Tipper

Nissan 45.13 + EURO 4 + C patent + tipper + MANUAL

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 3 h, functionality: fully functional, machine/vehicle number: 237042, power: 25 kW (33.99 HP), overall weight: 1,575 kg, fuel type: electric, color: yellow, From my own experience: The battery lasts a whole working day without any problems when continuously charged Internal number: M1241 Manufacturer: Schliesing Vehicle type: trailer chassis Drive type: electric Log diameter: Ø 20 Feed width (mm): 240 Engine power: 25 kW - torque of 120 Nm Year of manufacture: 2023 Operating hours: approx. 3 Own weight (KG): 1575 Equipment: Power Control System - whisper-cut shredding system The Schliesing mid-range is now also available as an electric shredder - the Schliesing 325MX-E shredder. The powerful brushless asynchronous motor with an output of 25 kW and a torque of 120 Nm ensures productive work with the usual pulling power. The batteries are designed to enable a full working day without charging. The 325MX-E enables emission-free chipping with low noise levels and offers uncompromising productivity for logs up to 20 cm in diameter. Engine and chassis: Brushless asynchronous motor with 25 kW and a torque of 120 Nm Fully galvanized, corrosion-resistant single-axle chassis for 80 km/h including EU homologation Robust, solid and widened sheet steel mudguards Solid support wheel at the front and parking support at the rear Towing device with overrun brake and soft dock ball coupling or DIN towing eye LED lighting in accordance with StVZO (impact-protected) Pneumatic tires 205/65 R15 C Battery: LEP battery (lithium iron phosphate) with a capacity of 300 Ah at 96 V Allows the chipper to be used for a full working day without charging. No recharging required during long downtimes Energy recovery through recuperation of the kinetic energy of the chipping disc during the work process Charging connection: protective contact plug 220-240V/16A Charging time for full charge: 8 hours Guarantee for 1000 charging cycles at 80% SOH (State of Health) Housing/hopper/blow-out pipe: Foldable intake hopper with at least 1,500 mm input depth Fully galvanized, corrosion-resistant hopper flap Funnel dimensions (inside): width = 1,040 mm, height = 960 mm Pivoting blow-out pipe with adjustable spreading flap Blow-out pipe on ball bearing slewing ring Kfodjvmz N Uopfx Affsa Relevant machine parts with sound insulation (especially chipper hood and blow-out pipe) Two emergency stop buttons on top of the hopper and on the side of the hopper flap Chipping mechanism: Chipping mechanism with safety circuit according to EN 13525 Robust chipping disc Ø 655 mm, 35 mm thick Closed blade system for quick, safe and precise blade changes Continuously adjustable chipping blades Chipping blades can be resharpened multiple times for a long service life (approx. 10x) Horizontally usable counter blade and vertically usable counter blade, each 2-fold for a long service life Winding protection on the main bearing of the chipping disc Hydraulic feed: Feed control with its own hydraulic circuit PowerGrip feed roller, 240 mm wide, with hydraulic feed. Particularly grippy, aggressive and even feed thanks to one oil motor per roller Parallel-guided top roller for regular and even feed to prevent jamming of the fed material Hydraulically adjustable feed speed and thus the wood chip size Fill level indicator for hydraulic oil tank OPTION OVERVIEW: The Whisper Cut® V-shaped blades feed the wood more evenly and with less vibration In combination with the centering PowerGrip roller, the chopped material hardly swings back and forth

Condition: good (used), TECHNICAL DATA - Main beam: IPE 600 mm (various sizes & load capacities available) - Secondary beam: Sigma 410 mm (220 & 260 mm also available) - Decking: P6 chipboard, double-sided coated, 38 mm Kfodpfxsgpxf Hs Affja - Load capacity: 500 - 1,000 kg / m² - Colour: RAL 9010 Pure White - Condition: used Large quantities available immediately from stock in Nordhorn. The IPE 600 allows for large spans! Scope of delivery: - Columns - Main and secondary beams - Bracing crosses - Flooring PRICES: from €40.00 net per m² Prices may vary depending on design (load capacity and column spacing). Please contact our team for a consultation. Optional accessories - Handrail - Flush wall connection - Staircase - Transfer station - Impact protection YOUR CONTACT PARTNERS: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp TRANSPORT & INSTALLATION We are happy to assist with the transport and installation of the item. Pickup is available. Delivery or shipping can be arranged for an additional charge. Additional costs depend on the delivery location and shipment size and can be quoted individually. PAYMENT TERMS Payment terms are to be agreed upon when placing an order. The price is to be understood as a unit/net price or as stated in the description (plus VAT). Naturally, you will receive an invoice with VAT shown. ABOUT US DLK, based in Nordhorn, supplies new and used products in the areas of warehouse logistics, conveyor technology, mezzanine floors, textile storage, as well as machinery for trade, industry, and crafts. We continuously offer attractive used equipment from various manufacturers/brands at competitive terms. Please feel free to contact us with any questions. Four wins – The DLK success pillars – Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: good (used), ORMA LCC44/14 CONTINUOUS PRESS LINE WITH PREPARATION BELT AND OUTPUT BELT OSAMA TYPE S4R/P-1400 GLUING MACHINE, 4 ROLLERS Kfodpfjvtx Hkjx Affea

Condition: new, Year of construction: 2024, Genie S-45 Trax-XC (Xtra Capacity, up to 454kg load capacity), new, used, demonstration machines available Kfjdpfx Aferpzguefoa

Condition: excellent (used), total width: 1,500 mm, total length: 3,000 mm, Press panels in very good working condition. Kfsdpot Uduxefx Affja

Condition: good (used), overall weight: 5,000 kg, working width: 1,300 mm, plate width: 1,350 mm, Bürkle U140 Veneer Press 4 intermediate plates Plate dimensions: 3050 x 1350 mm Working dimensions: 3000 x 1300 mm 8 hydraulic cylinders Max. surface pressure: 5 kp/cm2 Kodpfoxn Um Eox Affefa Max. operating pressure: 348 bar Heating medium – hot water from central heating Cooling – cooling circuit with WILO pump, expansion tank, piping Weight approx. 5000 kg Plates and hydraulics in good technical condition

Condition: excellent (used), mileage: 186,225 km, power: 110 kW (149.56 HP), first registration: 10/2015, fuel type: diesel, axle configuration: 4x2, wheelbase: 2,800 mm, fuel: diesel, driver cabin: day cab, gearing type: mechanical, emission class: euro6, loading space length: 3,670 mm, loading space width: 2,310 mm, loading space height: 510 mm, Year of construction: 2015, VF6NSTG40E451466 = Further Information = Technical Information Number of cylinders: 4 Engine displacement: 2,953 cc AdBlue system: Yes Maximum front axle load: 2,500 kg Maximum rear axle load: 4,600 kg Dimensions Dimensions (L x W): 579 x 237 cm Weights Unladen weight: 3,273 kg Payload: 3,227 kg Gross vehicle weight: 6,500 kg Condition Kedpfx Afovkp Nkefofa Technical condition: Very good Visual condition: Very good Identification Registration number: 53-BHT-9 Further Information Please contact Sales for more information. = Company Information = If you have any questions or suggestions, do not hesitate to contact us. We guarantee a response within 8 hours. Prices are exclusive of VAT. No rights can be derived from the information provided. Office Phone: MOB: Dutch - English - German - French - Spanish - Italian (Available on WhatsApp and Viber). MOB: Dutch (Available on WhatsApp and Viber). When making payment by bank transfer, the funds must be transferred to our bank account below. Always verify the payment details as listed on our website. If you have received different information, please contact us. If you have any doubts, please call us so we can verify the invoice and/or payment. Bank details: Rabobank Laan van Limburg 2 4701BP Roosendaal IBAN: NL 89 RABO EORI/VAT/TAX: NL857401B(01) BIC/SWIFT: RABONL2U

Condition: excellent (used), Your contact person in our home: Mr: André evening Mr: Marcel Brahms Mr: Simon blank We offer you a used pallet rack beam Nedcon manufacturer for sale to. Technical specifications of the pallet shelf traverse: Shelf system: Nedcon Type: NS Currently available: approx. 5,000 pieces included are included: 01 x pallet shelf beams, used Material color: RAL 2008 bright red orange Box profile: 90 x 40 mm Cage type: 4 hooks Clearance: 1,900 mm maximum load per pair of traverse Kfjdsd A Sm Tepfx Affja 2,000 kg, at gleichm. distributed load 02 x locking pins, used Execution: compl. zinc-plated To secure the beam against unintentional lifting Our services at a glance: (Prices on request) Installation, construction our general conditions of erection are to be observed Shelf testing Shelf inspection according to DIN EN 15635 carried out according to the Requirements of BGR 234 Visual inspection for all shelf systems Delivery with our own fleet of vehicles (without discharge)

Condition: new, empty load weight: 850 kg, maximum load weight: 2,650 kg, overall weight: 3,500 kg, loading space length: 5,400 mm, loading space width: 2,070 mm, tire size: 195/50R13C, Alufelgen, Felge schwarz, Car transporter or multi-transporter from the manufacturer HULCO model CARAX-3 3500 540x207 Go-Getter. The standard equipment of the Hulco GoGetter car trailer includes an aluminum floor, black side panels, black aluminum rims, storage box, LED lights, three-axle trailer, lashing eyes on the outside of the frame, slide-in ramps under the loading area, sloping rear, low chassis, sturdy welded steel frame, support wheel and a V-drawbar. Kfjdpfxeq Rczgj Affja We also offer accessories for Hulco car transport trailers such as high tarpaulin, wheel stopper, support set, car lashing straps and lock.

Condition: good (used), Year of construction: 2010, Arburg 570 H 2000-400 (2010) Clamping force: 200 t Screw diameter: 35 mm Shot weight: 141 g Distance between tie bars V: 570 mm Distance between tie bars H: 570 mm Shot volume: 154 cm3 Screw stroke: 160 mm Injection pressure: 2000 bar Kedpfowpkfcox Affsfa Type: Horizontal Drive: Hybrid Equipment: Thermoplastics cylinder cpl. 35 mm high-wear resistance Drive unit w. 11 kW motor and 21.4 l/min capacity SELOGICA 'direct' controller Air blast system 1 with pressure reducer Interface for robot system (EUROMAP 67), 50-pin AED - electrom. dosage drive 9 electr. heating control circuits for mould heating Interface for colouring device 8 free cooling circuits manually adjustable Position-regulated screw