Used Weighing System for sale (990)

Year of construction: 2003, condition: excellent (used), machine/vehicle number: 5479, REF: MM6231 Weighing and bagging system which has previously been used to pack 1.8kg and 2kg bags of grated cheese, comprising of: 1 x Bilwinco A/S 14-head weigher fitted with dimple pans and PLC control panel. Technical specification ⚙️ ✅ Model - BW114-W. ✅ Serial number - 5479. ✅ Date of manufacture - 2003. ✅ Weighing range - 10g to 1000g, per drop. ✅ Electrical requirements - 400 V / 50 hz / 3 phase. ✅ Power - 10 Amps. ✅ Compressed air - 8-10 bar. 1 x Stainless-steel purpose-built gantry structure. Overall dimensions - 1750mm long/deep x 2320mm wide x 3500mm high. 1 x Sandiacre Packaging Machinery Limited vertical form, fill and seal bagging machine with Allen-Bradley touch-screen control panel and supplied with 2 x forming tubes. This machine has vacuum and gas-flush sealing functions. Technical specification ⚙️ ✅ Model - TG400LDK. ✅ Serial number - 2607. Cjdpjxnivusfx Ab Tshf ✅ Date of manufacture - 2000. ✅ Sealing jaws - Vertical: 540mm & Horizontal: 420mm. ✅ Maximum bag width - 400mm. Previously running a 592mm wide film. ✅ Forming tubes - 180mm diameter to form bag 240mm wide. ✅ Footprint of system - 2500mm long/deep x 2320mm wide x 3600mm high. NOTE: This system has recently been serviced, with new chains, belts and other consumables fitted at a cost of approximately £6,000.

Condition: excellent (used), Installed new in 2022, this conveyor was taking product from a low level multihead weigher up to a vertical form fill seal machine in a room where the height was restricted. As new condition. Csdorq Eawopfx Ab Tshf

Condition: refurbished (used), WP Riehle Linie 60 Automatic Frying System Technical specifications: - Up to 60 products produced per cycle, Csdpfouk Hllox Ab Tshf - Hermetically sealed WP Riehle lid offers greater volume at the same weight, - Extended fat lifespan thanks to pulsed heating during preheating of the fryer, - Minimal energy consumption and constant temperature thanks to direct heating in the oil, - Minimal fat absorption due to steady temperature, - Temperature controller with safety thermostat, - Comes with fermentation trolley, - Automatic mode provides full control over the quality of baked goods.

Condition: used, Year of construction: 2022, functionality: fully functional, Available for sale are 3 Minebea Intec in-line checkweigher filling stations from 2022. Unit price: €5,000 each. Conveying direction: left to right Control unit position: right side (in the direction of travel) Drive unit position: left side (in the direction of travel) Ejection system: customer-supplied ejection system Weighing conveyor axle spacing: 300 mm Weighing conveyor belt width: 250 mm Weighing conveyor transport medium: standard white belt Infeed conveyor axle spacing: 300 mm Infeed conveyor belt width: 250 mm Infeed conveyor transport medium: standard white belt Discharge conveyor axle spacing: 300 mm Discharge conveyor belt width: 250 mm Discharge conveyor transport medium: standard white belt Chodoxdxb Sspfx Ab Tsf Standard conveyor height: 450-1100 mm Transport height (450-1100 mm): 740 mm Speed range: 0.2 – 1.0 m/s Protection class (IP): IP54 (standard) Photoelectric sensors: reflection photoelectric sensor (standard) Compressed air monitoring: not required Ejection monitoring CW: not required Trend controller: 3-point controller with +/- control signal Ejection monitoring MD: not required For further questions, please do not hesitate to contact us.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, type of input current: three-phase, overall weight: 500 kg, input voltage: 400 V, input current: 4 A, Machine type LW-CM1 Performance from the Italian manufacturer Ramac. It is used for packaging a wide range of products such as nails, screws, nuts, bolts, washers, as well as metal or plastic components, which are weighed or counted by the integrated weighing/counting system. The LW-CM1 Performance weighing/counting system delivers high versatility, precision, and speed thanks to the combination of independent linear vibratory feeders for the coarse dosing phase, along with a counting module for the fine dosing phase. It is integrated with a system for feeding cartons for filling with the weighed items, as well as receiving filled cartons afterwards. By entering 'Ramac LW-CM1' in the search bar on the manufacturer’s website, you can find a video showing the exact operation of this device. The operator panel supports English, Italian, and Polish languages. Complete technical documentation from the manufacturer is included. The machine is in excellent condition, with very low usage due to a change in packaging concept and method. It comes with three carton feeders for boxes sized 115 x 65 mm / 120 x 106 mm / 110 x 120 mm. The set includes everything shown in the diagram: hopper, feeding conveyor, machine with scale, and discharge conveyor. Cedexcu Sdopfx Ab Tjhf

Condition: good (used), A good used linear weigher with Digiway controls - this machine is a single head weigher with 4 vibratory feed trays - loadcell technology and Digiway controls for fast accurate weighing and filling or granular free flowing products. Chsdsu U Ai Hepfx Ab Tjf

Condition: good (used), Consisting of: “Ishida” Multihead weigher Type CCW-M-216W-D/30-SS Heads: 16 pieces Performance: up to 2 x 40 weighing’s/min Filling weight (max. weight): 1.500 g Accuracy: Average value 0 to + 1.0 g Weighing range: 14-1000 g Max. volume: 4,500 cc (per individual weighing) Minimum division: 0.2 g Display: Touch-screen display Power: 230V, 50Hz Connected load: 1.7 kVA + Vertical flowpackaging line “Rovema” Type VPK260 - 14110 yoc 2001 Performance (mech.) cycles/min: 180 Roll width / diameter (max.) (mm): 450/ 550 (600 / 550 with pre-unrolling) Bag width (min. - max.) (mm): 60-260 Bag length (min. - max.) (mm): 120-600 Fill volume (max.) (cm³): 6000 Sealing pressure (max.) (N): 5000 (optional: 8000) Program memory: Standard: 100 (optional: 1000) Dimensions: (L x W x H) (mm): 2.200 x 1.430 x 1.620 mm Weight: 920 kg Power supply (volts): 230 / 400 Energy requirement (kVA): 8 Protection class: IP54 Compressed air connection: 6 bar Air consumption 6 bar (NI/cycle): 0.25 Machine color: Ral 9007L / gray aluminum Operating temperature (min. – max.) (°C): +5 … + 45 Storage temperature (min. – max.) (°C): -30 … +60 Air humidity (max.) (%): 15…95; no condensation + Vertical flowpackaging line “Rovema” Type VPK260 - 14111 yoc 2001 Performance (mech.) cycles/min: 180 Roll width / diameter (max.) (mm): 450/ 550 (600 / 550 with pre-unrolling) Bag width (min. - max.) (mm): 60-260 Bag length (min. - max.) (mm): 120-600 Fill volume (max.) (cm³): 6000 Sealing pressure (max.) (N): 5000 (optional: 8000) Program memory: Standard: 100 (optional: 1000) Dimensions: (L x W x H) (mm): 2.200 x 1.430 x 1.620 mm Weight: 920 kg Power supply (volts): 230 / 400 Energy requirement (kVA): 8 Protection class: IP54 Compressed air connection: 6 bar Air consumption 6 bar (NI/cycle): 0.25 Machine color: Ral 9007L / gray aluminum Operating temperature (min. – max.) (°C): +5 … + 45 Storage temperature (min. – max.) (°C): -30 … +60 Air humidity (max.) (%): 15…95; no condensation + carton box former – Packaging machine “Paal” Type ELLE 3000 S Working capacity: Max. 14 cycles / minute Infeed capacity: Max. 70 bags / minute Chjdpjukd Drefx Ab Tsf Format1 : Tray with sleeve Filling material designation: Stand-up pouch 1,5 kg Filling material dimensions: Approx. 180 x 70 x 300 mm Filling weight: 1,5 kg Grouping scheme: 1 x 5 standing Packaging type: Tray with internal, glued-in cover and cover protection Dimensions: Inlet height of filling material: 650 mm Outlet height of package: 500 mm Installation area: approx. 8000 x 6500 mm Please refer to the installation plan for the main dimensions (photo attached) 3 x 400V, 50Hz, 6kW Packaging machine: Type: Elematic 3000 LS/335

Year of construction: 2002, condition: repair required (used), ULMA, year of manufacture 2002 • Extended infeed conveyors. • Centralized lubrication. • Sanitary clean out the tray. • Gravity and motorized exit conveyors: inline, 90º, 180º, ... • Additional 1 meter sealing device. • Automatic image centring device for printed films. • Printed band attachment. • Transparent tray detection. • Sealer Cooler. • Others (Ask). A high-performance wrapping machine, specially developed for the wrapping of trays in central processing facilities (meat, poultry, fish, vegetables, fruits) and high volume supermarkets. A large range of models for customer requirements. Its strength, reliability, ease of operation, and automatic size change, make it the most automatic size change, make it the most productive and versatile machine available, possibility to wrap with several kinds of film: PVC, polyethene and polyolefines. TECHNICAL FEATURES (Depend on the model) • 1 or 2 film rolls with automatic roll selection. • Automatic recognition of the tray dimensions or manual. • Automatic or manual selection of film length and width. • Universal elevator. • Self-diagnostic capability. • Film tension control. • Forward and reserve jog capability. • 4-way film stretch with lateral pre-stretch. • Temperature control for the sealing belt. • Oversize package detector. • Mechanical torque limiter. • Guards and safety devices according to international standards. • Heavy duty construction with corrosion-resistant material. Power supply: 380 V, 12 kW Bizerba GV labeller, manufactured in 2002 Bizerba 18A scale with Bizerba AB display. Automatic labelling and weighing system for products packaged in the food area. Electric power: Voltage 220 V, Frequency 50 Hz Current 1.7 A. Dimensions of tape width 300 mm. External dimensions of the machine: (mm) 1860 long x 720 wide x 1300 high. Compressed air supply of the blower label: air pressure: 6 bar, air flow: min. 100 l / min, compressed air. without oil, filtered at 10 µm, Label dimensions: 100x100. The separation between labels: from 2 to 20 mm. Chjdpfx Ajg H Tqujb Tjf Thermal print head - resolution of 8.0 points Weighing from 1gr to 6000gr. Maximum labelling capacity 60 packages/minute. Equipment prepared for PC connection, Bizerba software allows the realization and design of labels adapted to your needs. Ability to print all types of barcodes, customer logos, etc. The equipment was reviewed, rebuilt, and guaranteed with the following maintenance: change of conveyor belts, thermal print head, and engine belts. High-quality equipment and great performance in terms of speed and reliability. The label and the scale are mounted on an output conveyor belt. Weighs at least 40 g up to a maximum of 18 kg For the Romanian companies, there is the possibility of selling in instalments. Price upon request, FCA: Oradea/Romania We sell this line refurbished Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: good (used), Year of construction: 1986, Scissor lift table, scissor lift table, scissor lift platform, scissor lifting platform, single scissor lift table, hydraulic lifting platform -Scissor lift table: with weighing unit and trolley, each without control, and weighing display -Load capacity: 2000 kg Codpow Hyfmsfx Ab Tehf -Platform: 4000 x 1420 mm -Dimensions retracted: height 430/675 mm -Extended dimensions: height 1145/1390 mm -Rolling chassis: roller spacing for rail 1100 mm -Transport dimensions: 1420/4000/H675 mm -Weight: 2600 kg

Condition: good (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: Velteko +Yamato, type of input current: three-phase, total width: 14,400 mm, total length: 22,250 mm, total height: 16,000 mm, overall weight: 1,100 kg, Packaging machine - technical data in the attachment The device consists of: Yamato ADW 514A multi-head weigher ISHIDA DACS-W-030-SB-I-N checkweigher Ceia metal detector model THS1F/400X200 with belt conveyor MO680 transporter Markem SmartDate 3i expiration date printer Chodpew S E Hrsfx Ab Tsf Promark Gamma QRC ML labeller

Year of construction: 2021, condition: ready for operation (used), Weighing heads: 10, max. weighing capacity: 6500g, individual weighing capacity: 10g-800g, scale volume: 1600ml, max. capacity: 70/min, number of programs: 100, dimensions X/Y/Z: approx. 1100mm/1100mm/1350mm, weight: approx. 330kg. The multihead weigher is sold as a complete system including accessories, peripherals and spare parts. Documentation available. Chodpfxot Rkaae Ab Tsf

Condition: excellent (used), Tamtron Loadmaster 2000 Weighing system for grab, in very good condition. All parts are present, in the original packaging. Csdpfxshvzx Eo Ab Tehf Easy installation and operation.

Condition: excellent (used), Ishida multihued weigher with elevated conveyor, gantry and PFM bagging machine. Removed from a high care cooked meat plant in the last few weeks. Lovely condition. Chodpfx Abelkc U Ee Tef

Year of construction: 2003, condition: like new (used), machine/vehicle number: 67099.031501, Used Ravas floor weighing scale Ravas floor weighing scale, model: RWB ND CE, serial number: 67099.031501, year of construction: 02-06-2003, max/min: 1500/20 kg, e=dd= 1kg, dimensions: 1300 mm x 900 mm x 50 mm. with wall display. Benefits: Stainless steel scales can be safely used in the food or chemical industry. You can weigh palletized goods more easily than on a platform scale, because you don't have to climb the load on ramps. You can transport the scale easily, because it is equipped with wheels and handles You can sanitize these scales at any time, because they are IP68 certified You can easily weigh loads up to 1,500 kg on EUR1 pallets Codpfsi E Hxxjx Ab Tohf Price: 1.250 Euro + VAT, negotiable, FCA Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: good (used), Year of construction: 2013, Cabinplant MHW 40-24 Multihead Weigher and Cabinplant Depositor/Distributor Machine functions: - Product is fed to infeed system, consisting of an elevator; - The elevator is controlled by the infeed sensor of the multihead weigher; - The multihead weighing machine discharges weighed out portions to Distributor / Depositor; - Distributor / Depositor distributes portions, orientates the product and dumps finished portions into a thermoforming machine or traysealer; This line consist of the following equipment:  - SS Stair; Csdpfxowyu Tre Ab Tshf - Infeed conveyor belt; - SS Platform; - Cabinplant MHW 40-24 Multihead Weigher; - Cabinplant Depositor / Distributor; Cabinplant MHW 40-24 Multihead Weigher Manufacturer: Cabinplant Model: MHW 40-24 Year: 2013 Capacity: 150-500 gram Weighings/min.: Up to 120 Pan Size: 4 liter Number of pans: 24 Machine Dimensions LxWxH: 2.200x2.125x2.500 mm Machine Weight: 1.100 kg. Multihead Weigher is fully checked and serviced by Cabinplant Cabinplant Depositor / Distributor Manufacturer: Cabinplant Model: Sausage Depositor Year: 2014 Capacity: 150-500 gram Weighings/min.: Up to 120 Filling Capacity: 2x5 movable pitch

Condition: good (used), counting scale, scale, parcel scale, checkweigher, checkweigher conveyor belt, conveyor belt, belt conveyor, transport belt, belt conveyor, conveyor belt -Manufacturer: Bizerba Sartorius, conveyor belt with weighing unit for checkweigher without control -Speed: 26 m/min Codpfxep Hiypj Ab Tshf -Conveyor belt width: approx. 300 mm / 2x 135 mm -Conveyor belt length: 545 mm -Drive: Voltage 24 V -Dimensions: 545/490/H215 mm -Own weight: 15 kg

Condition: new, Year of construction: 2025, filling weight (max.): 60,000 g, filling weight (min.): 5,000 g, input voltage: 380 V, PUDAS-50 , semi-automatic bagging line dedicated for fast and efficient filling of open-mouth bags. Suitable for working with plastic bags of different sizes and weights. Designed for packing wood pellets, granular products, fertilizers, grains, seeds and other products. Dosing range: 5-60kg Cedoipmxmepfx Ab Tehf Capacity: up to 5tons/hour Equiped with sealing unit Made in Lithuania, CE sertified Available on stock.

Condition: refurbished (used), Universal Parta U2001 dough divider for all types of dough, such as: wheat, wheat-mixed, rye, hard (as for pizza) and soft (baguette). Technical data: Bundle weight range: 300 - 2800 g, Constant/variable capacity: 1020 - 3260/900 - 2816 pcs/h, Max dimensions L x W x H: 1390 x 1080 x 1620 mm, Connection: 230/400 V, 3 phases 50 Hz, 2.8 kVA. Chsdpfett Apaox Ab Tsf Advantages: Suitable for almost all types of dough, Wide weight range: 300 - 2800 g, High weighing precision, Gentle dough processing, Optimal adjustment to the mixer size, Easy to clean, Various settings possible, The dough position on the take-off belt is optimal for transferring for further processing.

Condition: excellent (used), High quality line consisting of elevated conveyor, vibratory feeder, Ishida multihead weigher and gantry. Was feeding sliced cooked chicken into a Multivac thermoformer but could also be used to sit over a bagging machine. We can also offer the distribution unit which was above the Multivac. Chsdpfx Ajivqarjb Tjf

Condition: good (used), Derichs stainless steel dosing machine, dosing unit, powder dosing machine, dosing machine Entirely stainless steel including weighing computer Equipped with dosing belt and mixing belt Cedpfxswygbhe Ab Tjhf See our other advertisements

Condition: used, Year of construction: 2008, Complete weighing and clipping line, 2 lines available. Photo's in the album are from production, the equipment is now available from our stock in Emmeloord. Professionally dismantled by STC - Complete line - Affeldt AVN112CW 10EVMD - Affeldt AVN 955 T18 clipper no.2024-2008 - Platform for the weigher - funnel, collection gate - take away conveyor belt - Complete line - Affeldt AVN112CW 10EVMD - Affeldt AVN 955 T18 clipper no. 2027-2011 - Platform for the weigher - funnel, collection gate - Extra equipment - Electric cabin Chsdpfxewqb Ike Ab Tof - Bodijn feeding conveyor belt - Flat conveyor belt for boxes - A lot of spare parts (contact for more details)

Year of construction: 2024, condition: new, functionality: fully functional, Technical description: The system is designed for weighing standard cars. The loading trolley (200 or 300 litres) is pushed into the system. The free stroke and the weighing process are triggered by a button. The free stroke is carried out via motor drive. In connection with the bending rod weighing cell and the weighing terminal, the weight can be read in the display and passed on to the existing DMS or ERP system. If necessary, the recipe scale can be equipped with casters as a mobile version. The system can be equipped with all common weighing terminals. • Stainless steel base frame in hygienic design • 1 drive unit • Button • Shafts, bearings Chjdpsttv Dfsfx Ab Tof • Height-adjustable feet (alternatively mobile version) • CEE plug

Condition: new, Year of construction: 2025, Table top scaling device SVARAS-2 is dedicated for weighing bulk dry products by weight into prepared/prie-made bags. The device dispenses coffee, seeds, spices, groats, sugar, nuts, biscuits and other products of a similar fraction. SVARAS-2 is best suited for small batches, small-scale production or starting a business with a small investment. Doy-pack filling, premade pouch filling. • Capacity – 15doz./min.* Chsdpfxoic Rkxj Ab Tef • Dosing range – 10gr. – 1kg. • Accuracy – 1%* • Filling hopper capacity – 25ltr • Weighing pocket capacity – 1400ml. • Control – digital • Power – 0.2kW • Dimensions – 540x630x670mm • Housing and parts in contact with the product - stainless steel AISI304 • Easily removable weighing pocket and bag chute • Device weight – 33kg • El. supply – 220V, 50Hz, 1ph.

Condition: like new (used), Portable truck weighing scale Portable mounted on a chassis, bolted and removable. Capacity 60 MT Chedemfqkhspfx Ab Tef Length 14 M

Condition: good (used), Stainless steel conveyor, checkweigher, weighing machine, filling machine, scale Entirely stainless steel construction Spare conveyor belt available Equipped with Siemens PLC control for weighing Weighing up to approx. 10 kg See our other listings Csdjwyga Repfx Ab Tshf VMA