Used Xion Medical for sale (1,099)

Year of construction: 2020, condition: used, This listing is for Lancer 1400 LXP Ultima Laboratory Washer Getinge The unit is in full working condition and ready for immediate use The Lancer 1400 LXP is a freestanding, high-capacity laboratory glassware washer and dryer designed for demanding laboratory environments. It features three wash levels, multiple rack positions, automatic detergent and acid dosing, forced-air HEPA-filtered drying and programmable wash cycles. The chamber has a capacity of approximately 304 litres. Manufacturer specifications list external dimensions of approximately 789 x 831 x 1728 mm and a power requirement of 13.5 kW Bdodpfxoz D Huqs Amrjh Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.

Condition: not inspected (used), Year of construction: 2011, operating hours: 12,000 h, functionality: unexamined, machine/vehicle number: 1200 000043 7, TECHNICAL SPECIFICATIONS CNC control: Siemens Sinumerik 840D Number of axes: 5 axes Travels X-axis travel: 120 mm Y-axis travel: 120 mm Z-axis travel: 200 mm A-axis: -10° to +120° C-axis: 360° continuous Rotary table Diameter: 190 mm Maximum load: 10 kg A-axis speed: up to 100 rpm C-axis speed: up to 150 rpm Spindle Maximum speed: 40,000 rpm Power: approx. 6 kW Maximum power: approx. 7.7 kW Torque: approx. 1.6 Nm High-frequency spindle with ULTRASONIC technology Feed rates Rapid traverse X/Y/Z: up to 10 m/min Tools Tool holder interface: depending on machine configuration Maximum tool length: approx. 130 mm Maximum tool diameter: approx. 49 mm Tool magazine: depending on configuration General data Bdsdpjz Efpcefx Amreh Power supply: 400 V Connected power: approx. 25 kVA Compressed air: approx. 6 bar Machine weight: approx. 1,800 kg TECHNOLOGY The DMG SAUER ULTRASONIC 10 combines high-precision 5-axis CNC machining with ultrasonic-assisted machining technology. This technology is particularly well-suited for machining difficult materials such as: Ceramics Carbide / hard metal Glass Corundum Technical materials and hard and brittle materials Machine particularly suitable for the micromachining, watchmaking, medical/dental, optics, and high-precision application sectors. Subject to errors and changes in technical data.

Year of construction: 2025, condition: like new (used), Manufacturer: ZEISS Model: Stemi 305 Trino Type: Stereo Microscope - Open Box (NEW) Main specifications: Greenough stereo optical system Manual 5:1 zoom range from 0.8x to 4.0x Zoom click stops at 0.8x, 1x, 2x, 3x, and 4x Integrated camera port Fixed 50:50 visual/documentation split Integrated 0.5x C-Mount camera interface Viewing angle: 45 degrees Interpupillary distance: 55-75 mm Free working distance: 110 mm ZEISS 10x/23 focusing eyepieces Integrated near-vertical LED illumination Bdedpfx Amjz E A Rqsrjh Included configuration: ZEISS Stemi 305 Trino microscope body Ref. 435063-9010-000 ZEISS Front Optics 1.5x Ref. 435263-9150-000 Free working distance: 56 mm ZEISS Stand K Ref. 435424-9000-000 250 mm column 145 mm lifting range 76 mm microscope mount Load capacity up to 5 kg Black/white stage plate Dust cover ZEISS Ring Illuminator K LED, segmentable Ref. 435525-9050-000 48 LEDs Working distance: 50-300 mm Full, half, quarter-circle, and opposing quarter-circle illumination modes Adjustable segmentation and rotation ZEISS Controller K LED Ref. 435525-9201-000 12 V DC / 24 W 100-240 V AC / 50-60 Hz Power control and dimming Also included: ZEISS folding eyecups Original cables and accessories Suitable for laboratory inspection, research, quality control, electronics, life sciences, sample preparation, and other stereo microscopy applications. Available immediately from stock in Belgium. Worldwide shipping available. Please contact us for additional pictures, a shipping quotation, or a formal offer.

Condition: excellent (used), METTLER TOLEDO TGA/DSC 3+ Thermal Analysis System Manufacturer: METTLER TOLEDO Type: TGA/DSC 3+ Machine Type: Thermal Analysis System / TGA-DSC / Simultaneous Thermal Analysis Techniques: TGA / DSC / DTA / SDTA For sale is a used METTLER TOLEDO TGA/DSC 3+ thermal analysis system with STARe software, PC system, and Huber Minichiller 300-H OLÉ. The system is suitable for simultaneous thermogravimetric and calorimetric analysis, for investigating mass changes and thermal effects, as well as for material testing, research, development, and quality assurance. Technical Data: Temperature range: approx. 22 °C to 1,600 °C Sampling rate: up to 10 data points/s Sensor output: mass and heat flow Heating rate: approx. 2 to 250 K/min Cooling rate: approx. 0.02 to 50 K/min Weighing range depending on the balance configuration: up to 5 g Resolution depending on the balance type: up to 0.1 µg Integrated gas flow control Sensor options: DSC / DTA / SDTA Software / PC: METTLER TOLEDO STARe software version 16.30 incl. USB dongle PC system with monitor, keyboard, and mouse Adjustment data / system documents as shown in the pictures Huber Minichiller 300-H OLÉ: Temperature range: -20 °C to +100 °C Temperature sensor: Pt100 Heating power at 230 V: 1 kW Cooling capacity at 15 °C: 0.3 kW Cooling capacity at 0 °C: 0.2 kW Cooling capacity at -10 °C: 0.14 kW Cooling capacity at -20 °C: 0.07 kW Refrigerant: R290 Refrigerant quantity: 0.041 kg Max. flow rate: 14 l/min Max. flow pressure: 0.25 bar Mains connection: 220–240 V / 50–60 Hz Max. current draw: 6.5 A Dimensions / Weight: TGA/DSC 3+ depending on the configuration: Standard: approx. 460 × 630 × 320 mm, approx. 29 kg With SmartSens terminal: approx. 460 × 630 × 450 mm, approx. 30 kg With terminal and sample robot: approx. 460 × 630 × 630 mm, approx. 34 kg Huber Minichiller: 225 × 360 × 380 mm (W × D × H) Net weight: 25 kg Equipment: TGA/DSC 3+ STARe software version 16.30 PC system with monitor, keyboard, and mouse Huber Minichiller 300-H OLÉ Gas connections Touch operating unit Accessories and sample sets Adjustment data Documentation Accessories as shown in the pictures Bdsdpfx Ajz Ep Ngsmreh Scope of delivery: 1 × METTLER TOLEDO TGA/DSC 3+ 1 × Huber Minichiller 300-H OLÉ PC system with monitor, keyboard, and mouse STARe software version 16.30 USB dongle Operating unit Documentation and accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures Service markings and nameplates are present. Shipping or freight transport is possible. Subject to changes, errors and prior sale.

Year of construction: 2021, condition: like new (used), machine/vehicle number: 100056463, This is a miniature Büchi B-290 spray dryer (Mini Spray Dryer), a high-quality piece of equipment suitable for various laboratory processes. It is a reliable and efficient tool for your laboratory experiments. Nwebszgw Tljqdtk Ubjl This device is designed to provide consistent and accurate results with each use. Thanks to its excellent features, this spray dryer is ideal for the medical sector, laboratories, health equipment and devices, the dental field, and industrial applications. It is a BÜCHI brand, model B-290 Mini Spray Dryer, serial number 100056463, manufactured in 2021; this equipment is NEW. Take advantage of this opportunity to acquire this exceptional tool and benefit from its practicality and performance. Bdedpfx Aoz E Sq Homrjh 💥 Year-end clearance sale 💥

Condition: good (used), Year of construction: 2023, A pre-owned Optos California ultra-widefield retinal imaging system, acquired in 2024, is supplied in its original Optos transport packaging. Bdodpfx Asz Dq Stsmreh The complete system was purchased in 2024. Some individual components may have manufacture or procurement dates from 2023, which is normal for a multi-component system. Configuration: FA Model: California / P200DTx Manufacturer: Optos Condition: Pre-owned – used during a short clinical study The Optos California platform is designed for ultra-widefield retinal imaging and provides up to a 200° field of view in a single capture. This FA configuration supports fluorescein angiography in addition to the retinal imaging modalities available on the California platform. Included configuration: Scan head Touchscreen tablet & stand Image server with monitor Specialized device table OptosAdvance software Color & Red-free imaging Autofluorescence Fluorescein angiography The system is currently securely packed and palletized for transport. The shipment includes the Optos system and associated device table as shown in the image. Inspection is available by appointment. Worldwide shipping can be arranged.

Year of construction: 2026, condition: like new (used), BINDER KBF 470 – climate chamber – 2026 – like new condition For sale: a professional BINDER KBF 470 climate chamber, manufactured in 2026. The unit is in excellent, virtually factory-new condition. Protective elements from the transport are still attached to the housing and control panel. Device specifications: * Manufacturer: BINDER GmbH, Germany * Model: KBF 470 * Year of manufacture: 2026 * Chamber capacity: approx. 470 l * Maximum temperature: 100°C * Power supply: 220–240 V / 50–60 Hz * Power: 1.40 kW * Max. working pressure of the system: 11 bar * Refrigerant: R600a * Control: modern, touch-screen BINDER controller * Condition: like new / virtually unused Bdsdpoz Dufdefx Amroh The KBF 470 model is designed for precise research under controlled temperature and humidity conditions. It is suitable for use in laboratories, quality control, the pharmaceutical, cosmetic, and food industries, as well as for product stability tests. The greatest advantage of the offered unit is its year of manufacture (2026) and condition, which is close to that of a brand-new device.

Year of construction: 2024, condition: excellent (used), functionality: fully functional, Scaneca 3D body scanner – Modern body measurement, quick and precise, with a permanent license and input devices. Ready to use. The Scaneca 3D body scanner enables quick, non-contact, and detailed capture of the human body. The data obtained can be used for professional body analyses, individual consultations, and a variety of other applications. Your advantages at a glance: Bdsdpfx Amez Erzlereh Fast 3D body capture: The entire body can be digitally captured and measured in a very short time. Detailed body data: Capture of numerous body measurements and proportions for a comprehensive analysis. Non-contact and comfortable: The measurement is carried out without direct body contact, making it particularly pleasant for the user. Digital evaluation: The captured body data is available digitally and can be used for documentation, consultation, and comparative measurements. Comparable results: Ideal for documenting body changes over a specific period and visualizing developments. Versatile applications: Suitable for gyms, personal training, health and wellness centers, fashion, ergonomics, and professional body analyses. Professional presentation: The modern 3D technology offers an innovative added value and enables a clear presentation of the measurement results. Efficient workflow: Body data can be captured quickly and supports structured and individual customer consultation. A modern solution for anyone who wants to make body measurement digital, precise, and professional. Condition: This offer is for a used device, which may show signs of use (minor scratches or yellowing). The device has been tested for functionality. Packaging and shipping: You are welcome to view the device during our business hours. Please arrange an appointment for this! Seaworthy packaging and worldwide shipping are available upon request! For more information, you can of course contact us personally.

Condition: excellent (used), For sale is a professional Thermo Haake C30S Phoenix II laboratory thermostat, designed for precise cooling and heating of liquids and temperature stabilization. The unit can operate as a thermostat bath or a circulator to supply external measurement and research systems. It is equipped with a Phoenix II controller with a clear LCD display, allowing for convenient setting and control of operating parameters. Upon startup, it displays the current temperature and the setpoint value, confirming the correct operation of the controller. Technical data: Manufacturer: Thermo Haake Model: C30S Controller: Phoenix II Controller type: 003-6431 Device type: 003-8195 Power supply: 230 V / 50–60 Hz Current consumption: 9.2 A Refrigerant: R134a Protection rating: IP20 / IP30 RS-232 interface Multi-Port Digital temperature control Connections for external liquid circuit Mobile design with wheels Application: The unit is ideal for: laboratories, quality control, material research, use with laboratory equipment, cooling and heating of measurement systems, temperature stabilization of liquids. Condition: used, functional, controller operates correctly, display is clear, normal signs of use, the tank contains beads to reduce medium evaporation, sold exactly as shown in the photos. Included in the set: Bdjdpfxjzi Tmas Amrjh Thermo Haake C30S thermostat, Phoenix II controller, beads for the thermostat bath, located in the tank.

Condition: used, functionality: unexamined, Used Hammerlift cleanroom gas purge/storage cabinet (“storage cabinet with nitrogen/XCDA flushing system”) Manufacturer: Hammerlit Voltage: 220–240 V Dimensions: 78 x 111 x 233 cm (depth x width x height) Bdedpfeyka Unjx Amreh Multiple units in stock

Year of construction: 2017, operating hours: 500 h, condition: excellent (used), functionality: fully functional, Germany’s leading independent service provider offers: Newest model LPG Systems CelluM6 Alliance Beauty and therapy device Used device, few hours of operation; extremely well-maintained, all accessories included, including operating manual Newest world patent: for body and face Cabin device Like-new pump performance, see pictures List price: €45,900 net and immediately available Prices: net Optional delivery Optional training Bodpodgp Hxofx Amrjdh Leasing may be possible in Germany upon request.

Year of construction: 2020, condition: used, Six identical Rodenstock DNEye Scanner 2+ units are available, five of them available from January 2027, printer: black-and-white printer, screen type: TFT LCD touchscreen, screen size: 10in, WSVGA, 1024x600pixels, spherical measurement range: -20dpt to +20dpt at 12mm vertex distance, cylinder range: 0-8dpt, axis: 0-180°, pupil measurement range: 2-7mm, 3 zones, number of measurement points: 1,400points at 7mm pupil, measurement method: Shack-Hartmann, number of rings: 24, number of measurement points: 6,144, number of analyzed points: 100,000, diopter range: 37.5-56dpt, reproducibility: 0.03mm, method: Placido disc/keratoscope, measurement wavelength: 455nm, no UV light, measurement range: 150-1300µm, precision: under 5µm, method: static Scheimpflug camera, measurement wavelength: 850nm, method: retroillumination, calibrated range: 7-50mmHg, precision: ±2mmHg, length: 530mm, width: 312mm, height: 570mm, weight: 25kg, with documentation. An on-site inspection is possible. Bedpfxsz Eudcj Amrsdh

Year of construction: 2006, condition: used, functionality: unexamined, For sale are 3 Cyrel Fast exposure units from 2006 and one finisher from 2004; the nameplate is shown in a photo. The condition is unverified; they were used sparingly and dismantled and stored several years ago. They can be inspected while powered on or used as a source of spare parts. Bdedpfx Amozd Nqksrsh

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Equipment: documentation/manual, type plate available, Taylor Hobson Talyrond 265 roundness measuring instrument. Extremely accurate; it can measure the roundness of lenses, optics, pistons, turbine components, tubes, shafts, and also eccentricity, e.g., of cams on a camshaft or journals of a crankshaft. It is certainly of interest for motorsport and tuning companies. The first photo is a "representative image" from a Taylor Hobson catalog, showing how it is constructed, except for the computer, which is a newer, more modern HP model with a small form factor. Max. diameter 350 mm Max. test piece height 500 mm (higher values are possible by measuring in two parts, up to a maximum of 1000 mm...) Self-centering of the workpiece +/- 5 mm Bodpfxezcqy Ej Amredh Max. weight of test piece 40 kg The system has been used very little and has had only two owners. The first owner, from whom I bought it, was an implant company in Hamburg; it was used in a "medically clean environment" and is extremely clean. It was never located in a dirty machine hall. The year of manufacture is estimated to be between 2003 and 2005. The Taylor-Hobson measurement software is, of course, included and runs on the supplied HP computer (without a password...). It is also on the USB stick, perhaps for installation on another machine at your location. Accessories are included: the original Taylor-Hobson desk, computer, monitor, seven (7!) measuring probes, each of which is very expensive to purchase. A sample/sample lens (hemisphere) is included for calibration! The very detailed operating manual is on the USB stick, and all circuit diagrams and functional diagrams are also included! The system will be shipped on two Euro pallets via a freight carrier. It is already well secured on them. The Talyrond 265 and the desk will be wrapped with bubble wrap, etc., and secured with stretch film to provide extreme protection during transport. The system itself is fixed with "transport safety screws." Shipping is at the buyer's expense and will be on two Euro pallets. The measuring system should definitely be assembled and put into operation by a Taylor Hobson service technician, who can then also recalibrate the system on-site. This is now recommended after a few years. Errors can be made during assembly and commissioning. For example, some locking screws are installed for transport, and if you forget them, the system could be damaged when starting up. A truly well-maintained, very accurate system that will continue to provide excellent service for many years to come!

Year of construction: 2021, condition: used, functionality: fully functional, Miltenyi Biotec CliniMACS Plus Magnetic cell separator 2020. Bdodst E Hmropfx Amrsh The user-friendly key components of the CliniMACS Plus Instrument offer sophisticated applications for a whole variety of separations. The selected stem cells, monocytes, DCs, NK cells, B cells, and T cell subsets allow research in the field of regenerative medicine, adoptive immunotherapy, and graft engineering. Cells are magnetically labeled in the Cell Preparation Bag using an antigen-specific reagent. Subsequently, the Cell Preparation Bag is connected to the CliniMACS Plus Instrument. Intuitive software facilitates target cell enrichment or depletion as well as final collection in the Cell Collection Bag. The CliniMACS System separates large numbers of cells providing target cells with high purity and excellent yield. Electrical: 100-240V, 50/60Hz, 4 Amps, 350VA Good working condition. Please check out our other listings as well.

Year of construction: 2016, condition: excellent (used), I am selling a Leica RM2255 in very good condition, after inspection. Bdsdpfx Asvygd Rsmrjh

Year of construction: 2021, condition: ready for operation (used), The GatheRex™ Cell Harvest Pump is a liquid handling device designed to work with closed system cell culture devices. The GatheRex connects to closed system devices and uses a low pressure forced air mechanism to remove media, concentrate cells and minimize storage and/or downstream processing. An internal air pump pressurizes the system by pumping air through the sterile vent filter on the cell culture device. When pressurized, excess media, or a cell fraction, is forced out of the device through the tubing assembly then into a collection receptacle. Model 80000Z is designated by black ID tags on the tubing pinch clamps. This version is compatible with large diameter tubing (0.375” OD) for media removal and small diameter tubing (0.160” OD blood transfer bag style) for cell recovery. ELECTRICAL REQUIREMENTS 1. Input: 100-240VAC, ~1.3A, 50-60Hz, Single Phase Fuse Type: 5ET 3.15-R, Cartridge, Time Delay, 3.15A, 250 V, 5mm x 20mm (0.2” x 0.79”), 5ET Series Detachable Power Cord: C13, 18AWG, 10A minimum, Grounded (3 Prong), UL 62, CSA-C22.2 No. 49 IEC / UL: 61010-1 edition 3.1 and 61326-1:2012 Bdjdpfx Amez Dx Sujreh LOW PRESSURE OUTPUT 1. Gauge Pressure: 120 – 180 mmHg (2.32 – 3.48 psi) No adjustments for altitude are needed. 2. Flow Rate: Minimum 5 mL/sec fluid transfer rate from G-Rex M-CS ENVIRONMENTAL CONDITIONS 1. Temperature: 15°C to 35°C (59-95°F) 2. Humidity: ≤ 95% Relative Humidity 3. Altitude: < 2,000 meters (6,561 feet) Good working condition. Please check out our other listings as well.

Condition: good (used), Buchi NIRMaster Spectrometer Bdodpfx Amsz E S Dgsrjh 2015, The Buchi NIRMaster model NIRM54 worlds first dedicated stand alone spectrometer, manufacturer in food grade PMMA. The accuracy and reproducible performance of polarization FT technology plus the hygienic design with certified dust protection meets the easy cleaning processes requested for at-line machinery, with manual

Condition: good (used), Roche COBAS TaqMan + AmpliPrep Amplification Detector Bdedpsu D D E Rofx Amrjh Manufacturer's description; all information is subject to change without notice. Automated real-time amplification and detection analyzer. A high-capacity sample format that enables automated real-time amplification and detection of DNA or RNA for up to four assays simultaneously. In combination with the docking station, this system enables fully automated sample transfer—from the COBAS® AmpliPrep instrument to the COBAS® TaqMan® analyzer. Features Works with the COBAS® AmpliPrep Instrument and Docking Station for complete automation of sample preparation, amplification, and detection. Works undocked with the COBAS® AmpliPrep Instrument. AMPLILINK software provides a simple and efficient user interface for the custom-built Windows®-based PC included with the system. Automated and fully docked systems with COBAS® AmpliPrep/COBAS® TaqMan® HIV-1, HCV, and HBV tests are available. Benefits Higher throughput. Continuous operation maximizes laboratory productivity. 4 independently controlled thermal cyclers. Amplification and detection of RNA and DNA within hours. Quantification standard and closed tube format require no user interaction after sample loading. Reduces the risk of sample contamination. Optimizes workflow. Item condition: used, untested. Supplied as shown. Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items - new and used - in our shop! International shipping costs on request!

Year of construction: 2017, condition: ready for operation (used), 2 units Thermo Scientific Heracell 150i CO2 incubators, No. 439 + 440 Internal dimensions: 450mm x 450mm x 600mm (W x D x H) External dimensions (per unit): 640mm x 820mm x 870mm (W x D x H) Year of manufacture: 2017 Temperature range: 3°C - 55°C Decontamination routine at 90°C. You are welcome to arrange an inspection appointment. We can organise affordable shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued, provided you have a valid VAT ID. Bodpeywxqvsfx Amrodh Subject to prior sale. Visit our shop to view more of our listings. All company names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Technical data may vary and errors in the description of the item may occur; such errors and deviations are reserved.

Condition: like new (used), Lot consisting of a NovaSignal Lucid TCD 2.0 medical system with a NovaBot Automated Headset for transcranial Doppler ultrasound examinations and robotic bilateral positioning of 2 MHz transducers. The system is mounted on a mobile Ergotron/NovaSignal cart. Lot composition: Bodpfjzzpp Uox Amredh • Ergotron/NovaSignal cart, REF NA-ACC10, with wheeled base, adjustable column and supports, work surface, pull-out keyboard tray, monitor arm, shelves, and accessory compartment. Includes the NovaBot Automated Headset NA-RBT1 unit and Type B power cable NA-CORD-B. Equipment weight: 69 kg. • Cybernet CyberMed M156S medical panel PC, P/N 911G590CM156S0, configured as a NovaSignal Accessory Control Unit – ACU, REF NA-ACU1. 12 V DC power supply, complete with an external power adapter. • NovaSignal wired keyboard and mouse kit for Lucid TCD, REF NA-ACC6. • Packaged Lucid TCD diagnostic system, REF NA-TCDSYS2, including a Lucid TCD unit with an integrated display, REF NA-LUCM1, 19 V DC/6.3 A power supply; portable 2 MHz transcranial Doppler transducer NA-PRB1; remote control accessory NA-ACC2; medical Type B 19 V/120 W power supply; connecting cables, and Lucid TCD 2.0 and transducer manuals. • NovaBot Automated Headset robotic components, REF NSC-NBOTSYS: Left Probe Pod NA-PPL1, Right Probe Pod NA-PPR1, Robotic Control Unit NA-RCU1 with 19 V DC/6 A power supply, Headmount NA-RBTHC1 for head mounting, NA-CABSET1 cable set, USB/network adapters, and a second medical 19 V/120 W power supply. The system integrates transcranial Doppler acquisition, control via panel PC, and independent robotic positioning of transducers on both sides of the head. The main components bear CE marking 0459 and are classified as Rx Only. Overall pallet dimensions: 1,200 × 900 × 1,600 mm (height). 6 IDENTICAL UNITS AVAILABLE.

Condition: used, This listing is for Liebherr SN R600a MKUv 1613 Laboratory Refrigerator The unit is in full working condition and ready for immediate use This laboratory refrigerator is a high-quality lab instrument manufactured by Liebherr (Model: Not Specified). Provides reliable, highly stable cooling to safely store temperature-sensitive samples, reagents, and media. It has been sourced directly from a working facility, offering premium performance and dependability for standard laboratory applications while ensuring a cost-effective alternative to purchasing brand new equipment. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: Bjdpfxozuga Do Amrodh This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. Source Pedigree: Biotech / Research Facility Condition: Direct-from-Bench (Decontaminated/Original) Integrity: 100% Original Parts (Non-Refurbished)

Condition: used, functionality: unexamined, machine/vehicle number: Miniload II, Used Leica Miniload II microscope/microhardness tester Manufacturer: Leica Microsystems Bdjdpfx Amoxr Ev Sjreh Model: Miniload II Without its own lighting power supply Equipped with 50x and 10x lenses

Condition: used, This listing is for the MMM Group Vakulab HL Medical Autoclave. The unit is in full working condition and is ready for immediate use. Overview The Vakulab HL autoclave from MM Group Medical is a high-performance, GMP-compliant sterilizer designed for the safe, reliable, and validated sterilization of laboratory instruments, equipment, and materials. Specifically engineered for use in pharmaceutical manufacturing, biotechnology facilities, and research laboratories, the Vakulab HL combines advanced vacuum-assisted steam sterilization with robust stainless steel construction to ensure consistent results in even the most demanding applications. Key Features Advanced Steam Sterilization Pre- and Post-Vacuum Cycles: Ensures efficient steam penetration and rapid drying Optimized Steam Distribution: Uniform sterilization across all load types Programmable Cycles: Fully adjustable parameters for different sterilization needs GMP & Cleanroom Ready Double-Door Pass-Through Design (optional): For installation between clean and non-clean areas Stainless Steel Chamber & Piping: High-grade AISI 316L for corrosion resistance and hygienic operation Integrated Monitoring: Real-time cycle control with full batch documentation capability Operational Safety & Control User-Friendly HMI: Touchscreen interface for programming and monitoring Automatic Door Operation: With safety interlocks to prevent accidental opening under pressure Built-In Diagnostics: Self-check functions for preventive maintenance Technical Specifications The Vakulab HL is a vacuum-assisted steam sterilizer available in multiple chamber volumes, typically ranging from 300 to 1,000 liters. The sterilization process operates at temperatures between 121 °C and 134 °C, controlled via a PLC-based system with an intuitive touchscreen human-machine interface (HMI). The chamber is constructed from AISI 316L stainless steel, ensuring corrosion resistance and compliance with GMP hygienic standards. A water-ring or liquid-ring vacuum pump enables pre-vacuum and post-vacuum phases for thorough air removal and effective drying. Door configurations can be single or double-door in either sliding or hinged formats, with safety interlocks to prevent opening under pressure. The autoclave requires standard utility connections for steam, water, compressed air, and electricity. It is designed to meet EN 285, PED, ISO 9001, and GMP compliance requirements, and can be validated to ISO 17665 sterilization standards. Applications Pharmaceutical Manufacturing: Sterilization of equipment, components, and containers Biotechnology: Sterilization of fermentation vessels, culture media, and instruments Research Laboratories: Sterilization of glassware, tools, and lab consumables Hospitals & Clinical Settings: Safe sterilization of surgical instruments and textiles System Components High-grade stainless steel chamber with polished finish Vacuum pump system for pre- and post-cycle air removal Steam generation and distribution system Control panel with PLC and HMI touchscreen Integrated temperature and pressure sensors for validation Quality & Compliance Manufactured in accordance with GMP guidelines Complies with EN 285 and ISO 17665 sterilization standards Full FAT/SAT/IQ/OQ/PQ support for validation in regulated environments Designed for integration into cleanroom and production facilities Bjdpfoxv Dvfex Amrsdh Benefits Consistent, Validated Sterilization for a wide range of load types Flexible Confi...

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Equipment: documentation/manual, ZEISS GOM ATOS Q Professional 8M – 8M 3D Scanner + MV170/MV350 + ROT350 – Like New _____ For sale is a GOM ATOS Q Professional 8M optical 3D measuring and scanning system, purchased new in 2021. Bsdpfx Amoz D E Enerjdh Complete system includes: • GOM ATOS Q Professional 8M 3D scanner • 8 MP camera system • MV170 measuring volume • MV350 measuring volume • GOM ROT 350 rotary table • Calibration equipment and calibration panel • Original GOM mobile stand with adjustable sensor arm • GOM software with license dongle • System backup • Original GOM documentation and manuals • Original calibration / acceptance documentation • Connection cables and accessories shown in the pictures  The system can be inspected and demonstrated in operation by appointment. The system is in excellent, like-new condition and has seen extremely little use. It was used only a few times for the dimensional inspection of small precision medical plates/components. The system was purchased new and has remained in a professional quality-control environment at a high-precision CNC manufacturing company. The ATOS Q is a professional optical 3D measuring system designed for high-precision dimensional inspection, quality control, CAD comparison, first article inspection and reverse engineering. Due to its extremely limited use, the complete system is in excellent condition and is practically like new. • Year: 2021 • Condition: Extremely low usage - like new – used only a few times for dimensional inspection of small precision components. • Location: Trnovec Bartolovecki, 42202, Croatia • Availability: Immediately • Price: price on request Additional photographs, documentation and technical information are available upon request. Original purchase documentation is available. Manufacturer: GOM GmbH / ZEISS Model: ATOS Q Professional 8M Type: Industrial optical 3D measuring / scanning system