Incubator Shaker

New Brunswick Innova 4300

Condition: excellent (used), ein ausgesprochenes Einzelstück,ca.12x6 m Pedpjfi Tmcsfx Adnegw

Condition: new, *TECHNICAL SPECIFICATION: Heating power hot circuit: 48 kW heating capacity cold circuit: 12 kW cooling capacity hot circuit: 42 kW cooling capacity cold circuit: 270 kW medium: water up to 200°C Max. external volume: 10 ltr at 200°C Max. flow rate: up to 200 l/min  max. delivery pressure: up to 6,5 bar motor power: 5,5 kW Dimension LxWxH: 1.395 x 753 x 1.180 mm Weight approx. 580 kg *HIGHLIGHTS EQUIPMENT: -regulation and control via SPS with touch screen -heating via stainless steel tubular heating elements made of Incolloy -Heating control via solid-state relay -control box IP54 externally ventilated2 -electrical wiring on terminal blocks -pot. free input for signal for cold/warm changeover (front door) - Pot.-free contact for collective alarm on 3-pin plug-in connector (front door) (front door) -temperature control unit with heating and cooling circuit, for connection of a valve station for quick changeover between hot and cold circuit -temperature controlled feed of the return water -level monitoring with automatic level compensation Psdpfxog Ey Ufs Adnjgw -dirt filter in the cooling water supply and in the return of the circulation system -Separate automatic filling with strainer -Flow measurement in differential pressure principle in both circuits -monitoring of the heating rod surface by temperature sensors -System pressure control, necessary compressed air connection: 6 to 8 bar -booster pump type DS 360 for water make-up -corrosion-resistant components (VA, MS) -unit mounted on rollers and ready for connection *OPTIONS: -System EcoTemp for intermittent operation -connection for ext temperature sensor PT100 or type J/K -Remote touch screen with 15 m cable Visit our website for more details or for other performance classes. *This device is compliant with the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: excellent (used), Year of construction: 2017, operating hours: 8,800 h, laser power: 2,000 W, ONLY approx. 8,700 hours of operation - available immediately Used fiber tube laser cutting machine with automatic feed and discharge Manufacturer: DURMA Model: TC HD-60170 Year of manufacture: 2017 (commissioned in June 2019) Control: Siemens Sinumerik 840 D SL Operating hours: ONLY approx. 8,700 hours Possible cutting variants of the profile: round, square, rectangular TECHNICAL DATA: Max. tube diameter: 170 mm Max. profile dimensions in a square: 120 x 120 mm Max. profile dimensions in a rectangle: 150 x 100 mm Min. tube diameter: 20 mm Max. material length: 6,500 mm Min. material length for automatic loading: 3,000 mm Material length of the last cut: 185 mm Unloading length: 6,000 mm Max. material weight: 37.5 kg/m Max. total workpiece weight: 210 kg Pedpfx Adovylnzonogw Max. bundle weight: 3,000 kg X axis: 90 m/min. Y axis: 50 m/min. Z axis: 45 m/min. A axis: 1200 °/s. Max. cutting thickness: - Structural steel: 8 mm - Stainless steel: 4 mm - Aluminum: 6 mm - Copper: 2 mm - Brass: 4 mm Laser power: 2,000 watts Laser source: IPG Fiber Space requirement: 16,000 x 7,400 mm Machine weight: 20,000 kg EQUIPMENT: - Precitec cutting head (Light Cutter) - Vanterm compact filter system - Automatic weld seam detection - Automatic real-time measuring system for centering chucks AUTOMATION: - Automatic loading system (6,500 mm) - Unloading unit (6,000 mm) - Conveyor belt for unloading including small parts conveyor to the rear SAFETY: - Light barriers Detailed information and the machine layout can be found under Documents for download. Subject to prior sale. Sale excluding any guarantees and within the framework of our general terms and conditions. All statements without guarantee.

Condition: new, Year of construction: 2025, The DURMA AD-S 611600 is a powerful hydraulic press brake that ensures the highest precision and efficiency in sheet metal processing. With a pressing force of 1600 tons and a working length of 6 meters, it is ideal for demanding applications, especially when processing large and thick materials. Technical details: - Model: DURMA AD-S 611600 Pgjdpfx Adevy Srasnsw - Pressing force: 1600 tons - Working length: 6 meters - Condition: As good as new, available immediately Features and advantages: - High bending accuracy thanks to the latest CNC control - Robust construction for a long service life - Flexibility thanks to the backgauge control - Support for heavy and large sheets thanks to the integrated bending aid The machine is available immediately and can be inspected on request. We are happy to provide you with further information or to arrange an appointment.

Condition: not inspected (used), Item: D-10737-Auger Bulk Feeder Stainless Steel Bulk Feeder with weight Pgedohn S Efjpfx Adnew Stainless Steel auger Ø6" (150 mm). Dimension: Bulk L 980 mm X W 980 mm x H 700 mm Auger: Max H 2400 mm Discharge 1900 mm Opening at bulk top: 700 x 700 mm One side at wheels

Condition: new, *TECHNICAL SPECIFICATION: Heating capacity: up to 54 kW Cooling capacity: up to 300 kW medium: water up to 200°C Max. external volume: 43 ltr at 200°C max. Flow rate: max. 230 l/min  max. delivery pressure: up to 8.3 bar Motor power: up to 3 kW Dimensions LxWxH: 1,460 x 525 x 1,200 mm  Weight approx. 330kg Circulation medium connection: flange DN40 (DIN EN 1092-1), form B1 *HIGHLIGHTS EQUIPMENT: -Control and regulation Smart Controller (7" touch display) -Heating control via solid-state relay -Control box IP54, externally ventilated -Expansion tank, heater and piping stainless steel -Heating via stainless steel tubular heating elements made of Incolloy -Dirt trap (circulation) -Unit ready for connection and mounted on castors, 2 of them steerable and with brake -Cooling and filling controlled by solenoid valve -configurable automatic filling via KW inflow or separate connection (factory-supplied via cooling water inflow) -flow measurement by differential pressure principle -Level monitoring by magnetic float switch -automatic temperature-dependent system closure (not with WP7-90) -flow monitoring by recording the flow rate -Bypass between flow and return with reduced cross-section -dirty filter in the cooling water inflow, filling and return of the circulation system -Continuous bypass of the heat exchanger via 3-way motorised control valve (WP7-180/200) -System pressure monitoring via pressure transmitter in the AD tank (WP7-150/180/200) -Pressure booster pump for system filling (WP7-180/200, otherwise optional) -Safety temperature limiter (STB) in the heater and flow (WP7-200) Psdjg Ey T Espfx Adnsgw -Pressure gauge in the supply line on the back of the unit -heat-insulated circulation circuit (WP7-150/180/200) Visit our website for more details or for other performance classes. *This unit is compliant with the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: ready for operation (used), Separator mounted on a stainless steel frame, with feed pump, discharge pump, sludge pump, circulation tank, stainless steel pipes and valve, wired with control box. For the purification of contaminated water. Large water phase, small light phase and dirt phase. No emptying machine !!! Must be opened for cleaning. Time: approx. 5 min. Ready for immediate use. We are happy to answer further questions by e-mail! Pgsdpoqzxzgefx Adnew

Condition: new, Year of construction: 2021, We sell 6 units new pneumatic dispenser in stainless steel inox electro-polished, volume 18 kg, made in Italiy by GMC, model 402E, complete ready to use with : 1 manual high pressure spraygun with adjustable flow, brand Wagner Air, model Colora SP5, 08 mm 1 universal nozzle 1 manometer 1 hose 4 meter lenght 4 system are with high pressure spray gun 2 system have no high pressure spray gun The price for the system with high pressure spray gun is Euro 750 The price for the system without high pressure spray gun is Euro 650 The price for the whole package of 6 units can be: Euro 3.600 Price 750 Euro + VAT, negotiable, FCA and packed Oradea, Romania Please make an offer. Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare Pjdpfx Aotu Enqodnegw

Condition: used, This listing is for the Mettler Toledo Seven Excellence Multi parameter Metre The unit is in full working condition and is ready for immediate use The METTLER TOLEDO SevenExcellence series includes a line of advanced benchtop meters designed for high-precision electrochemical measurements. These meters are ideal for applications in pharmaceuticals, food and beverage quality control, and environmental testing. Key Features Across the Series Measurement Capabilities: Models support pH, conductivity, resistivity, redox/ORP, TDS, salinity, ISFET, ion selective electrodes (ISE), and dissolved oxygen (DO). User Interface & Workflow Optimization: Large touchscreen display for intuitive, efficient navigation. Plain language menu structure eliminates confusion during setup. One-click operation launches one of 17 predefined or 60 customizable methods, boosting throughput. Choose from uFocus™ view, which displays only critical data, or standard view for detailed information including setup and measurements. Data Management: Export results to printers, Excel, or LIMS. Compatible with LabX software for 21 CFR Part 11 compliance and advanced data control. Time and date stamps from a radio-controlled clock ensure compliance with GLP standards. Security & Compliance: User management settings and PIN protection prevent unauthorized method changes. Pgsdjxhgdpjpfx Adnew Integrated Sensor Management (ISM®) pH electrodes are automatically recognized and retain their own calibration data—ensuring accuracy even when electrodes are swapped. Modular and Ergonomic Design: Electrode arm enables easy one-handed operation and precise vertical movement to reduce spills and save time. Modular construction allows for easy upgrades and expansion as your lab's needs change. Connectivity options include USB, Ethernet, and RS-232 ports for integration with PCs and peripheral devices.