Perfect binder

Mueller Martini Prinzbinder 1296

Year of construction: 2006, condition: used, Gaemmeler KL 540 Compensating Stacker with attached blocking device VM 500 The compensating stacker KL 540 is equipped with the proven Gaemmerler LiftPack technology. The KL 540 is suitable for bundle heights up to 300 mm. Nummerous options allow to meet the individual customer requirements. Condition: cleaned and ready for production Technical Data: Cycle time ≥ 1,5 sec. (depending on the copy) ≥ 1,2 sec. with Servo pusher (depending on the copy ) Pagination 4 – 96 Heatset / Gravure Formats A 105 – 330 mm (with rear-eject 105 – 310 mm) B 140 – 500 mm D max. 560 mm Layer height max. 200 mm Bundle height max. 300 mm Weight: 1.500 kg approx. Gaemmerler VM500 blocking unit Cycle time: (approx. 6.7 sec) per pack with a pack height of 300 mm and a blocking time of 2 sec. The cycle time per pack increases when the blocking time is increased and the pack height is reduced. The cycle time is also strongly influenced by the output speed of the compensating stacker and thus by the product (surface, format). Sizes: Width: 140 to 500 mm - 5.5" to 19.7" Hedpfx Aeh Nrh Uog Dsfr Length: 105 to 330 mm - 4.13" to 13" Pile height: 55 to 400mm - 2.16 to 15.7" Inlet height: 890 mm - 35" Outlet height: 890 mm - 35" Connected load: 16A (2KW, 380/480 Volt, 3 phases, neutral) Air requirement: 1000 standard l/min, 6 bar; unoiled, dry air Weight: approx. 500 kg

Condition: good (used), Size max 510 x 305 x 60 mm Size min 140 x 100 x 3 mm Cover size max 642 mm Cover size min 203 mm Hfedpfx Agjd R Ecpj Djr Speed max 12.000 c/h Equipment gathering machine • 18 stations • 18 feeders 3661-210 SF intermediate elements • spiral race away • jogging element perfect binder • 25 clamps • clamp pitch 24" • milling and roughening station • hot melt spine gluing unit • hot melt side gluing unit • premelter • SF stream cover feeder • SF cover nipping and pressing station • lay down device

Condition: used, Year of construction: 1996, Year: 1996 / overhauled in 2008 Technical specifications and equipment: • 8 printing units Material width: 620 mm Printing width: 600 mm Print repeat lengths: 250 – 520 mm Materials processed: • PA: 20 – 60 µm • LDPE: 20 – 150 µm Hfjdpsxfvrwsfx Ag Dor • HDPE, OPP and similar films: 12 – 80 µm, max. 120 µm • Laminated films • Paper: 25 – 120 g/m² Mechanical machine speed: up to 200 m/min (depending on substrate) Main equipment: • Impression cylinder with new nickel-plasma coating • Impression cylinder temperature control unit • Non-stop unwinder with web tension measurement and control, including splice table, roll diameter 600 mm, core ID 76 mm • Nip roller before 1st printing unit • 8 doctor-blade printing stations • Speed assist system • Drive elements from the printing unit to the bridge • Intercolor dryers • Web guiding before printing • Bridge with bridge dryer • Web video inspection system • Edge guiding before rewinding with 3 slitting discs and suction • Non-stop rewinder with pneumatic slitting and web tension measurement and control, roll diameter 600 mm, core ID 76 mm • 8 chamber doctor blades plus 8 additional coated doctor blades • 8 electric pumps, new • 8 ink vessels (10 L each) with hose connections, new • 8 ink catch trays plus 4 extra trays • 1 service trolley for anilox roll and sleeve handling • 1 service trolley for chamber doctor blade and ink tray handling • 8 printing sleeves, new, print length 320 mm, make: Rotec Conductive Blue Light • 8 format gears, new, print length 280 mm • 8 ceramic anilox sleeves, new. Base bodies ordered from Apex. Company Wareg will obtain required sleeve type directly from Apex; only for UniFlex sleeves will Wareg incur the additional costs. • ATEX-compliant • New Siemens S7 control system

Condition: used, machine/vehicle number: 932639 A690, Format trimmed 510x320 mm min 158x110 mm Hjdsbg Hnhjpfx Ag Defr Format trimmed max 500x315 mm min 148x105 mm Power max 14000 c/h min 2000 mm

Condition: used, The GMP PROTOPIC II - 540 Laminator, serial number XK54S30033, is a professional laminating system designed for high-quality finishing applications. With a working width of 540 mm, it accommodates paper sizes up to 540 x 800 mm and as small as 210 x 200 mm, making it versatile for a wide range of production needs. Suitable for paper thicknesses from 120 to 350 g/qm2, the machine ensures consistent lamination results across different substrates. Hedsxb Dn Sopfx Ag Dsfr Currently located in a printshop in Germany, the unit is in good condition without any damage, reflecting careful use and maintenance. Compact, reliable, and efficient, the GMP PROTOPIC II - 540 Laminator is a practical solution for professional print finishing environments requiring durable and precise lamination. Format: 540 mm Equipment: Good condition without any damage Maximum paper size 540 x 800 mm Minimum paper format 210 x 200 mm Paper thicknesses from 120 to 350 g/qm2

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Year of production: 2005 Manufacturer: GUK-Falzmaschinen Griesser & Kunzmann GmbH & Co. KG Machine availability – on request; Hfjderx S Iwepfx Ag Der Machine in use; possibility to carry out work tests during inspections; Good technical condition; Folding machine manufactured by the renowned German company GUK equipped with a high pile feeder (sheet picking with a suction roller from above) FL2-50, 2 folding pockets aggregates, pocket with maximum working widths of 50 cm and mobile chute delivery. Folding machine GUK model FA 50/6-6 FL2-50 – infeed width 500 mm (6+6 folding pockets). Maximum input format: 500 x 850 mm Minimum input format: 105 x 145 mm Minimum folding length: 45 mm Feed rate of sheets from feeder: 40 - 180 m/min Maximum performance: 27.000/from sheet A4 Power supply: 400 V/50 Hz Machine equipment: High pile feeder FL2-50; Batch counter. Multifunction counter programming the operation of the machine. Ability to fold sheets in groups (lots) of the given number in each lot, with stepless adjustment of the spacing between parties. I. folding unit FA 50/6, 6 folding pockets; Sound reduction hood, top. II. folding unit FA 50/6, 6 folding pockets Sound reduction hood, top. Mobile chute delivery S 520. To be added after I or II folding station.

Condition: used, Year of construction: 1981, machine/vehicle number: 5171754, Palettenheber / Pile Hoists - Stack Lift Polar Mohr HL 600Year 1981 - Serial-No. 5171754 Format / Size max. 1100 x 800mm Hebekapazität / Loading capacity max. 600KG Hubhöhe / Lifting height max. 1000mm Hodpoh Ax T Tofx Ag Defr mit Lichtschranke zum automatische Anheben des Schneidgute with light barrier for automatically lifting the material paper Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: excellent (used), Year of construction: 2017, operating hours: 86 h, functionality: fully functional, machine/vehicle number: 5180, Size 63 x 92 cm, V-type feeder, Suction tape feeder board, Preset sidelay, Paper size preset, Ryobi fully automatic plate changers, Plate register remote control, Ryobi PCS-G printing control, PDS-E spectrojet, Ryobi D-matic alcohol dampening system, Ink roller temperature control, Automatic blanket wash, Automatic roller wash. Hfjdpewzvzmefx Ag Dsr

Condition: used, mileage: 229,235 km, power: 96 kW (130.52 HP), first registration: 11/2018, fuel type: diesel, empty load weight: 2,585 kg, maximum load weight: 1,086 kg, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 3,750 mm, fuel: diesel, energy efficiency: D, CO₂ emissions: 187 g/km, fuel consumption (urban): 9 l/100km, fuel consumption (extra-urban): 7.1 l/100km, fuel consumption (combined): 7.8 l/100km, brakes: other, color: white, driver cabin: other, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 2,060 mm, total width: 2,470 mm, loading space length: 3,400 mm, loading space width: 1,770 mm, loading space height: 1,958 mm, Equipment: air conditioning, airbag, cabin, * Engine damage / engine defective * Condition as per photos * Maxi high roof + extra long * 270° rear double doors * Internal dimensions: 3,400 mm x 1,770 mm x 1,980 mm * Wooden floor * Side walls lined with wood and equipped with lashing rails * DIN-compliant lashing rings * Cab with 3 seats * Air conditioning * 6-speed manual transmission * Comfort driver’s seat * Heated seat * Airbag Hjdpfxowc U Afo Ag Dofr * Electric windows * Electrically adjustable, heated mirrors * Wheelbase: 3,700 mm * Gross vehicle weight: 3,500 kg * Unladen weight: 2,585 kg * Payload: 915 kg If you require a new TÜV inspection, we are happy to provide you with a quote from our partner workshops. Our offer generally comes WITHOUT a new TÜV inspection, DGUV, SP, or UVV. You can find more trucks on our website at We speak the following languages: German, English, Polish, Turkish Note: We offer and highly recommend an inspection and examination of the goods to avoid any misconceptions about their condition and suitability. Viewings and inspections are possible at any time by prior appointment and are expressly encouraged. All information is provided without guarantee. We accept no liability for errors or incorrect details in the offer. The buyer is obligated to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale, and errors.

Condition: good (used), Year of construction: 2002, Built in 2002 Size: max 310 x 400 x 80 mm Size trimmed: max 300 x 388 x 80 mm; min 100 x 120 x 2 mm Speed: max 6.000 c/h Feeding height: max 80 mm Air requirement (6 bar): 30 m³/h Length: 2.300 mm Width: 2.200 mm Height: 2.500 mm Weight: 5.700 kg (approx.) Hfjdpfepgwauox Ag Djr Equipment copilot right hand infeed electronic counter 2 sets of knife holders 2 set of knives equipment for changing the format: 1 set of pressing plates & holders 1 set of size extensions 1 set of quick change tables 3 sets of cutting sticks Motorische Formateinstellung automatic setting from: - infeed device - book block pressure - cutting table - side knives - side gauges central lubrication standard accessories