamos Español

Year of construction: 1994, condition: good (used), Manufacturer: Boge Tip: V LEX 45 Bsdpfjhtq Dvex Ab Tjlr Engine: 45 kW Capacity: 6.5 m3 / min

Condition: used, mileage: 5,874 km, Year of construction: 2021, Serial number: YV2RT60FXKA84xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20511 Specifications: - 2021 model - 5874 km (will increase slightly) - Eu-approved until: 21.02.26 - Euro 6 engine - 8x2 - 551 Hp - Suspension on 1st and 2nd axle: Steel - Suspension on 3rd and 4th axle: air - 2 x 110 liter variable pumps - 2 x manual extensions for main boom and 2 x for jib - Scanreco optical remote control (Top model) - Weight cell main boom - Extra function for main boom and jib - Auto leveling (The car puts itself in a level position ready for lifting.) - Virtual room (Possibility to limit all axes with a few keystrokes, no need to go to a workshop for this. Brilliant when working under high voltage etc.) - SKF central lubrication of the crown and up to the first joint - Extra function fully extended on jib - Single winch hook (Jib / main boom) - 2-part winch hook (Jib / main boom) - 4-part winch hook (Main boom) - Hook for jib - Hook for main boom (Large hook) - Emergency lowering unit (24 volts) - Wire stop sensor and sleeve - 4 ton winch - Diagnostic cable for online help (Remote help) - Danfoss valve center - 2 x 2 ton counterweight (Must only be used for cranes above the cabin otherwise the counterweights are not needed, and these can be removed as needed) - Front support leg Construction: Bjdpfxswphixj Ab Telr - 4 x work lights strategically placed inside each support leg cabinet. - 50" LED bar work light rearward on the cabin - Powerful LED lamps in the crane. - VBG mount, with air servo control unit mounted in the rear cabinet left side. - Bracket on the roof - 2 pcs high beam LED bar on the roof forward (daylight!!). - Orange work warning LED beam on the roof. - EasyUp foldable ladder in the side with railing. - Boxes for chain, chainsaw etc. Mounted on the rear support leg so that these are driven out together with the support leg and are at the same time packed away while driving. - Charger for control in the cabin - Plastic internal screens axle 3 and 4. - 3 edge pull-out cabinet between axle 3 and 4 - On the left side between axle 2 and 3 there is a large cabinet with 500 W fan heater installed to hang clothes to dry etc. - Plane / bottom at the rear closed with alloxed aluminum floor plates that are cut to fit the car perfectly, with rounded edges for a very professional send. - CNC manufactured plates up the rear edge of the cabin. - Fully painted sides, cabin and stern. - Resting cradle for crane for driving without jib. - 5 support leg plates. 4 pcs 80x80x6 cm. placed in dedicated cradles at the rear on the "level" - Right side large cabinet 1.2 x 1 meter - Powerful LED back / work lights at the rear. - Rear part of the car rebuilt with CNC manufactured plates, and beautiful LED taillights have been installed in several stages. - Hatches strategically placed for access to relevant devices under the bodywork. - Precisely cut out fields in the side coverage for access to the screen, manual controls, emergency lowering functions etc. - Marker lights along the side mounted so that they flash together with the turn signals / direction indicators - Cradle to hold the jib when not in use. - Hydraulic extra function dismantled main boom and jib,...

Condition: used, Screw compressor KAESER type BS 50 Serial no.: 402852 Year of manufacture: 1990 Volume flow: 5 m³/min. Operating pressure: 7.5 bar Main motor power: 30 kW Electrical connection: 400 Volt, 50 Hz Connection thread: 1 1/2" inch - 1107.90 hours of operation read - 749.00 load hours read - Sound-insulated Dimensions (L x W x H): 1600 x 1070 x 1350 mm Weight: 900 kg Very good condition Was a reserve compressor and has only few operating hours. Blodsiyu Ifopfx Ab Tsr

Condition: ready for operation (used), functionality: fully functional, Bollegraaf gantry crane 30 tons, 32 meters, 10 meters lifting height Bedpfx Aow S Ea Sob Tjlr

Condition: excellent (used), color: red, Year of construction: 2012, Year of manufacture: 2012 Payload: 1,000,080 kg Extendable structure: Yes APK (Periodic Technical Inspection): Valid until 01/2026 Technical condition: Very good Visual condition: Very good GOLDHOFER THP/ MT/ ST 28 HYDRAULIC AXLE WITH 2X GOOSENECKS, 2X POWER PACKS, 2X DRAWBARS + FRONT SECTIONS THP / MT / ST MODULES: 2X 2-AXLE MODULES 2X 4-AXLE MODULES 2X 5-AXLE MODULES 1X 6-AXLE MODULE 2 HEAVY DUTY GOOSENECKS WITH HYDRAULIC POWER PACKS 2X DRAWBAR CONTROL SETS CENTRAL LUBRICATION SYSTEM BPW HYDRAULIC SUSPENSION AXLE 8 TIRES PER AXLE LINE TIRE REMAINING TREAD APPROX. 50% SIZE 215/75 R 17.5 YEAR OF MODULES: FROM 2009 TO 2012 COMPLETE AXLE SET WITH NEW GERMAN TÜV INSPECTION / APK / MOT PERMISSIBLE GROSS WEIGHT 1008 TONS AT LOW SPEED FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WIR SPRECHEN DEUTSCH Blsdpfxjw D E Tds Ab Tor WE SPEAK ENGLISH HABLAMOS ESPAÑOL