Used Wind Protection for sale (22,066)

Condition: new, Year of construction: 2019, functionality: fully functional, machine/vehicle number: FA19-63709.1, pressure (max.): 5 bar, CSN instantaneous water heater type 97/DF-100 with 2-stage contactor control Instant water heater: Voltage: 400V 3 Power: 100kW Protection class: 54 Levels: 2x25/ 1x50 kW min/ max. temp.: 0/ +90°C Filling volume: 54 liters Control: Type: 200S01004002451903 S/N: FA19-62758.1 Lsdpfxsvtrlte Affeak Voltage: 400V 3/PE AC 50 Hz Power: 100kW Protection class: IP 43 The instantaneous water heater type 97/DF-100 with STS 2 is a reliable solution for the efficient heating of liquids in industrial processes. With its robust design and precise temperature control, it is ideal for applications where constant and uniform heating is required.

Condition: good (used), Year of construction: 1991, Very good condition. Fully overhauled in 2023. Flat handle unit installed. The machine offers both 1-ply and 2-ply operation modes. It is equipped with slit equipment for the bag bottom formation. Bag width (without handle): min. 160 mm – max. 320 mm Ledpfoxfl Izjx Affeak Bag width (with handle): min. 250 mm (between handle centers) – max. 320 mm Bag gusset (without handle): min. 60 mm – max. 180 mm Bag gusset (with handle): min. 250 mm (between handle centers) – max. 180 mm Bag cutting length (without handle): min. 350 mm – max. 610 mm Bag cutting length (with handle): min. 350 mm – max. 580 mm Roll width: min. 460 mm – max. 1020 mm Maximum roll diameter: outer layer – 1500 mm / inner layer – 1300 mm Core diameter (paper roll): 76 mm Paper grammage: 1 ply – 50-120 gsm / 2 ply – up to 100 + 80 gsm (as produced) Number of forming plates (for bag width): 7 Forming plate sizes: 160, 180, 240, 260, 280, 300, 320 mm Gear sizes (for cutting length): 35, 36, 41, 45, 48, 50, 55, 56, 57, 58, 62 Approximate production speed with handle: 100 pcs/min Approximate production speed without handle (1 ply): 150 pcs/min Approximate production speed without handle (2 ply): 120 pcs/min Total electrical load: 25 kW Paper roll loading mechanism: automatic for outer layer, by forklift for inner layer Machine dimensions (W x L x H): 4.5 m x 13 m x 3.3 m

Condition: good (used), Year of construction: 2002, Manufacturer: BRÜCK Tip: 12/1600 Load capacity: 12000 kg Max sheet width: 1600mm Coil diameter: 1800mm Weight : cca 14 t Lajdpfx Afehrnbkefsk Without control cabinet!

Operating hours: 1,000 h, condition: excellent (used), machine/vehicle number: 4501040, twindisc AM 450 Reggiana Riduttori P 450 B Pumpdrive in perfect condition complete with pumps or without pumps Reggiana Riduttori Ljdpfjc Stxxjx Affsak

Condition: used, Year of construction: 1994, Film width: 1500 mm Thickness range: 25-200 Dosing system: Summit Garvimetric Screw: 90 mm Heating zones: 5 Heating power: 64 kWt approx. Driving system: D.C.11-110 KW Power: 415 Die head: fixed Diameter die head: 350mm Diameter of the gap: 1.25 to 2.25 IBC – yes Air ring type: optifil Lasdpfx Afewgcw Ssfok Die lip gap diameter: 2-50 Calibrating basket: yes with Ultrasonic control Motorized adjusting of calibrating basket in diameter / high: yes Take-off system: Oscillating Number of rolls: 2 Web guiding system: Yes Final roll width: 1650 mm Final roll diameter: 1000 mm Final roll maximum weight: 1 t Rewinder speed: 100 Thickness Control System: Optifil Micro perforator: no Filter changer: Yes(hydraulic) Electrical requirements: 400 A PLC: Siemens Simatic S5-100 U Trim removal system: Rollers Yes-Extract No

Condition: ready for operation (used), bottom wrapper Ljdpfsd Hrpqex Affoak

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 1,200 mm, total length: 1,200 mm, total height: 1,550 mm, overall weight: 270 kg, electrical fuse: 16 A, input voltage: 400 V, power: 7.5 kW (10.20 HP), drive type: Elektromotor, TUKWIND BASIC 7 add-on air classifier with special fan impeller and solid housing design. Our smallest suction fan is suitable for extraction at one suction point. Ideally suited for fine fraction cleaning, Styrofoam extraction, and small screening machines up to 4m drum length. - Optionally can be supplemented with our PUSH blowers to increase efficiency. Lodpfx Aswhfqwoffsak - Easy expansion option as a spot extractor with 10m hand suction hose. Facts: - Compact separation system for mounting on existing screening technology (mobile & stationary) - High suction power - continuously adjustable thanks to built-in frequency converter - Electric drive, hence very low maintenance costs - 7.5kW power requirement; Power plug: 32A CEE (16A fuse sufficient) A wide range of applications is made possible by the robust construction and individual adaptation to conveyor belts, etc. Fields of application: construction waste recycling (Styrofoam, plastic films), composting (plastic films), RDF cleaning (plastics), and more. The device can be purchased either separately or as a complete set. The set includes all necessary accessories such as: extraction hood, hoses, bends, quick clamps, net, etc.

Condition: ready for operation (used), Year of construction: 1986, functionality: fully functional, working width: 1,420 mm, Year: 1986 Width/mm: 1420 Thickness/µm: 14-400 Material: PO, PE, paper, HDPE, LDPE Detail: Plant consists of: 2x Fife edge trim control 2x Ahlbrand MFD 2000 pre-treatment units (year 2001) Lasdpfoxcy Hyex Affek 1x Print Concept UV unit type PC 2w-1600-2x1 (year 2001) Coating unit with individually temperature-controlled rollers. Sleeve system D: 76mm. Several spare parts included.

Year of construction: 2015, condition: reconditioned (used), Agfa Avantra 25,30,44 Spinners Ljdpfxsfm U Eds Affsak -Agfa Avantra 25 spinner, 25.000 RPM, 20.000 RPM -Agfa Avantra 30 Spinner, 30,000 RPM -Agfa Avantra 44 spinner, 13,500 RPM -Agfa GalileoCTP Spinner, 37,500 RPM

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 1,600 mm, total length: 1,600 mm, total height: 2,150 mm, overall weight: 1,140 kg, electrical fuse: 63 A, input voltage: 400 V, drive type: Elektromotor, Attachment wind sifter TUKWIND PRO 18. The combination blower with suction and compressed air in one station. - Compact separation system for attachment to existing screening technology (mobile & stationary) - High suction and compressed air performance – infinitely adjustable by built-in frequency converter - Electric drive, therefore very low maintenance costs - 18.5kW power requirement; power plug: 63A CEE A wide range of applications is enabled by the robust design and individual adaptation to conveyor belts, etc. Lasdpfx Aowhfgrjffjk Ideal size for drum screening machines of the 5-6m class: (SM518, SM620, T5, T50, T6, T60, MAXX, Nemus, Cribus 2800, Cribus 3800, and more) Fields of application: construction waste recycling (Styrofoam, plastic films, wood chips, hard plastic pieces), composting (plastic films), RDF cleaning (plastics), brick chipping cleaning, and more.

Condition: ready for operation (used), Year of construction: 1984, functionality: fully functional, Machine for making paper bags with square bottom Bag width: 45 mm - 125 mm Lajdpfew Nvi Sjx Affek Tube length: 150 mm - 340 mm Gusset: 30 mm - 75 mm Photocell Max reel width: 400 mm In-line 4-color flexo printing unit

Condition: used, Year of construction: 2007, Tenoning spindle 3 St. Number of milling agregates 5 St. Spindle diameter 50 mm Control Control 100 PC SCM Windor 100 CNC ----- Powerful and flexible CNC manufacturing system for windows and doors Processing of workpieces up to a maximum length of 4500 mm, width of 250 mm, and thickness of 150 mm Consists of a Windor 60 model B Infeed conveyor Slotting section: ----- Item 1: Miter saw ----- - Motor 4 kW - 3000 rpm - Spindle diameter 40 mm - Maximum tool diameter 400 mm, bore 80 mm Item 2: 1st slotting spindle ----- - High-performance spindle with top bearing, spindle length 620 mm - Spindle diameter 50 mm - Motor 11 kW - 3500 rpm - Maximum tool diameter 370 mm - Locking device "Jolly" - Continuous vertical positioning - Interpolating rotations, automatic inclined window adjustment +/- 60 degrees Item 3: Electric spindle with HSK 63 F tool holder ----- - Min/max. Rotation speed 1000-12000 rpm - Maximum motor power 11 kW - Water cooling - Rapid 24 automatic tool changer with 24 positions Item 4: 2nd slotted spindle ----- - High-performance spindle with top bearing, spindle length 620 mm - Spindle diameter 50 mm - Motor 11 kW - 3500 rpm - Maximum tool diameter 370 mm - "Jolly" locking device - Continuously variable vertical positioning - Interpolating rotations, automatic inclined window device +/- 60 degrees Lasdpfxew Im Iij Affsk Item 5: 3rd slotted spindle ----- - High-performance spindle with top bearing, spindle length 620 mm - Spindle diameter 50 mm - Motor 11 kW - 3500 rpm - Maximum tool diameter 370 mm - Locking device "Jolly" - Continuous vertical positioning Fleximat ----- Including left and right stops with horizontal CNC adjustment for the following through-feed operations: Lock case milling and 9-degree anuba drilling from the right. Dowel drilling and strike plate marking from the left and right, 7 spindles each. Cup hinge drilling and olive drilling from the top. Profile part ----- Item 5: Power 2000 F4: Electric spindle with HSK 63 F tool holder ----- - Working from the left - Min/Max. Rotation speed 1000-18000 rpm - Maximum motor power 12 kW - Water cooling - Rapid 24 automatic tool changer with 24 positions Item 6: 1st profile spindle from the right ----- - High-performance spindle with top bearing, spindle length 620 mm - Spindle diameter 50 mm - Motor 11 kW - 6000 rpm - Tool diameter min./max. 130-250 mm - Continuously variable vertical positioning - Continuously variable horizontal positioning Item 7: 2nd profile spindle from the right ----- - High-performance spindle with top bearing, spindle length 620 mm - Spindle diameter 50 mm - Motor 11 kW - 6000 rpm - Tool diameter min./max. 130-250 mm - Continuous vertical positioning - Continuous horizontal positioning Item 7: 3rd profile spindle from the right ----- - High-performance spindle with top bearing, spindle length 620 mm - Spindle diameter 50 mm - Motor 11 kW - 6000 rpm - Tool diameter min./max. 130-250 mm - Continuous vertical positioning - Continuous horizontal positioning Item 8: Power 2000 F4...

Condition: used, mileage: 70,800 km, power: 324 kW (440.52 HP), first registration: 11/1982, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: green, gearing type: mechanical, total width: 2,500 mm, total height: 3,600 mm, Equipment: all wheel drive, crane, Heavy-duty all-wheel drive 8x8 tractor unit for heavy trailer loads, recovery operations, etc. Equipped with WSK torque converter transmission, rear trailer load capacity of 100,000 kg, front coupling for shunting, 2 x Rotzler recovery winches each with 200 kN (40,000 kg) pulling force and approx. 50 m cable length, 1 x Rotzler self-recovery winch with 80 kN (8,000 kg) and approx. 55 m cable length, 1 x Rotzler auxiliary winch for reeling out the two recovery winch cables with 6 kN (600 kg) and approx. 100 m cable length. Fitted with 1 x Palfinger loader crane PK 8200A, lifting 3,150 kg at 2.5 m and 970 kg at 7.7 m. Platform length approx. 3,650 mm, side wall height approx. 680 mm, cargo area for ballast and recovery equipment, approx. 13,000 kg steel and ballast weight, climbing ability at 20% incline: approx. 110,000 kg. Fuel tanks: approx. 400 + 210 liters, 10-cylinder turbo water-cooled engine, fording depth: 800 mm. Top condition. Vehicle may have advertising stickers and/or lettering. Ledpfxex Ayy Ts Affsak

Condition: ready for operation (used), Mitsubishi HA300NCB-S Spec NO 74010 + thread damaged + encoder OSA104 J4AVP3X410S, used, good condition, 100% functional, scope of delivery as per photos Laodpfx Ajrbxkuoffjk

Condition: used, mileage: 70,800 km, power: 324 kW (440.52 HP), first registration: 11/1982, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: green, gearing type: mechanical, Equipment: all wheel drive, Heavy-duty all-wheel drive 8x8 tractor unit for heavy trailer loads, recovery operations, etc. Equipped with WSK torque converter transmission, rear trailer load capacity of 100,000 kg, front coupling for shunting, 2 x Rotzler recovery winches each with 200 kN (40,000 kg) pulling force and approx. 50 m cable length, 1 x Rotzler self-recovery winch with 80 kN (8,000 kg) and approx. 55 m cable length, 1 x Rotzler auxiliary winch for reeling out the two recovery winch cables with 6 kN (600 kg) and approx. 100 m cable length. Fitted with 1 x Palfinger loader crane PK 8200A, lifting 3,150 kg at 2.5 m and 970 kg at 7.7 m. Platform length approx. 3,650 mm, side wall height approx. 680 mm, cargo area for ballast and recovery equipment, approx. 13,000 kg steel and ballast weight, climbing ability at 20% incline: approx. 110,000 kg. Fuel tanks: approx. 400 + 210 liters, 10-cylinder turbo water-cooled engine, fording depth: 800 mm. Top condition. Vehicle may have advertising stickers and/or lettering. Lsdpfjx Ayvujx Affeak

Condition: new, Warner Electric ball screw drive total length: 2280 mm, thread length: 2000 mm, thread diameter: 50 mm, pitch: 10 mm, paragraph 1: length: 180 mm, diameter 30/26 mm, paragraph 2: length: 115 mm, diameter 40/37.5 mm, hexagon: SW 32 mm, bolt circle: 95 mm, nut diameter: 75 mm, flange diameter: 110 mm, unused, 100% functional, scope of delivery as per photos. ATTENTION: Please enquire for charges for packing and transport separately! Ljdsxaigwopfx Affeak

Condition: used, mileage: 70,800 km, power: 324 kW (440.52 HP), first registration: 11/1982, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: green, gearing type: mechanical, total width: 2,500 mm, total height: 3,600 mm, Equipment: all wheel drive, crane, Heavy-duty all-wheel drive 8x8 tractor unit for heavy trailer loads, recovery operations, etc. Equipped with WSK torque converter transmission, rear trailer load capacity of 100,000 kg, front coupling for shunting, 2 x Rotzler recovery winches each with 200 kN (40,000 kg) pulling force and approx. 50 m cable length, 1 x Rotzler self-recovery winch with 80 kN (8,000 kg) and approx. 55 m cable length, 1 x Rotzler auxiliary winch for reeling out the two recovery winch cables with 6 kN (600 kg) and approx. 100 m cable length. Fitted with 1 x Palfinger loader crane PK 8200A, lifting 3,150 kg at 2.5 m and 970 kg at 7.7 m. Platform length approx. 3,650 mm, side wall height approx. 680 mm, cargo area for ballast and recovery equipment, approx. 13,000 kg steel and ballast weight, climbing ability at 20% incline: approx. 110,000 kg. Fuel tanks: approx. 400 + 210 liters, 10-cylinder turbo water-cooled engine, fording depth: 800 mm. Top condition. Vehicle may have advertising stickers and/or lettering. Laodpfx Afox Ayyysfok

Condition: ready for operation (used), GMN TSE 75 cdu x 200/30000 high speed spindle, serial no. according to photo, used, normal traces of use, 100% functional, scope of delivery according to photos Lsdpfx Aei Eaa Rsffoak

Condition: used, mileage: 414,323 km, power: 368 kW (500.34 HP), first registration: 06/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: red, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Stability control assistant, lane assistant, adaptive cruise control, power take-off, ABS, ASR, cruise control, starting aid, rear differential lock, reversing camera, multifunction steering wheel, air conditioning, auxiliary heating, rain sensor, heated and electrically adjustable outside mirrors, electric windows on driver and passenger doors, driver's comfort suspension seat, 2x sleeping bed, roof hatch, refrigerator, fog lights, LED daytime running lights, 2 x rotating beacon, lamp bracket, PM crane type: PM 40528 SP, year of manufacture 2018, 4-way outrigger, hydraulically extendable and supportable, radio remote control, 8-level hydraulic. extendable, projection: 4.65m - 6685kg, 8.55m - 3200kg, 10.65m - 2410kg, 15.0m - 1540kg, 17.20m - 1300kg, 19.35m - 1130kg, 21.55m - 1010kg, cable winch, fifth wheel coupling hydraulically movable lengthways, tow coupling, vehicle can be covered with advertising and/or labeled Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we will be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or labeled. Our general delivery and payment terms apply. We would be happy to make you a financing or leasing offer for this object. Ledsvnm U Sjpfx Affoak Please contact us!

Condition: ready for operation (used), GMN TSE 75cdu x 250/15000 high-speed spindle, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Lodsi Eabnspfx Affeak

Condition: used, mileage: 98,050 km, power: 240 kW (326.31 HP), first registration: 09/2011, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: yellow, gearing type: automatic, emission class: euro5, total width: 2,550 mm, total height: 3,650 mm, Equipment: ABS, all wheel drive, crane, Special vehicle for service, rescue, fire department and much more, chassis: 4x4, single tires 60/80% good, cable winch Rotzler TRO30/6 Treibmatic, cable diameter 13mm, cable length approx. 65m, load 60 KN, superstructure: Rosenbauer RLF 1000/100, water tank 1000 liters, foam tank 100 liters, roller shutters, rotating compartments, equipment compartments, lighting, folding steps, reel with hose, power generator GTS 20 power 20 KVA, 400/230 V, 50 Hz, Std. 111, various sockets 32/16/200-250 V, socket at rear, hydraulic lighting mast approx. 6500 mm for 4x1000 W floodlights (without floodlights), Atlas Copco LFX 10 PB, max. output 10 bar, 2.07 cbm/min, PALFINGER crane type: PK8502 B, 2 point outriggers, radio remote control, 3 stage(s) hydr. extendable, max. lifting capacity 5460 kg, diagram: approx. 4.0m - 1960kg, 5.8m - 1260kg, 7.8m - 910kg, 9.9m - 710kg, Palfinger cable winch KBW005 power 11-15 KN, hydraulic side extension of the support legs, electrically extendable roof railing, blue light, siren, reversing camera, ABS, cruise control, diff. locks, exterior mirrors heatable and electrically adjustable, electric windows driver and passenger door, roof hatch, driver standard swing seat Isringhausen, automatic daytime running lights, fog lights, Rockinger trailer hitch, AdBlue tank approx. 35 liters, leaf suspension, new price approx. 500 000 Euro net, super condition Our offer is generally without new TÜV approval. If a new TÜV inspection is required, we will be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or lettering. Our general terms of delivery and payment apply. Ledpfx Aovnmy Isffoak We would be pleased to make you a financing or leasing offer for this object. Please contact us!

Condition: ready for operation (used), GMN TSE 75cdu x 250/15000 high-speed spindle, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Lodpfxoi Eabco Affoak

Condition: used, mileage: 70,800 km, power: 324 kW (440.52 HP), first registration: 11/1982, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: green, gearing type: mechanical, total width: 2,500 mm, total height: 3,600 mm, Equipment: all wheel drive, crane, Heavy-duty all-wheel drive 8x8 tractor unit for heavy trailer loads, recovery operations, etc. Equipped with WSK torque converter transmission, rear trailer load capacity of 100,000 kg, front coupling for shunting, 2 x Rotzler recovery winches each with 200 kN (40,000 kg) pulling force and approx. 50 m cable length, 1 x Rotzler self-recovery winch with 80 kN (8,000 kg) and approx. 55 m cable length, 1 x Rotzler auxiliary winch for reeling out the two recovery winch cables with 6 kN (600 kg) and approx. 100 m cable length. Fitted with 1 x Palfinger loader crane PK 8200A, lifting 3,150 kg at 2.5 m and 970 kg at 7.7 m. Platform length approx. 3,650 mm, side wall height approx. 680 mm, cargo area for ballast and recovery equipment, approx. 13,000 kg steel and ballast weight, climbing ability at 20% incline: approx. 110,000 kg. Fuel tanks: approx. 400 + 210 liters, 10-cylinder turbo water-cooled engine, fording depth: 800 mm. Top condition. Vehicle may have advertising stickers and/or lettering. Lajdpfx Ajx Ayxveffok

Condition: ready for operation (used), GMN TSE 75cdu x 250/15000 high-speed spindle, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Lsdoi Eabkepfx Affsak

Condition: used, mileage: 311,516 km, power: 100 kW (135.96 HP), first registration: 09/1996, fuel type: diesel, overall weight: 8,500 kg, axle configuration: 2 axles, color: blue, gearing type: mechanical, total width: 2,150 mm, total height: 3,650 mm, Equipment: all wheel drive, crane, Traction + mountain winch, WERNERr cable winch F50 with remote control, KLAUS 213 excavator, at 2500 mm - 2200kg, at 5000 mm - 1300kg, reach approx. 6000 mm, grapple 600 + 3000 mm, 4-way outrigger support, cabin, trailer coupling, hydraulic connections, electric tires, vehicle can be covered with advertising and/or labeled Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we would be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or labeled. Our general delivery and payment terms apply. Ledpfxsvnplyo Affoak We would be happy to make you a financing or leasing offer for this object. Please contact us!