Used Weigh Out for sale (63,510)

Year of construction: 2001, condition: good (used), 14-head Ishida weigher with smooth surface. Well maintained, it was used by Mars Inc before. Codpfx Abjr H H Rpj Tsaa

Year of construction: 2020, condition: good (used), functionality: fully functional, machine/vehicle number: 1438016140010, Checkweigher Mettler Toledo / Garvens Cajdpfoxnmy Rjx Ab Toa Model C3570 Year built: 2020 Weighing capacity: 360–1400g Calibration still valid Software included

Year of construction: 2018, condition: good (used), Bagging line consisting of Incline Conveyor with Flights and product speed control Weigher 4 Dispensing Buckets Caodeinbhtjpfx Ab Tja PLC Controller for complete system In good working order

Condition: repair required (used), Dough divider Parta SN, year of manufacture 2011. The machine was replaced with a new one because it does not divide the dough evenly. Codpfx Asxmvk Aeb Toaa

Condition: excellent (used), GARVENS S2 Checkweigher up to 300 g This Checkweigher is designed to check-weigh packages, such as cartons filled with product, against pre-set parameters. Capacity: approx 100 cartons/min Weighing range: 5 - 300 g Precision: d 0,1 g / e 0,1 g Cajdpfxoxl Szbe Ab Tea Infeed conveyor: 420 x 150 mm Discharge conveyor: 420 x 150 mm Manufacturer: Garvens Year of construction: 2006 Floor Space: 130 x 70 x 150 cm

Condition: refurbished (used), WP Riehle Linie 60 Automatic Frying System Cajdpjuk Hllsfx Ab Tja Technical specifications: - Up to 60 products produced per cycle, - Hermetically sealed WP Riehle lid offers greater volume at the same weight, - Extended fat lifespan thanks to pulsed heating during preheating of the fryer, - Minimal energy consumption and constant temperature thanks to direct heating in the oil, - Minimal fat absorption due to steady temperature, - Temperature controller with safety thermostat, - Comes with fermentation trolley, - Automatic mode provides full control over the quality of baked goods.

Condition: good (used), Daumar PA25 rotatary weigher. 15 rotating buckets with 1 weigh cell. Dimensions approx. 1.7 m x 1.5 m. with stand Cedpjtq Iqcofx Ab Toaa

Year of construction: 2025, condition: new, A ZS 6000 / ZS 6000 i Automatic Weighning and Packaging Machine is suitable for various types of vegetables such as potatoes, onions, carrots, cucumbers, beets, etc. It is used for automatic electronic weighing, filling of mesh bags, as well as sewing or sealing the bags. The harvested product is dosed from the hopper into the two electronic scales via a feeding conveyor equipped with checker plate. The conveyor belt then transports the harvested product to the desired location. The packaging unit ranges from 1 to 25 kg. Specifications Capacity: 6 t/h Power range: 6 kW, 400V Packaging range: 1–25 kg (manual 50 kg) Packaging type: Mesh bags Sewing machine: 1-needle sewing machine New Long NP-07 Control: 7″ touchscreen Label feed Conveyor belt with vibration motor Dosing system with vibration Harvested products: Potatoes, onions, cucumbers, carrots Available in two versions: powder-coated or stainless steel finish. Caedpfev Uw Hxox Ab Tsa Dimensions: Length: 1940 mm Width: 4300 mm Height: 2230 mm Weight: ~ 950 kg

Year of construction: 2009, condition: not inspected (used), Bizerba CWE Checkweigher Caedoh Aphfepfx Ab Toa Min 50g Max 1500/3000g e=d= 0.5/1g

Condition: ready for operation (used), Key Specifications – MBP 14‑Head C2T Series: MBP C2 (stainless steel, central-feed, food-grade) Number of Weigh Heads: 14 Weigh Height/Capacity: Up to 5,000 g per weighment Operating Speed: Up to ~180 weighments per minute Cjdpfewqq Nksx Ab Tsaa Bucket Type: Smooth stainless-steel buckets – ideal for reducing product stickiness Drive & Controls: Stainless-steel construction for all product contact parts Step-motor‑controlled bucket gates ensure precise portion release Windows‑based multimedia control system with remote access/diagnostics Electrical Requirements: 230 V, 1‑phase, 60 Hz, 10 A

Condition: good (used), Rear weight, forklift weight -Manufacturer: Clark, rear weight from forklift type C500-Y80 Cjdpjwliuuofx Ab Tjaa -Recording/Dimensions: see photos -Dimensions: 1275/570/H940 mm -Weight: 1405 kg

Year of construction: 2020, condition: ready for operation (used), A checkweigher with integrated metal detector Mettler Toledo is available. 1) Automatic checkweigher Mettler Toledo AdvancedLine CM3571, year of manufacture: 2020, weighing capacity: 1000g-6000g, min. weighing product: 80g, scale interval: 0.5/1g, tolerance: +/-1000g, belt speed: 35m/min, throughput: 60/min, pneumatic pressure: 400-1000kPa, accuracy class: X III (1). 2) Metal detector Mettler Toledo Profile LS Combi, year of manufacture: 2020, opening width: 350mm, opening height: 150mm, operating sequences: 100/300/800. Including infeed and outfeed conveyors, collection container, covers, FreeWeight Nt, software etc. Documentation available. An on-site inspection is possible. Cjdpfx Aoxfbc Isb Tsaa

Condition: ready for operation (used), water proof, 3 liter buckets, made in 1999. Complete and ready to be used. Comes with six months warranty. Caodpfxju Hx Uxe Ab Tja

Year of construction: 2005, condition: used, machine/vehicle number: 840856, Lg.No. 19501 Cedpfxjvxq Rfe Ab Tjaa Technical data: - mobile, drawbar-controlled tandem steering wheels - locking device - load capacity at 925 mm projection 550 kg - load capacity at 1210 mm projection 450 kg - load capacity at 1500 mm projection 350 kg - load capacity at 1800 mm projection 250 kg - load capacity at 1800 mm projection 150 kg - max. hook height at approx. 750 projection 1950 mm - max. hook height at approx. 1650 projection 2500 mm - space requirement approx. W 880 x H 1250 x D 1800 mm - weight 600 kg

Year of construction: 1994, condition: good (used), machine/vehicle number: ST 151, Load capacity and weighing range: 2 t Fork length: 1100 mm Fork width: 170 mm Load centre distance: 600 mm Lifting range: 78 - 198 mm Space requirement: 1500 x 560 x 900 mm Weight: 64 kg Casdpfx Ajd Awnteb Tea

Condition: used, Year of construction: 2022, functionality: fully functional, Available for sale are 3 Minebea Intec in-line checkweigher filling stations from 2022. Cajdpfx Aexdxb Seb Tea Unit price: €5,000 each. Conveying direction: left to right Control unit position: right side (in the direction of travel) Drive unit position: left side (in the direction of travel) Ejection system: customer-supplied ejection system Weighing conveyor axle spacing: 300 mm Weighing conveyor belt width: 250 mm Weighing conveyor transport medium: standard white belt Infeed conveyor axle spacing: 300 mm Infeed conveyor belt width: 250 mm Infeed conveyor transport medium: standard white belt Discharge conveyor axle spacing: 300 mm Discharge conveyor belt width: 250 mm Discharge conveyor transport medium: standard white belt Standard conveyor height: 450-1100 mm Transport height (450-1100 mm): 740 mm Speed range: 0.2 – 1.0 m/s Protection class (IP): IP54 (standard) Photoelectric sensors: reflection photoelectric sensor (standard) Compressed air monitoring: not required Ejection monitoring CW: not required Trend controller: 3-point controller with +/- control signal Ejection monitoring MD: not required For further questions, please do not hesitate to contact us.

Condition: good (used), Rear weight, forklift weight -Manufacturer: Clark, tail weight -Recording/Dimensions: see photos -Transport dimensions: 1110/1000/H650 mm -Weight: 1900 kg Cjdpfx Abew U Ttlo Teaa

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, type of input current: three-phase, overall weight: 500 kg, input voltage: 400 V, input current: 4 A, Machine type LW-CM1 Performance from the Italian manufacturer Ramac. It is used for packaging a wide range of products such as nails, screws, nuts, bolts, washers, as well as metal or plastic components, which are weighed or counted by the integrated weighing/counting system. The LW-CM1 Performance weighing/counting system delivers high versatility, precision, and speed thanks to the combination of independent linear vibratory feeders for the coarse dosing phase, along with a counting module for the fine dosing phase. It is integrated with a system for feeding cartons for filling with the weighed items, as well as receiving filled cartons afterwards. By entering 'Ramac LW-CM1' in the search bar on the manufacturer’s website, you can find a video showing the exact operation of this device. The operator panel supports English, Italian, and Polish languages. Complete technical documentation from the manufacturer is included. The machine is in excellent condition, with very low usage due to a change in packaging concept and method. It comes with three carton feeders for boxes sized 115 x 65 mm / 120 x 106 mm / 110 x 120 mm. The set includes everything shown in the diagram: hopper, feeding conveyor, machine with scale, and discharge conveyor. Codpfx Aexcu Sdsb Tsaa

Condition: ready for operation (used), Marel checkweigher, model: 9500, serial number: 95200W, 230 V, 50 Hz, maximum capacity: 27.5 kg, minimum capacity: 2 kg, plastic belt, belt width: 490 mm, total dimensions: 2200 mm x 1100 mm x 1820 mm. Cedpfsxakyfex Ab Teaa

Condition: excellent (used), FRITSCH WEIGHER Weight range 350 gr.-2400 gr. Gentle for rye, multigrain doughs weighing on rollers Casdpfx Abjghwiyj Tea Connection 16 Ah

Condition: used, Year of construction: 1969, functionality: fully functional, 1A625 - lightweight screw-cutting lathe with increased processing diameter Ø 500 Casdpjwcbuzjfx Ab Toa

Condition: good (used), Ceia THS Metal detector checkweigher Stainless metal detector checkweigher, aperture 340mm x 100mm, checkweigher platform 420mm x 290mm, with blow off reject into reject bins, with printer, mobile, 1Ph Caedpjtt D S Uofx Ab Tsa

Condition: good (used), Consisting of: “Ishida” Multihead weigher Type CCW-M-216W-D/30-SS Heads: 16 pieces Performance: up to 2 x 40 weighing’s/min Filling weight (max. weight): 1.500 g Accuracy: Average value 0 to + 1.0 g Weighing range: 14-1000 g Max. volume: 4,500 cc (per individual weighing) Minimum division: 0.2 g Display: Touch-screen display Power: 230V, 50Hz Connected load: 1.7 kVA + Vertical flowpackaging line “Rovema” Type VPK260 - 14110 yoc 2001 Performance (mech.) cycles/min: 180 Roll width / diameter (max.) (mm): 450/ 550 (600 / 550 with pre-unrolling) Bag width (min. - max.) (mm): 60-260 Bag length (min. - max.) (mm): 120-600 Fill volume (max.) (cm³): 6000 Sealing pressure (max.) (N): 5000 (optional: 8000) Program memory: Standard: 100 (optional: 1000) Dimensions: (L x W x H) (mm): 2.200 x 1.430 x 1.620 mm Weight: 920 kg Power supply (volts): 230 / 400 Energy requirement (kVA): 8 Protection class: IP54 Compressed air connection: 6 bar Air consumption 6 bar (NI/cycle): 0.25 Machine color: Ral 9007L / gray aluminum Operating temperature (min. – max.) (°C): +5 … + 45 Storage temperature (min. – max.) (°C): -30 … +60 Air humidity (max.) (%): 15…95; no condensation + Vertical flowpackaging line “Rovema” Type VPK260 - 14111 yoc 2001 Performance (mech.) cycles/min: 180 Roll width / diameter (max.) (mm): 450/ 550 (600 / 550 with pre-unrolling) Bag width (min. - max.) (mm): 60-260 Bag length (min. - max.) (mm): 120-600 Fill volume (max.) (cm³): 6000 Sealing pressure (max.) (N): 5000 (optional: 8000) Program memory: Standard: 100 (optional: 1000) Dimensions: (L x W x H) (mm): 2.200 x 1.430 x 1.620 mm Weight: 920 kg Power supply (volts): 230 / 400 Energy requirement (kVA): 8 Protection class: IP54 Compressed air connection: 6 bar Air consumption 6 bar (NI/cycle): 0.25 Machine color: Ral 9007L / gray aluminum Operating temperature (min. – max.) (°C): +5 … + 45 Storage temperature (min. – max.) (°C): -30 … +60 Air humidity (max.) (%): 15…95; no condensation + carton box former – Packaging machine “Paal” Type ELLE 3000 S Working capacity: Max. 14 cycles / minute Casdpeukd Drefx Ab Tja Infeed capacity: Max. 70 bags / minute Format1 : Tray with sleeve Filling material designation: Stand-up pouch 1,5 kg Filling material dimensions: Approx. 180 x 70 x 300 mm Filling weight: 1,5 kg Grouping scheme: 1 x 5 standing Packaging type: Tray with internal, glued-in cover and cover protection Dimensions: Inlet height of filling material: 650 mm Outlet height of package: 500 mm Installation area: approx. 8000 x 6500 mm Please refer to the installation plan for the main dimensions (photo attached) 3 x 400V, 50Hz, 6kW Packaging machine: Type: Elematic 3000 LS/335

Condition: refurbished (used), year of construction: 2010, plastic belts, belt widths: 265 mm and 300 mm, total dimensions: 1600 mm x 1050 mm x 1700 mm. Weighing range 1g-2500g Cjdpfx Aew Trh Sob Teaa

Condition: excellent (used), year of construction: 2019, 208-230 V, 50/60 Hz, 2 A, plastic belt, belt width: 605 mm, total dimensions: 1180 mm x 1090 mm x 1550 mm. Casdpfx Aow Trh Ejb Tja