Used Weima Wl 3 for sale (93)

Condition: good (used), On offer: A wood shredder by Weima Brand: Weima Model: -- Machine type: Wood shredder / chipper Feed hopper: Large industrial hopper for wood waste Shredding system: Rotor with knife assembly (typical Weima design) Material: Solid wood, panel offcuts, trimmings, scrap Construction: Heavy-duty, welded industrial steel frame Hydraulics: Available (push system for material feed and maintenance) Drive: Electric drive (data available upon nameplate information) Discharge: Wood chips / shredded wood waste 2 screen baskets, one in as-new condition Iodpfx Afox Dx Apofetr Includes several additional new blades

Condition: new, Year of construction: 2024, Super special price, as it was on display at our in-house exhibition. Operating hours: 2 Available immediately - subject to prior sale If gone - then gone Compact design, high reliability and an excellent price-performance ratio excellent price-performance ratio: these are the advantages of this machine, which is perfect for briquetting materials such as wood such as wood, polystyrene, foam or paper. Special feature: the screw pre-compaction, which guarantees a guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. mounted on a stable base frame Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper capacity: 1.1 m³ Drive power: 4 kW Briquette diameter (mm) 40 Throughput capacity (kg/h) 30-40 Hydraulic oil volume (l) 100 Weight (kg) 530 Equipment: Press Powerful pressing mechanism with low-wear, chrome-plated tongs Pre-compressor with end-sensitive cylinder and screwed cover Control box with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Container with agitator and gear motor Itodpfx Afjlht H Esfjr Screw channel with discharge screw and gear motor gear motor Accessories: Briquette length monitoring Automatic on - off Location: 54634 Bitburg

Condition: used, Year of construction: 2018, No. 10027 Single-shaft shredder AMIS / WEIMA WT 15 Used, year of construction 2018, approx. 250 operating hours According to our customer, the machine is fully functional and can be viewed and tested on site Single-shaft shredder for cables, plastics & recycling Feed opening 1500 x 1160 mm LW Rotor width 1500 mm Rotor diameter 368 mm Rotor speed approx. 90 rpm Motor output 90 kW System output 99 kW Power consumption 210 A Voltage 400 V / 50 Hz PLC control Siemens SIMATIC The high-performance shredder in the WT series is ideal for processing a wide variety of plastics - especially difficult, flexible materials such as films, filaments, big bags, tapes, carpets, textiles, foams and all loose and non-bulky waste materials. The WING-RAM swing arm ensures that even contaminated or moist material is fed safely. Incl. angled conveyor belt / discharge belt AMIS FB 7000 x 1500 x 580 / year of construction 2018 / 1.5 kW Incl. magnetic separator AMIS Installation dimensions approx. 9000 x 3500 x 3950 mm LWH Transport dimensions single-shaft shredder approx. 3000 x 2700 x 3200 mm LWH Weight approx. 12500 kg Sale on behalf of customer, ex location near 69123 Heidelberg, without dismantling, without transport and assembly Dismantling, transport and loading by us optionally possible Errors in description and price excepted To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Itodsxwdiujpfx Affer Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: good (used), Year of construction: 2005, functionality: fully functional, power: 18.5 kW (25.15 HP), Weima ECO 600 E Shredder Electric motor: 18.5 kW Drive power via V-belt and gearbox Feed opening: 600 mm x 800 mm Hopper volume: 0.6 m³ Rotor diameter: 252 mm Rotor length: 600 mm Rotor speed: 60 - 100 rpm Screen hole size: 20 mm Ijdpoxf T Hrsfx Affjtr Cutting tools: 14 knives Extraction port diameter: 160 mm Weight: approx. 1,300 kg

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, Briquetting press for wood or wood-like materials Throughput: approx. 80 - 100 kg/h Briquette: 60 mm cylindrical Motor: 7.5 kW Oil heating 6,374 operating hours Dimensions: approx. 2150 x 1700 x 1400 mm Container size: 1400 x 1400 x 920 mm Optional: Iodpfx Ajw Hpizoffstr Extraction unit available as a hopper attachment. Requirements: Ideal input material: chip length less than 25 mm Moisture content: 6–12% ATRO Machine is suitable for intermittent operation, e.g. up to 2 hours briquetting; 1 hour pause, etc. If the machine is to run continuously for more than 2 hours at a time, an optional cooling system must be connected.

Year of construction: 2006, condition: used, Granulators - Cutting Mills Weima WNZ 310/600 22 KW Year: 2006 Power: 22 kW Application: Feed opening: 650x600 mm No. rotor knives: 10 No. stator knives: 2 Rotor-Ø: 310 mm Rotor-width: 600 mm Price: € 12.900,00 Iedpjrl Ru Dofx Affjtr contact: Mr. Rainer Eckerle

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: 990-185, overall weight: 4,500 kg, input current: 80 A, input frequency: 50 Hz, input voltage: 400 V, oil tank capacity: 1,000 l, noise level: 83 dB, Equipment: cooling unit, emergency stop, The WEIMA TH1500 briquetting press compacts all materials suitable for pressing within a single die. The resulting briquette is dimensionally stable and alternately ejected, ensuring smooth and continuous operation. Itsdpfextm Ilox Affjr The axial piston hydraulic pump, powered by a 30 kW motor, produces up to 7 briquette cubes per minute. A distinctive feature of this model is the precision die where the pressing process takes place. The movement sequences of the cylinders and the die are monitored and controlled by a displacement measurement system, ensuring high accuracy, repeatability, and consistent briquette quality. Technical Data: Hydraulic system motor power: 30 kW Operating voltage: 400 V / 50 Hz Nominal current: 80 A Protection fuse: 125 A Current drawn by hydraulic system: 55 A Machine weight: 4500 kg Oil tank capacity: 1000 l Output: approx. 7 briquette cubes/min Other available machines: Serial no. 990-184 – Year 2014 Serial no. 990-224 – Year 2018

Year of construction: 2012, condition: excellent (used), Weima sieve for 4 wave chopper ZM 30 Sieve size: : 20/25 mm Itsdpohh Dpksfx Affsr Location: Ex stock 54634 Bitburg - immediately available -

Condition: ready for operation (used), 🔧 Key Specifications Cutting System: Four-shaft configuration with two cutting shafts and two clearing shafts. Cutting Disc Diameter: Approximately 280 mm (11 inches). Cutting Unit Dimensions: Working width of 1,000 mm and length of 700 mm. Hopper Opening: Approximately 1,400 mm x 1,600 mm. Motor Power: Typically equipped with two 18.5 kW motors. Iodpfx Aewnx Uijffstr Operating Speed: Low-speed operation at around 25 rpm for high torque and reduced noise levels. Weight: Approximately 2,500 kg

Condition: ready for operation (used), Year of construction: 2005, operating hours: 11,192 h, functionality: fully functional, overall weight: 35,000 kg, rotor diameter: 800 mm, number of blades: 70, type of input current: AC, WEIMA FineCut 2500-800 shredder Itedpfx Afjwh Rcfjfor Machine in good working order, used in the production of alternative fuel. Currently out of use, ready for loading.

Condition: good (used), Year of construction: 1992, functionality: fully functional, WEIMA TH 400 briquetting machine - after technical overhaul - Made in Germany - very good condition - year of manufacture 1992 TECHNICAL PARAMETERS: power of main engine 7.5 kW machine output approx. 80 kg/h briquette diameter 50 mm Itedpfx Aet U Et Noffer feeding dimension 2000 x 1800 mm adder feeding the material to the piston stirrer machine overall dimensions (length / width / height) 240 / 190 / 200 cm weight ~ 850 kg TH hydraulic briquetting machines are compact equipment for briquette production. Briquetting machines can be filled manually or automatically directly into the hopper. The units of this series, by their small size and quiet operation, are ideal for setting up on the production floor. Characteristics: - reduction of production waste volume - low purchase costs - low energy consumption - compact design takes up little space - excellent processing quality - durable construction and long service life - trouble-free maintenance and low consumption - simple operation The main application scopes of briquetting presses are, for example: - in combination with a dust extraction or filtration and dedusting plant - for manual feeding of material - as a whole combined with a chipper (e.g. WEIMA WL4) - with a screw feeder or conveyor belt - with a mobile dust extraction system or combustion furnace

Condition: new, Year of construction: 2024, New machine Year of construction: 2024 Equipment and technical data: Right-hand version Technical data: Overall dimensions: 1,900 x 1,410 mm Hopper opening: 1,044 x 1,044 mm Hopper height: 1,010 mm Hopper capacity: 1.1 m³ Drive power: 5.5 kW Briquette diameter: 50 mm Hydraulic oil: 160 l Throughput: up to 50 kg/h (depending on material) Paint finish: Weima Standard Connected load: 400 V +/- 5 % / 50 Hz including: Itodpfxjt Hagnj Affsr Press mechanism with filling cylinder, main cylinder, gripper cylinder Connecting part for transport line Chrome-plated tongs Hydraulic tank 160 l with pump motor + valve control Safety switch for oil temperature Base plate 1,040 x 1,040 mm with agitator + motor and screw channel Screw channel Discharge screw + motor Side walls standard height 1,010 mm Base frame with rubber feet Switch cabinet on hopper and electrical control system Briquette length monitoring Automatic end position of all cylinders Manual control Automatic "On/Off" with level switch Material: Wood shavings, sawdust from solid wood, loose, clean and free of foreign matter*/ Dimensions: max. 12 mm Throughput capacity: approx. 50 m³/year/ * Specification foreign matter: Everything except wood, pieces of wood larger than 12 mm. The throughput capacity is highly dependent on the material. Average values are given. Depending on mixing ratio, moisture and material properties! Application not or not fully known/specified. Machine is sold appropriately and sold by the specialist dealer in accordance with the solution. In the event of heat build-up, the running time can be drastically reduced in accordance with the heating. Availability: short term Storage location: Solingen

Condition: like new (used), Year of construction: 2025, operating hours: 1 h, Super special price, as it was on display at our in-house exhibition. Operating hours: 1 Available immediately - subject to prior sale If gone - then gone Compact design, high reliability and an excellent price-performance ratio excellent price-performance ratio: these are the advantages of this machine, which is perfect for briquetting materials such as wood such as wood, polystyrene, foam or paper. Special feature: the screw pre-compaction, which guarantees a guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. mounted on a stable base frame Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper capacity: 1.1 m³ Drive power: 4 kW Briquette diameter (mm) 40 Throughput capacity (kg/h) 30-40 Hydraulic oil volume (l) 100 Weight (kg) 530 Equipment: Press Powerful pressing mechanism with low-wear, chrome-plated tongs Pre-compressor with end-sensitive cylinder and screwed cover Control box with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Container with agitator and Iedpfjtnz Ttsx Affetr gear motor Screw channel with discharge screw and gear motor gear motor Accessories: Briquette length monitoring Automatic on - off Location: 54634 Bitburg

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 Technical data: Hopper opening: 600 x 800 mm Hopper volume: approx. 0.6 m³ Rotor working width: 600 mm Rotor diameter: 260 mm Drive power: 15 kW Rotor speed: 90 rpm Number of knives: 14 pcs + 2 pcs Type and size of knives: concave / 40 x 40 mm, reversible knives concave / 30 x 30 mm, scraper knives Screen perforation: 15/20 mm Paint finish: RAL 5010 / 7016 Connection value: 400 V +/- 5 % / 50 Hz Included: Control cabinet (Rittal) incl. 5 m cable Electrical control system (Moeller / Siemens) Star-delta start, rubber vibration dampers E-rotor with machined knife pockets Gearbox limit switch 1st knife row Hold-down device on slide for long and large parts Special scraper knives to prevent lateral jamming Weight: 1100 kg Iedpfjvymdwsx Affetr Availability: short-term Storage location: Flörsheim

Condition: new, Year of construction: 2024, Weima Briquetting Press TH 714 The TH 714 machines are designed for plants with required throughput rates of up to 150 kg/h. The stable press housing enables the production of high-strength briquettes - from materials such as wood, polystyrene, foams, light metals, paper or biomass. Numerous additional options can be implemented, e.g. oil cooling for multi-shift operation. All machines are available as left- or right-hand version. Mounting on a stable base frame ensures fast installation and makes mobile use possible. User-friendly operation thanks to Siemens PLC control In order to live up to our performance promise, we design and produce all control cabinets ourselves at our Ilsfeld site and equip them with well-known international components. This guarantees highest quality with compact design. The used PLC-control from Siemens is perfectly adapted to the requirements of the briquetting process. Impurity-resistant screw conveyor due to cardanic suspension Itedoil Hggjpfx Affjr The screw conveyor, which transports the material into the pre-compressor of the briquetting press, is suspended on a cardan joint. This prevents interfering materials from causing damage to the screw conveyor. As is so often the case, however, it always depends on the specific application which suspension is chosen. For metal applications, for example, we often recommend rigidly mounted screws. Briquette diameter (mm): 70 Throughput capacity up to (kg/h): 150*1 Hydraulic motor (kW): 11 Oil quantity (liters): 250 Weight (approx. kg): 1100 Location: Ex stock 54634 Bitburg - immediately available - subject to prior sale

Condition: new, Year of construction: 2024, your benefits Ijdocnz U Ejpfx Affetr Sturdy press mechanism with low-wear, chrome-plated tongs Pressing chamber wear bush Pre-compressor with end-position-sensed cylinder and screwed cover Control box with SPS-control Screw channel with discharge screw Separate oil tank with pump motor and valve control Safety switch for oil temperature Mounting on stable base frame with rubber feet Briquette quantity monitoring Robust construction, low-maintenance technology, little space requirement: The machines of the C-series are particularly suitable for small and medium-size enterprises, whose required throughput does not exceed 50-80 kg/h or 200 to 400 kg/day. Practically any suitable material can be briquetted, e.g. wood, polystyrene, foam, paper or biomass. All machines are available as left- or right-hand version. The mounting on a stable base frame ensures a quick installation and makes mobile use possible. Briquette diameter (mm) 50 Throughput capacity up to (kg/h) 50 (depending on material) Hydraulic motor (kW) 5,5o Screw motor (kW) 0,55 Oil quantity (litres) 100 Weight (kg approx.) 800 Outstanding features at a glance Hydraulics with separate oil tank: temperature-controlled hydraulic unit, complete valve control, pump motor for long running times Briquette length monitoring: regulates the length of the briquette to a constant level Pressing area wear bush: Prevents wear in the pressing area Location: Ex works - free loading

Condition: new, Year of construction: 2024, Compact design, high reliability and an excellent price-performance price-performance ratio: these are the advantages of this machine machine, which is perfectly suitable for briquetting materials such as wood, polystyrene, foam or paper. Special feature: the screw pre-compaction, which guarantees a high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. mounted on a sturdy base frame Overall dimensions: 1900 x 1410 mm Hopper opening: 1044x1044 mm hopper height: 1010 mm hopper capacity: 1,1 m³ driving power: 4 kW Briquette diameter (mm) 40 Throughput capacity (kg/h) 30-40 Hydraulic oil capacity (l) 100 Weight (kg) 530 Equipment: Press Iodpfxobtnf Ee Affetr Powerful press mechanism with low-wear, chrome plated tongs Precompressor with end-position-suspended cylinder and screwed cover Control box with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Tank with agitator and gear motor Screw channel with discharge screw and gear motor gear motor Accessories: Briquette quantity monitoring Automatic On - Off Location: 54634 Bitburg

Condition: like new (used), Year of construction: 2025, operating hours: 1 h, Super special price, as it was on display at our in-house exhibition. Operating hours: 2 Itedstnz Hbopfx Affer Available immediately - subject to prior sale If gone - then gone Compact design, high reliability and an excellent price-performance ratio excellent price-performance ratio: these are the advantages of this machine, which is perfect for briquetting materials such as wood such as wood, polystyrene, foam or paper. Special feature: the screw pre-compaction, which guarantees a guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. mounted on a stable base frame Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper capacity: 1.1 m³ Drive power: 4 kW Briquette diameter (mm) 40 Throughput capacity (kg/h) 30-40 Hydraulic oil volume (l) 100 Weight (kg) 530 Equipment: Press Powerful pressing mechanism with low-wear, chrome-plated tongs Pre-compressor with end-sensitive cylinder and screwed cover Control box with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Container with agitator and gear motor Screw channel with discharge screw and gear motor gear motor Accessories: Briquette length monitoring Automatic on - off Location: 54634 Bitburg