Used Water Pumps for sale (13,833)

Year of construction: 2006, condition: ready for operation (used), A Flow Europe CNC waterjet cutting system is available. Working dimensions X/Y: 3600mm/2000mm, continuous operating pressure: 3800bar, pump type: Flow HyPlex 50, operating hours: 4342, major pump maintenance at: 4102h, control system: Flow Master-PC, module version Path/Cut/FlowNest: 6.0. Including clamping and fixturing device, Flow setup and positioning aids with laser pointer, light barriers, sand silo, Flow mixing unit, water softening system, new pump maintenance kit, various spare parts, and all piping and cables. The collision sensor has a defect. Documentation vorhanden. An on-site inspection is possible. Kdedjzka Imopfx Abnor

Year of construction: 1998, operating hours: 88 h, condition: excellent (used), Selling water pump, - BBA B156 TW GMC. - 1998 year of construction. - 11KW/ 1460 rpm motor. Kdjdpfx Abovgbayjnsr - Worked 88 mth. - Capacity 180 m3/h. - Perfect condition/ like new.

Condition: excellent (used), Leybold Two-Stage Rotary Vane Vacuum Pump Here, we offer a Leybold two-stage rotary vane vacuum pump. The TRIVAC B series are oil-sealed vacuum pumps based on the rotary vane principle. The oil injected into the pumping chamber serves for sealing, lubrication, and cooling. The pump housing is composed of individual parts without sealing elements. These are pinned together to ensure easy disassembly and reassembly. Ultimate pressure: 2 x 10⁻³ mbar Motor: 3-phase, 230/400 V, 50/60 Hz Kdsdpfx Ajzgbvqobnsr Pumping speed (50 Hz): 40 m³/h Pumping speed (60 Hz): 48 m³/h Environmentally friendly: Quiet Vibration-free operation, energy-saving Energy-saving: Low power consumption Low heat dissipation Modern vacuum technology: High pumping speed down to the ultimate pressure Low ultimate pressure, even with gas ballast High water vapor tolerance Continuous operation even at 1000 mbar Built-in oil pump, forced-lubricated plain bearings Minimal air intake High leak tightness (4He-capable) Technical data: Product: TRIVAC D 40 B Suction side connection flange: DN 40 ISO-KF Discharge side connection flange: DN 40 ISO-KF Nominal pumping speed at 50 Hz: 46.0 m³/h Nominal pumping speed at 60 Hz: 55.0 m³/h Pumping speed at 50 Hz: 40.0 m³/h Pumping speed at 60 Hz: 48.0 m³/h Ultimate partial pressure without gas ballast: 1.0 x 10⁻⁴ mbar Ultimate total pressure without gas ballast: < 2.0 x 10⁻³ mbar Ultimate total pressure with gas ballast: < 5.0 x 10⁻³ mbar Water vapor tolerance at 50 Hz: 40.0 mbar Water vapor tolerance at 60 Hz: 40.0 mbar Water vapor capacity at 50 Hz: 1,184 g/h Water vapor capacity at 60 Hz: 1,184 g/h Operating fluid volume min.: 1.7 l max.: 2.6 l Sound level according to DIN 45 635 without gas ballast: 57 db(A) with gas ballast: 59 db(A) Power connection: 3-phase, 200 / 200-240 / 380-400 V ±10%, 50 Hz 3-phase, 200-240 / 380-480 V ±10%, 60 Hz Motor power: 2.2 kW Motor speed at 50 Hz: 1,430 min⁻¹ Motor speed at 60 Hz: 1,735 min⁻¹ Motor protection type: IP 55 Permissible ambient temperature: +12 to +40°C Weight: 73.0 kg Type: Trivac D 40 B Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: like new (used), Year of construction: 2021, operating hours: 480 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 260 mm, type of input current: three-phase, sheet thickness aluminum (max.): 260 mm, operating pressure: 4,150 bar, year of last overhaul: 2025, power: 22 kW (29.91 HP), Flow Mach 200 waterjet cutting system for sale A very well-maintained Flow Mach 200 waterjet cutting system from 2021 is available for sale, with extremely low operating hours of only approximately 500 hours. The machine was used exclusively for single-piece and small-batch production, not in multi-shift operation, and was regularly serviced by Flow. Technical data: – Working area approx. 4,000 × 2,000 mm – Z-axis approx. 200 mm – Flow HyPlex Prime 30 high-pressure pump – Max. pressure 4,150 bar – PASER abrasive cutting system incl. CF900 – Pivot+ 3D cutting head with active angle compensation up to 60° – UltraPierce piercing assist – Laser edge finder – ecoFlow abrasive hand deburring system – EKOWA cutting water treatment system – Steel catcher tank – Stainless steel slats (blades) Software package: – FlowCut – FlowPath – FlowXpert – FlowNest Plus office license Supported formats: DXF, DWG, STEP, IGES, STL and others Kdjdsy Urzijpfx Abner Special features: – Very low wear due to low operating hours – Complete documentation available – Operator training provided – Well-maintained overall condition – Immediately ready for operation Asking price: €115,000 net Inspection possible by appointment. More pictures and information available upon request.

Condition: used, functionality: fully functional, mileage: 34,000 km, power: 161.81 kW (220.00 HP), axle configuration: 4x4, fuel: diesel, Year of construction: 1995, Equipment: additional headlights, all wheel drive, trailer coupling, Are you looking for a reliable and affordable emergency vehicle for your fire department? Then you have come to the right place! From our immediately available stock of used vehicles, we offer: Water Tank Firefighting Vehicle TLF 16/25 ALL-WHEEL DRIVE 4x4 Magirus on IVECO 135E22 The TLF 16/25 is the proven combination of the advantages of crew fire engines and water tank firefighting vehicles. With a squad crew and ample space for firefighting and rescue equipment, the vehicle is prepared for most operational scenarios. General Data: • Year of manufacture: 1995 • Mileage: approx. 34,000 km Chassis: • IVECO 135E22 4x4 with 220 HP (159 kW) • Diesel engine with manual transmission Kedpsxk T Efofx Abnedr Cab: • Standard, spacious crew cab (1+5) in RAL 3000 (fire red) • Mounts for 2 self-contained breathing apparatus in the crew compartment Bodywork: • Manufacturer Magirus Eurofire • TLF 16/25 body according to DIN standards • Three large lateral equipment compartments each side • Extendable steps for the front side equipment compartments • Brackets for standard equipment load • Mounts for 2 additional breathing apparatus • Roof compartment Fire Pump / Water Tank: • Magirus FPN 1600-8 centrifugal fire pump • Capacity 1,600 l/min at 8 bar • Water tank 2,600 l Firefighting Equipment: • Fixed rapid action hose reel, 50 m, in upper compartment G6 Safety and Lighting: • 2 rotating beacons at the front and 1 at the rear • Pneumatic special signal system (Martin horn) • Rear-view camera • Hygiene board available on request We are happy to provide you with a specific offer and can present the vehicle to you in detail at our premises in Berlin. All information is provided to the best of our knowledge and belief, without guarantee of completeness or accuracy. This advertisement does not constitute an offer, but is for information purposes only. Subject to prior sale!

Condition: good (used), Year of construction: 2020, functionality: fully functional, type of input current: three-phase, overall weight: 400 kg, input voltage: 400 V, total width: 855 mm, total length: 1,360 mm, total height: 2,066 mm, year of last overhaul: 2025, We are offering for sale an air-cooled compact chiller in good condition. The unit features an internal semi-open tank and a chilled water pump. The machine is fully operational. Last maintenance was in 2025.We are also happy to offer installation, commissioning, and suitable after-sales service. Kjdjxc Iwyopfx Abnsdr

Condition: used, Year of construction: 2013, operating hours: 3,000 h, functionality: unexamined, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, For sale as a complete package: Waterjet Cutting Machine STM 3015, year 2013, with computer from 2018 and 3 network dongles for IGEMS software. Working area: 3000x1500mm High-Pressure Pump Ecotron 40.37, year 2013 Kdodpoyq Rdyjfx Abnor Water Softening System, year 2018 – like new Abrasive Backwash System, year 2013 Column Slewing Crane Abus 2t, year 2018 – like new Vacuum Lifting Device Devo-Tech, load capacity 1800kg – like new Various accessories and sandbags available The system was purchased at the end of 2018 and commissioned at the beginning of 2019. The waterjet system and pump had been completely overhauled by the supplier at that time. Unfortunately, the cutting system was hardly used. It only ran for a few hours per year and has not been in operation since about July 2025. The high-pressure pump is defective (leaks water and is not sealed). Both high-pressure cylinders have been replaced in recent years. Last serviced in 2025. According to the service technician, repair of the pump would cost approx. CHF 5,000 to 6,000. The crane and vacuum lifting device can also be purchased separately. Please send your offer with price expectations. In 2019, the new price for the crane and vacuum lifter was around CHF 37,000 incl. VAT. The machine can be inspected during business hours. It is still connected, but has been drained and cleaned. Please arrange appointments or submit offers via email, not by phone.

Condition: used, Year of construction: 2015, Temperature controller Pipe trace heating Manual shut-off valve Thermometer Strainer Solenoid valve for make-up water Solenoid drain valve (normally open when de-energized) Level monitoring Tank Pump Pressure gauge Ball valve Kedpfx Abozl S Tdenjdr Check valve Pressure reducing valve Temperature sensor Expansion tank Air vent Backflow preventer Biocide dosing system Corrosion inhibitor dosing system Side-stream filter Twin water softener system GWK Hermeticool

Condition: used, Year of construction: 2000, functionality: fully functional, HOMAG Optimat BOF 31/40/G Kodpfezr Nurex Abnsdr Manufacturer: HOMAG Group (Germany) Machine type: CNC machining center (stationary machine) Year of manufacture: 2000 Design: Gantry design for maximum stability Working ranges (X, Y, Z axes) • X-axis (length): 4,000 mm • Y-axis (width): 1,200 mm • Z-axis (travel): approx. 400 mm (workpiece passage approx. 60–100 mm depending on clamping) Equipment and units • Main spindle: Liquid-cooled electrospindle (power 11 kW) • Tool clamping: HSK F63 • Tool changer: Disc tool changer with 12 positions, located on the gantry for quick tool changes. Clamping system • Table type: Full table • Vacuum pump: 2 pcs - Siemens Elmo water-type 2BL1 with a capacity of up to 60 m³/h Control and Software • Control system: HOMAG PC85 (based on Windows) • Software: woodWOP (one of the most widespread and intuitive systems for CNC machining)

Year of construction: 2025, condition: used, functionality: fully functional, This is a glasswashing machine from the manufacturer Hobart, model GXCROI-10C, manufactured in 2025. This compact professional dishwasher is equipped with an integrated osmosis system and a base unit for empty racks or detergent, as well as suction lances for monitoring the fill level. The glasswashing machine has been inspected in our in-house workshop and is fully functional and in near-new condition. The list price of the machine in this configuration is €13,285.16 (gross). You will receive an invoice with VAT shown. Our used equipment service for you: 6 months warranty on all electrical parts, limited to the replacement of defective parts, without installation and removal costs. High-quality brand-name equipment at fair prices. Kdjdjy Uvuaopfx Abner Professional refurbishment/inspection & expert cleaning. Checked & fully functional – or your money back. Flexible shipping or self-collection options. Competent advice – before and after the purchase. Provision of operating instructions, connection diagrams & spare parts. Testing according to DGUV V3 Technical data: External dimensions WxDxH: 600 x 600 x 1260 mm Electrical connection: 400V / 50 Hz, 6.8 kW Year of manufacture: 2025 60/90/120 sec. and special programs Water consumption: 2L/rack Tank capacity: 60 liters Rack size: 500 x 500 mm Loading height: 305 mm Condition: Used, inspected and fully functional Base model: Front-loading machine Theoretical capacity up to 60 racks/h, 2,160 glasses/h 7 automatic programs: short, standard, cold rinse, hygiene, basic cleaning, intensive program, E-Save Automatic self-cleaning program Wash pump with soft start Integrated WLAN module Completely ready for connection: inlet and outlet hoses, connection cable (400 V connection), liquid detergent dosing pump, rinse aid dosing pump, rinse pump, drain pump, backflow preventer Multi-phasing: Machine can be switched from 400 V to 230 V on-site Shock-absorbing door with self-closing mechanism Tank, sump, cladding made of CrNi steel 1.4301 Universal glass rack 00-378814-000: 500 x 530 mm With base unit: 435 mm high, with removable door, CrNi steel 18/9, space for 2 empty racks or detergent Customer benefits: Compact design, installation height of only 705 mm / with integrated osmosis only 820 mm Self-cleaning washing system VISOTRONIC-TOUCH control SmartConnect app SENSO-ACTIVE resource management CLIP-IN washing and rinsing system Intelligent data storage USB interface GENIUS-X2 fine filter system Cold rinse Intensive program Screen insert control Optional fill level indicator Hygiene program in combination with the Hygiene Tab INTENSIVE Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors. Do you have any questions, would you like to request advice or would you like to see something on-site? You can reach us by telephone during our opening hours: Monday to Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is exclusively subject to our general terms and conditions (GTC).

Condition: excellent (used), Pressure centrifugal pump Vertical centrifugal pump Grundfos CR 90-3 A-F-A-E-EUBE more piece Vertical, multistage centrifugal pump with suction and discharge ports on the same level. The pump head and base are in cast iron - all other wetted parts are in stainless steel (EN 1.4301) Rated flow 90 m³/h Rated head 65.5 m Max pressure at stated temp 16 bar / 120 °C Type of connection DIN Size of inlet connection DN 100 Pumped liquid Water Liquid temperature range 0 .. 120 °C Selected liquid temperature 20 °C Density 998.2 kg/m³ Electrical data Motor type SIEMENS Rated power - P2 22 kW 2940 rpm Kdodpfxohy Nx Eo Abnor Mains frequency 50 Hz Rated voltage 3 x 380-415D/660-690Y V Rated current 41,5-39,5/24,0-23,5 A Cos phi - power factor 0.86 Rated speed 2945 rpm Number of poles 2 Enclosure class (IEC 34-5) IP55

Condition: used, For sale: Kdjdpfezbrp Sjx Abner Complete washing and flotation system with water post-treatment. This system is used to remove and dewater sludge (mud, fine sand, clay, and other solid materials) from wastewater. Manufacturer = Tecnicas Hidraulicas S.A. (TH), a Spanish company specializing in wastewater treatment and sludge dewatering systems. Consisting of: - Washing drum: 2.4 m diameter; Length 4.5 m + 1.7 m - Construction material: Creusabro 4800 steel, 12 mm thick (Similar to Hardox) - Separation and flotation drum with 2 dewatering screens, collection tanks, and associated Warman pumps = top quality. - Lamella thickener tank, 4.5 meters diameter, with pump - EPS mixer - Archimedes screw - Water tank / reservoir, 10,000 liters - All necessary and associated Warman pumps and conveyor belts. Applications: Mining industry Dredging operations / dredged sludge Concrete industry Glass industry

Condition: as good as new (ex-display), Pump, Industrial Circulation Pump, WILO Close-Coupled Centrifugal Pump, 45 m³/h, 12.5 m, Used Machine Manufacturer Wilo-Werk Model IPH 80/200-3/4 Article Number 0912298 / 8610-1 Technical Specifications Maximum Liquid Temperature (t): 120°C / 140°C Maximum Operating Pressure (p): 16 / 13 bar Flow Rate (Q): 45 m³/h Head (H): 12.5 m Rated Speed (n): 1450 RPM Operating Voltage: 380 V Current Consumption: 7 A Actual Speed: 1410 RPM Overall Dimensions Width: 500 mm Ksdpfozqbtqjx Abnsdr Depth: 350 mm Height: 560 mm Description Industrial WILO close-coupled centrifugal circulation pump designed for the circulation of hot water and other non-aggressive liquids in heating, cooling, and industrial process systems. The pump provides a flow rate of 45 m³/h and a head of 12.5 m, making it suitable for HVAC systems, district heating networks, industrial cooling circuits, and process water applications. Designed for continuous-duty operation, the pump can handle liquid temperatures of up to 140°C and operating pressures of up to 16 bar, ensuring reliable and efficient performance in demanding industrial environments.

Condition: used, mileage: 10 km, first registration: 02/2025, axle configuration: 3 axles, emission class: euro6, Truck-mounted concrete pump Zoomlion 38X-5Z, for sale / for rent * Distribution boom: * Reach height 38m * Folding type/kink type 5-part Z-fold * Reach 32.36m gross * Reach depth 25.20m * Unfolding height 7.5m * Delivery lines type DN 125, max 85 bar * Length of end hose 3m * Swivel range 365 degrees * Pump unit: * Max. output Max. 170 m3/h * Pressure on the ground side 85 bar * Delivery cylinder 260mm * Stroke 2100mm * Strokes per minute 25 * Support system: * Full support front and rear 6.19m and 7.7m OSS 4.18m and 4.96 FS 2.17m - 6.19m, 2.27 - 7.7m * Total length 11.02m * Height 3.95m * Configurations: * Diesel tank in support 600 liters * Water tank 550 liters * Water pump 70/15 liters/bar * High pressure pump 15/200 liters/bar * Delivery cylinder - hard chrome-plated * Feed hopper with vibrator and covered by aluminum cover Kjdpfx Asyuymxebnodr * Wear plate hard metal * S pipe wear-resistant * Pipe double-walled * End hose squeezer * Storage option for hoses or pipes aluminum trays on both sides * Support aids 8X squared timbers with storage option * Radio remote controls 2X consisting of 1X HBC and 1X Zoomlion * Safety: * Fully flexible support monitoring * Warning light in the danger area * 360 degree camera system * Emergency pump control * Mast package controlled with vibration damping (EBC) * Up and Folding with a joystick * various pump system controls * Chassis Daimler Benz Type 26/43 * Axle ratio 6x4 * Wheelbase mm 4800 * Emissions class Euro 6

Condition: refurbished (used), Year of construction: 1988, Ingramatic RP1V: M6x75/40 mm. 230-600 ppm. Also available with a tabletting machine. Completely overhauled to like-new condition. Kdsdpfx Aeh Riuuobnsr Machine can be viewed in Calolziocorte (LC). OVERHAUL ACCORDING TO CE STANDARDS. The overhaul includes: - DISASSEMBLY AND CLEANING OF EVERY COMPONENT - REPLACEMENT OF ALL BEARINGS - GRINDING OF GUIDES OR REPLACEMENT IF NOT SUITABLE - OVERHAUL OF FEEDING UNIT - OVERHAUL OF SLIDE UNIT WITH REPLACEMENT OF BRONZE BUSHINGS - NEW LUBRICATION SYSTEM WITH COMPLETE HYDRAULIC UNIT, INCLUDING PUMP, OIL LEVEL INDICATOR, PRESSURE SWITCH, AND DISTRIBUTORS - NEW WATER PUMP FOR FEEDING TRAY - NEW VIBRATORY FEEDER, Ø670, COMPLETE WITH VIBRATION CONTROL PANEL AND PHOTOELECTRIC SENSOR FOR OVERFILL PROTECTION - OVERHAUL OF ROLLER DISCHARGE UNIT - PROTECTIVE GUARD COMPLETE WITH LAMP AND MICROPHONE - INSTALLATION OF SOLENOID VALVE WITH NEW AIR SYSTEM FOR VIBRATORY FEEDER AND GUIDES - NEW ELECTRICAL SYSTEM ACCORDING TO CE STANDARDS, COMPLETE WITH INVERTER - NEW MOTOR - REPLACEMENT OF BELTS - RAL PAINTING IN THE COLOR YOU SPECIFY

Condition: as good as new (ex-display), Year of construction: 2011, operating hours: 2,500 h, functionality: fully functional, machine/vehicle number: ----, working range: 4,500 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 250 mm, workpiece weight (max.): 8,000 kg, type of input current: AC, input voltage: 400 V, sheet thickness aluminum (max.): 150 mm, table length: 4,500 mm, operating speed: 20,000 mm/s, table width: 2,400 mm, tank capacity: 8,000 l, pressure: 4,150 bar, positioning speed: 40 m/min, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 15 m/min, table height: 1,100 mm, operating pressure: 4,150 bar, warranty duration: 3 months, input current: 60 A, cutting speed: 20,000 mm/min, travel speed (max.): 40,000 mm/min, year of last overhaul: 2024, overall weight: 6,000 kg, power: 44.13 kW (60.00 HP), Water cutting machine from showroom. 2 head water cutting machine CMS Tecnocut Easyline 1 2D head with 250 mm Z-axis range 1 head 3D with 150 mm Z-axis range, A-axis range +/- 274 degrees, B-axis +/- 62 degrees, full 3D control , no 2.5D like many other machines Fully interpolated heads, so controlled via CNC and not manually coupled Cutting range: X-As: 2,000 mm Y-As: 4,000 mm Kedpfx Asq U Irmjbnsdr Z-As: 250 / 150 mm A-As: +/- 274 degrees B-As: +/- 62 degrees Options: - 5-As cutting head - extra 2D cutting head - Chain discharge for abrasive - Anti-collision sensors on both heads More details / official quotation on request 60HP Jetpower EVO pump with as much as 5 L/min capacity ( liters bring cutting speed ) max pressure 4150 bar. We are since 13 years official CMS dealer Perfectly maintained and technical condition 100% Machine will be delivered in new condition, pictures are during last use We give 6 months warranty on this machine Rent / Lease / all in lease is also negotiable

Year of construction: 1998, condition: used, OCIM Filter with pump, pump engine Zambelli, year of manufacture 1998 OCIM Filters-Presses are particularly suitable for filtering fluid and dense food products such as: oil, wine, liqueurs, water, syrups, medicines, vinegar, etc. They are built with first-rate materials mainly in stainless steel, in perfect symphony with sanitary laws. Each machine is complete with a self-priming electric pump of the type most suitable for the characteristics of the product to be filtered and is complete with all related accessories. Upon request, they can be equipped with both mechanical and electronic speed variators. The unbreakable plates are made of non-toxic plastic material bonded with glass fibre and their shape is designed to make the most of the filtering surface. Both cartons and stainless steel cloths can be used for filtration. Furthermore, OCIM offers its fifty years of experience in the field of filtration and puts appropriate materials and solutions at the service of its customers. Price Euro 1.200 Euro + VAT, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Ksdpfx Abeg Uf Dfenedr Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 2015, condition: like new (used), machine/vehicle number: UTZ8922, Used SERMAC model Star SCM80C Trailer Mounted Concrete Pump (2015) The production year 2015. Maximum output of 80m³/hour fitted with an FPT-Iveco 6-cylinder water-cooled 175hp diesel engine. Complete with 7" diameter output. Mounted on single axle fast towing a trailer for site use only, 5 manually operated stabiliser legs, towing bracket with the eye, separate water tank with a high-pressure water system for washing down, auto greasing system and emergency toolkit. The pump is in good condition. Sold without transfer/working piping. Price Euro 36.000 Euro + VAT, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana Ksdpjg Igk Aefx Abnedr

Condition: excellent (used), For sale: Professional fire-fighting pump METZ TS 8/8 manufactured by METZ Feuerwehrgeräte GmbH Karlsruhe. The equipment is in very good visual and technical condition and comes from a fire brigade unit. The pump is powered by a Volkswagen type 122 engine with 25 kW output, renowned for its durability and ease of maintenance. A significant advantage is its low operating hours—approximately 66 hours, which is exceptionally low for equipment of this type. Technical specifications • Manufacturer: METZ Feuerwehrgeräte GmbH • Model: TS 8/8 • Standard: DIN 14410 • Year of manufacture: 1989 • Engine: Volkswagen type 122 • Engine power: 25 kW • Displacement: 1192 cm³ • Pump capacity: 800 l/min at 8 bar • Operating weight: approx. 190 kg • Hour meter: approx. 66 hours Equipment • Pressure and vacuum gauge • Hour meter • Work lights • Firefighting quick couplings • Transport frame • Choke and throttle control Application • Volunteer and professional fire brigades • Water transfer from ponds, rivers, and wells Kdjdoyt H R Uepfx Abnsr • Agricultural operations • Fire-protection systems • Dewatering and water management duties Robust German engineering—very durable and easy to service.

Condition: refurbished (used), Year of construction: 2006, table length: 3,500 mm, table width: 1,500 mm, Pictures are in current condition - two Z-axes - 1 x 45° Schnedikopf , 1 x 2D - control unit will be renewed - will be sandblasted and repainted - pump optionally available - available in 12-16 weeks after order Kjdpfx Absnab Rzjnjdr Special features: - individually customizable to customer requirements - 12 months or 2,000 hours warranty (not on spare and wear parts) We offer a discount when concluding a maintenance or service contract! Contact us and we will make you a customized offer!

Year of construction: 1987, condition: excellent (used), 1 chemical standard centrifugal pump with very few operating hours. The pump is suitable for acidic condensate and aggressive acids. Also suitable for saltwater!! Manufacturer: Sulzer Model: ZA 200-4500 Material: Duplex 9.4460 / Noridur 1.4593 Flow rate: 250 m³/h Head: 27 meters at 980 rpm Shaft power: 42 kW Motor power: 75 kW NPSH: 1.6 Speed: 980 rpm Year of manufacture: 1987 Kdsdpfx Abeh S Nz Ssnjr Pump speed of 1480 rpm is also possible!! Flow rate at approximately 1480 rpm (information without guarantee) Flow rate: 430 m³/h Head: 62 meters Shaft power: 88 kW Shut-off valves and pipelines in stainless steel are also available. The material 1.4593 Noridur is very well suited for: - Chemical and process engineering industries - Sulfuric and phosphoric acid - Salt extraction and processing - Petrochemical industry - Coke plants - Textile and pulp industry - Food and sugar industry - Mining/coal extraction and handling - Flue gas desulfurization plants - Acidic, chloride-containing washing suspensions - Acidic process water - Wastewater treatment/sewage treatment plants - Offshore and marine engineering

Condition: new, Year of construction: 2025, total length: 1,500 mm, total height: 1,900 mm, total width: 1,300 mm, warranty duration: 12 months, 🧩 Custom-Made Design All booths are manufactured to order and can be customized according to customer requirements – dimensions, fan capacity, and configuration can be adapted individually. 🟦 Water Curtain Spray Booth Professional spray booth with water filtration, designed for extraction of paint mist and overspray during coating and spraying operations. The water curtain system with droplet separation ensures effective air cleaning and provides a safe and clean working environment. Thanks to its compact stainless-steel design, the booth is ideal for workshops and small coating lines. Durable, easy to maintain, and resistant to corrosion and chemicals. 🔹 Technical Specifications - Working area: 1300 × 1500 × 1900 mm (W × D × H) - Water curtain, droplet separation - Water pump: 1.1 kW - Fan: 1.5 kW, capacity 7200 m³/h - Stainless steel construction Kdjdpoxl Akyefx Abnor - Water tank with drain - Power supply: 400 V / 50 Hz 🔸 Features and Advantages - Efficient water filtration – clean air and safe workspace - Durable stainless steel construction – corrosion resistant and easy to clean - Compact size – perfect for small painting areas - Quiet and efficient operation - Easy access for maintenance and cleaning

Year of construction: 1974, condition: refurbished (used), INGRAMATIC RP2 REVISED like NEW M8x90/45 mm. Fixed die length: 115 mm. Moving die length: 130 mm. Die height: 65 mm. 410 ppm Range production: M3 - M8 Completely revised as new. Machine visible in Calolziocorte (LC) - Italy REVIEW ACCORDING TO CE. The review includes: - DISASSEMBLY AND CLEANING OF EVERY PIECE - REPLACEMENT OF ALL BEARINGS - RECTIFICATION OF GUIDES OR POSSIBLE REPLACEMENT IF NOT SUITABLE - REVIEW OF THE INTRODUCER GROUP - OVERHAUL OF THE SLIDE GROUP WITH REPLACEMENT OF BRONZE PARTS - NEW LUBRICATION SYSTEM WITH CONTROL UNIT HYDRAULICS COMPLETE WITH PUMP, LEVEL SWITCH, PRESSURE SWITCH AND DISTRIBUTORS - NEW WATER PUMP - NEW CUP VIBRATOR COMPLETE WITH PANEL VIBRATOR AND PHOTOCELL CONTROL FOR TOO FULL - REVIEW OF THE ROLLER EVACUATION GROUP - PROTECTION CASE COMPLETE WITH LAMP AND MICRO - SOLENOID VALVE INSTALLATION WITH NEW AIR SYSTEM FOR VIBRATOR AND GUIDES - NEW ELECTRICAL SYSTEM ACCORDING TO CE STANDARDS WITH INVERTER - NEW ENGINE - BELTS REPLACEMENT - RAL PAINTING INDICATED BY YOU Kdodoipm Riopfx Abnsr

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 960702A20v3001, overall weight: 200 kg, total length: 1,115 mm, total width: 555 mm, total height: 450 mm, volume flow: 280 m³/h, power: 7.5 kW (10.20 HP), input voltage: 220 V, input frequency: 50 Hz, type of input current: AC, type of cooling: water, rotational speed (max.): 1,500 rpm, warranty duration: 12 months, protection type (IP code): IP55, Leybold Sogevac SV 300 B ATEX Cat. 2 INT Special1 GB – NEW, unused, immediately available We are offering a new Leybold Sogevac SV 300 B rotary vane vacuum pump with ATEX Category 2 (internal) and water cooling. The pump is no longer in its original packaging but has never been put into operation and is in technically and visually flawless, as-new condition. Ideal for demanding applications in the chemical, pharmaceutical, and food industries, as well as for all areas with potentially explosive atmospheres. Technical Data • Model: SV 300 B WATER ATEX Cat. 2 INT Special1 GB • Design: Single-stage, oil-sealed rotary vane vacuum pump • Pumping speed: approx. 240 m³/h (50 Hz) / 290 m³/h (60 Hz) • Ultimate pressure: down to 0.08 mbar • Cooling: Water cooling (min. 600 L/h, max. 30 °C) • Certification: ATEX II (i) 2G b IIB 180 °C (50 Hz) / T3 (60 Hz) – for indoor use • Operating temperature: Ambient 10–50 °C • Connection: 3-phase, IEC motor • Condition: As new, unused, not in original packaging Kdsdpszkaw Ujfx Abnsr Special Features • ATEX-compliant design for hazardous (explosive) atmospheres • Robust, long-lasting construction – ideal for continuous operation • Low noise and vibration • Integrated oil mist separator with automatic oil return • Maintenance-friendly due to easy access to all components Fields of Application • Chemical process engineering • Pharmaceutical production • Food processing • Packaging and drying processes • Laboratory and research applications • General industry with ATEX requirements Further Details: Price: On request Delivery: Possible / Collection by arrangement Scope of delivery: Pump, original documentation, accessories as per manufacturer

Condition: excellent (used), operating hours: 4,500 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 200 mm, table length: 3,656 mm, table width: 1,956 mm, High-Performance 5-Axis Waterjet Cutting Machine Well-maintained OMAX 60120 CNC Waterjet Cutting System equipped with a 30 kW (40 HP) EnduroMAX 4060 high-pressure pump. The pump has only 4,500 operating hours, making this machine an excellent choice for companies seeking a reliable and productive waterjet system with significant remaining service life. This machine is equipped with the OMAX A-JET 5-axis cutting head, enabling bevel cutting and complex 3D machining. The A-JET head offers a tilting angle from 0° to 59°, providing exceptional flexibility for chamfers, weld preparation, and advanced contour cutting. The machine features the integrated OMAX CAD/CAM control system, allowing direct import and processing of DXF files for fast and efficient production. Technical Specifications * X / Y / Z Travel: 3,000 × 1,500 × 200 mm * Working Area: 3,000 × 1,400 × 150 mm * Table Size: 3,656 × 1,956 mm * Maximum Workpiece Load: 2,000 kg/m² * Machine Dimensions: 5,715 × 2,794 mm * Machine Height: 2,921 mm * Machine Weight (table only): 2,818 kg * Operating Weight (including water): 10,545 kg * Water Tank Capacity: 7,727 liters Control System * Integrated OMAX CAD/CAM software, Intelli-MAX® Premium * Direct DXF file compatibility * Industrial PC controller Electrical Specifications * Power Supply: 400 VAC, 50 Hz, 3-phase * Fuse Protection: 80 A High-Pressure Pump * Model: EnduroMAX 4060 * Pump Power: 30 kW (40 HP) * Operating Hours: Only 4,500 hours * Maximum Pressure: 4,100 bar * Flow Rate: 1.5-3.6 l/min * Pump Dimensions: 915 × 1,676 × 978 mm * Pre-filter: 0.2 micron * Integrated Water Pre-Booster: 6.7 bar Included Equipment * OMAX A-JET 5-axis cutting head (0°-59° tilt) * Abrasive hopper / abrasive feed system * Water treatment system * Sludge removal system Highlights * Premium OMAX 5-axis CNC waterjet cutting system * A-JET bevel cutting head with 0°-59° tilt * EnduroMAX 4060 pump with only 4,500 operating hours * Abrasive feed system included * Water treatment system included * Sludge removal system included * Integrated CAD/CAM software with direct DXF import Kdodpfx Abjzi Hhqjnor * Large cutting area suitable for a wide range of materials * Robust industrial construction * Ready for immediate operation This is a fully equipped, high-specification OMAX waterjet system offering precision, flexibility, and low operating hours. An excellent opportunity for manufacturers looking for a premium CNC waterjet solution that is ready to go straight into production.