Used Wpf 10 Stiebel Eltron for sale (77,345)

Condition: like new (used), functionality: fully functional, machine/vehicle number: SBO 6/10, Sidel Stretch Blow Moulding Machine Max. output: 6.000 bottles/hour. Max. bottle size: 3.000 cc. Blow stations: 6. Machine is in very good conditioning and well maintained. GENERAL INFORMATION The SBO 6/10 has 6 molds and 10 heating modules. Will work with a wide range of bottle sizes and styles from 0.25 to 3 liters. Sidel 2-step ^PET stretch-blow molders require previously manufactured preforms be supplied to the machine. Separating the bottle manufacturing and preform manufacturing processes allow production to be optimized, provide greater flexibility of operation and use, and provide higher production output rates and yield. MAXIMUM PREFORM DIMENSIONS Neck height 9 – 41 mm (measured from bottom of support ring) Minimum inside diameter of neck 19 mm Maximum outside diameter of neck 34 mm Preform support ring diameter 29 – 51 mm Maximum preform length 210 mm MAXIMUM BOTTLE DIMENSIONS Maximum bottle diameter 130 mm Maximum bottle height 380 mm Bottle capacity 0.25 – 3 liters AVERAGE PREFORM WEIGHTS (non carbonated and carbonated liquids) 0.25 liter bottle 14-20 grams 0.50 liter bottle 20-33 grams 1.00 liter bottle 26-40 grams 1.50 liter bottle 35-51 grams 2.00 liter bottle 44-58 grams 3.00 liter bottle 68-84 grams BLOW WHEEL Height 3.5 meters Number of molds 6 Closing force 10 tons Item height (under neck) at outfeed 1.4 meters approximately Machine DC drive motor power 4 KW HEAT CONDITIONING Height 2 meters Number of oven heating units 10 Number of heating zones per unit 8 Maximum power 170 KW ELECTRICAL USAGE Maximum supplied power 200 KW Average consumption 100-150 KW/hr (varies per bottle being produced) COMPRESSED AIR Supplied power from 7-35 bar Pressure 7 bar Flow rate 50-100 Nm3/hr (varies per bottle being produced) Blow pressure – champagne base up to 25 bar Blow flow rate – champagne base 110-550 Nm3/hr Blow pressure – petaloid base up to 35 bar Blow flow rate – petaloid base 155-770 Nm3/hr CHILLED WATER Temperature 10-12 degrees Centigrade Pressure 5-6 bar Flow rate up to 6 cubic meters/hour Kcal to be removed up to 16,000 Kcal/hour WEIGHT Blow wheel with molds 8 tons Itjdpeg Ailcsfx Afien Heat conditioning unit 2.2 tons Preform feeder 0.65 tons Electrical cabinet 0.85 tons PREFORM HEAT CONDITONING The preforms are transferred neck up to the heat conditioning device. This unit continuously insures the preforms are inverted before passing, neck down, in front of the heating units and then inverts them again. During the heating phase, the preforms are rotated and their necks protected from the heat in order to optimize the distribution of heat without deforming the neck. Heating is insured by 10 heat modules. Each unit can accommodate up to 8 infrared lamps stacked horizontally whose ends are air cooled. The heating power of 8 zones, corresponding to the 8 rows of lamps, can be controlled in order to optimize the heat profile. These zones are regulated on all SBO Models. After heating, a control by infra-red camera of preform temperature enables regulation of the zones under control, thus insuring maintenance of the required temperature.

Condition: used, mileage: 845,000 km, power: 338 kW (459.55 HP), color: white, axle configuration: 4x2, driver cabin: sleeper cab, gearing type: automatic, Year of construction: 2018, Equipment: ABS, air conditioning, cruise control, soot filter, = Additional Options and Accessories = - 12-Volt Power Outlet - Dual Fuel Tank - Electric Windows - Electrically Adjustable Exterior Mirrors - Remote Central Locking - Quiet Operation - Speed Limiter - Center Armrest - Fog Lights - Particulate Filter - Radio - Reversing Camera - Sunshade = Additional Information = General Information Iedpswc Ukcefx Afistn Number of Doors: 2 Technical Information Number of Cylinders: 6 Engine Displacement: 12,900 cc Fuel Type: Natural Gas Weights Curb Weight: 7,977 kg Payload: 11,023 kg GVW: 19,000 kg Maximum Towing Capacity: 41,882 kg Interior Number of Seats: 2 Condition Number of Keys: 3 (2 Remote Controls)

Year of construction: 2001, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 58226018400020, Weiss Temperature Chamber Type: WT11-270/70/10 Section No.: 58226018400020 Itjdpfx Afjv T Tncsien Control: Simcon/32-NET Version: 00.1902 Ports: Left (2x) NW 50 mm, Right (3x) NW 125 mm Temperature Range: -70°C to 180°C Test Chamber Volume: 270 liters Door with window, interior lighting Water-cooled temperature chamber Compressed air dryer type: ZANDER Temperature change rate cooling: 10 K/min Temperature change rate heating: 10.0 K/min Temperature deviation over time ± 0.1 to ± 0.5 K Temperature homogeneity over space ± 0.5 to ± 2.0 K Test Chamber Dimensions: Width 580 mm x Depth 615 mm x Height 750 mm Housing dimensions: Width 895 mm x Depth 2080 mm x Height 1950 mm Voltage: 3/N/PE AC 400V±10% 50Hz Rated power 14 kW, Rated current 26 A Refrigerant: R-404A/R-23

Condition: used, Year of construction: 1969, Fasti guillotine shears type 506/10/2.5 Itjdperhk T Nsfx Afijn

Condition: used, fuel type: diesel, Year of construction: 2023, machine/vehicle number: EXVAC SE.10, RIVARD suction excavator EXVAC SE.10 !! IMMEDIATELY AVAILABLE. !! RIVARD industrial turbine Detachable suction hose inlet 10.5 m³ tank volume 4-joint boom Hydrostatic drive Itjdpfx Aekl N R Asfijn Filter cleaning Rear / front fall protection Camera route monitoring

Condition: used, mileage: 832,000 km, power: 338 kW (459.55 HP), color: white, axle configuration: 4x2, driver cabin: sleeper cab, gearing type: automatic, Year of construction: 2018, Equipment: ABS, air conditioning, cruise control, soot filter, = Additional Options and Accessories = - 12-Volt Power Outlet - Dual Fuel Tank - Electric Windows - Electrically Adjustable Exterior Mirrors - Remote Central Locking - Quiet Operation - Speed Limiter - Center Armrest - Fog Lights - Particulate Filter - Radio - Reversing Camera - Sunshade = Additional Information = General Information Number of Doors: 2 Technical Information Number of Cylinders: 6 Engine Displacement: 12,900 cc Fuel Type: Natural Gas Weights Curb Weight: 7,977 kg Payload: 11,023 kg GVW: 19,000 kg Maximum Towing Capacity: 41,882 kg Interior Iodpfev Ux Ikjx Afiotn Number of Seats: 2 Condition Number of Keys: 3 (2 Remote Controls)

Condition: used, mileage: 69 km, first registration: 08/2023, fuel type: diesel, axle configuration: > 3 axles, gearing type: automatic, emission class: euro6, loading space volume: 10 m³, Year of construction: 2023, operating hours: 8 h, machine/vehicle number: EXVAC SE.10, RIVARD suction excavator EXVAC SE.10 !! IMMEDIATELY AVAILABLE !!! RIVARD industrial turbine Detachable suction hose inlet 10.5 m³ container volume 4-joint boom Iedpfx Afog Dl Areistn Hydrostatic drive Filter cleaning Rear / front fall protection Camera route monitoring

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 723-F07, TECHNICAL DETAILS Maximum device output: up to 24,000 bottles/hour (depending on model) Operating pressure: Standard 4.5 bar ±10 % Noise level: Between 75 and 85 dB(A) ±2 dB according to DIN EN ISO 11204 Container height tolerance Glass containers: ±2.5 mm PET containers: ±2.5 to ±6 mm MACHINE DETAILS Overall dimensions: 3,000 x 2,000 x 2,310 mm Weight: 2,041.2 kg Iedpfx Afjxl Evrsietn Voltage: 230/400 V Frequency: 50 Hz Phases: 3 Current: 10 A Power consumption: up to 8.5 kVA (depending on model) Operating conditions Operating temperature range: +5 °C to +50 °C Operating pressure (production): min. 5 bar, max. 10 bar EQUIPMENT The machine can be operated in synchronization with other devices or independently. Suitable for glass and PET containers with flexible tolerance requirements.

Condition: new, sheet width 1050 mm plate thickness 3.3 mm pre-bending 3.0 mm roll length 1050 mm roll diameter 90.0 mm min. dia. 130 mm engine output 1.10 kW weight 570 kg range L-W-H 1.800 x 800 x 1.130 mm Furnishing: - Robust electro-mechanical bending machine - 2x central rollers driven by an electric motor (top and bottom roller) - Top roller can be swiveled out manually, with folding bearing - including conical bending device - freely movable control panel - Lower roller manually adjustable, by hand wheel - asymmetrical roller arrangement - self-braking main motor - Safety device (safety line with switch unit) - CE mark/Declaration of Conformity Special equipment included in the price: Itedpfx Afew U U Udeijn - hardened rollers - Motorized side roller adjustment - Digital position display for motor-driven adjustable side roller

Condition: used, Year of construction: 2011, Technical details X travel: 660 mm Y travel: 355 mm Z travel: 455 mm Control: WinMax Main spindle: Max. speed: 10,000 rpm Main spindle drive power: 11 kW Tool holder: SK 40 Work table: Iedpfsxpwy Dsx Afistn Table clamping surface: 760 x 355 mm Tool changer: Number of tool positions: 20 pcs. Tool holder: SK 40 Total power requirement: 14 kW Machine weight: approx. 3.5 t Space requirements: approx. 3.5 x 3.0 x 2.6 m Chip conveyor (screw type)

Condition: used, Used mild steel Cumberland blade mill type 56T Granulator Hp 10. Unit has (3) rotor blades. Milling chamber measures 200mm diameter x 1450mm long. Driven by 7.5kW/10HP 380/660 Volt 975 rpm motor. Isdpsxputzsfx Afiotn

Condition: new, Bosch SE-B5.700.020-10.000 brushless servo motor, No. 1070915175 SN, unused in opened original packaging, 100% functional, scope of delivery as per photos, ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Itodpfei D Hd Ssx Afion

Condition: used, Year of construction: 2019, operating hours: 15,551 h, functionality: fully functional, controller manufacturer: Siemens, controller model: SINUMERIK 840D sl, General Year of manufacture: 2019 Operating hours: 15,551 Control: SINUMERIK 840D sl Maximum workpiece dimensions Workpiece length up to 600 mm Maximum cutting circle mm 200 Stroke over center mm 100 Maximum clamping diameter mm 110 Tip diameter mm 30 – 60 Working area Longitudinal stroke Z-axis mm 705 Longitudinal stroke Z-/W-axis mm 705 / 705 Cross stroke X-axis mm 180 Cross stroke X-/U-axis mm 180 / 180 Steady Z3-axis depends on the chuck Workpiece C21-/C22-axis degrees 360 Tool Outer diameter mm 700 Itedpfjwgm Hkox Afion Tool holder Short cone according to DIN 55026: Size: 8 Theoretical diameter of cone mm: 139,735 Tool drum bearing diameter in the front bearing: 160 mm Chuck mount: 180 mm Chuck diameter up to 260 mm Workpiece spindle bearing diameter in the front bearing: 170 mm Guidance system for machining units: Rolling guides with rollers, size 55 Spindle Maximum power at 100% load: 24 kW Spindle speed: 0-2000

Condition: ready for operation (used), - USED - BRIDGE-TYPE MILLING MACHINE WITH MOBILE TABLE AND MOBILE CROSS BEAM LONGITUDINAL TRAVEL: 9000 mm Itedpfx Afoh Stzgsion TRANSVERSAL TRAVEL: 2950 mm VERTICAL TRAVEL: 1250+2200 mm RAPID FEEDS L-T-V: 3 - 3 - 2 m/min TABLE SIZE: 2800 x 8000 (5000+3000) mm MAX ADMITTED LOAD: 64000 Kg SPINDLE: 20 - 600 rpm; 100 kW; 13000 Nm; ISO 60 DISTANCE BETWEEN UPRIGHTS: 3200 mm DISTANCE SPINDLE NOSE-TABLE: 2806 mm OVERALL DIMENSIONS: 21000 x 7800 x 6650 mm ACCESSORIES: GEAR BOX NOTE: No 1 90° HEAD; No 1 REDUCED 90° HEAD; No 1 VERTICAL EXTENSION; No1 TILTING HEAD; 3-STEPS GEAR BOX

Condition: used, axle configuration: 1 axle, wheelbase: 6,300 mm, loading space length: 9,500 mm, loading space width: 2,400 mm, loading space height: 2,130 mm, first registration: 03/2000, suspension: air, color: other, tire size: 385/55R22,5, Year of construction: 2000, Equipment: ABS, tail-lift, = Additional Options and Accessories = - EBS - Tail lift = Notes = Number of axles: 1, Payload: 13,060 kg, Unladen weight: 6,940 kg, Gross weight: 20,000 kg, Chassis type: Complete chassis, Chassis material: Steel, Kingpin size: 2 inch, ABS, EBS, Body year: 2000, Side wall material: Tarpaulin, Axle type: BPW, Tail lift = Further Information = General Information Cab: Day Iodexpm Epspfx Afietn License plate: OG-13-GP Drivetrain Fuel type: Diesel Transmission Gearbox: Manual Axle configuration Tyre size: 385/55R22.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Tyre tread left: 4 mm; Tyre tread right: 8 mm Dimensions Dimensions (L x W x H): 990 x 255 x 380 cm Weights Unladen weight: 6,940 kg Payload: 13,060 kg GVW: 20,000 kg Environment Emission class: Euro 0 Condition General condition: average Technical condition: average Visual condition: average Damage: none = Company Information = Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here you can choose from a constantly changing inventory of 1,200 used trucks, tractors, and trailers. Our range includes all European makes, years, and price categories. Why buy from Kleyn Trucks? Simple! • Large, fast-changing stock • Recognizable quality • A good price • Fair and proper business conduct • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates arranged quickly • Expert technical services • The security of 'recognizable quality' • And much more.... Please visit our website for special offers and the full stock list: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send an inquiry via our website. Ask directly about our European warranty package.

Year of construction: 1999, operating hours: 55,234 h, condition: ready for operation (used), General Data Itjdpfx Asxpkmwjfien Measurements width 2100 mm Measurements depth 2660 mm Measurements height 1780 mm Machine weight 6000 kg Control Unit Model U - 100L Main Drive Number of spindles 2 Spindle speed range 6000 rpm Spindle motor power 7.5 kW Spindle bore 53 mm Movement X-Axis Movement 195 Z-Axis Movement 700 Turret Number of turrets 2 Additional Equipment Number of tools: 12 This 3-axis Okuma LT 10-M horizontal turning machine was manufactured in 1999. It features a maximum turning length of 130 mm and a turning diameter of 210 mm. With a spindle speed of 6000 rpm and motor power of 7.5 kW, it's designed for precision. Ideal for those looking to buy this Okuma LT 10-M horizontal turning machine. Contact us for more information. Application Types Turning

Condition: excellent (used), Year of construction: 2016, ABB IRB4400L-10 IRC5 controller-Low DTC DEVELOPMENT OF GSG ROBOTICS Itsdpfx Afew R Nd Ejien GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc.

Condition: new, Bosch SE-B2.020.060-10.015 servo motor SN:769000003, unused in opened original packaging, 100% functional, scope of delivery as per photos Itedpfoi D Hcfsx Afisn

Condition: used, Year of construction: 2006, weight max. in kg ca. 1.000 kg fork length ca. 1.140 mm stroke height ca. 2.750 mm Jungheinrich HC 110 WP 10 M High lift pallet truck ----- Technical manufacturer's description: Lifting height: approx. 2,750 mm Load capacity: approx. 1,000 kg Overall height: approx. 2,090 mm, Fork length: approx. 1,140 mm ----- (Technical data according to manufacturer - without guarantee!) All prices quoted are net plus VAT. Itodpfx Asxpi Erofisn Translated with (free version)

Condition: new, Bosch SM 5/10 servo module SN:374232 ,unused in opened original packaging, 100% functional, scope of delivery as per photos Itsdpfx Aji D Uflofion

Condition: used, Tenoning spindle 1 St Number of milling agregates 4 St. Spindle diameter 50 mm Control Weinig, PC-Nexus Weinig Unicontrol 10 CNC - Spindles radially and axially CNC-controlled ----- The machine was factory overhauled by Weinig in 2024. The control system was also upgraded to a Siemens S 7 677 C, with a new membrane panel "Touch". With the following machining units: Crosscut saw Itsdpfoxpi Duox Afijn ----- with laser alignment light, motor power 3 kW, spindle diameter 40 mm, spindle speed 3,000 Axially adjustable via NC axis Radial pneumatic adjustment to 8 positions for edge rounding from above Unit from below for edge rounding ----- Axially adjustable with crosscut saw Tenon and slotting spindle ----- Motor power 15 kW Spindle diameter 50 mm Spindle speed 2,925 rpm Tool travel radius min. 380, max. 400 mm Tool clamping length 640 mm Axially adjustable CNC axis Axially adjustable travel 580 mm Adjustment speed 100 mm/sec. 1. Profile spindle (up- and down-rotation) ----- Motor power 11 kW Spindle diameter 50 mm Spindle speed 6,000 rpm Tool clamping length 400 mm with counter bearing Axially and radially adjustable via CNC axis 2. Profile spindle ----- Motor power 11 kW Spindle diameter 50 mm Spindle speed 6,000 rpm Tool clamping length 400 mm with counter bearing Axially and radially adjustable via CNC axis Profile milling unit horizontally mounted on top ----- Motor power 3 kW Spindle diameter 40 mm Spindle speed 9,000 rpm Pneumatically adjustable to 8 axial and radial positions Profile milling unit vertically mounted on the right side Machine end ----- Motor power 3 kW Spindle diameter 40 mm Spindle speed 5,850 rpm Pneumatic adjustment to 8 axial and radial positions Additional accessories ----- CNC-controlled length stop, mounted on the slotting table for lengths up to 3,500 mm, including a positioned cross-cutting saw integrated into the control system. Studio window device, pivots 60° on both sides Double-part package with automatic separation and transfer Synchronization device with automatic window rebating Rebating carriage for rebating small sash widths Air conditioning unit in the control cabinet PC control NEXUS Automatic turning system Slat conveyor, including conveyor belt for returning the workpieces to the operator (Technical specifications according to the manufacturer - without guarantee).

Condition: new, Bosch Rexroth SD-B3.095.030-10 Brushless servo motor SN:570, unused, 100% functional, scope of delivery as per photos Isdpei D E Ruefx Afijtn

Condition: new, GMN TSE 80-16000 / 1.2 high-speed spindle SP: 10-12000 :384568, unused in opened original packaging, 100% functional, scope of delivery as per photos Iodpfsmq H T Hsx Afiotn

Condition: new, müller co-ax 5-PCS-2 10 NC valve with external actuator 24V DC ,unused, 100% functional, scope of delivery according to photos Itedpfei Eb Tajx Afisn

Condition: new, coax 5-PCS-2 10 NC lateral valve,unused, 100% functional, scope of delivery according to photos Iodpfei D Umdjx Afiotn